Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Defense was posted on March 1, 2023. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Disassemble and Disposal Of Vertical Carousel

Closed
N6883623Q0106Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333922
New
DIBBS
PALLET, MATERIAL HANDLI
Solicitation # SPE8EF-27-T-0129
Solicitation SPE8EF-27-T-0129 is a total small business set-aside procurement issued by DLA Troop Support for the supply of material handling pallets under NSN 3990002236529. The requirement consists of two line items totaling 63 bundles, with 13 bundles destined for DLA Distribution Warner Robins in Georgia and 50 bundles for DLA Distribution San Joaquin in California. The original required delivery date is March 6, 2027, with a need ship date of March 28, 2027, and a delivery lead time of 141 days after receipt of order. Technical specifications require pallets to be manufactured according to MIL-DTL-15011K(2) and specific reference drawings. Material requirements stipulate that oak or chestnut wood must be bark-free, square-edged, and maintain a moisture content not exceeding 19 percent. Packaging must comply with ASTM D3951 and RP001, with marking and labeling adhering to MIL-STD-129. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. The contract incorporates several critical regulatory clauses, including the Buy American and Balance of Payments Program, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Payment processing is mandated through the Wide Area WorkFlow system. Offerors must be registered in the System for Award Management and submit quotes via the DIBBS portal.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

3 days ago

DEADLINE

in 8 days
NAICS: 333922
New
Federal
Kardex Megamat and Onsite Installation
Solicitation # 511976
UT-Battelle, LLC, the management and operating contractor for Oak Ridge National Laboratory (ORNL), is soliciting firm fixed price quotes for the procurement and onsite installation of three Kardex Megamat units. The specific equipment required consists of 480V 3Phase units with 12 shelves measuring 96.5x16.9x12.3 inches. This procurement is governed by FAR 52.211-6, allowing for brand name or equal products, provided the seller is an authorized reseller and the items are authorized for use in the United States. The award will be granted to the lowest priced, technically acceptable proposal. Proposals must be submitted via email by October 30, 2026, at 5:00 PM EST. Offerors are required to provide a firm fixed price quote, a proposed delivery schedule, and a specific section addressing any exceptions or non-compliance to avoid being deemed non-responsive. Delivery is FOB Destination for domestic shipments, and all onsite personnel must be U.S. citizens or registered foreign nationals via the Foreign Access Central Tracking System. Additionally, the successful contractor must maintain general, professional, and cyber liability insurance of at least 2 million dollars each, with carriers rated A-/VIII or better by A.M. Best. Compliance with SAM registration and various FAR flowdown clauses regarding anti-kickback procedures and subcontractor sales is mandatory.
Ornl Ut-Battelle Llc-Doe Contractor

POSTED

4 days ago

DEADLINE

in 1 day
NAICS: 333922
SLED
CP25013
Solicitation # CP25013
The Port of Lake Charles is soliciting proposals for the procurement of one new portal mounted traveling import hopper and related parts for its Bulk Terminal in Sulphur, Louisiana. The project is classified under heavy construction for wharves, docks, and harbor improvements, with specific requirements for pneumatic tubes and conveyors. The solicitation includes an option for the owner to purchase one additional identical unit within twelve months of the initial handover. Proposals must be submitted by November 20, 2026, and must include a base proposal, an option proposal for the second unit, and any alternate proposals. Required documentation includes a commercial summary, technical data summary, and a technical deviation form, all submitted in Excel format alongside a PDF and hard copy of the full proposal. The selected contractor must maintain local sales support in the Southeast United States and provide a five-year reference list of similar installations. Technical requirements emphasize strict adherence to UL standards and NFPA 70E for electrical safety, with specific mandates for stainless steel or brass nameplates and English labeling. The contract utilizes a milestone-based invoicing system with payments made via wire transfer within 45 days of approval. Quality assurance is rigorous, requiring inspections at both fabrication and delivery sites, the provision of a mobile office trailer on-site, and the issuance of formal certificates for pre-shipment, substantial completion, and final acceptance. Award evaluation is based on a 125-point scale to determine the order of contract negotiations.
Port of Lake Charles

POSTED

9 days ago

DEADLINE

in 22 days

General Info

NAICS

333922 - Conveyor and Conveying Equipment Manufacturing

Place of Performance

Kings Bay, GA, 31547, USA

Set-Aside

SBA

Documents

2

Trident Refit Facility - Disassemble and Disposal of Vertical Carousel SOW

PDF, High priority: read this firstsow
High

Kardex+Photo Document

PDF, Low priorityother
Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

2 updates
PhaseClosed
Posted

Sources Sought

Notice updated

The notice description changed.

Notice updated

Notice details unchanged. Attachments may have changed.

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Flt Logistics Ctr Jacksonville
Contacts1 person available
OfficeJACKSONVILLE, FL, 32212-0097, USA
Office AddressJACKSONVILLE, FL, 32212-0097, USA
Contacts
Amanda Huddleston

Full Description

Show more
This is a Sources Sought Notice to determine the availability of potential sources for an anticipated requirement for Disassembly and Disposal of (1) Kardex Vertical Carousel in support of the Trident Refit Facility in Kings Bay Naval Submarine Base, GA. Additional detailed information is provided on the attached draft Statement of Work (SOW). As part of its market research, Naval Supply Systems Command (NAVSUP), Fleet Logistics Center Jacksonville (FLCJ) is issuing this Sources Sought notice to determine if there exists an adequate number of qualified interested contractors capable of fulfilling this requirement as further described in the Draft SOW. The Government may use the responses to this notice for information and planning purposes. The Draft SOW describes only the currently contemplated possible scope of services and may vary from the work scope in a final SOW included in any Request for Quotations (RFQ). A Firm Fixed Price (FFP) contract is anticipated. The anticipated period of performance is 15 March 2023 - 14 March 2024. The North American Industrial Classification System (NAICS) code for this acquisition is 333922, Conveyor and Conveying Equipment Manufacturing. Offerors possessing the requisite skills, resources and capabilities necessary to perform the stated requirement are invited to respond to this source sought notice via the submission of an executive summary, no more than five (5) pages in length. Responses must use twelve point Times New Roman font. In your response provide a brief description of the capability, resources, technical competencies and organizational experience relative to the key task areas. Standard brochures and/or paraphrasing of the Draft SOW will not be considered sufficient to demonstrate the capabilities of an interested party. The submission should include the following information: 1) company name, address, and point of contact with corresponding phone number and e-mail address; 2) Unique Identifier Number, business size and classification; and 3) relevant corporate experience information. Relevant corporate experience information is defined as experience (within the past five years) that is of the same or similar services to that which is described herein and a technical description of ability to meet the requirement (2 references). The corporate experience should include the applicable contract number, contract period of performance, a brief description of the services provided, and the relevancy of the services to the proposed requirement. A customer point of contact with corresponding telephone number and e-mail address should also be included. This Sources Sought notice is only for the purpose of identifying potential sources as part of NAVSUP FLCJ's market research. No RFQ exists, therefore, do not request a copy of the RFQ. Please restrict all responses to nonproprietary information. Responses to the notice will not be returned. Responders are solely responsible for all expenses associated with responding to this notice. NAVSUP FLCJ will not pay for information received in response to this notice. Do not submit pricing information in response to this SSN. All submissions are required to be submitted via email to contact@example.gov no later than 10:00 AM EST on 02 March 2023. Submissions shall contain any questions concerning this RFI.

More opportunities from Department Of Defense → Navsup Flt Logistics Ctr Jacksonville

Same awarding agency

NAICS: 332323
Federal
Precision Metal Framing and Housing FabricationThe contract involves the fabrication of precision metal frames and enclosures specifically designed for the Heated Window Assembly, ensuring the components meet exacting standards for structural integrity and seamless integration into naval vessel systems. The work requires advanced manufacturing capabilities to produce components that are compatible with the demanding environmental and operational conditions of naval platforms, with strict attention to dimensional accuracy, material specification, and durability. The frames and housings must be engineered to support heating functionality while maintaining mechanical stability under vibration, thermal cycling, and corrosive sea exposure. Performance of the work is designated to take place in Jacksonville, Florida, with the contract issued under the NAICS code 332323 for fabricated metal product manufacturing. This is a subcontract arrangement within the Department of Defense procurement ecosystem, administered by Naval Supply Systems Command Fleet Logistics Center Jacksonville. The contract was posted on July 13, 2026, and the technical requirements reflect critical support for naval fleet readiness, where component reliability directly impacts crew safety and operational effectiveness. All deliverables must align with applicable military specifications and undergo rigorous quality verification prior to acceptance.
Ornamental and Architectural Metal Work Manufacturing

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 327215
Federal
Tempered, Heated Glass Fabrication for Aerospace WindowThe contract involves the fabrication of precision tempered glass with integrated heating capability for use in the Heated Window Assembly identified by Part No. CC-10367-1, specifically for aerospace applications. The work is scoped under a subcontract with a NAICS code of 327215, indicating classification within the glass product manufacturing industry, and is tied to the Department of Defense through the Naval Supply Systems Command Fleet Logistics Center Jacksonville. Performance of the contract is designated to occur in Jacksonville, Florida, with a zip code of 32228, and the solicitation was posted on July 13, 2026. The heated glass component must meet stringent aerospace standards for durability, optical clarity, and thermal performance under extreme environmental conditions. As a subcontract, the primary contractor is expected to manage compliance, quality assurance, and delivery timelines aligned with DoD requirements, though no set-aside type or specific point of contact is detailed. The contract supports critical defense systems requiring reliable window assemblies that maintain functionality through icing, temperature fluctuations, and high-stress operational environments. Execution will require advanced manufacturing techniques to integrate heating elements into tempered glass without compromising structural integrity or optical performance.
Glass Product Manufacturing Made of Purchased Glass

POSTED

4 months ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS