Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Drywall, Ceilings, and Interior Finishes

Active

State & Local

Response Deadline08/25/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract encompasses the complete interior finish work for patient rooms and common areas, including framing, drywall installation, taping, texturing, and the supply and installation of acoustical ceiling systems. All work must meet stringent quality and safety standards appropriate for healthcare environments, ensuring durability, sound control, and compliance with medical facility regulations. The scope is focused on delivering a seamless, functional, and aesthetically consistent interior finish across all designated areas to support patient comfort and operational efficiency. Subcontractors are required to submit proposals by the deadline of August 25, 2026, under the NAICS code 238310 for drywall and insulation contractors. The contract is managed by the Mississippi Department of Finance and Administration, with performance expected to take place within state facilities under its jurisdiction. Though specific locations and points of contact are not provided, interested parties must review the official listing through the provided state portal to access full solicitation details, including technical specifications, submission guidelines, and prevailing wage requirements.

General Info

Interior finish work for healthcare spaces including drywall, ceilings, and acoustic systems, due August 25, 2026.

Agency

Mississippi → MS DEPT FINANCE and ADMINISTRATIONView Agency

NAICS

238310 - Drywall and Insulation ContractorsView NAICS

Place of Performance

MS, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 25

Submission deadline

Response Deadline

08/25/2026, 06:00:00 PM UTCin 26 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyMississippi → MS DEPT FINANCE and ADMINISTRATION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Mississippi → MS DEPT FINANCE and ADMINISTRATION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Framing, drywall installation, taping, texturing, and acoustical ceiling systems for patient rooms and common areas.

Similar Contracts

Same NAICS industry code

Drywall and Interior FinishesThe contract calls for the installation of drywall, joint taping, texturing, and surface preparation for painting on interior walls and ceilings across facilities under the jurisdiction of the St. Johns River Water Management District in Florida. The work falls under NAICS code 238310, classifying it as interior finish installation services, and is structured as a subcontract opportunity with a response deadline of August 12, 2026. All interior finishes must meet industry standards for durability, smoothness, and readiness for paint application, ensuring a uniform finish throughout the project area. The place of performance is within Florida, though specific locations are not detailed, and bidders must be prepared to mobilize and complete work at designated sites as directed. The solicitation was posted on July 28, 2026, and interested parties must submit proposals prior to the deadline through the Florida vendor marketplace portal.

St. Johns River Water Management Dist

POSTED

DEADLINE

Tenant Improvement Construction (Interior Build-Out)The contract involves a full interior build-out of leased government space to be completed in Salina, requiring comprehensive construction of walls, ceilings, flooring, lighting, doors, and all necessary accessibility-compliant features in strict accordance with approved design drawings and U.S. Army Corps of Engineers standards. This is a subcontract under NAICS code 238310 for tenant improvement construction, with bids due by August 4, 2026, and the work must meet all federal requirements for functionality, safety, and accessibility. The project is managed by the Department of Defense through its W071 Endist Kansas City office, and performance is limited to the specified location in Salina without additional geographic flexibility.

W071 Endist Kansas City

POSTED

DEADLINE

Architectural Finishes & Interior Build-OutThe contract requires the installation of architectural finishes including drywall, partitions, doors, ceilings, flooring, and millwork within a healthcare facility, with strict adherence to Infection Control Risk Assessment (ICRA) protocols to ensure patient safety and compliance with healthcare environment standards. Work must be carefully coordinated with mechanical, electrical, and plumbing (MEP) systems to avoid disruptions and maintain operational integrity throughout construction. The scope demands precision in material selection and installation methods to meet stringent healthcare regulations and facility-specific operational needs. This is a subcontract under a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside, classified under NAICS code 238310 for building finishing contractors. The opportunity is posted by the Department of Veterans Affairs through the 248-NETWORK Contract Office 8, with performance located in Gainesville, Florida, zip code 32608. Proposals are due by August 28, 2026, at 4:00 a.m. EDT, and the contract is intended to support the VA’s mission of delivering safe, high-quality healthcare infrastructure.

248-NETWORK Contract Office 8 (36C248)

POSTED

DEADLINE

Plumbing Fixture Reconnection & Wall RestorationThe contract encompasses the disconnect and reconnection of plumbing fixtures in restrooms, laboratories, and fountains, requiring precise handling to ensure functional integrity after removal and reinstallation. Following this work, full restoration of all affected areas is mandatory, including repair and replacement of breached drywall, ceiling tiles, paint, and other finishes to precisely match the pre-existing conditions in both appearance and quality. The work must be completed to maintain aesthetic and structural continuity with the original environment, ensuring no visible or material discrepancies remain after the project concludes. This subcontract is issued by Quincy Community Schools in Michigan under NAICS code 238310, which corresponds to plumbing, heating, and air-conditioning contractors. The solicitation was posted on July 28, 2026, with a response deadline of August 24, 2026, and all work is to be performed at the Quincy location. The terms require adherence to high standards of craftsmanship, with no tolerance for mismatched finishes or incomplete restorations, and contractors must be prepared to coordinate closely with facility conditions to achieve seamless integration of new work into existing infrastructure.

Quincy Community Schools

POSTED

DEADLINE

Drywall, Framing, and Ceiling InstallationThe contract involves the installation of metal framing, drywall partitions, acoustical ceiling grids, and all related finishing work including taping, mudding, and sanding for new office spaces at the University of Houston, as detailed in Exhibit A. The scope is strictly limited to interior construction elements required to complete the structural and aesthetic framework of the designated office areas, ensuring compliance with specified architectural and acoustic standards. All work must be performed in accordance with the project’s technical requirements and timeline. This subcontract was posted on July 27, 2026, with a response deadline of August 18, 2026, and falls under the NAICS code 238310 for drywall and insulation contractors. The solicitation is managed through the Texas SmartBuy portal, with the University of Houston acting as the contracting entity under its Texas office. There is no set-aside designation specified, and no point of contact or physical address details are provided beyond the agency affiliation. Bidders must submit proposals prior to the deadline to be considered for award, with performance expected to align with the project’s scope outlined in the referenced exhibit.

University of Houston

POSTED

DEADLINE

Drywall, Framing, and Acoustical Ceilings InstallationThe contract pertains to the installation of metal and wood framing, drywall, taping, finishing, and acoustical ceiling grid and tile systems within renovated spaces at the University of Texas Health Science Center at Tyler. Work scope includes all aspects of interior wall and ceiling systems required for facility renovations, ensuring compliance with building standards for durability, finish quality, and acoustic performance. The subcontract is open for bids with a response deadline of August 25, 2026, and falls under NAICS code 238310, which classifies it as drywall and insulation work. The project is part of a larger renovation initiative managed by the Texas agency under the UT Health Science Center at Tyler, though specific location details and point of contact information are not provided in the contract data. Bidders must be prepared to deliver comprehensive interior finishing services in accordance with project specifications outlined on the Texas SmartBuy portal.

University of Texas Health Science Center at Tyler

POSTED

DEADLINE

General Renovation ContractingThe contract involves full-scope interior remodeling of courthouse courtrooms, requiring comprehensive management of all trade coordination, permitting, scheduling, and strict adherence to building codes and regulatory standards. The work demands expert execution across multiple disciplines to ensure seamless integration of mechanical, electrical, plumbing, and finishes within a sensitive public facility environment. All phases must be carefully planned and documented to maintain operational continuity and compliance with state and federal requirements for government buildings. Submitted proposals are due by August 25, 2026, under the NAICS code 238310 for interior contractors, and the contract is structured as a subcontract through the Mississippi Department of Finance and Administration. The project is located within Mississippi state courthouses, with performance requirements focused on precision, safety, and minimal disruption to judicial proceedings. The contractor is expected to deliver turnkey solutions with full accountability for timelines, quality control, and regulatory approvals without reliance on external oversight beyond the terms specified in the agreement.

POSTED

DEADLINE

Drywall and Interior FinishesThe contract pertains to the installation of gypsum board along with associated interior finishing tasks including taping, texturing, and surface preparation for painting. Work is to be performed at a designated location in Little Falls with a zip code of 56345-4173, under the NAICS code 238310 which classifies it as drywall and insulation work. The solicitation is structured as a subcontract and was posted on July 27, 2026, with a mandatory response deadline of August 4, 2026. The contracting activity is administered by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, and all work must be completed in accordance with the specifications and timelines outlined in the solicitation posted via the DIBBS platform.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Drywall, Painting, and Interior FinishesThe contract encompasses the full scope of interior finishing work including the installation of drywall, taping, texturing, and painting of walls and ceilings, along with the finishing of trim and baseboards. All work must meet industry standards for quality and durability, ensuring a seamless, professional finish throughout the interior spaces. The project is classified under NAICS code 238310 for drywall and insulation contractors and is structured as a subcontract opportunity. The solicitation was posted on July 27, 2026, with a formal response deadline of August 13, 2026, at 7:00 PM. Work is to be performed at a specified location in Fall River, Massachusetts, with a zip code of 02722. The contract is managed by the Massachusetts agency listed as F0138 - Purchasing, and while no set-aside type is designated, interested parties must submit proposals through the provided official portal by the stated deadline to be considered for award.

F0138 - Purchasing

POSTED

DEADLINE

Drywall and Ceiling InstallationThe contract involves the installation of new drywall, joint taping, finishing, and suspended ceiling systems specifically within staff rooms as part of an interior restoration project at the American Consulate in Sapporo. The work falls under NAICS code 238310, indicating it is a subcontract for drywall and insulation activities, and is tied to the Department of State’s operations. The project is scoped to ensure the rooms meet functional and aesthetic standards following restoration, with all components requiring precise application and finishing to comply with commercial building norms. The place of performance is clearly identified as Sapporo with postal code 064-0821, and all work must be completed on-site at this location. The solicitation was posted on July 27, 2026, with a response deadline of September 10, 2026, at 3:00 AM local time, giving interested parties approximately six weeks to prepare and submit proposals. The contract is classified as a subcontract, meaning the primary contractor will likely manage multiple vendors or specialized teams for different aspects of the installation. No set-aside provisions are specified, and while no point of contact information is provided, the official opportunity can be viewed through the provided SAM.gov link. Performance is expected to result in fully finished interior spaces suitable for official staff use, with attention to durability, safety, and compliance with applicable construction standards.

American Consulate Sappo

POSTED

DEADLINE

in about 1 month

Drain Well Grating and Synthetic Deck Panel RepairThe contract involves the repair or replacement of damaged drain well grating and synthetic deck panels on the well deck using marine-grade composite materials to ensure proper fit, functionality, and long-term structural integrity. Work must prioritize effective drainage and resilience against harsh maritime conditions, with all materials and installation methods meeting rigorous marine deployment standards. The project is scoped specifically for the well deck area, requiring precision in alignment and secure fastening to prevent future degradation or safety hazards. This subcontract opportunity, posted on July 26, 2026, with a response deadline of August 20, 2026, is issued under NAICS code 238310 for specialty trade contracting and is tied to the Naval Supply Systems Command Fleet Logistics Center in Yokosuka. Performance is required at the facility in Sasebo with a zip code of 8570063, indicating its location within a U.S. Navy operational site. The project is part of the Department of Defense’s infrastructure maintenance program and demands compliance with military-grade specifications for durability, corrosion resistance, and safety under heavy use and saltwater exposure.

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

Drywall and Partition InstallationThe contract pertains to the installation of new drywall partitions, ceiling systems, and wall finishes for the reconfiguration of office space under a subcontract agreement. The work is linked to the North American Industry Classification System code 238310, indicating it falls under drywall and insulation contracting services. The solicitation was posted on July 25, 2026, with a response deadline of August 17, 2026, at 7:00 PM, providing potential bidders approximately four weeks to submit proposals. The project is being managed by the Ministry of Water, Environment and Climate Change under the Government of Jamaica, though specific details regarding the location of the work, point of contact, or set-aside provisions are not provided. The contract is accessible via a public portal linked to the Jamaica E-Procurement System, which may require registration for detailed submission guidelines and documentation.

Ministry of Water Environment and Climate Change

POSTED

DEADLINE

More opportunities from Mississippi → MS DEPT FINANCE and ADMINISTRATION

Same awarding agency

Innovasea NexTrak AR Transponding Acoustic Release Receivers (24 units) with integrated underwater acoustic release capability, battery packs, activation probes, and associated accessories required for deployment as stationary acoustic telemetry receivers

Solicitation # 9250-27-R-RFIN-00007

Mississippi State University is seeking 24 Innovasea NexTrak AR Transponding Acoustic Release Receivers equipped with integrated underwater acoustic release functionality, along with配套 battery packs, activation probes, and all necessary accessories for use as stationary acoustic telemetry receivers. These devices are designed for long-term underwater deployment to monitor and track acoustic signals from tagged marine organisms, with the added capability of remote release for recovery. The solicitation, identified by number 9250-27-R-RFIN-00007, was posted on July 29, 2026, and responses are due by August 12, 2026. The procurement is categorized under state and local government procurement, with the contract to be performed within Mississippi. Debra Raines of Mississippi State University serves as the primary point of contact and can be reached via email at draines@procurement.msstate.edu for inquiries regarding the bid.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 22 hours ago

DEADLINE

Angela Griffin - Contracting Officer

Solicitation # 1701-27-R-IFBD-00006

The Mississippi Department of Military is seeking qualified contractors through a solicitation issued by Contracting Officer Angela Griffin, identified by solicitation number 1701-27-R-IFBD-00006. The opportunity, posted on July 29, 2026, requires responses to be submitted by September 3, 2026, and is classified under the SLED category, indicating it is directed toward state, local, or educational government entities. The place of performance is located within the state of Mississippi, though specific city or zip details are not provided. This solicitation does not specify a NAICS code or set-aside type, leaving the scope open to general government contracting. Primary point of contact for inquiries is Regina Arnold, reachable via email at RARNOLD@MIL.MS.GOV or by phone at 601-961-5557. Additional details and the full solicitation document can be accessed through the official state portal linked in the posting.

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Angela Griffin - Contracting Officer

Solicitation # 1701-27-R-IFBD-00005

The Mississippi Department of Military is soliciting proposals for the position of Contracting Officer under solicitation number 1701-27-R-IFBD-00005, with the announcement posted on July 29, 2026, and responses due by September 3, 2026. This opportunity is classified under the SLED category, indicating it is directed toward state, local, or educational entities, and the place of performance is located within Mississippi. The primary point of contact for inquiries is Regina Arnold, who can be reached via phone at 601-961-5557 or email at RARNOLD@MIL.MS.GOV. No set-aside type or NAICS code has been specified, and the office address details are not provided. Interested parties should access the full solicitation details through the official UI link provided, which leads to the Mississippi Department of Finance and Administration’s contract bidding portal.

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Multi-Tank Isolation and Fluid Management SystemMississippi State University is seeking a subcontractor to design and supply a specialized fluid management system for use in multi-treatment agricultural research trials, with the primary goal of preventing cross-contamination between treatments. The system must include isolated fluid reservoirs and corresponding plumbing that ensures complete physical and operational separation of liquids used in different experimental conditions, maintaining the integrity of research data. The components must be engineered for durability, precision, and ease of cleaning, capable of withstanding repeated use in field and laboratory settings while remaining compatible with a range of agricultural chemicals and biological agents. The contract is open for responses until August 11, 2026, and falls under NAICS code 326199 for other plastic product manufacturing, indicating the likely use of high-grade plastic components in the system’s construction. While the agency’s physical location and point of contact details are not specified, the performance location is expected to support field-based agricultural research conducted by the university.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Pressurized Gas Delivery System IntegrationMississippi State University is seeking a subcontractor to supply and integrate a regulated pressurized gas system, such as carbon dioxide or nitrogen, designed to deliver consistent spray pressure and precise dosing for research applications. The system must meet strict industry standards for reliability and control, ensuring accurate and repeatable performance in sensitive laboratory environments. The contract is open for submission with a response deadline of August 11, 2026, and falls under NAICS code 333912, indicating involvement in industrial machinery manufacturing. The place of performance and exact location details are not specified, but the work is expected to align with the university’s research infrastructure needs. All proposals must be submitted by the stated deadline to be considered, and no set-aside provisions are indicated for this solicitation.

Air and Gas Compressor Manufacturing

POSTED

DEADLINE

Precision Boom and Nozzle System SupplyMississippi State University is seeking a subcontractor to supply precision boom arms and anti-drift nozzles designed for variable row spacing and contamination-free chemical application in controlled research environments. The equipment must support accurate, repeatable deployment of agricultural inputs across diverse experimental plots without cross-contamination between treatments, ensuring data integrity in field trials. The system requires adjustable configurations to accommodate varying crop row widths and operational conditions typical in research settings. The solicitation is open for responses until August 11, 2026, with the contract classified under NAICS code 332999 for other fabricated metal product manufacturing. The procurement is issued as a subcontract without a specific set-aside designation, and performance is expected to align with the university’s research infrastructure needs. All bids must meet technical specifications for durability, precision, and compatibility with existing application systems used in Mississippi State’s agricultural research programs. Interested parties are directed to the official posting for submission guidelines and detailed requirements.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Custom Research Plot Sprayer Design and FabricationMississippi State University is seeking a subcontractor to design, engineer, and fabricate a custom agricultural sprayer system tailored for research applications, with compatibility for sub-compact tractors and adaptability to high tunnel environments and wide-row crop configurations. The system must be precision-engineered to meet specific research needs, ensuring accurate application of liquids while maintaining maneuverability in tight spaces and diverse field layouts. The contract is classified under NAICS code 333111, indicating a focus on agricultural machinery manufacturing, and is posted with a response deadline of August 11, 2026, following a July 28, 2026, release date. The project requires full-scale development from concept through fabrication, with an emphasis on durability, ease of integration with existing equipment, and scalability for variable crop conditions. No set-aside provisions are specified, and performance is expected to align with the university’s research objectives in precision agriculture and field experimentation.

Farm Machinery and Equipment Manufacturing

POSTED

DEADLINE

Optional Crushed Stone Supply (Option No. 2)This contract pertains to the potential additional supply of crushed stone designated as Size 610, contingent upon the exercise of Option No. 2 by the owner. It is structured as a subcontract under the NAICS code 328310, which classifies it within the crushed and broken stone manufacturing industry. The opportunity was posted on July 28, 2026, with a response deadline set for September 1, 2026, providing contractors a limited window to submit proposals should they wish to be considered for the optional work. The contracting agency is MPTAP, affiliated with the Mississippi Department of Finance and Administration, and the work is expected to be performed within the state of Mississippi, though specific location details are not provided. The option to procure additional crushed stone is not guaranteed and will only be triggered if the owner elects to activate this contractual provision, making the scope of work conditional and dependent on future project needs.

POSTED

DEADLINE

in about 1 month

Mobilization and Demobilization ServicesThe contract entails the mobilization and demobilization of equipment, personnel, and site infrastructure for a project with a fixed duration of 75 days. All activities including the deployment of resources at the outset and the orderly removal of assets and personnel upon project completion are required to be executed in accordance with specified standards. The work falls under NAICS code 237310, indicating it relates to commercial and institutional building construction services, and is structured as a subcontract under the Mississippi Department of Finance and Administration. The solicitation was posted on July 28, 2026, with responses due by September 1, 2026, and the project is administered by the MPTAP agency, though specific location details and point of contact information are not provided in the data.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

in about 1 month

Pavement Marking and StripingThe contract calls for the installation of thermoplastic and cold-plastic pavement markings in white and yellow, to be completed after the paving work has been finalized. The work is classified under NAICS code 238990 and is structured as a subcontract, indicating it is part of a larger construction effort likely tied to roadway infrastructure improvements. The solicitation was posted on July 28, 2026, with a response deadline of September 1, 2026, giving interested parties approximately six weeks to submit proposals. The awarding agency is MPTAP under the Mississippi Department of Finance and Administration, and the work is to be performed within the state of Mississippi, though specific location details such as city or zip code are not provided. There is no set-aside designation or description, and no point of contact is listed, suggesting bidders must rely on the provided public link for further inquiries or documentation.

All Other Specialty Trade Contractors

POSTED

DEADLINE

in about 1 month

Traffic Control and Signage ManagementThe contract titled Traffic Control and Signage Management requires comprehensive traffic control services during construction activities, encompassing the installation and maintenance of temporary signage, cones, and flagging personnel to ensure public safety and smooth traffic flow. It also includes the removal of existing traffic stripes to support roadway modifications. The work is being managed under a subcontract arrangement by MPTAP, the Mississippi Department of Transportation agency, with performance expected to occur within the state of Mississippi. Bidders must submit responses by the deadline of September 1, 2026, and the work falls under the NAICS code 238990 for other specialized trade contractors. The contract does not specify a set-aside category or detailed point of contact, and the place of performance is not defined beyond the state level. All relevant information is accessible via the provided public link on the Mississippi government portal.

All Other Specialty Trade Contractors

POSTED

DEADLINE

in about 1 month

Crushed Stone and Granular Material Supply and PlacementThe contract calls for the supply and placement of crushed stone designated as Size 610 along with granular material for use in base layers, encompassing all necessary excavation and preparation work to support proper installation. The work must meet specified engineering standards to ensure structural integrity and durability of the base layers for infrastructure applications. Performance is expected to be carried out in Mississippi under the oversight of MPTAP, with a response deadline set for September 1, 2026, and the solicitation posted on July 28, 2026. This subcontract falls under NAICS code 328310, which identifies the industry as crushed and broken stone mining and production. Interested parties must submit proposals prior to the deadline, and all activities must comply with technical and logistical requirements outlined in the bidding documentation accessible through the provided state link.

POSTED

DEADLINE

in about 1 month