Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on June 18, 2018. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Easy Power Arch Analysis Software

Awarded
W911SD-18-R-0067Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541330
New
Surge & Transient System Detailed DesignThis subcontract opportunity with Garney Companies, Inc. involves providing detailed engineering and design services for a municipal wastewater effluent force main surge and transient system for projects within the Charles County Government. The scope of work includes the design of surge tanks, standpipes, and large diameter ductile iron and prestressed concrete cylinder pipe force mains exceeding 36 inches. Additionally, the contractor will perform engineering for bypass pumping, line stops, and pipe tapping, ultimately delivering final stamped design drawings and specifications through 60, 90, and 100 percent submission phases. The procurement is specifically set aside for SBA certified Women-Owned Small Businesses and Department of Transportation Disadvantaged Business Enterprises under NAICS code 541330. Interested parties must submit their responses by November 9, 2026.
Garney Companies, Inc.

POSTED

about 5 hours ago

DEADLINE

in 11 days
NAICS: 541330
New
Pure Water Southern California Direct Potable Reuse Testing Facility
Solicitation # pure-water-southern-california-direct-potable-reuse-testing-facility
Kiewit Infrastructure West Co. is soliciting proposals for the Pure Water Southern California Direct Potable Reuse Testing Facility project located in California. This opportunity is specifically set aside for small businesses, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, and Women-Owned Small Businesses, falling under NAICS code 541330. The solicitation was posted on October 29, 2026, with a response deadline of November 3, 2026. Interested parties should coordinate with the primary point of contact, Sepideh Aria, for further details regarding the submission process and project requirements.
Kiewit Infrastructure West Co.

POSTED

about 5 hours ago

DEADLINE

in 5 days
NAICS: 541330
New
Business Impact Analysis and Update Disaster Recovery Plan Services – Inland Empire Utilities Agency
Solicitation # business-impact-analysis-update-disaster-recovery-plan-services-inland-empire-utilities-agency
Aanko Technologies Inc. is soliciting certified DBE and SBE sub-consultants and suppliers to provide professional services for the Inland Empire Utilities Agency in San Bernardino and Riverside Counties, California. The scope of work focuses on emergency management, business continuity planning, technical writing, data collection, and the updating of IT and disaster recovery plans. This opportunity is targeted toward firms specializing in administrative management, engineering services, computer systems design, and public relations. Interested parties must submit their responses by November 17, 2026. The project falls under several NAICS codes, including 541611, 541330, 541512, and 541820. Primary coordination for this solicitation is handled by Liz Jordan-Wettstein at Aanko Technologies Inc.
Aanko Technologies Inc.

POSTED

about 5 hours ago

DEADLINE

in 19 days
NAICS: 541330
New
SLED
On-Call Structural and Seismic/Disaster Engineering Services
Solicitation # FAS 2026-037
The City of Seattle Finance and Administrative Services Capital Development division is seeking to establish two on-call contracts for professional structural and seismic/disaster engineering services under solicitation FAS 2026-037. The selected consultants will provide technical expertise on an as-needed basis for small to medium projects throughout the planning, design, procurement, and construction phases, utilizing delivery methods such as Design-Bid-Build, Job Order Contracting, and the Small Works Roster. The scope of work includes structural engineering studies, seismic evaluations, confidence testing, fall protection design, and the preparation of construction documents stamped by a licensed engineer. All deliverables must adhere to specific CAD standards, including software compatibility with AutoCAD 2025.1.3 and AIA/US National CAD Standard V5. Eligible firms must be licensed to practice in Washington State and the City of Seattle, demonstrate experience with current code compliance, and provide three relevant projects completed within the last seven years. The contract features an initial one-year term with up to four optional one-year renewals, for a maximum duration of five years. Evaluation of proposals is based on relevant technical experience (40 percent), approach and methodology (30 percent), and an inclusion plan (15 percent) focusing on women and minority-owned businesses. Responses are due by December 2, 2026, via the OpenGov portal, with a target contract execution date of December 15, 2026. Consultants are required to maintain Commercial General Liability insurance and comply with various local and federal regulations, including ADA and City of Seattle labor ordinances.
Finance and Administrative Services

POSTED

about 13 hours ago

DEADLINE

in about 1 month
NAICS: 541330
New
International
Geotechnical Analysis and Stability ModelingThis subcontract for Geotechnical Analysis and Stability Modeling involves providing professional engineering analysis for prime contractors working on Upper Thames River Conservation Authority dam projects in Canada. The scope of work focuses on reviewing structural data and seepage at armour stone retaining walls, confirming embedment depths, and updating slope stability analyses utilizing the Slope/W model. The final deliverables for this engagement include comprehensive Geotechnical Reports and updated Slope/W models. To qualify for this contract, the service provider must hold a valid P.Eng license and ensure all work complies with the Ontario Accessibility Standards and the LRIA Technical Bulletin. Interested parties must submit their responses by November 18, 2026.
Upper Thames River Conservation Authority

POSTED

about 14 hours ago

DEADLINE

in 20 days
NAICS: 541330
New
International
R.T. Orr Dam Geotechnical Investigations
Solicitation # 2026-05
The Upper Thames River Conservation Authority is soliciting proposals for geotechnical investigations and assessments of the R.T. Orr Dam located in Stratford, Ontario. The project, which initiates in 2026 and must be substantially completed by March 15, 2027, is based on recommendations from a 2023 Dam Safety Review by D.M. Wills Associates Limited. The scope of work includes reviewing existing structural data, conducting a detailed seepage investigation at the downstream left armour stone retaining wall, performing supplementary field investigations for embankment slope stability, installing two nested monitoring wells in both earth embankments, and updating stability analyses for armour stone structures. All work must adhere to the LRIA Technical Bulletin for Geotechnical Design and Factors of Safety and meet Ontario Accessibility Standards for electronic deliverables. Proposals must be submitted electronically via the bids and tenders platform by 3:00 PM Eastern Daylight Time on November 18, 2026. The selection process utilizes a two-envelope system where technical qualifications in Envelope A are evaluated before the cost proposal in Envelope B is opened. Award decisions are based on best value, considering experience, understanding of the work, proposed methodology, schedule, and cost reasonableness. Selected consultants must provide proof of professional licensing, WSIB standing, and required insurance policies, while maintaining strict confidentiality regarding project information.
Upper Thames River Conservation Authority

POSTED

about 14 hours ago

DEADLINE

in 20 days
NAICS: 541330
New
SLED
Traffic Signal Installation Oversight and Quality AssuranceThe Traffic Signal Installation Oversight and Quality Assurance subcontract involves providing technical supervision and oversight for prime contractors working on regional signal synchronization projects for the City of Aliso Viejo. The selected provider will be responsible for conducting on-site field supervision to ensure that installation contractors adhere to approved plans, specifications, and estimates, as well as Caltrans signal installation standards. Key deliverables include the performance of post-construction walkthroughs and the submission of detailed installation compliance reports and walkthrough documentation. This project is located in Aliso Viejo, California, with a response deadline set for December 2, 2026.
City of Aliso Viejo

POSTED

about 15 hours ago

DEADLINE

in about 1 month
NAICS: 541330
New
SLED
Traffic Signal Infrastructure Design and PS&E PreparationThis subcontract opportunity involves providing professional engineering design services for regional signal synchronization projects within the City of Aliso Viejo, California. The selected contractor will support prime contractors by preparing comprehensive Plans, Specifications, and Estimates for traffic signal equipment and infrastructure improvements, while also developing technical responses and bid advertisements. A valid California Professional Engineer license is required to perform this work. The project culminates in the delivery of a complete PS&E package, with a response deadline set for December 2, 2026.
City of Aliso Viejo

POSTED

about 15 hours ago

DEADLINE

in about 1 month
NAICS: 541330
New
SLED
Traffic Data Collection and Field Study ServicesThis subcontract for Traffic Data Collection and Field Study Services supports prime contractors on regional signal synchronization projects for the City of Aliso Viejo. The scope of work involves comprehensive traffic analysis, including seven-day 24-hour machine counts, intersection turning movement counts, and floating car studies utilizing GPS and synchronized video analysis. All operations must be conducted within Caltrans right-of-way in strict accordance with 2026 CTFP Guidelines, with final deliverables consisting of field review memos and summarized count data provided in Excel format. The project is located in Aliso Viejo, California, under NAICS code 541330. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline set for December 2, 2026.
City of Aliso Viejo

POSTED

about 15 hours ago

DEADLINE

in about 1 month
NAICS: 541330
New
SLED
Oso Parkway/Pacific Park Drive/Glenwood Drive Regional Traffic Signal Synchronization Project
Solicitation # 20261026016
The City of Aliso Viejo is soliciting proposals for a professional licensed consultant to provide regional traffic signal synchronization services for the Oso Parkway, Pacific Park Drive, and Glenwood Drive corridor. The project involves coordinating traffic signals across multiple jurisdictions, including the Cities of Aliso Viejo, Laguna Hills, Mission Viejo, Laguna Niguel, the County of Orange, and Caltrans, extending from Moulton Parkway to the SR-241 Northbound On-Ramp. The projected period of performance is from April 1, 2027, to September 30, 2030. The selected consultant will be responsible for providing all necessary labor, materials, and equipment to implement optimized signal timing in accordance with the Regional Traffic Signal Synchronization Master Plan and the City's Local Signal Synchronization Plan. Proposals are due by December 2, 2026, and must be submitted as one hard copy and one electronic PDF on a USB drive, with the cost proposal in a separate sealed envelope. Award decisions will be based on a weighted evaluation of the consultant's ability and skills, character and reputation, cost reasonableness, ability to meet time requirements, financial resources, and previous experience with the vendor. The contract is governed by the laws of the State of California with venue in Orange County. Key requirements include compliance with California prevailing wage laws, adherence to the City's Minority Business Enterprise program, and the submission of annual political contribution disclosures.
City of Aliso Viejo

POSTED

about 15 hours ago

DEADLINE

in about 1 month
NAICS: 541330
New
SLED
Travel Lift Infrastructure Structural Design
Port of Brookings-harbor

POSTED

about 16 hours ago

DEADLINE

in about 1 month
NAICS: 541330
New
SLED
Electrical Service and Exterior Lighting Design
Port of Brookings-harbor

POSTED

about 16 hours ago

DEADLINE

in about 1 month

AI Contract Overview

Show more

The U.S. Army Department of Directorate of Public Works, acting through the W6QM Micc-West Point agency of the Department of Defense, issued a notice of conditional contract award on June 18, 2018, to Easy Power, LLC. This award, identified by award number W911SD-18-P-0197 and solicitation number W911SD-18-R-0067, is for the procurement of Easy Power Arch Analysis Software. The acquisition was conducted as a sole-source procurement under NAICS code 541330, with the performance of the contract located in West Point, New York. This notification serves as a conditional award and does not constitute a legally binding contract until a formal written agreement containing terms and conditions acceptable to the Department is executed. The Department reserves the right to cancel the notice at any time prior to the final execution. Following this announcement, all submissions related to the request for quotes are considered public records available for inspection in accordance with FAR Regulations and USCC Codes.

General Info

Agency

Department Of Defense → W6QM Micc-West Point

Contract Value

$14,655

NAICS

541330 - Engineering Services

Place of Performance

U.S. Army, USAG West Point Military Academy, WEST POINT, NY, 10996, USA

Set-Aside

NONE

Awardee

EASYPOWER LLC

Award Issued Date

Documents

1

Notice of Conditional Award W911SD-18-P-0197 - Easy Power Arch Analysis Software

PDF, Low priorityaward
Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseAwarded
Posted

Sources Sought

Notice updated

Notice type changed from Sources Sought to Special Notice. Response deadline changed from May 29, 2018 to Jun 8, 2018. The notice title changed. The notice description changed.

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QM Micc-West Point
Contacts1 person available
OfficeWEST POINT, NY, 10996-1514, USA
Organization / AgencyDepartment Of Defense → W6QM Micc-West Point
Office AddressWEST POINT, NY, 10996-1514, USA
Contacts
Ignacio Cordova
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
AWARD # W911SD-18-P-0197 NOTIFICATION LETTER EASY POWER ARCH ANALYSIS SOFTWARE June 18, 2018 SUBJECT: Notice of Conditional Contract Award(s) under Solicitation # W911SD-18-R-0067, (Easy Power Arch Analysis Software) This letter is in regards to the subject Request for Quotes (RFQ), issued by the U.S. Army Department of Directorate of Public Works (DPW) for (Easy Power Arch Analysis Software). The requirement was clearly definable, and the risk of contractor performance is minimal. In this case, Sole Source plays a dominant role in the process. The Department has evaluated the quote received using the criteria identified in the RFQ, and the Department is hereby announcing its conditional contract award(s) to the following bidder(s): - Easy Power, LLC. As provided in the Solicitation, the Notice of Conditional Contract Award is subject to execution of a written contract and, as a result, this Notice does NOT constitute the formation of a contract between the Department and the apparent successful vendor. The vendor shall not acquire any legal or equitable rights relative to the contract services until a contract containing terms and conditions acceptable to the Department is executed. The Department further reserves the right to cancel this Notice of Conditional Contract Award at any time prior to the execution of a written contract. As stated in the RFQ, following announcement of this award decision, all submissions in response to the RFQ are considered public records available for public inspection pursuant FAR Regulations, and USCC Codes. Further information can be obtained by visiting www.fpds.gov, once all supporting data has been finalized.

More opportunities from Department Of Defense → W6QM Micc-West Point

Same awarding agency

NAICS: 331210
New
Federal
Supply of Yellow Brass 65/35 (UNS Alloy C-268)This subcontract involves the procurement and delivery of raw Yellow Brass 65/35, specifically UNS Alloy C-268, to support prime contractors on U.S. Army W6QM Micc-West Point projects. The selected provider is responsible for sourcing and delivering brass sheets or stock that strictly adhere to purity and composition standards. To ensure full compliance with MIL-B-1563 material requirements, the supplier must provide all necessary Mill Test Reports and material certifications. The opportunity is designated as a total Small Business Set Aside under NAICS code 331210 and is managed by the Department of Defense for performance in West Point, New York. Interested parties must adhere to the response deadline of October 29, 2026.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

3 days ago

DEADLINE

in about 5 hours
View Details
NAICS: 332710
New
Federal
Manufacturing of USMA Breast and Waist PlatesThis small business set-aside subcontract involves the fabrication, polishing, and finishing of military insignia buckles, specifically USMA breast and waist plates, for prime contractors supporting the Department of Defense at W6QM Micc-West Point. The scope of work requires the use of precision stamping or casting equipment to drape waistplates to a 3.5 inch radius, applying mirror-polished fronts with matte backs and edges, and adding necessary identification markings. All production must strictly adhere to MIL-B-1563, MIL-DTL-1563/12B, and MIL-DTL-1563/13B standards. The project is categorized under NAICS code 332710 and will be performed in West Point, New York. Interested parties should note the tight turnaround for responses, with a posting date of October 26, 2026, and a deadline of October 29, 2026. The final deliverable consists of fully finished and packaged breast and waist plates meeting all specified military requirements.
Machine Shops

POSTED

3 days ago

DEADLINE

in about 5 hours
View Details
NAICS: 315210
New
Federal
SOLICITATION - U.S. Army West Point India White Coats, Trousers, Dresses
Solicitation # W911SD-26-Q-A114
The Mission and Installation Contracting Command West Point is soliciting quotes for a multi-year, firm-fixed-price contract to manufacture India White coats, trousers, and skirts for male and female cadets at the United States Military Academy. This procurement is a 100 percent set-aside for total small business concerns under NAICS code 315210. The contract features an ordering period from November 1, 2026, through October 31, 2033, with an initial delivery estimated for May 2027. A unique material sourcing arrangement is in place where the government provides all fabric and associated materials as government furnished items during the base year, while the contractor becomes solely responsible for sourcing all materials during the option years. The award will be based on the lowest price source selection, provided the offeror passes a technical evaluation of required samples for each garment type. All quotes must be submitted electronically via email to the designated point of contact by November 16, 2026, at 2:00 PM EST, which is also the strict deadline for the receipt of physical samples. Technical requirements are governed by specific product descriptions and military standards, including mandatory first article testing for the base year's first delivery order. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.
Cut and Sew Apparel Contractors

POSTED

3 days ago

DEADLINE

in 18 days
View Details
NAICS: 332215
New
Federal
SOLICITATION Cadet Swords USMA West Point
Solicitation # W911SD-27-Q-A002
The Mission and Installation Contracting Command Installation Contracting Office at West Point, NY, is soliciting quotes for the manufacture and delivery of Cadet Sabers, including scabbards and covers, for graduating cadets of the United States Military Academy. This requirement is a 100 percent set aside for total small business concerns under NAICS code 332215. The procurement is structured as a firm fixed price contract consisting of a base year for approximately 1,700 sabers and two subsequent option periods. The base period delivery date is firmly set for April 12, 2027, with subsequent years ending on December 4. Technical requirements are governed by Purchase Description WP-PD-26-02 and specific design diagrams, requiring materials such as stainless steel and gold plating per MIL-DTL-45204, with covers in West Point Gray (Pantone Cool Gray 5 C). Award will be based on a lowest price source selection process where technical compliance is evaluated on a pass/fail basis. To be considered, offerors must submit one complete sample sword assembly and a two-yard fabric sample by the firm closing date of October 30, 2026. Final acceptance is subject to first article inspection and conformance sampling per ASQ/ANSI Z1.4 at West Point, NY. All items must include unique item identification in accordance with MIL-STD-130 and MIL-STD-129.
Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

3 days ago

DEADLINE

in 1 day
View Details
NAICS: 315990
New
Federal
SOURCES SOUGHT-U.S. Army United States Military Academy (USMA), Cadet Issued Breast and Waist Plates
Solicitation # W911SD-27-Q-A009
The U.S. Army is issuing a Sources Sought notice for the procurement of Cadet Issued Breast and Waist Plates for the United States Military Academy at West Point. This is an information and planning effort to determine if there are at least two qualified small businesses capable of fulfilling the requirement to support a small business set-aside. The anticipated contract structure consists of a base year plus four one-year option periods under NAICS code 315990 for Apparel Accessories and Other Apparel Manufacturing. The technical requirements specify that both the breastplates and waistplates must be manufactured from Yellow Brass 65/35 (UNS Alloy C-268) with mirror-like polished fronts and matte finish backs and edges. These items must adhere to MIL-B-1563, MIL-DTL-1563/12B for waistplates, and MIL-DTL-1563/13B for breastplates. Specific dimensions and thicknesses are required, and identification markings must be placed on the back of each buckle. Packaging must follow standard commercial guidelines, with each item wrapped and packed 50 units per box. Interested firms must provide their company details, small business status, and evidence of previous experience with similar requirements to facilitate a capability determination.
Apparel Accessories and Other Apparel Manufacturing

POSTED

3 days ago

DEADLINE

in about 5 hours
View Details
NAICS: 315210
Federal
Cadet Sabers (CL 2031) SupplyThis subcontract, managed by the Department of Defense for W6QM Micc-West Point, requires the manufacture or sourcing of 1,700 ceremonial Cadet Sabers. The production must strictly adhere to the CL 2031 design requirements and the refined specifications, drawings, and photos dated October 16, 2026, specifically regarding the steel, hilt, and scabbard materials. The project is designated as a total Small Business Set Aside under NAICS code 315210, with performance taking place in West Point. All 1,700 completed sabers must be delivered by the final deadline of April 12, 2027.
Cut and Sew Apparel Contractors

POSTED

13 days ago

DEADLINE

in 1 day
View Details
NAICS: 541380
Federal
Garment Inspection and Quality ControlThis subcontract opportunity, titled Garment Inspection and Quality Control, is issued by the Department of Defense through W6QM Micc-West Point. The project requires independent quality assurance and inspection services for manufactured blouses intended for US Army uniform projects. The selected contractor will be responsible for ensuring strict compliance with the Revised Women's Overblouse Purchase Specification by performing dimensional checks against size charts, verifying seam strength, and conducting visual color match checks for White 521 using light boxes and spectrophotometers. The scope of work culminates in the delivery of detailed inspection reports and certifications of compliance. This is a total Small Business Set Aside under NAICS code 541380, with the place of performance located in West Point, New York. The solicitation was posted on October 16, 2026, and the deadline for responses is November 12, 2026.
Testing Laboratories and Services

POSTED

13 days ago

DEADLINE

in 14 days
View Details
NAICS: 313310
Federal
Army Shade White 521 Fabric SupplyThis subcontract opportunity, managed by the Department of Defense through W6QM Micc-West Point, involves the sourcing and delivery of white fabric and trims for prime contractors working on US Army uniform projects. The selected provider will supply bolts of fabric, buttons, thread, and interfacing that strictly adhere to the technical and visual specifications of Army Shade White 521, specifically meeting the Revised Women's Overblouse Purchase Specification. The project is designated as a total Small Business Set Aside under NAICS code 313310, with performance taking place in West Point, New York. Interested parties must submit their responses by November 12, 2026, following the posting date of October 16, 2026.
Textile and Fabric Finishing Mills

POSTED

13 days ago

DEADLINE

in 14 days
View Details
NAICS: 315220
Federal
Women's Over-Blouse ManufacturingThis subcontract opportunity, managed by the Department of Defense through W6QM Micc-West Point, involves the full assembly and manufacturing of short-sleeve Women's Over-Blouses for US Army uniform projects. The selected contractor will be responsible for cutting fabric to pattern, sewing, and assembling garments using industrial equipment to ensure all finished products strictly adhere to the Revised Women's Overblouse Purchase Specification and provide an exact visual match to Army Shade White 521. The project is designated as a Total Small Business Set Aside under NAICS code 315220, with performance taking place in West Point. Interested parties must submit their responses by November 12, 2026, to support prime contractors in delivering these specialized garments to the agency.
Men’s and Boys’ Cut and Sew Apparel Manufacturing

POSTED

13 days ago

DEADLINE

in 14 days
View Details
NAICS: 315210
Federal
USMA SS Women's Overblouse
Solicitation # W911SD27QA004
The Mission and Installation Contracting Command at West Point is soliciting a Firm Fixed Price contract for the manufacture and delivery of short-sleeve Women's Overblouses in Army Shade White 521. This requirement is a 100% set-aside for total Small Business concerns under NAICS code 315210. The contract spans a multi-year period from December 1, 2026, through November 30, 2031, with an initial delivery estimated for May 2027. The garments must be constructed from a 5.0 ounce polyester/cotton blend and feature specific design elements including a six-button front closure, convertible collar, and functional shoulder loops, with sizing available from 4S to 22L. Award will be based on the lowest price source selection, provided the offeror is responsible and the submitted sample meets all technical specifications. Offerors must submit one sample garment for dimensional and technical evaluation by the closing date. Key compliance requirements include Berry Amendment self-certification of the country and city of origin for all materials and goods, and adherence to MIL-STD-129 and MIL-STD-130 for marking and labeling. Invoicing and payments will be processed electronically through the Wide Area WorkFlow system. All quotes and inquiries must be directed to Shawn Valastro via email.
Cut and Sew Apparel Contractors

POSTED

13 days ago

DEADLINE

in 14 days
View Details
NAICS: 335313
Federal
Locking Power Connector SupplyThis contract involves the supply of 44 locking power connectors, specifically NEMA L5-20P plugs rated at 20 amps and 125 volts, designed to provide secure power connections for lighting fixtures. It is designated as a subcontract with a total small business set-aside under the Small Business Administration regulations, ensuring that only small businesses are eligible to compete for the opportunity. The procurement aligns with the North American Industry Classification System code 335313, which covers electrical equipment manufacturing. Administered by the Department of Defense through the W6QM Micc-west Point office, the contract is set for performance within the 10996 ZIP code area. The procurement was posted on April 15, 2026, though specific details such as the solicitation number, point of contact, and exact location within the region remain unspecified. The contract facilitates supplying critical components needed for reliable and safe electrical connections in military or government-related lighting installations.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

7 months ago

DEADLINE

N/A
View Details
NAICS: 332999
Federal
Heavy-Duty Pipe Clamp SupplyThe contract involves the supply of 58 heavy-duty pipe clamps designed to support lighting fixtures by mounting them securely to truss or rigging systems. Each clamp is rated to handle a load capacity of 1,100 pounds, ensuring robust performance under demanding conditions. This procurement is designated as a subcontract under a Total Small Business Set-Aside in accordance with FAR 19.5, emphasizing support for small business participation. The contract is associated with the Department of Defense, specifically through the W6QM Micc-west Point agency, and falls under the NAICS code 332999, which covers miscellaneous fabricated metal product manufacturing. The place of performance is identified by the ZIP code 10996, indicating the general location of execution. Although some organizational and contact details are not specified, the contract was posted on April 15, 2026, and the full details can be accessed via the provided SAM.gov link.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

7 months ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 541330
Federal
Bradley STS/SSTS Extension Modification
Solicitation # W56HZV-15-C-0099
W4GG Hq US Army Tacom

POSTED

over 8 years ago

DEADLINE

N/A
View Details
NAICS: 541330
Awarded
Federal
WCDAS General Electric Switchgear equipment, periodic preventative maintenance
Solicitation # 1333MD18QNEEB0029
Department Of Commerce Noaa

POSTED

over 8 years ago

CLOSED

over 8 years ago
View Details
NAICS: 541330
Awarded
Federal
R--A/E Facility Master Planning
Solicitation # VA24417R0425
244-NETWORK Contract Office 4 (36C244)

POSTED

over 8 years ago

CLOSED

over 8 years ago
View Details
NAICS: 541330
Awarded
Federal
Indefinite Delivery Contracts for 8(a) Small Business for Architect-Engineer Contruction Management
Solicitation # W912DR-17-R-CMS1
W2SD Endist Baltimore

POSTED

over 8 years ago

CLOSED

over 8 years ago
View Details
NAICS: 541330
Closed
Federal
Sources Sought - Coast Guard Machinery Assessment Program Support
Solicitation # 70Z04018RFI61050
Sflc Procurement Branch 3(00040)

POSTED

over 8 years ago

CLOSED

over 8 years ago
View Details
NAICS: 541330
Closed
Federal
Laboratory Intelligence Validated Emulator Test Systems Production with Verification and Validation, Threat Software Package Production Refresh, and Closed Loop Test and Evaluation Sustainment Support
Solicitation # RM18-Laboratory_Intelligence_Validated_Emulator_Test_Systems_Production_with_Verification_and_Validation_Threat_Software_Packag

POSTED

over 8 years ago

CLOSED

over 8 years ago
View Details
NAICS: 541330
Closed
Federal
Labratory Intelligence Validated Emulator Test Systems Production with Verification and Validation, Threat Software Package Production Refresh, and Closed Loop Test and Evaluation Sustainment Support
Solicitation # Labratory_Intelligence_Validated_Emulator_Test_Systems_Production_with_Verification_and_Validation_Threat_Software_Package_Prod

POSTED

over 8 years ago

CLOSED

over 8 years ago
View Details
NAICS: 541330
Closed
Federal
Laboratory_Intelligence_Validated_Emulator_Test_Systems_Production_with_Verification_and_Validation_Threat_Software_Package_Production_Refresh_and_Closed_Loop_Test_and_Evaluation_Sustainment_Support
Solicitation # Laboratory_Intelligence_Validated_Emulator_Test_Systems_Production_with_Verification_and_Validation_Threat_Software_Package_Pro

POSTED

over 8 years ago

CLOSED

over 8 years ago
View Details
NAICS: 541330
Federal
Program Management and Engineering expertise and services at various locations worldwide
Solicitation # 19AQMM18R0245

POSTED

over 8 years ago

DEADLINE

N/A
View Details
NAICS: 541330
Closed
Federal
FUEL TANK INSPECTION
Solicitation # 70Z03118QLBL39100
Base ALAMEDA(00031)

POSTED

over 8 years ago

CLOSED

over 8 years ago
View Details
NAICS: 541330
Closed
Federal
MRAP MATV STS/SSTS
Solicitation # w56hzv18r0241
W4GG Hq US Army Tacom

POSTED

over 8 years ago

CLOSED

over 8 years ago
View Details
NAICS: 541330
Awarded
Federal
R--Professional, Administrative and Management Support Services
Solicitation # FA8540-11-R-0004

POSTED

over 8 years ago

CLOSED

over 8 years ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS