Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Homeland Security was posted on May 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Dock-Side (DS): USCGC HEALY (WAGB 20) Fiscal Year 2027

Closed
70Z08526IPHEALYDSFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 33661
Federal
Drydock Repairs USCGC HATCHET (WLIC-75309)
Solicitation # 70Z08527QIBCT0002
Solicitation 70Z08527QIBCT0002 is a total small business set-aside for an Indefinite Delivery - Requirements Contract under FAR Part 12 to provide drydock repairs for the USCGC HATCHET (WLIC 75D), a 75-foot inland construction tender homeported in Galveston, Texas, and the USCG 68B Barge. The work will be performed at the contractor's facility over a projected 70-day period from March 9, 2027, to May 19, 2027. The comprehensive scope of work includes 88 detailed items such as hull plating inspection and renewal, propulsion shafting overhaul, tank cleaning and preservation, and structural repairs. All work must adhere to SFLC Standard Specifications and other referenced military and industry standards, including MIL-STD-2191 and ASTM F992. Quotations are due by November 9, 2026, at 11:00 am PST and must remain valid for 120 days. Award will be granted to the responsible vendor offering the lowest evaluated price among those rated acceptable for non-price factors, which include a demonstration of technical capability and a satisfactory past performance record on at least three relevant contracts completed within the last three years. The government will evaluate the total price, lay day rates, and a composite labor rate, which was corrected via Amendment A0001 to 750 hours. Invoicing is processed through the Invoice Processing Platform or MarkView, with a general requirement that CLINs reach 25 percent completion before they can be invoiced.
CG-SEA-C22

POSTED

20 days ago

DEADLINE

in 11 days

AI Contract Overview

Show more

The United States Coast Guard Surface Forces Logistics Center is seeking industry input for the Fiscal Year 2027 dock-side maintenance and recapitalization of the USCGC HEALY, the Coast Guard's largest vessel, homeported in Seattle, Washington. This sources sought notice, issued under solicitation number 70Z08526IPHEALYDS and published on May 5, 2026, seeks to assess vendor capability, availability, and interest ahead of a planned Request for Proposal release in July 2026. The anticipated period of performance runs from January 5, 2027, through May 9, 2027, during which extensive maintenance tasks will be performed at the vessel’s homeport on Alaskan Way S. The scope encompasses over forty distinct work items including recapitalization of science data and CG One network infrastructure, overhaul of main diesel engines, lube and fuel oil purifiers, auxiliary diesel starters, and mooring capstans; inspection and testing of electrical systems, winches, cranes, refrigeration, boilers, and damage control systems; cleaning of sewage and grey water tanks; preservation of decks and superstructure; and upgrades to impressed current cathodic protection and steam traps. Coordination with GE Power, the original equipment manufacturer for science winch control systems and cycloconverters, will be necessary to manage laydown areas and avoid operational conflicts. No cost or pricing data is required in responses, which must be submitted via SAM.gov using Attachment 1, the HEALY DS27 Questionnaire, by May 20, 2026. The requirement falls under NAICS code 336611 with a size standard of 1,300 employees and does not constitute a commitment to award a contract; the government will not reimburse any costs incurred in responding to this notice. All submissions will be used solely to evaluate industry interest and develop the future solicitation.

General Info

USCG seeks vendors for dock-side maintenance on Cutter HEALY in Seattle, January-May 2027.

NAICS

33661

Place of Performance

WA, 98134, USA

Set-Aside

NONE

Documents

1

USCGC HEALY DS27 Fiscal Year 2027 Sources Sought Questionnaire

DOCX, Low prioritysources-sought
Low

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Sources Sought

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Homeland Security → Sflc Procurement Branch 2(00085)
Contacts1 person available
OfficeALAMEDA, CA, 94501, USA
Office AddressALAMEDA, CA, 94501, USA
Contacts

Full Description

Show more

The United States Coast Guard (USCG) Surface Forces Logistics Center (SFLC) is seeking responses from industry to determine capability and interest in performing the Fiscal Year 2027 (FY27) for the United States Coast Guard Cutter (USCGC) HEALY Dock Side. The USCG is interested in determining overall vendor interest, availability, and capability to perform this work at the USGC HEALY’s homeport.


The anticipated Request for Proposal (RFP) release date is in July 2026. Planned availability and RFP dates are subject to change. Estimated period of performance is Jan. 5, 2027 through May 9, 2027.


In addition, no cost or pricing data is required in the vendor’s response to this Sources Sought Notice. All responsible sources may submit a capability statement, which will be considered by the agency; see Attachment 1; Attachment 1 HEALY DS27 Questionnaire.


Background Information:


The USCGC HEALY is homeported in Seattle, WA at 1519 Alaskan Way S., Seattle, WA 98134. The USCGC HEALY, the Coast Guard's largest vessel, is 420 feet long, 82 feet wide, drafts 31 feet (at full load), and weighs 16,660 long tons (at full load).


Note that it is excepted that during performance of the dock side there will be a significant amount of work that will be done on the Science Winch Control Systems, Cycloconverters, and the Main Diesel Engines by the Original Equipment Manufacturer (OEM), GE Power, Power Conversion, that may require laydown area on the pier, as well as regular coordination with the Coast Guard and the OEM to avoid overlap in work and other issues that may arise.


Significant work items include (but not limited to):


  • Fire Prevention, Provide
  • Temporary Services, Provide (Cutter)
  • Recapitalize Science Data Network Infrastructure (SLEP)
  • Recapitalize CG One Network Infrastructure (SLEP)
  • Recapitalize Ice Radar (SLEP)
  • 28 Volt DC Helo Power Supply, Load Test, Perform
  • 400 Hz Electrical Power Distribution System, Load Test and Thermographic Inspection
  • Impressed Current Cathodic Protection, Upgrade
  • Oceanographic Winch, Inspect and Test
  • Scientific and Ocean Engineering Systems, Control System Groom and Indicator Calibration
  • Damage Control and Fire Fighting Systems, PMS
  • Oily Water Separator, Annual Maintenance
  • Auxiliary Seawater System (ASW) Orifice Plate, Renew
  • Aux Diesel Generator Starter (SLEP)
  • Steam Coil Pre-Heaters, Inspect and Test
  • Refrigeration Plant, Maintain
  • Boiler Annual Maintenance
  • Bow Crane, Annual Inspect and Test
  • Internal Hoists, Maintenance, Inspection and Test
  • Grey Water Holding Tanks, Clean and Inspect
  • Sewage Piping, Clean and Flush
  • Sewage Holding Tanks, Clean and Inspect
  • Main Motor Lube Oil Tank Heater, Inspect
  • Ship Service Air Compressor, Overhaul
  • Fuel Oil Purifier (FOP) Overhaul
  • Lube Oil Purifier (LOP) Overhaul
  • Relocate Cycloconverter Strainers (SLEP)
  • Recapitalize MSW & ASW Valves (SLEP)
  • Science Sea Water Pump Strainer (SLEP)
  • A-Frames, Annual Inspection
  • Science Van Monorail System, Overhaul
  • Oceanographic Winch, Inspect and Test
  • Steam Trap, Renew
  • Steam Trap, Replace
  • Padeyes, NDT Inspection
  • Distilling Plant Condensate Dump Valve, Replace
  • Mooring Capstan, Level2, Overhaul
  • Port & Starboard Miranda Davit, Biennial Inspect and Repair
  • Aft Crane (Starboard), Annual Maintenance, Inspect and Repair
  • Aft Articulating Crane (Port), Annual Maintenance, Inspect and Repair
  • Main Diesel Engine (MDE) Exhaust Stack Uptakes, Inspect
  • Deck Crane (Starboard), TB 100-55, Annual Maintenance, Inspect and Repair
  • Trawl Core Winch, Inspect and Test
  • Decks (Interior), Preserve
  • U/W Body, Diver Inspect
  • Anchors Chains and Ground Tackles, Inspect and Preserve
  • Deck Covering (Insulating), Replace
  • Superstructure, Preserve (Partial)
  • Stack, Preserve (Partial)


Note:


This Notice does not constitute a Request for Quote (RFQ) or a Request for Proposal (RFP). This announcement is for information and planning purposes only and is not a commitment by the Government, implied or otherwise, to issue a solicitation or award a contract. The purpose of this Sources Sought Notice is to determine interest and capability of potential businesses.


Other:


The Government will not pay for any effort expended or any material provided in response to this announcement, or any follow up information requests, nor will the Government return any data provided. Future information will be posted at the website at SAM.gov.


NAICS Code for this requirement: 336611 – Ship Building and Repairing; Size Standard: 1,300 Employees.

More opportunities from Department Of Homeland Security → Sflc Procurement Branch 2(00085)

Same awarding agency

NAICS: 811210
Federal
TRS-3D /AN/SPS-75 Radar repairs/ overhaul services
Solicitation # 70Z08526RRJ001B00
The United States Coast Guard Surface Forces Logistics Center is soliciting repair and overhaul services for the AN/SPS-75 Air Search Radar System, specifically for the 418-foot Legend-class National Security Cutter fleet. This is a sole-source acquisition awarded to Northern Defense Industries, LLC, as they are the only authorized U.S. service provider for these proprietary OEM parts and technical data. The scope of work includes the disassembly, inspection, testing, repair, preservation, packaging, and marking of various critical components, such as power supplies, circuit card assemblies, and radar set subassemblies. All repairs must adhere to Original Equipment Manufacturer specifications to maintain operational readiness and system warranties. The contract is structured as a requirements contract with fixed-price delivery orders, consisting of a base period and three one-year ordering periods, with an additional six-month extension option. Performance is primarily conducted at the contractor's facilities, with a strict requirement for items to be preserved for at least two years of warehouse storage and packaged according to military standards. Award is based on technical capability and fair and reasonable pricing, with evaluations focusing on resources, quality assurance, and past performance. Administrative requirements include electronic invoicing via the Invoice Processing Platform and the provision of a dedicated Project Manager to serve as the primary point of contact.
Electronic and Precision Equipment Repair and Maintenance

POSTED

2 months ago

DEADLINE

in about 1 month
View Details
NAICS: 333995
Federal
APPLETON CYLINDER
Solicitation # 70Z08526Q40200B00
Solicitation 70Z08526Q40200B00 is a combined synopsis and request for quote issued by the U.S. Coast Guard Surface Forces Logistics Center for the procurement of specific brand name components from Appleton Marine Inc. This is a Brand Name Only solicitation with no substitutions authorized; therefore, interested vendors must be authorized distributors and provide an authorized distributor letter from the Original Equipment Manufacturer with their quotation. The requirement is a total small business set-aside under NAICS code 333995 and will result in a firm-fixed-price purchase order. The procurement consists of three line items: three Jib Cylinders (NSN 3040 01-F12-2745), four Luff Cylinders (NSN 3040 01-F12-2743), and ten Sheaves (NSN 3020 01-F12-2750). Strict packaging and marking standards apply, including MIL-STD-2073-1E Method 10 for cylinders and ASTM D5118 fiberboard boxes for sheaves, with all items requiring marking per MIL-STD-129R and barcoding per ISO/IEC-16388-2007. Delivery is required by September 30, 2026, to the USCG Surface Forces Logistics Center in Baltimore, Maryland, with shipping terms set as FOB Destination. Offers will be evaluated based on price and the ability to meet the brand name and authorized distributor requirements. Successful contractors must submit invoices through the Invoice Processing Platform with payment terms of Net 30. All submissions must include the vendor's Unique Entity Identifier and CAGE code, and offerors must maintain current representations and certifications in the System for Award Management.
Fluid Power Cylinder and Actuator Manufacturing

POSTED

3 months ago

DEADLINE

in 9 months
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS