This Solicitation opportunity from Tennessee was posted on July 10, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Electric Service Pull Box

Closed

Z4790State & Local

Submission Closed07/16/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 327999

New

DIBBS

Supply of Paint Roller Frames (NSN 8020017067468)This subcontract involves the procurement or manufacture of 142 paint roller frames identified by NSN 8020017067468 to support prime contractors delivering DLA Troop Support supply contracts. The work is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. The selected provider must possess a valid CAGE Code and UEI registration. All deliverables must strictly adhere to military standards, specifically requiring shipment marking and storage per MIL-STD-129 and palletization according to RP001 DLA Packaging Requirements. The response deadline for this opportunity is November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

NONMETALLIC SPECIAL SH

Solicitation # SPE8E5-27-T-0310

Solicitation SPE8E5-27-T-0310 is a small business set-aside request for quotations issued by the Department of Defense, specifically DLA Troop Support, for the procurement of 67 feet of nonmetallic special shaped section, identified by NSN 9390-00-547-2123. A critical technical requirement specifies that the material must be provided in minimum lengths of 10 feet. The delivery lead time is 167 days after receipt of order, with a required delivery date of August 9, 2027, and a need ship date of April 26, 2027. The place of performance and delivery is Tinker AFB, Oklahoma, with inspection and acceptance occurring at the destination. The contract carries stringent security and regulatory requirements, including CMMC Level 2 certification via a C3PAO and compliance with ITAR and EAR export controls. Technical data is restricted to approved contractors with US/Canada Joint Certification Program certification. Packaging must adhere to MIL-STD-129 and RP001, with specific standards for hazardous materials under FED-STD-313 and TQ requirement IP025. Financial administration is handled through the Wide Area Workflow system, and the procurement is subject to the Buy American Act and the Berry Amendment. Offerors are encouraged to submit quantity ranges via the DIBBS portal.

POSTED

DEADLINE

Solicitation # SPE7L3-27-T-1561

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE8E5-27-T-0365

Solicitation SPE8E5-27-T-0365 is a fixed-price procurement for 5,608 units of nonmetallic channel, identified by NSN 9390-00-137-6758. The contract is managed by the Department of Defense through DLA Troop Support Construction and Equipment and is designated as a total small business set-aside under NAICS code 327999. Delivery is required within 65 days after order, with a need ship date of October 28, 2026, and an original required delivery date of March 23, 2027. The items are to be delivered FOB Origin to DLA Distribution San Diego, California, with both inspection and acceptance occurring at the destination. The contractor must adhere to strict technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Specific prohibitions are in place regarding the use of mercury and the minimization of plastics in packaging materials. Cybersecurity compliance is mandatory, requiring a CMMC Level 2 Self-Assessment and adherence to DFARS 252.204-7012 for safeguarding covered defense information. Payment and invoicing must be processed electronically via the Wide Area WorkFlow system. Additionally, the contract incorporates various FAR and DFARS clauses concerning the Buy American Act, the Berry Amendment, and prohibitions on covered defense telecommunications equipment.

POSTED

DEADLINE

Solicitation # SPE8E5-27-T-0347

This procurement, issued by the Defense Logistics Agency Troop Support Construction and Equipment, is for the supply of one roll of yellow reflective sheeting. The material must be 8 inches wide, 7-8 mil thick, and meet Type 1, Class 1 specifications. Each roll is defined as 50 yards in length. The item is subject to a shelf life requirement of 18 months and must be delivered within 20 days after the order. Delivery is FOB Destination, with shipping addresses located in both the United States and Japan. The contractor is required to provide a Certificate of Quality Compliance and adhere to strict packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. Special marking code 33 for shelf life applies, and the use of plastics for wrapping or cushioning should be avoided. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. The procurement incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information, hazardous material labeling per the Hazard Communication Standard, and compliance with the Buy American Act and Berry Amendment. Inspection and acceptance will take place at the destination.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8E5-27-T-0318

Solicitation SPE8E5-27-T-0318 is a request for quotations for the procurement of 27 lengths of nonmetallic rod, specifically identified by NSN 9390012231437. Each rod must have a length of 96.0 inches and a diameter of 2.0 inches. The requirement is issued by DLA Troop Support Construction and Equipment and is designated as a HUBZone set-aside. The need ship date is April 26, 2027, with an original required delivery date of May 31, 2027, and a delivery lead time of 167 days after order. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements (RP001) and MIL-STD-129 for marking, while emphasizing the avoidance of plastics for wrapping and dunnage. Technical and quality requirements are governed by the DLA Master List, and the contractor must ensure that mercury is not intentionally added to the supplies. Payment and invoicing must be processed through the Wide Area Workflow system. Compliance with the Buy American Act, the Berry Amendment, and various DFARS cybersecurity and hazardous material regulations is required. The solicitation is managed by Nafis Beyah and requires quotes to be submitted via the DIBBS portal.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-2811

Solicitation SPE7L1-27-T-2811 is a request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of one knob, identified by NSN 5355-01-264-6274 and part piece number 13226E0101. The requirement is based on Technical Data Package Rev B Gen 3 and Basic Drawing NR 97403 13226E0101 Revision A. This is a small business set-aside procurement with a required delivery date of October 26, 2026, and a delivery timeframe of five days after receipt of order. Shipping is designated as FOB Origin, with the final destination located in Varnville, South Carolina. The contract mandates strict adherence to quality and packaging standards, specifically ASTM D3951 and MIL-STD-129 for marking and labeling, with DLA Master List requirements and RP001 taking precedence. Inspection and acceptance will occur at the destination. Key regulatory compliance includes the Buy American and Balance of Payments Program, NIST SP 800-171 assessment requirements, and safeguarding of covered defense information. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

NONMETALLIC SPECIAL SH

Solicitation # SPE8E5-27-T-0311

Solicitation SPE8E5-27-T-0311 is a small business set-aside for the procurement of 939 feet of nonmetallic special shaped rubber sections, identified by NSN 9390005926864. The requirement specifies a quantity variance of plus or minus 10 percent and a delivery period of 85 days after order, with a need ship date of November 2, 2026, and an original required delivery date of April 28, 2027. The items are to be delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. Technical compliance requires adherence to ASTM D2000, which supersedes drawing BMS1-24, and specific compliance with paragraphs 1, 3, and 12 of engineering data list drawing 200415485. The contract mandates strict quality and security standards, including a CMMC Level 2 self-assessment and safeguarding of covered defense information. Packaging and marking must comply with MIL-STD-129 and DLA requirement RP001, with special marking code 33 applied for a 36-month extendable shelf life. Hazardous materials must be labeled according to the Hazard Communication Standard. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American Act and Berry Amendment. The procurement is managed by DLA Troop Support, Construction and Equipment, with the primary point of contact being Nafis Beyah.

POSTED

DEADLINE

SHEET, NONMETALLIC, PROT

Solicitation # SPE8E5-27-T-0363

Solicitation SPE8E5-27-T-0363 is a Request for Quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment for the procurement of nonmetallic protective sheets, described as protective seals and special shaped sections under NSN 9390-01-595-7239. The requirement consists of multiple line items, including CLINs 0001, 0002, and 0003, each for a quantity of one unit. Delivery is required within five days after receipt of order, with original required delivery dates ranging from April 15, 2026, to October 23, 2026. Shipping is designated as FOB Origin for specific items, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, with palletization following DLA requirement RP001. A critical requirement for MRAP palletized shipments is the application of two 10x10 inch fluorescent yellow stickers with bold black MRAP lettering, though specific OEM background colors may be used. The items are subject to a non-extendable 18-month shelf life (Type I, Code K). Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act, Berry Amendment, and DFARS cybersecurity reporting standards.

Defense Logistics Agency

POSTED

DEADLINE

TAPE, PROTECTIVE, PLASTI

Solicitation # SPE8E5-27-T-0361

Solicitation SPE8E5-27-T-0361 is a procurement issued by the Defense Logistics Agency for one roll of protective plastic tape, identified by NSN 9390-01-382-8297 and Boeing Distribution Services Inc part number 191344ITL. The required tape must be 12 inches wide with .010 inch holes spaced .025 inches apart, with each roll consisting of 36 yards. The delivery is required within 20 days after order, with the shipping terms set as FOB Destination. Inspection and acceptance will also occur at the destination. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 for non-hazardous commercial packaging. All shipments must be marked and labeled according to MIL-STD-129, and hazardous materials must comply with TQ requirement IP025 and FED-STD-313. Administrative requirements include electronic invoicing through Wide Area WorkFlow and compliance with various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and NIST SP 800-171 assessment requirements.

Defense Logistics Agency

POSTED

DEADLINE

Nonmetallic Hose Assembly FabricationThis subcontract involves the manufacture and supply of nonmetallic hose assemblies for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Maritime supply chain. The scope of work requires the fabrication of 1/4 inch tube size assemblies with a nominal overall length of 9.75 inches, adhering strictly to NSN 4720008340512 and RA001 technical specifications. Performance for this contract will take place in San Diego, California. Compliance is mandatory regarding the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 and 7009 cybersecurity standards. Interested parties must submit responses by November 9, 2026, for this requirement categorized under NAICS code 327999.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Nonmetallic Hose Assembly SupplierThis subcontract opportunity is for a supplier to provide nonmetallic hose assemblies to prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing or sourcing NSN 4720-01-428-6944 assemblies, ensuring that all products are free from mercury or mercury-containing compounds. Strict adherence to MIL-STD-129 marking, MIL-STD-2073-1E packaging, and DLA RP001 requirements is mandatory for this project. The scope of work requires the delivery of three completed, marked, and packaged hose assemblies to DLA Distribution DDSP in New Cumberland, Pennsylvania. This is a total small business set-aside under NAICS code 327999. Interested parties must submit their responses by November 11, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 14 days

AI Contract Overview

Nashville Electric Service is soliciting six Electric Service Pull Boxes meeting stringent technical specifications: each unit must be 30 inches wide by 48 inches long by 36 inches deep, constructed monolithically with open bottoms and straight walls to allow for easy grade adjustments, and rated to support a minimum vertical load of 15,000 pounds (Tier 15). The cover must feature a minimum coefficient of friction of 0.50, include provisions for lift hooks, and permanently display the load rating, “ELECTRIC” logo, and manufacturer identification through molded or engraved markings. Fastening must be accomplished using stainless steel ½-inch penta head bolts with self-centering or floating stainless steel nuts. Only four approved manufacturers and their specific part numbers—NEWBASIS PCA304836S-11E, OLDCASTL 30481844, APC CP304836HU2299PS, and HUBBELL A1B304836A017—are acceptable; no substitutions or alternate brands will be considered. The solicitation, issued under number Z4790, requires electronic submission through the vendor Bid Center by 2:00 PM local time on July 16, 2026. Delivery is to be performed in Nashville, Tennessee, with no FOB terms specified and no detailed payment, invoicing, or contract administration information provided. The procurement is handled as a non-federal municipal bid with no reference to federal acquisition regulations, special contract requirements, evaluation weighting, or socioeconomic provisions. The award is likely based on the Lowest Price Technically Acceptable criterion, given the mandatory technical compliance and limited flexibility in product sourcing.

General Info

Nashville Electric Service seeks six Tier 15 pull boxes from approved manufacturers, due July 16, 2026, no substitutions allowed.

Agency

Tennessee → Nashville Electric Service

NAICS

327999 - All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

Place of Performance

Nashville, TN, USA

Set-Aside

NONE

Documents

Z4790 Request For Bid for Electric Service Pull Box

rfb

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJul 10

Solicitation

Response DeadlineJul 16

Deadline has passed

Submission Closed

07/16/2026, 07:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyTennessee → Nashville Electric Service

Contacts1 person available

OfficeNashville, TN, USA

Organization / AgencyTennessee → Nashville Electric Service

Office AddressNashville, TN, USA

Contacts

Tiffany CaruthersProcurement Contact

contact@example.gov

+1 (555) 000-0000

Full Description

D ELECTRIC SERVICE PULL BOX. 30" WIDE X 48" LONG X 36" DEEP, MONOLITHIC CONSTRUCTION, OPEN BOTTOM, STRAIGHT WALLS FOR EASY GRADE ADJUSTMENTS, AND MINIMUM VERTICAL LOAD RATING OF 15,000 LBS (TIER 15). THE LOAD RATING, "ELECTRIC" LOGO, AND IDENTIFICATION OF THE MANUFACTURER SHALL BE PERMANENTLY MOLDED OR ENGRAVED ONTO THE TOP SURFACE OF THE ENCLOSURE COVER. COVER SHALL HAVE A MINIMUM COEFFICIENT OF FRICTION OF .50 AND PROVISIONS FOR LIFT HOOKS. THE ENCLOSURE SHALL BE EQUIPPED WITH SELF-CENTERING OR FLOATING STAINLESS STEEL NUTS AND THE COVER FASTENED TO THE ENCLOSURE WITH STAINLESS STEEL 1/2" PENTA HEAD BOLTS. Approved Manufacturers and/or Part Numbers: NEWBASISPCA304836S-11E OLDCASTL30481844 APCCP304836HU2299PS HUBBELLA1B304836A017