This Subcontract opportunity from Massachusetts was posted on May 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Domestic Fire Protection Equipment and Material Supply

Closed

State & Local

Submission Closed05/28/2026, 02:00:00 PM EDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # 2026-31

The Washington County Board of Commissioners in Georgia is soliciting bids for a complete, code-compliant bulk fuel storage and dispensing system for an on-site facility. The project requires the supply and delivery of two 10,000-gallon UL-2085 fire-rated, double-wall aboveground storage tanks, one for gasoline and one for ultra-low-sulfur diesel. The scope of work includes all necessary piping, fittings, valves, emergency shutoffs, and a keyed fuel control and tracking system featuring software and reporting capabilities. All equipment must be new, include manufacturer certifications, and comply with NFPA 30/30A, EPA 40 CFR Part 112 (SPCC), and local fire codes, with meters being NTEP certified for commercial use. Bids must be submitted in writing by December 14, 2026, and will be evaluated primarily on total evaluated price, with high importance placed on delivery lead time and medium importance on warranty, service, and vendor experience. Contractors must provide a minimum 60-day quote validity period and evidence of three recent comparable installations. Required documentation includes an E-Verify Affidavit, a SAVE Affidavit, and a Certificate of Insurance listing the Washington County BOC as an additional insured, with minimum liability limits of $1,000,000 per occurrence. The contract allows the County to terminate the agreement with 10 days' written notice and requires the contractor to repair or replace defective workmanship for one year following final completion.

Washington County Board of Commissioners

POSTED

DEADLINE

Storage Tank AND SUPPLIES - FORT BRAGG

Solicitation # W911S227U0178

Solicitation W911S227U0178 is a Request for Quotation for the procurement of new commercial equipment and supplies to support Fort Bragg. This acquisition is a Total Small Business Set-Aside and requires the delivery of a 6000 gallon Norwesco white vertical storage tank, along with associated hardware including a Hayward bulkhead tank fitting, Kuriyama acid/chemical and DEF UHMWPE tubing, AMT pumps, and various stainless steel pipe nipples and fittings. The government will award the contract to the responsible offeror whose proposal is most advantageous based on price and technical evaluations. Only new equipment is acceptable, and used or remanufactured products will be rejected. Offers must be submitted exclusively through the PIEE Solicitation module and must include technical and price proposals, as well as a completed certification of the country of origin. While the solicitation is brand name or equal, any proposed equal products must meet all specified salient physical, functional, or performance characteristics and be supported by descriptive literature. Delivery is required on an F.O.B. destination basis, with a preferred delivery timeline of within 30 days. Compliance with various federal regulations is mandatory, including Buy American standards, sustainable product requirements, and specific cybersecurity and telecommunications prohibitions.

POSTED

DEADLINE

Eos Veto Water Tank (6250 gallons)

Solicitation # BZ-2027-01

Lawrence Berkeley National Laboratory is conducting market research via a Request for Information to identify capable sources for the fabrication and delivery of an external veto water tank for the Eos neutrino detector. The tank must have a capacity of 6,250 gallons and be installed on a level surface within a wet pan with no more than 2 inches of overhead clearance. Technical specifications include a water temperature scale rated from -40 to +85 degrees Celsius, a Class B maximum impact hazard rating, and the use of Alum 6061-T6 for yoke construction. This activity is for informational and planning purposes only and does not constitute a formal solicitation or a request for quotes. All future procurement awards will be subject to FAR Clause 52.225-1, requiring the delivery of domestic end products under the Buy American Act. Interested parties are encouraged to provide input on materials and fabrication methods, though they are cautioned not to include proprietary information as responses may be disclosed publicly. The primary point of contact for this effort is Brian Zatkow.

Berkeley National Labor - DOE Contractor

POSTED

DEADLINE

147117 - 147117 PANEL, WRAP TANK

Solicitation # 232982

The City of Los Angeles has issued solicitation number 232982 for the procurement of wrap tank panels. This local government opportunity is managed by the City of Los Angeles, with Eric Lau serving as the primary point of contact for inquiries regarding the content and requirements of the bid. The project is based in Los Angeles, California, within the 90012 zip code area. Interested vendors must submit their responses by the deadline of November 19, 2026, at 5:00 PM. Participation may require formal registration on the City of Los Angeles official website to ensure eligibility and compliance with submission guidelines.

POSTED

DEADLINE

Metallic Hose Assembly ProductionThis subcontract involves the production and supply of 136 metallic hose assemblies for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The assemblies must be fabricated to meet the technical specifications for NSN 4720-01-096741-6, using either standard fabrication methods or approved Additive Manufacturing processes. All deliverables must strictly adhere to DLA Packaging Requirements RP001. The project falls under NAICS code 332420 and is managed by the Department of Defense. Performance for this contract will take place at Robins Air Force Base. Interested parties should note the response deadline of November 19, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Metal Tube Assembly Manufacturing/SupplyThis subcontract involves the manufacturing and supply of metal tube assemblies for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The contractor is responsible for producing or sourcing tube assemblies that match NSN 4710-01-608-7819, with all work falling under NAICS code 332420. The scope of work requires the delivery of 47 palletized units via First Destination Transportation. All items must be packaged and palletized in strict adherence to RP001 DLA Packaging standards. Performance for this contract is centered in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7L3-27-T-1959

This solicitation, issued by the DLA Weapons Support Land Supplier Operations Vehicle Support, is for the procurement of 23 pressure tanks under NSN 2530-00-741-1078. The requirement is designated as a small business set-aside and is defined by specific Army drawings and quality assurance provisions. A critical component of the contract is the First Article Test (FAT) requirement, which necessitates the testing of two units and the submission of a test report within 90 calendar days of the contract award. The primary delivery for the tanks is required within 273 days, with a need ship date of May 4, 2027, and a final required delivery date of March 13, 2028. The contract mandates strict adherence to quality and technical standards, including SAE AS9003 or ISO 9001 compliance and sampling methods per MIL-STD-1916 or ASQ H1331. Inspection and acceptance are conducted at the origin. Packaging must comply with MIL-STD-129 and RP001, with specific requirements for hazardous materials per FED-STD-313 and TQ requirement IP025. Additionally, the contractor must comply with specialty metal requirements under DFARS 252.225-7008 and is prohibited from using Class I ozone-depleting chemicals. Payment and invoicing shall be processed electronically through the Wide Area WorkFlow (WAWF) system.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Fuel Storage Tank & Dispenser SupplyThis subcontract for Fuel Storage Tank and Dispenser Supply involves providing above-ground storage tanks and fueling hardware for prime contractors working on Maryland Department of Natural Resources facility projects. The scope of work includes the delivery of one 1,000 gallon diesel tank, one 2,500 gallon gasoline tank, side-mount dispensers, pumps, and magnetic digital automatic tank gauges. All supplied equipment must adhere to NFPA 30, 30A, 78 and API 650/620 standards, and the tanks must be delivered with a 30-year manufacturer warranty. The opportunity is categorized under NAICS code 332420 and was posted on November 5, 2026, with a response deadline of December 15, 2026. Interested parties can find further details through the Maryland eMMA portal.

POSTED

DEADLINE

Solicitation # N0010426QFF50

Solicitation N00104-26-Q-FF50 is a request for quotation issued by NAVSUP Weapon Systems Support Mechanicsburg for the procurement of compressed gas cylinders (NSN 8120-00-148-1042). The material is designated as Level I Special Emphasis material due to its use in crucial shipboard systems where failure could result in serious injury or loss of life. The cylinders must be manufactured in accordance with MIL-DTL-22606, featuring specific inlet and drain plugs and a strict mercury-free requirement. Delivery is required within 365 days of the contract effective date, with the destination being the Portsmouth Naval Shipyard in Kittery, Maine. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Eligible offerors must provide a Quality Assurance Manual meeting ISO 9001:2000, MIL-I-45208, or MIL-Q-9858 standards. Technical requirements include rigorous testing and certification for weldments, hydrostatic pressure, and gas leakage, with all certification data submitted via Wide Area Workflow (WAWF) for review and acceptance prior to shipment. The solicitation was amended to extend the response deadline to November 20, 2026, and to dissolve the small business set-aside, making the competition unrestricted.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # SPE7L4-27-T-0779

Solicitation SPE7L4-27-T-0779, issued by the DLA Weapons Support LSO Combat Vehicles and Armament, is for the procurement of 22 pressure tanks (NSN 2530013321393), specifically part number A12-11924-000 from Daimler Truck North America LLC. The contract requires delivery within 161 days after order, with a required delivery date of April 27, 2027. Shipping is designated as FOB Destination, with the delivery location at the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The procurement is conducted under the First Destination Transportation program to optimize shipping costs. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and RP001. Hazardous materials must be packaged per FED-STD-313 and TQ requirement IP025, while non-hazardous items follow ASTM D3951. A critical environmental restriction prohibits the use of Class I ozone-depleting chemicals. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on certain telecommunications equipment. Quotations were due by November 16, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Fuel Tanks for Elkader & Missouri Valley Maintenance Garages

Solicitation # 645-DOTRFB-3184-2027

The Iowa Department of Transportation is soliciting competitive bids under solicitation number 645-DOTRFB-3184-2027 for the purchase of two new fuel tanks to be delivered F.O.B. Destination to the Elkader and Missouri Valley maintenance garages. The agency will purchase one tank for each site, selecting either a 3,000 or 4,000 gallon capacity at its own discretion. All tanks must be new and not pre-owned, and the estimated concrete pad size for both delivery locations is 20 by 20 feet. Bidders are required to upload specific tank specifications as part of the submittals prerequisite and must adhere to formatting guidelines using size 12 Times New Roman or another serif font. The contract will be awarded by line item, and these items are not tied. The Iowa DOT intends to award the contract to the responsible bidder deemed most advantageous based on cost and other factors, including proposed staffing, the ability to meet the required time schedule, work capacity, and a comprehensive review of past performance. The bidding process is governed by Iowa Administrative Code 761-20. The deadline for responses is November 24, 2026, at 1:00 PM CST, with submissions handled through the IMPACS Business Opportunities site. The Iowa DOT is a tax-exempt agency and will provide certificates upon request.

POSTED

DEADLINE

Compressed Gas Cylinder ManufacturerThis subcontract opportunity with the Department of Defense involves the fabrication of high-pressure compressed gas cylinders for prime contractors supporting NAVSUP Weapon Systems Support projects. The manufacturer is required to produce cylinders in accordance with MIL-DTL-22606 using specific materials, including ASTM-A336, ASTM-A335, and ASTM-A322. Due to the nature of these Critical Safety Items, the contractor must perform specialized welding and heat treating processes. Qualified bidders must hold ISO 9001 or MIL-I-45208 certification and provide mercury-free certification. The scope of work concludes with the delivery of finished compressed gas cylinders. Interested parties should note the response deadline of November 20, 2026, for this requirement categorized under NAICS code 332420.

Navsup Weapon Systems Support Mech

POSTED

13 days ago

DEADLINE

in 6 days

AI Contract Overview

The contract, titled Domestic Fire Protection Equipment and Material Supply, requires the provision of U.S.-manufactured fire alarm and sprinkler system components including control panels, detectors, piping, and conduit, all of which must comply with Buy America regulations to ensure full domestic content. This subcontract is issued under NAICS code 332420 and is intended for the Massachusetts Bay Transportation Authority, with performance tied to infrastructure projects under its jurisdiction in Massachusetts. All supplied items must be sourced and fabricated entirely within the United States to meet federal procurement standards, and the solicitation was posted with a response deadline matching the posting date, indicating an immediate or expedited procurement timeline. The contract does not specify geographic delivery details beyond the state level, and the designated point of contact information is not provided in the data. Access to the full solicitation is available through the provided UI link for potential bidders to review requirements and submit proposals.

General Info

Supply of U.S.-made fire alarm and sprinkler components for MBTA, ensuring Buy America compliance.

Agency

Massachusetts → MBTA

NAICS

332420 - Metal Tank (Heavy Gauge) Manufacturing

Place of Performance

MA, USA

Set-Aside

NONE

Documents

This scope was carved out of Z99CN03.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Call 003 Z99CN03

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedMay 28

subcontract

Response DeadlineMay 28

Deadline has passed

Submission Closed

05/28/2026, 02:00:00 PM EDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyMassachusetts → MBTA

ContactsNo contacts available

OfficeN/A

Organization / Agency

Massachusetts → MBTA

Office AddressN/A

ContactsNo contact information available

Full Description

Supply of U.S.-manufactured fire alarm and sprinkler components including control panels, detectors, piping, and conduit to meet Buy America requirements.