Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

DRAIN, FLOOR

Active
SPE8E8-26-T-5043Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of three floor drains identified by NSN 4510-01-519-7819, with a delivery requirement of 167 days after award. The solicitation number is SPE8E8-26-T-5043, issued on August 5, 2026, with responses due by August 17, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and the applicable revision depends on whether the acquisition is simplified or large, with the version in effect on the solicitation or award date controlling unless an amendment supersedes it. Government identification must be removed from any non-accepted supplies prior to return. The contracting activity is the DDSP New Cumberland Facility under the Department of Defense, with performance located at New Cumberland, Pennsylvania, zip 17070-5002. The NAICS code is 332913, and the primary point of contact is Alexis Selby, reachable at 312-444-8487 or alexis.selby@dla.mil. The solicitation is publicly accessible through the DIBBS portal.

General Info

Procure three floor drains, NSN 4510-01-519-7819, deliver in 167 days, DLA New Cumberland, responses due August 17, 2026.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

332913 - Plumbing Fixture Fitting and Trim ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E8-26-T-5043 Request for Quotations Aug 06 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Alexis Selby
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DRAIN,FLOOR
DRAIN, FLOOR
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ADEQUATE DATA FOR NSN/Part Number: 4510-01-519-7819 Quantity: 3 EA Purchase Request: 7017757939QTY: 3 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332913
New
DIBBS
URINAL, STATIONARY
Solicitation # SPE8E9-26-T-3310
The contract is for 78 stationary urinals with part numbers 5672 and U5672, manufactured by Anchor Fabricators Inc. in Clayton, OH, and is identified by NSN 4510-00-691-3979. The items must be color white and comply with all applicable technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, which are incorporated by full text. Packaging must meet DLA packaging specifications, and any non-accepted supplies must have government identification removed before return. The solicitation number is SPE8E9-26-T-3310, issued under a Women-Owned Small Business Set-Aside, with a NAICS code of 332913. The request was made under purchase request 7017757728, and delivery is required within 187 days after order. The place of performance is Tinker Air Force Base, Oklahoma, with a response deadline of August 17, 2026, and the solicitation was posted on August 5, 2026. Primary point of contact is Matthew Kruc of the Department of Defense, Construction & Equipment MRO SVC I.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
FAUCET, SINGLE
Solicitation # SPE8E9-26-T-3328
The contract is for the procurement of seven single faucets under the NSN 4510-01-187-2555, with the model designated as DRINKAMATIC by MILE HIGH EQUIPMENT CO of Denver, CO. Delivery is required within 167 days after award, and the solicitation number is SPE8E9-26-T-3328, with a response deadline of August 17, 2026. The procurement falls under NAICS code 332913 and is managed by the Department of Defense’s Construction & Equipment MRO Service I. All supplies must comply with DLA packaging requirements and incorporate technical and quality specifications listed in the DLA Master List of Technical and Quality Requirements, where revisions in effect on the solicitation issue or award date govern depending on acquisition size. Mercury or mercury-containing compounds are strictly prohibited in the product or its direct contact surfaces, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents. Portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier, as mandated by NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies, and the place of performance is Tracy, CA, with Matthew Kruc listed as the primary point of contact.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
STRAINER, WASTE DRAIN
Solicitation # SPE8E8-26-T-4976
The contract pertains to the procurement of 90 units of a strainer, waste drain identified by NSN 4510-01-313-9460, with a delivery requirement of 167 days after order. The solicitation number is SPE8E8-26-T-4976, issued by the DLA San Joaquin under the Department of Defense, and responses are due by August 17, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment introduces a later revision. All supplies must comply with DLA packaging requirements and regulatory standards as defined in RP001 and RA001, and any non-accepted items must have government identification removed prior to return. The place of performance is Tracy, California, with Alexis Selby listed as the primary point of contact for inquiries. The NAICS code 332913 indicates the classification under Other Fabricated Metal Product Manufacturing, and the solicitation is open to federal contractors with no specified set-aside classification.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
VALVE, FLUSH
Solicitation # SPE8E8-26-T-5022
This contract specifies the procurement of 75 units of a DOLPHIN MODEL TYPE I, CLASS A, SHOCK-PROOF FLUSHOMETER for shipboard use in salt water and severe water conditions, identified by NSN 4510-01-576-0096. The item must comply with stringent environmental and safety standards, including the prohibition of intentional addition or direct contact with mercury or mercury-containing compounds, except for specific functional uses such as in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA. Portable devices containing mercury must be shock-proof and feature a secondary containment boundary as mandated by NAVSEA 5100-003D. The solicitation is issued under SPE8E8-26-T-5022 as a Total Small Business Set-Aside, with a response deadline of August 17, 2026, and a required delivery within 36 days after award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. The contract is managed by the Department of Defense through the San Diego office, with Alexis Selby listed as the primary point of contact.
SAN DIEGO

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
DRAIN, FLOOR
Solicitation # SPE8E8-26-T-5067
The contract is for a single unit of a Type B deck drain with a steel ring, manufactured from copper nickel alloy, identified by NSN 4510-01-528-3652 and associated with purchase request 7017744439. Delivery is required within 20 days after delivery order issue. The specification references DLA Packaging Requirements for Procurement and incorporates technical and quality standards from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, with compliance governed by the version in effect on the solicitation issue date for simplified acquisitions. All government identification must be removed from non-accepted supplies as per RQ011. The solicitation number is SPE8E8-26-T-5067, issued by the Defense Logistics Agency under the Department of Defense, with a posted date of August 5, 2026, and a response deadline of August 17, 2026. The NAICS code is 332913, and performance is to occur at FPO with ZIP 96666. Primary point of contact is Alexis Selby, reachable via email and phone provided.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
STEM, FAUCET
Solicitation # SPE8E8-26-T-5026
This contract, issued by the Defense Logistics Agency under solicitation number SPE8E8-26-T-5026, specifies the procurement of 24 units of a STEM FAUCET with NSN 4510-01-477-9325 at a unit price of $24.00, for a total contract value of $576.00. Delivery is required FOB origin within 167 days of contract award, with the original delivery deadline set for November 29, 2026, and a need ship date of February 1, 2027. The item must be packaged in accordance with MIL-STD-2073-1E, marked per MIL-STD-129 with no special marking requirements, and shipped to the designated receiving warehouse at Tracy, California. Inspection and acceptance occur at the destination. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware, with specific exemptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and NAVSEA-specified reagents. Mercury-containing portable lamps and instruments must include a second boundary of containment as defined by NAVSEA 5100-003D. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation or award date depending on acquisition size. The unit of issue is EA and all transportation logistics must comply with DLA procedural notes C19 and C20.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
GARBAGE DISPOSAL MA
Solicitation # SPE8E8-26-T-5066
This contract pertains to the procurement of three units of garbage disposal equipment under NSN 4540-01-685-9857, identified by part number FD4/125-E-6(480/60/3) and purchase request 7017757109. The delivery is scheduled to occur within 167 days from the contract award, with FOB origin terms applying and no tolerance for quantity variance. Inspection and acceptance both occur at the destination, and packaging must strictly conform to MIL-STD-2073-1E, including specific preservation methods, wrapping, and unit container requirements. Marking must adhere to MIL-STD-129 with no special marking code applied. Palletization follows DLA Packaging Requirements, and all shipments must be addressed to the DDSP New Cumberland Facility in New Cumberland, Pennsylvania. The required ship date is February 1, 2027, with the original delivery deadline set for March 20, 2027. The solicitation, issued under contract number SPE8E8-26-T-5066, was posted on August 5, 2026, with a response deadline of August 17, 2026. It falls under NAICS code 332913 and is managed by the Department of Defense through the DDSP New Cumberland Facility. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date. The contract incorporates protections for covered defense information and directs adherence to DLA transport guidelines. The unit of issue is each, with a unit price of $3.00, resulting in a total contract value of $9.00. Primary point of contact is Alexis Selby, reachable via email and phone provided, and further details are available through the DIBBS portal.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
BAFFLE, DECK DRAIN
Solicitation # SPE8E8-26-T-4992
The item specified is a BAFFLE, DECK DRAIN with NSN 4510-01-369-5880, for a quantity of 18 units, under Purchase Request 7017757481, with delivery required in 167 days after award. The solicitation number is SPE8E8-26-T-4992, posted on August 5, 2026, with responses due by August 17, 2026. Performance is directed to Tracy, California, 95304-5000, under the jurisdiction of DLA Dist San Joaquin, a Department of Defense entity. The NAICS code 332913 identifies the industrial category, and the acquisition is classified as federal. The contract incorporates DLA packaging requirements and references the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by solicitation or award date, depending on acquisition size. Cybersecurity requirements mandate CMMC Level 2 certification by a C3PAO and compliance with Covered Defense Information standards. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons, even within the U.S., and requires prior authorization from the Department of State or Commerce. Access to controlled data is limited to contractors with approved JCP certification, completion of mandatory DOD export control training, and formal DLA approval. Point of contact for inquiries is Alexis Selby, reachable via email and phone provided.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
VALVE, FLUSH
Solicitation # SPE8E8-26-T-5013
The contract is for the procurement of 64 units of a FLUSH VALVE identified by NSN 4510-01-579-3370 under Purchase Request 7017757363, with a delivery requirement of 89 days ADO. The solicitation number is SPE8E8-26-T-5013, issued on August 5, 2026, with responses due by August 17, 2026, and is designated as a Women-Owned Small Business Set-Aside under NAICS code 332913. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The contract mandates compliance with DLA packaging requirements and includes provisions for the removal of government identification from non-accepted supplies. The performing location is in San Diego, California, with the Department of Defense as the overseeing agency and Alexis Selby as the primary point of contact, reachable via email and phone, with all communications and submissions to be conducted through the DIBBS portal.
SAN DIEGO

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
Federal
HOUSING CONTROL
Solicitation # SPRMM126QKG90
This contract pertains to the procurement of a HOUSING CONTROL item under solicitation SPRMM126QKG90, issued by DLA Mechanicsburg on behalf of the Department of Defense. The requirement mandates manufacturing in strict compliance with MIL-STD-1686 and MIL-STD-130 Revision N for marking, with no substitutions allowed without prior written approval from the NAVICP-MECH Contracting Officer. Changes to design, material, or part number must be classified under one of six specific codes and accompanied by detailed documentation. The item must be mercury-free, with any exception requiring explicit contractual authorization and protective labeling, and adherence to ANSI/ESD S20.20 for electrostatic discharge control is mandatory. Refurbished materials are explicitly prohibited, and only original equipment manufacturers or authorized distributors may respond, with proof of authorization required. All deliveries are subject to inspection at source, with final acceptance occurring at the designated facility, and contractors must comply with strict quality assurance protocols including maintaining inspection records for 365 days after final delivery. Packaging must conform to MIL-STD-2073, and all submissions require electronic transmittal via PIEE-WAWF. The contract is awarded using the Lowest Price Technically Acceptable (LPTA) methodology, with offers valid for a limited period and responses due by August 7, 2026. Proposals must include the OEM’s CAGE code and part number if the offeror is not the manufacturer, and all communications must be directed to the designated point of contact. Contractors must register for Electronic Data Access on the PIEE portal to monitor order status and comply with cybersecurity requirements mandating CMMC Level 1 self-assessment. The use of restricted technical data is governed by specific distribution statements, and access to “NOFORN” or “Official Use Only” documents requires formal certification. Any changes to the production facility must not impact small business commitments, delivery timelines, or F.O.B. points, and require a $250 administrative fee. Compliance with all applicable clauses—including payment via WAWF, traceability of parts, and prohibitions on mercury contamination—is mandatory and non-negotiable, with noncompliance leading to rejection of delivery or contract cancellation.
SPRMM1 DLA Mechanicsburg

POSTED

about 8 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332913
New
DIBBS
Military Shipment Marking & Barcoding Services
DLA DIST SAN JOAQUIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
Floor Drain Supply – Industrial GradeThe contract involves the supply of one industrial floor drain with the national stock number 4510015197819, engineered to exacting military standards for durability and corrosion resistance. The component must be manufactured with precision and treated with a protective coating capable of withstanding harsh operational environments, ensuring long-term performance under demanding conditions typical of defense applications. The work is classified under NAICS code 332913, indicating specialized fabrication and manufacturing practices are required to meet the technical specifications. This is a subcontract opportunity issued by the Defense Logistics Agency under the Department of Defense, with a response deadline of August 17, 2026. The place of performance is designated as Virginia Beach, Virginia, with a zip code of 23459-9309, indicating the delivered product must be shipped to or installed at this location. The solicitation is open to qualified subcontractors and is accessible via the DIBBS system, though no specific set-aside status or point of contact is provided in the data. All proposals must demonstrate compliance with military-grade requirements for material integrity, coating adherence, and dimensional accuracy.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 332216
New
DIBBS
HEATING UNIT, INFRAR
Solicitation # SPE8E5-26-T-3844
The contract is for the procurement of four heating units, infrared type, under NSN 3439-01-436-9799, with a delivery requirement of 167 days after date of award. The solicitation number is SPE8E5-26-T-3844, issued on August 5, 2026, with responses due by August 17, 2026, and is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside provision. The procurement is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance specified at New Cumberland, Pennsylvania, zip code 17070-5002. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA packaging standards, and government identification must be removed from any non-accepted items. Only products explicitly named and identified by part number in the purchase order are considered acceptable, with no alternative substitutes permitted. The item has no shelf life limitation. Primary point of contact is Ira Hedgepeth, reachable via email and phone provided in the contract data.
Saw Blade and Handtool Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FILTER, AIR, ELECTROS
Solicitation # SPE8E8-26-T-5042
The contract is for the procurement of 29 units of AIR FILTER, ELECTROS with NSN 4460-01-692-2652 under solicitation SPE8E8-26-T-5042, issued as a total small business set-aside under NAICS code 333413. Delivery is required within 167 days of award, with shipments to be furnished FOB origin and inspected and accepted at destination, with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation, wrapping, and marking requirements, with no special marking codes applied, and palletization must follow DLA packaging standards. The supplies are to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and the original delivery deadline was October 28, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date or award date controls depending on acquisition size. The contract incorporates provisions for potential coverage of covered defense information and requires adherence to DLA transportation and freight procedures. The point of contact for this procurement is Alexis Selby of the Department of Defense.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
GAGE, PROFILE
Solicitation # SPE8E5-26-T-3780
The contract pertains to the procurement of 12 GAGE, PROFILE units under solicitation SPE8E5-26-T-3780, with a response deadline of August 17, 2026, and a delivery requirement within 167 days after order. The item is identified by NSN 5220-00-446-8307 and is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Item Unique Identification (IUID) compliance is mandatory in accordance with MIL-STD-130 and the DFARS 252.211-7003 clause. The contractor must be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified through a qualified third-party assessment organization. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires prior government authorization. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of DOD export control training, and approval from the DLA controlling authority. The contracting office is the DLA New Cumberland Facility, with primary point of contact Khue Nguyen, and the place of performance is listed as New Cumberland, PA, 17070-5002. There is no shelf life requirement for this item.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 323117
New
DIBBS
MARKER, IDENTIFICATION
Solicitation # SPE8E6-26-T-4066
This contract pertains to the procurement of a Marker, Identification with NSN 7690-01-290-0175 and part number TKG0896-1, supplied by FRUEHAUF CORP, and is governed by stringent DLA packaging and quality requirements. The item is classified as a critical application item with a non-extendable Type I shelf life of 24 months, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, including the special marking code 32 for shelf-life identification. Packaging and palletization must adhere to DLA’s official procurement standards, and the item must be delivered FOB origin with no quantity variance allowed. Delivery is required within 36 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The unit of issue is PG, with a total quantity of 21 units, and the contract references technical and quality requirements from the DLA Master List, applicable as of the solicitation issue date. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the contract is issued under solicitation SPE8E6-26-T-4066 with a response deadline of August 17, 2026, and an original required delivery date of August 5, 2026.
Books Printing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
IMPELLER, FAN, AXIAL
Solicitation # SPE8E7-26-T-3511
The item sought is an axial fan impeller, identified by NSN 4140-01-561-8011, with a quantity of 21 units, required as a component of an Uninterruptible Power Supply within the Vestdavit RIB Davit System on LCS-1 vessels. Though the UPS is manufactured by GE INV, procurement must use Vestdavit’s part number 12271 through their government distributor, Scan Pacific Northwest LLC, with CAGE code 3ESE0. The solicitation, issued under contract number SPE8E7-26-T-3511, is governed by DLA packaging and technical quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. All supplies must comply with the requirement to remove government identification from non-accepted items. Delivery is due in 167 days after award, and the place of performance is New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. The NAICS code 333414 applies, and the contracting office is the DLA New Cumberland Facility under the Department of Defense, with Kelly Mitchell listed as the primary point of contact.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 321114
New
DIBBS
CORROSION PREVENTIVE C
Solicitation # SPE8ES-26-T-2509
This contract solicits a corrosion preventive compound identified by NSN 8030-01-722-1433 and part number ETCPRTU-2B3C from Chemeon Surface Technology, LLC, with a quantity of 5 containers delivered FOB destination under solicitation SPE8ES-26-T-2509. The item is classified as a Type 2 (Code 6) shelf life item with a 24-month extendable shelf life, subject to specific packaging and marking requirements outlined in MIL-STD-2073-1E and MIL-STD-129, including the Special Marking Code 33 for Type II shelf life. Packaging must comply with DLA procurement standards and the Hazardous Materials Packaging, Marking, and Shipping requirements, with all hazardous material documentation—including Safety Data Sheets and labeled containers—aligned with OSHA’s revised Hazard Communication Standard (29 C.F.R. 1910.1200) effective June 1, 2015. Suppliers must submit SDS and compliant labels for approval prior to award and ensure employee training on the new standards. The item must be delivered within 173 days of contract award, with a required delivery date of October 15, 2026, and a need ship date of February 1, 2027. Delivery is to the DLA Distribution facility at New Cumberland, Pennsylvania, with a strict zero variance in quantity and inspection and acceptance occurring at the destination. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and the applicable revision depends on the solicitation or award date. All units of issue follow DoD authorized standards as aligned with ANSI X12.
Wood Preservation

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
CASE, STORAGE AND TR
Solicitation # SPE8E6-26-T-4056
The contract pertains to the procurement of 35 units of a specific item identified by NSN 4240-01-654-9843 and part number 940210, with a unit price of $35.00, totaling $1,225.00. Delivery is required within 15 days of the contract award, FOB origin, with no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit containerization per DLA’s requirements. Marking must adhere to MIL-STD-129 with no special marking codes applied, and palletization must follow DLA’s packaging standards. The product must be shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLA procedural notes C19 and C20. The item is subject to Defense Logistics Agency packaging requirements and technical standards referenced in the DLA Master List of Technical and Quality Requirements. The contract incorporates cybersecurity requirements mandating a CMMC Level 2 self-assessment and applies to covered defense information. The solicitation number SPE8E6-26-T-4056 was issued with a response deadline of August 17, 2026, and an original delivery target of September 19, 2026. The need ship date is set for August 5, 2026, indicating the timing for readiness. Performance occurs at the DLA New Cumberland facility, and all technical and quality standards referenced are controlled by the DLA Master List revision in effect on the RFP issue date. Inspection and acceptance occur at the destination point, and the contractor must be prepared to remove any government identification from non-accepted supplies. The ordering activity is the Department of Defense, with primary point of contact John Lieb at DLA, and the North American Industry Classification System code is 339113.
Surgical Appliance and Supplies Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-26-T-2502
The contract specifies the procurement of 3 cases of 50-milliliter adhesive units, part number DP-460 from 3M Company, identified by NSN 8040-01-642-2514, with each case containing twelve units. The product is amber and off-white in color and must comply with a non-extendable 24-month shelf life requirement for a Type I (Code M) item. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with special labeling indicating Type I shelf life, and palletization must follow DLA packaging standards. Delivery is FOB destination, with a required delivery date of January 25, 2027, and a lead time of 173 days, subject to zero variance in quantity. The adhesive is classified as a hazardous material, requiring full compliance with OSHA’s revised Hazard Communication Standard, including submission of Safety Data Sheets (SDS) and approved HCS or CPSA/FHSA-compliant labels prior to award, along with employee training on the new requirements. Storage must be maintained between 60-80°F (15-27°C) to preserve shelf life. Technical and quality requirements are governed by the DLA Master List, and the contract incorporates provisions for handling covered defense information. All deliveries must be sent to the DLA Distribution facility in New Cumberland, Pennsylvania, and shipping logistics must follow DLAD procedural notes C19 and C20.
Adhesive Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336611
New
DIBBS
RAMP ASSY CORNER RH
Solicitation # SPE8E5-26-T-3818
This contract covers the procurement of 16 units of RAMP ASSY CORNER RH, identified by NSN 5440-01-553-0684 and part number 7017757152, under solicitation SPE8E5-26-T-3818. The item must be manufactured and delivered in strict compliance with technical specifications referenced from the DLA Master List of Technical and Quality Requirements, including welding and liquid penetrant nondestructive inspection standards per AWS D1.2. A certificate of conformance is required unless waived by a quality assurance letter of instruction, and all components must adhere to dimensional and assembly directives, particularly the prohibition against welding the strut base P12 to the gusset plate P18 as shown on the drawing; instead, P12 must be packaged separately with an instruction sheet included in each ramp assembly. The product must be packaged per ASTM D3951 and labeled in accordance with MIL-STD-129, with palletization following DLA packaging requirements, and all packaging marked with the specified unit of issue and quantity per unit pack. Mercury and mercury-containing compounds are strictly prohibited unless exceptions apply for batteries, instruments, or weapon systems, and must meet secondary containment and shock-proof standards per NAVSEA 5100-003D. The contract mandates full compliance with federal safety regulations, including the submission of Safety Data Sheets and Hazard Communication Standard labels updated to the Globally Harmonized System, effective June 1, 2015, with supplier employee training required on these changes. Delivery is FOB origin with inspection and acceptance occurring at destination, and must be completed within 167 days of contract award, with a required ship date of February 1, 2027, and original delivery deadline of October 24, 2027. No quantity variance is permitted, and all items must be shipped to the DDSP New Cumberland Facility in Pennsylvania. The solicitation is a total small business set-aside under NAICS code 336611, with drawings available via DIBBS during the open solicitation period. The contract incorporates FAR clauses for inspection, conformance, and standard requirements, and all documentation, including technical data packages and revisions referenced, must align with the specified drawing revisions and dated configurations.
Ship Building and Repairing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
LIGHT, COCKPIT, AIRCRAFT
Solicitation # SPE8E7-26-T-3487
This contract pertains to the procurement of aircraft cockpit lighting components under solicitation SPE8E7-26-T-3487, issued by the Department of Defense through the DDSP New Cumberland Facility. The item, identified by NSN 6220-01-563-8636 and part number 937-000-10M, is supplied by Luminator Holding L.P and Leonardo Spa Helicopters Division, with a total quantity of 13 units at a unit price of $13.00, resulting in a total contract value of $169.00. Delivery is required within 153 days from the contract date, with FOB origin terms, and inspection and acceptance occur at the destination. Packaging must comply with DLA Master List of Technical and Quality Requirements, particularly RP001 for packaging standards, MIL-STD-129 for marking and labeling, and either TQ requirement IP025 for hazardous materials per FED-STD-313 or ASTM D3951 for non-hazardous commercial packaging, with the DLA standards overriding ASTM where applicable. All packaging must reflect the specified Unit of Issue and Quantity per Unit Pack, and palletization must adhere strictly to DLA guidelines. The contract is a total small business set-aside under NAICS code 333515, with a response deadline of August 17, 2026, and was posted on August 5, 2026. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, with a required ship date of January 18, 2027, and an original delivery deadline of February 27, 2027. No quantity variance is permitted. Transportation instructions are governed by DLAD Proc Note C19 for general shipment and C20 for first destination handling. Documentation for source approval and handling of covered defense information is required as stipulated by RC001 and RD003. All technical and quality requirements referenced via R or I numbers in the DLA Master List take precedence over any other standards. The primary point of contact for the contract is Kelly Mitchell, reachable via email and phone provided.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
SHEETING, REFLECTIVE
Solicitation # SPE8E5-26-T-3781
Reflective sheeting meeting specification 3M ScotchLite 3271, 24 inches nominal width by 50 yards nominal length, is procured under contract SPE8E5-26-T-3781 with NSN 9390-00-501-5145 and part number 7000030797. The contract requires 14 rolls, each defined as one RO equal to 50 yards, with no variance allowed in quantity. Delivery is FOB origin and must be completed within 167 days of award, with the original required delivery date set for June 11, 2027, and a need ship date of February 1, 2027. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R- and I-numbers, which supersede industry standards such as ASTM D3951. Packaging must comply with DLA Packaging Requirements RP001 and MIL-STD-129 for marking and labeling, with hazardous material handled per Fed-Std-313 and TQ requirement IP025 if applicable, otherwise commercially packaged in accordance with ASTM D3951. Palletization must align with RP001, and all packaging must be labeled consistent with the specified Unit of Issue and Quantity per Unit Pack. Inspection and acceptance occur at destination. The delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation protocols are governed by DLAD Proc Notes C19 and C20. The solicitation was issued on August 5, 2026, with a response deadline of August 17, 2026, under the NAICS code 327999, and is managed by the Department of Defense through the DDSP New Cumberland Facility.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325510
New
DIBBS
SPECTRAL SELECTIVE COA
Solicitation # SPE8ES-26-T-2504
The contract calls for the delivery of Spectral Selective Coating in polyurethane form, specifically identified by NSN 8010-01-681-7475, with a total quantity of 16 boxes, each containing eight one-pint units. The coating must be dark gray, matching color chip number 36170, and packaged in accordance with DLA packaging requirements. Each unit package must include a MIL-STD-129 label featuring the lot or batch number. The product is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. Hazardous material provisions require submission of Safety Data Sheets compliant with 29 C.F.R. 1910.1200, as mandated by OSHA’s revised Hazard Communication Standard effective June 1, 2015, along with corresponding labels aligned with either the HCS or the Consumer Product Safety Act and Federal Hazardous Substance Act. Suppliers must also certify that employees have been trained on the new SDS formats, labeling standards, and regulatory requirements. Physical identification of the bare item must comply with RQ017, and all government identification must be removed from non-accepted supplies per RQ011. Delivery is due within 34 days after contract award, with the solicitation issued on August 5, 2026, and responses due by August 11, 2026. The contract is administered by the Department of Defense through the DDSP New Cumberland Facility, with point of contact Stephen Ockenhouse.
Paint and Coating Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details