Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Diesel Engine Governor Supply

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the procurement and delivery of a single diesel engine governor identified by NSN 2910014568950, strictly adhering to military specifications, to be furnished to a Defense Logistics Agency depot. The delivery must be completed no later than July 24, 2026, ensuring strict compliance with timing and technical requirements. The item falls under NAICS code 336360, indicating classification within the aerospace product and parts manufacturing sector, and the procurement is structured as a subcontract under the Department of Defense. Although specific performance location and point of contact details are not provided, the contract is administered by the Defense Logistics Agency, underscoring its alignment with military supply chain protocols. The solicitation was posted on July 17, 2026, and the award is linked to contract SPE7LX26FB686 under the broader agreement SPE7LX21D0087.

General Info

Procure and deliver one diesel engine governor by July 24, 2026, per military specs to DLA depot.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

336360 - Motor Vehicle Seating and Interior Trim ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement and delivery of one diesel engine governor (NSN: 2910014568950) to a DLA depot, conforming to military specifications and delivered by July 24, 2026.

Similar Contracts

Same NAICS industry code

INSULATION, THERMAL,

Solicitation # SPE7L4-26-T-5861

This contract specifies the procurement of thermal insulation under solicitation SPE7L4-26-T-5861, with a strict prohibition on the use or incorporation of Class I ozone depleting chemicals in any delivered items, overriding all other specification requirements without exempting product performance standards. Any substitute chemicals must be submitted for approval unless explicitly authorized by existing specifications. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item, identified by NSN 2540-01-529-7336 and part number 33M1127-107C, is to be delivered in a quantity of 96 units at a unit price of $96.00, totaling $9,216.00. Delivery is FOB origin with a lead time of 161 days, no quantity variance permitted, and inspection and acceptance to occur at the destination. Packaging must comply with DLA’s RP001, MIL-STD-129 for marking, and either ASTM D3951 for non-hazardous material or TQ requirement IP025 if classified hazardous under FED-STD-313, with DLA requirements taking precedence. All packaging must meet the specified Unit of Issue and Quantity per Unit Pack as outlined in the contract. The delivery address is DLA Distribution Red River in Texarkana, Texas, with a required ship date of January 19, 2027, and original delivery date of June 27, 2027. Transportation and shipping instructions are governed by DLAD Proc Notes C19 and C20.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 14 hours ago

DEADLINE

COVER, BOX, ACCESSORIES

Solicitation # SPE7L4-26-T-5863

This contract is for the procurement of a cover, box, and accessories stowage item, sole-sourced to The Boeing Company with CAGE code 81205 and part number 232T1488-22, designated as a critical application item. The delivery is required in 156 days with a firm quantity of 11 units, no variance allowed, and delivery is FOB origin with inspection and acceptance occurring at the destination. Packaging must strictly adhere to MIL-STD-2073-1E and DLA packaging requirements, with marking following MIL-STD-129 and no special marking codes applied. Palletization must comply with DLA’s packaging rules, and the item must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract enforces a complete ban on Class I ozone-depleting chemicals, superseding any conflicting specification requirements, and any substitute chemicals require prior approval unless explicitly permitted. Sampling and quality verification must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances allowed unless otherwise specified, and attributes are assigned strict verification levels or AQLs. The NSN is 2540017235694, the solicitation number is SPE7L4-26-T-5863, responses were due by August 10, 2026, and the item is classified under NAICS code 336360. All procurement requests must be manually solicited and the unit of issue is each. The contract references mandatory technical and quality requirements from the DLA Master List, with compliance controlled by the revision in effect on the solicitation issue date.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 14 hours ago

DEADLINE

PARTS KIT, PINTLE HO

Solicitation # SPE7L4-26-T-5855

The contract is for one unit of a Parts Kit, Pintle HO, identified by NSN 2540-01-699-7580 and vendor part number 8520 from Buyers Products Company DBA 9X737, classified as a Commercial Off the Shelf item. The requirement is set under solicitation SPE7L4-26-T-5855 with a delivery deadline of 20 days from award, FOB origin, and a strict zero variance on quantity. Inspection and acceptance occur at the destination site, with packaging required to comply with MIL-STD-2073-1E Appendix D for kits, and marking must follow MIL-STD-129 with special codes ZZ-ZZ. All packaging and preservation must adhere to DLA’s Packaging Requirements for Procurement, using specified methods, materials, and container codes as outlined in the documentation. The item is to be shipped via vessel using the fastest traceable means, explicitly prohibiting parcel post, with shipment directed to the Virginia Beach freight address under RDD 777. Government shipment instructions reference DLAD PROC NOTES C19 and C20 for transportation logistics. The contract includes technical and quality requirements referenced by R and I numbers from the DLA Master List, controlling based on the solicitation or award date depending on acquisition size. The required delivery date is July 24, 2026, and the point of contact for inquiries is Anna-Rachelle Betts at DLA, with additional administrative details including project code LP5 TP 3, supplier address YDA42, and government-only fields for internal tracking and distribution.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 14 hours ago

DEADLINE

Power Steering Pump Assembly SupplyThe contract calls for the supply of a compliant PUMP ASSEMBLY, POWER STEERING, VEHICULAR with NSN 2530013763637, strictly adhering to military specifications for performance, reliability, and durability. The supplier must ensure full compliance with all required packaging, labeling, and hazardous materials handling protocols to meet Department of Defense standards, including proper documentation and safe transportation procedures. This is a subcontract under the NAICS code 336360, indicating the nature of work aligns with automotive component manufacturing for defense applications. The solicitation was posted on July 28, 2026, with a response deadline of August 12, 2026, leaving a two-week window for qualified vendors to submit proposals. The contracting activity is managed by the Land Supply Chain under the Department of Defense, though no specific office address or point of contact is provided. The place of performance remains unspecified, and there is no set-aside designation indicating whether the opportunity is reserved for small businesses or other categories. All submissions must be made through the DIBBS portal using the provided link to ensure proper processing and evaluation.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Vehicular Safety Belts with Military ComplianceThe contract involves the supply of three vehicular safety belts identified by NSN 2540-01-707-4012, requiring full compliance with military packaging, marking, and delivery standards. These items must be delivered to a U.S. Naval Station located in Spain, specifically to the FPO address 09645-4000, within 20 days of contract award to ensure timely operational readiness. The solicitation is classified as a subcontract under the NAICS code 336360, indicating involvement with automotive parts manufacturing for defense applications. The Department of Defense, through its LSO COMBAT VEHICLES AND ARMAMENT division, is the contracting organization, with the response deadline set for July 31, 2026, and the solicitation posted on July 28, 2026. All deliverables must meet stringent military specifications to support vehicle safety and mission-critical requirements.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Manufacture of Vehicular Door Handle (NSN: 2540-01-719-2741)The contract requires the design, engineering, and manufacturing of six vehicular door handles meeting military specifications and form-fit-function requirements for use in military vehicles, identified by NSN 2540-01-719-2741. All work must adhere to approved technical data packages ensuring full compatibility and reliability in harsh operational environments. The project is structured as a subcontract under the NAICS code 336360, targeting specialized manufacturing capabilities within the defense industrial base. Performance is designated for New Cumberland, Pennsylvania, with a deadline for responses set for August 10, 2026, and the solicitation was posted on July 28, 2026. The contracting activity隶属于 the Department of Defense through the Land Supply Chain organization, indicating this is part of a broader procurement effort to support military vehicle readiness and sustainment.

LAND SUPPLY CHAIN

POSTED

DEADLINE

BOX, ACCESSORIES STO

Solicitation # SPE7L4-26-T-5847

This contract pertains to the procurement of a box and accessories under NSN 2540-01-666-5848, with a quantity of eight units at a unit price of $8.00, totaling $64.00. The delivery is to be made FOB origin within 100 days, with no tolerance for quantity variance—exactly eight units must be supplied. Inspection and acceptance occur at the destination, and all packaging must comply with DLA’s master technical and quality requirements, superseding ASTM D3951 when applicable. Hazardous materials must be packaged per Fed-Std-313 and TQ requirement IP025; non-hazardous items must follow ASTM D3951 unless overridden by DLA standards. All packaging and labeling must adhere to MIL-STD-129, and palletization must conform to DLA Packaging Requirements RP001. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with specific instructions for transportation referenced in DLAD Proc Notes C19 and C20. The required ship date and original delivery date are both November 19, 2026, under solicitation SPE7L4-26-T-5847, issued by the Department of Defense’s LSO Combat Vehicles and Armament office.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

HEATING-VENTILATION

Solicitation # SPE7L4-26-T-5849

The contract pertains to the procurement of a single unit of heating-ventilation equipment, identified by NSN 2540-20-010-9227 and part number 13-12903, with a required delivery within five days of award. The item must be shipped FOB origin via the fastest traceable means, explicitly prohibiting parcel post, and delivered to the Maritime Prepositioning Force at Blount Island, Jacksonville, Florida. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersedes all other standards including ASTM D3951; if deemed non-hazardous per FED-STD-313, commercial packaging per ASTM D3951 is acceptable only if not overridden by a DLA requirement, and if hazardous, packaging must meet TQ requirement IP025. All packaging and labeling must adhere to MIL-STD-129, with palletization strictly following RP001 specifications, and the unit of issue is one each. The contract includes no quantity variance and requires inspection and acceptance at destination. The solicitation number is SPE7L4-26-T-5849, with a response deadline of August 10, 2026, and the required delivery date is July 28, 2026. Point of contact for inquiries is Anna-Rachelle Betts, and the contracting office operates under the Department of Defense, specifically LSO Combat Vehicles and Armament. All technical and quality provisions referenced via R or I numbers are governed by the current edition of the DLA Master List accessible online, with revisions tied to the solicitation or award date depending on acquisition size.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Solicitation # SPE7L4-26-T-5845

The contract solicitation SPE7L4-26-T-5845 seeks 28 units of PIN, PINTLE with NSN 2540016960708 at a unit price of $28.00, totaling $784.00, under FOB Origin terms with delivery required 147 days after award, targeting an original delivery date of October 19, 2026, and a need ship date of January 5, 2027. The item must be packaged in strict accordance with MIL-STD-2073-1E, using QUP 001, preservation method 10 (CLNG/DRY: 1), corrugated paper wrap, no cushioning, unit container D3, intermediate container E5, and pack code U, with palletization following DLA’s RP001 packaging requirements. Marking must comply fully with MIL-STD-129, with no special marking required, and all containers must bear GS1-compliant barcodes for traceability. Inspection and acceptance occur at the destination facility—DDSP New Cumberland, 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002—per FAR 52.246-2, and invoicing must be submitted exclusively through WAWF. The contract incorporates by reference the DLA Master List of Technical and Quality Requirements, along with numerous FAR and DFARS clauses including those for combating trafficking in persons, employment eligibility verification, sustainable products, hazardous materials identification, cybersecurity safeguarding per NIST SP 800-171, export controls, prohibition of hexavalent chromium, and restrictions on acquiring defense telecommunications equipment from Communist Chinese military companies. Offerors must self-certify their small business status and socioeconomic designations, provide UEI and CAGE codes where applicable, and disclose any provision of covered defense telecommunications equipment. All submissions are required through the DIBBS portal by August 10, 2026, and the contract type remains unspecified pending award, with payment terms subject to WAWF submission protocols and compliance with accelerated payment requirements for small business subcontractors. The solicitation does not include an evaluation factors section or detailed statement of work beyond the technical specifications and regulatory compliance obligations embedded in the referenced standards and clauses.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

BELT, VEHICULAR SAFE

Solicitation # SPE7L4-26-T-3948

The contract pertains to the procurement of three vehicular safety belts, identified by NSN 2540-01-707-4012 and part number 537902664071, under solicitation SPE7L4-26-T-3948. The items must be delivered within 20 days to the destination FOB, with zero tolerance for quantity variance, and are subject to inspection and acceptance at the delivery point. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping, and container standards, while marking follows MIL-STD-129 with no special marking required. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date based on acquisition size. The delivery address is in FPO AE 09645-4000, with the freight shipping destination at Naval Station Rota in Spain. The contract calls for palletization in accordance with DLA packaging guidelines and references transportation protocols outlined in DLAD Proc Notes C19 and C20. The required delivery date is April 13, 2026, and the funding and administrative details are designated for government use only.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

HANDLE, DOOR, VEHICUL

Solicitation # SPE7L1-26-T-886G

This contract is for the supply of a door handle for vehicular applications under solicitation SPE7L1-26-T-886G, with a total quantity of six units at a unit price of $6.00. The item is identified by NSN 2540-01-719-2741 and must comply with specific technical and quality standards referenced through R and I numbers in the DLA Master List of Technical and Quality Requirements. Design and manufacturing must adhere to multiple referenced technical data packages and drawings, all with defined revisions dated between 2010 and 2025, including a critical revision effective January 21, 2025. The product is designated as a critical application item, and use of Class I ozone-depleting chemicals is strictly prohibited, with any substitute chemicals requiring prior approval. The supplier must follow DLA packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129, with no special marking required. Packaging must be palletized according to DLA guidelines and shipped FOB origin with delivery due in 112 days, targeting an original required delivery date of April 24, 2027. Inspection and acceptance occur at the destination, and the shipment must be sent to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract enforces configuration change management procedures, qualified products lists, and certificate of conformance protocols unless otherwise suspended by a quality assurance letter. No quantity variance is permitted, and the unit of issue is each. All requirements supersede any conflicting specification language, particularly regarding environmental restrictions and quality controls.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of New Cummins Fuel PumpsMetro Houston is seeking qualified suppliers to procure and deliver new, unused Cummins fuel pumps for maintenance of its transit bus fleet, ensuring full compliance with established technical specifications and commercial warranty requirements. The requirement is issued as a subcontract under NAICS code 336360, targeting vendors capable of providing reliable, factory-original components that meet operational standards for heavy-duty transit applications. Bidders must respond by the deadline of August 26, 2026, with all submissions managed through the official BonfireHub platform. There is no set-aside designation indicated, and performance is expected to support fleet maintenance operations without geographic constraints specified beyond the agency’s service area.

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

VALVE, SAFETY RELIEF

Solicitation # SPE7MC-26-T-158J

A safety relief valve is being procured under contract SPE7MC-26-T-158J by the Defense Logistics Agency for delivery to the USS BOXER LHD 4 at FPO AP 96661, with a required delivery date of July 27, 2026. The contract specifies two identical items, each priced at $1.00, with no variance allowed in quantity, and delivery must be made FOB destination within 20 days. The valve has a carbon steel body with flanged end connections and must comply with strict environmental and safety standards, including a complete prohibition on ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, except where explicitly permitted for functional uses in batteries, instruments, or weapon systems as defined by NAVSEA, with additional containment requirements for portable devices. Packaging must follow MIL-STD-2073-1E and MIL-STD-129 for marking, with palletization adhering to DLA’s packaging requirements, and all materials must be properly identified using the assigned NSN 4820013387425. The contract references the DLA Master List of Technical and Quality Requirements, which governs all technical and quality specifications, and the procurement is a total small business set-aside under NAICS code 332911, with submissions directed to DLA and managed via the DIBBS system.

Industrial Valve Manufacturing

POSTED

about 14 hours ago

DEADLINE

DRESSING, OCCLUSIVE, ADH

Solicitation # SPE2DS-26-T-284U

The contract solicitation is for an occlusive adhesive dressing identified by NSN 6510-01-234-8943, with a single-unit purchase request numbered 7017660495. The solicitation, issued under number SPE2DS-26-T-284U by the Defense Logistics Agency under the Department of Defense, was posted on July 29, 2026, and requires responses no later than August 4, 2026. The procurement is classified as a federal solicitation with no specified set-aside type or NAICS code, indicating it is open to general federal contractors. The place of performance and point of contact details are not provided, but the solicitation can be reviewed through the official DIBBS portal using the provided UI link.

POSTED

about 14 hours ago

DEADLINE

LIGHT SPECIAL PURPO

Solicitation # SPE8E7-26-Q-0270

The contract specifies the procurement of item 6220-01-549-4174, identified as LIGHT SPECIAL PURPO, with a total quantity of 110 units distributed across eight line items ranging from 2 to 29 units each. All deliveries must comply with a strict zero percent variance in quantity and are subject to inspection and acceptance at the destination point. Delivery is required within 30 days after order date, with free on board terms originating from the supplier’s location. Packaging must adhere to MIL-STD-2073-1E standards with specific preservation methods, unit containers, and packing levels, while marking must fully comply with MIL-STD-129 without any special labeling. Palletization must conform to DLA Packaging Requirements for Procurement (RP001), and hazardous material handling is governed by IP025, which mandates packaging per FED-STD-313 and TQ requirement IP025 if deemed hazardous; otherwise, commercial packaging under ASTM D3951 is acceptable, with all DLA Master List requirements taking precedence. The supplies are destined for multiple U.S. military and foreign military locations, including Royal Jordanian Air Force and U.S. Army bases in Hawaii and Jordan, with freight and marking instructions tied to specific TCN and RDD identifiers. The contract is issued under solicitation SPE8E7-26-Q-0270 by the Defense Logistics Agency, referencing the DLA Master List of Technical and Quality Requirements for all technical and quality specifications.

POSTED

about 14 hours ago

DEADLINE

Solicitation # SPE8ES-26-Q-0090

This procurement under solicitation SPE8ES-26-Q-0090 is for enamel designated by NSN 8010-00-286-7749 in quantities of four and two containers, each containing five gallons, for delivery to Diego Garcia and other government locations. The contract requires strict compliance with Department of Defense packaging, marking, and shipping standards including MIL-STD-2073-1E and MIL-STD-129, with special handling for Type II shelf-life items that must retain at least 85% of their 24-month shelf life upon receipt. The product must originate from manufacturers approved on both the Qualified Products List and the Approved Products List maintained by the Performance Review Institute and Master Painters Institute respectively, and must conform to MPI #9 Revision D dated 05/01/2014. Hazardous material shipping requirements are governed by OSHA’s revised Hazard Communication Standard, mandating submission of Safety Data Sheets and compliant labels prior to award, along with employee training on the Globally Harmonized System. This acquisition is conducted under simplified procedures authorized by 41 U.S.C. 1901 and Class Deviation 2026-O0028, with firm fixed pricing and zero tolerance for quantity variance. Delivery is required within 60 days after issuance of the order, with inspection and acceptance occurring at origin. The item is subject to Controlled Unclassified Information (CUI) requirements, and if Covered Defense Information or export-controlled technical data is involved, the contractor must comply with DFARS clauses 252.204-7012, 252.204-7019, and 252.204-7020. Noncompliance with CUI, shelf-life, packaging, or approval list requirements may lead to cancellation of purchase orders. All markings must reflect special code 33 for Type II shelf life and adhere to MIL-STD-129, with freight addressed to FPO AP 96595-0004 and specific shipping instructions governed by DLAD procedural notes.

Paint and Coating Manufacturing

POSTED

about 14 hours ago

DEADLINE

MARKER, IDENTIFICATI

Solicitation # SPE8E6-26-T-3922

This contract issued by the Defense Logistics Agency under solicitation number SPE8E6-26-T-3922 specifies the procurement of two units of a marker and identifier with NSN 7690998418549 and part number 187-5558, priced at $0.00 per unit for a total of $0.00, with delivery required within five days of award. The item must be delivered FOB origin and inspected and accepted at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with all labeling and palletization adhering to DLA’s Packaging Requirements for Procurement, which supersede any conflicting standards. The DLA Master List of Technical and Quality Requirements governs all technical specifications, and all supplies must be marked and labeled according to government standards, with government identification removed from non-accepted items. The shipment must be sent via traceable means, excluding parcel post, to the designated delivery point in Sioux City, Iowa, with the same address used for marking and freight. The contract references specific DLA directives including RP001 and RD003, and includes a provision for covered defense information. The required delivery date is July 24, 2026, with a solicitation response deadline of August 10, 2026, and the contract is classified under NAICS code 323111 for federal procurement.

Commercial Printing (except Screen and Books)

POSTED

about 14 hours ago

DEADLINE

SUCTION UNIT, AIRWAY KI

Solicitation # SPE2DS-26-T-284B

The contract solicitation is for a Suction Unit, Airway KI with NSN 6515-01-364-1047, under purchase request 7017673928 for a quantity of two units. It is issued by the Defense Logistics Agency under the Department of Defense through solicitation number SPE2DS-26-T-284B, with the posting date of July 29, 2026, and a response deadline of August 4, 2026. The solicitation is classified as a federal procurement with no specific set-aside designation, and the place of performance and office address details are not specified, though the country code is listed as the United States. Interested parties can access the full solicitation through the DIBBS portal using the provided UI link.

Surgical Appliance and Supplies Manufacturing

POSTED

about 14 hours ago

DEADLINE

FILTER-DRIER, REFRIGERA

Solicitation # SPE8E8-26-T-4910

The contract specifies the procurement of a Filter-Drier for Refrigerant, identified by NSN 4130-01-367-5748 and part number BFK-083S from Emerson Electric Co ALCO Controls, with a quantity of four units to be delivered within 20 days of contract award. Delivery is FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. All packaging must comply with ASTM D3951 and MIL-STD-129, with DLA’s Master List of Technical and Quality Requirements taking precedence over any other standards. Packaging and palletization must adhere to DLA’s RP001 requirements, and parcel post is strictly prohibited—shipment must be via traceable means. The delivery address is NAVFACSYSCOM MID-ATLANTIC in Norfolk, VA, with specific building and contact details provided for freight shipments. The required delivery date is July 27, 2026, and the contract is governed under solicitation SPE8E8-26-T-4910, which incorporates mandatory technical and quality specifications referenced through R and I numbers from the DLA Master List. The contract is issued under the DoD unit of issue system and is subject to Covered Defense Information protocols. The point of contact is Alexis Selby of the Defense Logistics Agency, and the solicitation is classified under NAICS code 333415 for industrial machinery manufacturing.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

LADDER, SAFETY STEP

Solicitation # SPE8E5-26-T-3728

The contract pertains to the procurement of one unit of a Safety Step Ladder, identified by NSN 5440016969999 and part number 10403 from LITTLE GIANT LADDER SYSTEMS, LLC, under solicitation SPE8E5-26-T-3728. Delivery is required within 20 days of contract award, with FOB Origin terms and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and the item must be packaged in strict accordance with ASTM D3951, with all labeling and marking compliant with MIL-STD-129 and DLA’s packaging requirements RP001. Palletization must adhere to DLA’s specified standards, and government-issued identification must be removed from non-accepted supplies per RQ011. Technical and quality requirements referenced through R- and I-numbers from the DLA Master List override any conflicting standards. Shipping must be conducted via traceable freight, explicitly prohibiting parcel post, to the designated delivery point at Naval Air Station Whidbey Island in Oak Harbor, WA. The contract incorporates stringent controls for documentation, source approval, and handling of covered defense information under RD003. The unit of issue is each, with a total price of $1.00, and the item is classified under NAICS code 238110. The original required delivery date is July 23, 2026, with procurement managed by the Defense Logistics Agency. A designated point of contact, Brandon Wicker, can be reached for inquiries, and all submissions must align with the solicitation’s deadlines and formatting requirements. The contract also specifies internal government identifiers and distribution codes for tracking, and final delivery must be coordinated using the provided TCN and project details to ensure compliance with DLA’s logistics protocols.

Poured Concrete Foundation and Structure Contractors

POSTED

about 14 hours ago

DEADLINE

FLASHLIGHT, LAZERBRI

Solicitation # SPE8E7-26-Q-0274

The contract pertains to the procurement of one box containing twelve LazerBrite model LB2-105-12B flashlights, identified by NSN 6230-01-505-5272, under solicitation SPE8E7-26-Q-0274. The supplier, Tactical Lighting Solutions LLC, is required to deliver the items in strict compliance with DLA packaging standards outlined in RP001, including adherence to MIL-STD-129 for marking and labeling, and commercial packaging per ASTM D3951 unless federal hazardous material standards under FED-STD-313 apply, in which case TQ requirement IP025 governs. All technical and quality requirements referenced by R or I numbers are sourced from the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting commercial standards. The contract enforces a firm fixed price with zero tolerance for quantity variance, and delivery must occur within 30 days after award, with both inspection and acceptance points at the destination. Shipment is to be routed to the USS RAFAEL PERALTA DDG 115 via FPO AP 96694-1500, and transportation procedures must follow DLAD PROC NOTES C19 and C20. The item is covered under DLA’s procurement framework, with controlled access to covered defense information, and pricing, delivery, and compliance terms are binding with no flexibility.

Broom, Brush, and Mop Manufacturing

POSTED

about 14 hours ago

DEADLINE

Solicitation # SPE8E5-26-T-3730

The contract specifies the procurement of aluminum step ladders with the NSN 5440-00-512-0311 and part number 206106ACS200, requiring a quantity of four units to be delivered within 20 days FOB origin. The ladders must comply with all applicable DLA Master List of Technical and Quality Requirements, which override any general standards such as ASTM D3951, and packaging must adhere to MIL-STD-129 for marking and labeling, with palletization following DLA packaging guidelines. Delivery is directed to a U.S. Air Force prepositioning site in Al Udeid Air Base, Qatar, with shipping instructions referencing specific DLA procedural notes and using the APO AE 09898 address for parcel posting. The unit price is set at $4.00 per unit, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The contract is issued under solicitation SPE8E5-26-T-3730, with a response deadline of August 10, 2026, and a required delivery date of July 27, 2026, to be fulfilled by approved suppliers including Louisville Ladder Inc, Bauer Corp, and Green Bull Inc. All items must be shipped using TAC 2, labeled as non-mailable, and tracked under RDD 777 with the assigned project code 9GS TP 2.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

PLATE, INSTRUCTION

Solicitation # SPE8E6-26-T-3917

This contract pertains to the procurement of an instruction plate with NSN 9905-01-138-4840, for a quantity of 10 units, under solicitation SPE8E6-26-T-3917, issued by the Defense Logistics Agency on behalf of the Department of Defense. The delivery is required within 20 days of award, and responses must be submitted by August 10, 2026. The contract incorporates technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and government identification must be removed from any non-accepted supplies. The associated drawings are accessible only during the open solicitation period via the DIBBS portal. The item falls under NAICS code 339950 and is subject to MIL-STD-130N for identification marking of U.S. military property, as well as supplemental packaging directives. All procurement activities are managed through the DIBBS system, with primary point of contact being Kathleen Selover.

Sign Manufacturing

POSTED

about 14 hours ago

DEADLINE

CLOTH, CLEANING

Solicitation # SPE8E5-26-T-3726

The contract is for the procurement of 1 box of cleaning cloths with NSN 7920-01-614-3522 and part number 599306, issued by the Defense Logistics Agency under solicitation SPE8E5-26-T-3726. The unit of issue is a box containing 100 cloths, with delivery required within 20 days to the Marine Corps Air Facility in Quantico, Virginia, under FOB origin terms and no tolerance for quantity variance. The item is classified as a Type 2 shelf life item with a 12-month extendable lifespan, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements including marking per MIL-STD-129 with special shelf life code 33. Packaging and shipping must adhere to traceable methods only, prohibiting parcel post, and must follow hazardous materials handling procedures. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and the revision in effect at the RFP issue date applies. The item is subject to Covered Defense Information controls and government identification removal for non-accepted supplies. The delivery point is destination, with inspection and acceptance also occurring at destination. The required delivery date is July 30, 2026, and the contract includes specific shipping instructions, a designated point of contact, and federal accounting details for HMX-1 supply operations.

Broom, Brush, and Mop Manufacturing

POSTED

about 14 hours ago

DEADLINE