Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Electrical Installation & Commissioning of Level 3 EV Chargers

Active

State & Local

Response Deadline08/14/2026, 03:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the full electrical installation, wiring, grounding, and commissioning of four Level 3 DC fast chargers, with two units installed at each of two designated sites, each charger featuring four charging ports for a total of 16 ports. The scope includes all necessary electrical infrastructure to support the 150kW DC charging capacity at each unit, ensuring compliance with the National Electrical Code and seamless integration with the local utility grid. Work must be performed to meet all safety, performance, and regulatory standards applicable to high-power EV charging systems, including proper load calculations, circuit protection, and grounding methodologies. The solicitation is classified as a subcontract under NAICS code 238210 for electrical contracting and is issued by the State of Rhode Island through its Department of Transportation. Bidders must submit proposals no later than August 14, 2026, at 3:30 PM, with the opportunity posted on July 20, 2026. While the exact locations within the state are not specified in the provided data, the place of performance is within Rhode Island, and contractors are expected to coordinate with local utilities to ensure reliable power delivery and system interoperability. All work must be completed to support public EV charging infrastructure that meets state and federal requirements for reliability, accessibility, and safety.

General Info

Install 16-port Level 3 DC fast chargers at two Rhode Island sites with full electrical infrastructure.

Agency

State of Rhode IslandView Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

RI, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 03:30:00 PM UTCin 24 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyState of Rhode Island

ContactsNo contacts available

OfficeN/A

Organization / Agency

State of Rhode Island

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Full electrical installation, wiring, grounding, and commissioning of four 150kW DCFC chargers (two per site) with four ports each, including NEC compliance and utility integration.

Similar Contracts

Same NAICS industry code

Elevator Lobby 2 Way CommunicationsThe contract involves the installation of 23 new two-way communication boxes in the Port of Seattle terminal, covering 17 passenger elevators, 3 service elevators, and 3 ramp landing elevators. This work is part of an aviation infrastructure project managed by the Aviation Project Management Group, with the primary objective of enhancing safety and accessibility by ensuring all elevator lobbies are equipped with reliable emergency communication systems. The solicitation is posted as a forecast under NAICS code 238210, indicating it relates to electrical contracting services, and no set-aside specifications have been designated. Point of contact for inquiries is Angela Peterson, with Christina Burdett serving as the project manager; both can be reached via provided phone numbers and email addresses. The contract posting date is July 21, 2026, and all details are accessible through the Port of Seattle’s official solicitation portal.

Aviation Project Management Group

POSTED

about 15 hours ago

DEADLINE

Variable Frequency Drives (VFD) Replacement Phase 3 (DBB)The Port of Seattle’s Aviation Facilities & Infrastructure division is preparing to replace the final 125 remaining failing Robicon Variable Frequency Drives (VFDs) as part of Phase 3 of its VFD Replacement Project. This effort involves the full removal of outdated units and installation of new VFD equipment, with all systems to be fully integrated into the Port’s Direct Digital Controller (DDC) network. The integration will enable real-time monitoring of energy consumption, output control data, and system efficiency, ensuring ongoing operational optimization. The scope includes all necessary wiring, testing, and commissioning activities to deliver a complete and functional system as specified. The project is classified under NAICS code 238210 and is being managed as a Design-Bid-Build (DBB) procurement with no set-aside designation. Yanet Maldonado is the primary point of contact for inquiries, with Sharon Miick serving as the project manager. The forecast was posted on July 21, 2026, and further details can be accessed through the Port’s official solicitation portal.

Aviation Facilities & Infrastructure

POSTED

about 15 hours ago

DEADLINE

Operational Security Cameras Bagwell and North Cargo AreasThe contract entails the full spectrum of design, permitting, and construction services required to install 50 high-resolution surveillance cameras across 43 distinct locations in the Bagwell and North Cargo Operations areas of the Port of Seattle. The primary objective is to enhance security and operational oversight by replacing outdated systems with advanced imaging technology that supports detailed forensic investigations and enforces the Port’s movement rules and regulations. In the Bagwell area, the new camera network will expand coverage to include key drive lanes and entrances, areas currently under-monitored as existing units focus on conveyor systems and security doors. In the North Cargo Operations zone, the solution will introduce flexible, user-controlled Pan Tilt Zoom units to deliver dynamic, broad-area surveillance that adapts to varying operational needs. The project is managed by the Aviation Project Management Group under the Port of Seattle, with primary point of contact Angela Peterson and Project Manager Randa Williams available for coordination. The effort aligns with NAICS code 238210 for electrical contractors and is posted as a forecast with no set-aside designation. The installation will significantly upgrade the Port’s existing security infrastructure, ensuring comprehensive visual monitoring of critical cargo movement corridors and operational zones to improve safety, accountability, and regulatory compliance. All work must be completed in accordance with Port requirements and timelines, with no detailed solicitation number yet assigned but available through the official portal link for ongoing updates.

Aviation Project Management Group

POSTED

about 15 hours ago

DEADLINE

Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement (Re-bid)The Port of Seattle's Aviation Project Management Group is re-bidding a project to replace the existing aqueous film-forming foam (AFFF) fire suppression system, which contains per- and polyfluoroalkyl substances (PFAS), at the Rental Car Facility located in SeaTac. The scope involves the complete removal of the contaminated AFFF system, including hazardous materials and affected components, followed by the design and installation of a new full dry chemical fire suppression system. This new system will include all necessary components such as storage tanks, control valves, pumps, piping networks, sprinkler heads, and reserve tanks, and must be integrated with the facility's existing fire alarm system to ensure full operational compatibility and compliance with safety standards. The project is categorized under NAICS code 238210 for specialty trade contractors and is part of a broader initiative to eliminate PFAS-containing systems across Port facilities. Primary contact for the solicitation is Todd Rehm, with Project Manager Pat Nakamura available for technical inquiries. The forecast was posted on July 21, 2026, and all work is expected to occur at the designated facility on 3150 S 160th Street, SeaTac.

Aviation Project Management Group

POSTED

about 15 hours ago

DEADLINE

Parking Garage UPSThe contract entails the demo and replacement of the existing uninterruptible power supply system in a parking garage that supports critical infrastructure including ticketing kiosks and automated gates. The project involves installing new UPS equipment along with associated electrical components such as subpanels, feeders, disconnects, and breakers to ensure reliable backup power. The new system will feature integrated data connectivity for remote alarm monitoring and system status reporting to enhance operational awareness and maintenance responsiveness. All work must be executed to maintain continuous functionality of the parking facility’s critical systems during the transition. The opportunity is managed by the Aviation Project Management Group under the Port of Seattle, with the North American Industry Classification System code 238210 indicating electrical contracting services. Primary point of contact for inquiries is Yanet Maldonado, reachable via email and phone, with JJ Jordan serving as the project manager. The solicitation was posted on July 21, 2026, and is categorized as a forecast, suggesting it represents a planned procurement rather than an active solicitation at this time. The performance location is not specified beyond the Port of Seattle jurisdiction, and no set-aside details are provided.

Aviation Project Management Group

POSTED

about 15 hours ago

DEADLINE

Electrical Unit Price Portwide 2026The contract pertains to comprehensive electrical work for the Port of Seattle under the Electrical Unit Price Portwide 2026 solicitation, covering installations of raceways, wiring, medium voltage cabling, boxes, transformers, electrical devices, temporary power and lighting systems, testing, and grounding—all in strict compliance with applicable code-enforcing agency requirements. The Contractor is responsible for providing all labor, tools, equipment, materials, and incidental items necessary to complete tasks as directed by the Port through a Work Authorization, with labor classified according to the specified Schedule of Unit Prices to ensure consistent pricing and scope alignment. All work must be performed in accordance with the Port of Seattle’s standards and procedures, with performance obligations tied to the agency’s operational needs. The contract is administered by Port Construction Services, with primary point of contact Heather Bowden and Project Manager Lesley Miles available for coordination and inquiries. The solicitation is forecasted for 2026 under NAICS code 238210, indicating electrical contracting services, and is accessible via the Port’s official procurement portal for potential bidders seeking to participate in future work authorizations under this unit price framework.

Port Construction Services

POSTED

about 15 hours ago

DEADLINE

Electrical InstallationThe contract encompasses comprehensive electrical installation services for a Texas Department of Transportation project, requiring both rough-in and finish work including the installation of conduit, wiring, outlets, lighting fixtures, and proper connection to the main power supply. All work must adhere to industry standards and be completed to ensure full functionality and safety of the electrical systems in the designated location. The opportunity is structured as a subcontract under NAICS code 238210, which corresponds to electrical contracting, and is open for bids with a deadline of September 2, 2026, at 6:00 PM. The solicitation was posted on July 21, 2026, and interested parties must respond through the Texas SmartBuy portal at the provided hyperlink. There is no set-aside designation specified, and the place of performance details are not yet defined.

Texas Department of Transportation

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Gate Automation and Control WiringThe contract involves the installation and integration of electrical wiring, control panels, safety sensors, and comprehensive testing for automated gate systems to ensure dependable and secure operation. All work must comply with industry standards for performance and safety, with emphasis on seamless system functionality under various operational conditions. The scope requires skilled execution of control circuitry, sensor calibration, and final testing protocols to guarantee system reliability and fail-safe operation. This is a subcontract under NAICS code 238210 for the City of Port Arthur, Texas, with a response deadline of August 5, 2026. The procurement is open for qualified subcontractors to submit bids through the PublicPurchase platform, with no set-aside designation specified. The place of performance is within the jurisdiction of the City of Port Arthur, and all work must be completed to meet the technical and operational expectations outlined in the solicitation. Contractors must be prepared to deliver fully tested and certified gate automation systems ready for immediate deployment.

City of Port Arthur

POSTED

about 20 hours ago

DEADLINE

Electric Sliding Gate Installation (2 Units)The contract involves the installation of two electric sliding gates, encompassing all necessary components such as track systems, motors, automation controls, and basic wiring, along with complete operational testing to ensure full functionality. The work is classified under NAICS code 238210 and is structured as a subcontract solicited by the City of Port Arthur in Texas, with a response deadline of August 5, 2026. The project requires precise execution to meet performance standards, and all materials and labor must be provided in compliance with the specified technical requirements. The place of performance is located in Port Arthur, Texas, with no additional set-aside provisions or agency-specific restrictions outlined. Interested bidders must submit proposals through the designated public procurement portal by the stated deadline.

City of Port Arthur

POSTED

about 20 hours ago

DEADLINE

Supply and Installation of Network Data Drop Points 1220020268648The contract pertains to the supply and installation of network data drop points at the Victoria Jubilee Hospital in Jamaica, under solicitation number 2331/6752 issued by the Kingston Public Hospital under the Government of Jamaica. The solicitation was posted on July 20, 2026, with a response deadline of July 28, 2026, at 7:00 PM local time, indicating a narrow window for prospective bidders to submit proposals. The project requires the provision and proper installation of data points to support hospital network infrastructure, ensuring reliable connectivity for medical and administrative systems. The work is to be performed on-site at the hospital, with no specified set-aside or NAICS code provided, suggesting open eligibility for qualified contractors. The contract does not list a point of contact, and all necessary information must be obtained through the official ePPS portal for Jamaica’s public procurement system.

Kingston Public Hospital

POSTED

about 21 hours ago

DEADLINE

Mechanical & Instrumentation Integration (Solenoid & Flow Meter)The contract entails the mechanical and instrumentation integration of a solenoid valve and flow meter into an existing system to enable fully automated operation. The scope requires precise electrical and control system modifications to ensure seamless communication and coordination between the new components and the current infrastructure, with emphasis on reliability, safety, and operational efficiency. All work must be performed in accordance with industry standards and existing system specifications, ensuring compatibility and minimal disruption to ongoing operations. The opportunity is classified as a subcontract under NAICS code 238210 and is posted by the state of Utah with a response deadline of August 6, 2026. There is no specified set-aside designation, and the place of performance and contact details are not provided in the data. Interested parties must review the full solicitation through the provided Utah Bonfire Hub link to obtain detailed technical requirements, submission guidelines, and any additional procedural instructions necessary for proposal development.

POSTED

about 23 hours ago

DEADLINE

Field Installation Supervision and Technical OversightThe contract involves on-site supervision of electrical installations for municipal park projects under the City of Issaquah, Washington, with a focus on ensuring quality assurance, adherence to applicable electrical codes, and seamless coordination with contracted vendors and crews. The work requires technical oversight to guarantee that all electrical systems are installed correctly, safely, and in full compliance with local and national standards. Supervisors will be responsible for monitoring progress, reviewing workmanship, identifying and resolving deviations, and serving as the primary point of technical contact between the city and field teams to maintain project integrity and timeline. This subcontract is open for bidding with a response deadline of August 14, 2026, and is classified under NAICS code 238210 for electrical contracting services. The work will be performed exclusively at municipal park sites within Issaquah, requiring a strong local presence and familiarity with regional building regulations. Although no specific set-aside provisions or point of contact are provided, interested parties must respond by the stated deadline to be considered for award. The contract emphasizes hands-on field presence over remote management, demanding experienced personnel capable of making real-time technical decisions and ensuring compliance under dynamic construction conditions.

City of Issaquah

POSTED

about 23 hours ago

DEADLINE

More opportunities from State of Rhode Island

Same awarding agency

Permitting, Utility Coordination & As-Built DocumentationThe contract requires the successful bidder to secure all necessary state and local permits, coordinate directly with National Grid to facilitate utility connections, and deliver complete As-Built drawings along with comprehensive compliance documentation at project conclusion. The scope is narrowly focused on permitting and utility coordination activities tied to infrastructure projects under the State of Rhode Island’s jurisdiction, with no flexibility for set-asides or special procurement classifications. All deliverables must meet regulatory standards and be submitted in a form suitable for official recordkeeping and future reference. The opportunity is classified as a subcontract under NAICS code 541330, indicating professional, scientific, and technical services related to engineering and related fields. Proposals must be submitted by the deadline of August 14, 2026, at 3:30 PM, with the solicitation posted on July 20, 2026. All work must be performed in alignment with the State of Rhode Island’s requirements, though specific location details and point of contact information are not provided within the posted data. Bidders are expected to rely on the official vendor portal at ridop.ri.gov for additional instructions, site-specific parameters, and submission guidelines.

Engineering Services

POSTED

DEADLINE

Operations & Maintenance (O&M) Services (5-Year Term)The contract entails a five-year operations and maintenance services agreement for electric vehicle charging infrastructure, covering comprehensive remote monitoring, prompt fault resolution, scheduled preventive maintenance, and regular uptime reporting to ensure reliable system performance. The scope requires the use of prepaid ChargePoint Assure or an equivalent service offering that meets or exceeds the specified standards for maintenance and monitoring capabilities. Services must be delivered across all designated locations within the State of Rhode Island, with performance metrics tied to system availability and responsiveness. The contract is structured as a subcontract under the agency’s broader procurement framework, with a solicitation window open until August 14, 2026, and published on the Rhode Island Department of Public Works vendor bidding portal. The North American Industry Classification System code 541690 identifies the service category as other scientific and technical consulting services.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

EV Charger Supply & Equipment ProcurementThe contract calls for the supply of four UL-listed and NRTL-certified 150kW DC fast chargers, each equipped with four ports, designed to meet the latest operational and safety standards. The chargers must be fully compliant with OCPP 2.0.1 for open communication, ISO 15118 for seamless vehicle-to-grid communication, and Buy America requirements mandating domestic content and manufacturing. All equipment must be delivered and installed to support public charging infrastructure aligned with state and federal clean transportation goals. This subcontract is issued by the State of Rhode Island under the NAICS code 334418, which classifies it within the manufacturing of electric lighting and wiring equipment. The solicitation was posted on July 20, 2026, with a response deadline of August 14, 2026, at 3:30 PM. The contract is open for bidding through the Rhode Island Department of Public Works vendor portal, and while location specifics for performance are not detailed, the procurement is intended for deployment within the state. Bidders must ensure full adherence to certification, compliance, and sourcing requirements to be considered for award.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Traffic Control, Signage & Bollard InstallationThe contract requires the installation of traffic control measures, MUTCD-compliant signage, and protective bollards to enhance safety around electric vehicle charging stations across the State of Rhode Island. All work must adhere strictly to federal and state transportation safety standards, ensuring clear visibility, proper placement, and durability of signage and physical barriers to protect both pedestrians and vehicles in high-traffic areas. The scope focuses exclusively on physical infrastructure improvements designed to mitigate risks and improve navigation around EV charging locations. This is a subcontract opportunity posted on July 20, 2026, with a response deadline of August 14, 2026, at 3:30 PM. The North American Industry Classification System code is 238990, indicating specialized construction services not elsewhere classified. The contract is administered by the State of Rhode Island through its Rhode Island agency office, with performance expected within the state’s jurisdiction. Bidders must be prepared to meet all regulatory and safety requirements without specifying exact locations, as the place of performance is not outlined in the posted details but will likely span multiple sites under state oversight.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Civil Site Work & Concrete Pad ConstructionThe contract involves civil site work including site grading, trenching, and the construction of reinforced concrete pads designed to support direct current fast charging (DCFC) units, all in strict compliance with Rhode Island Department of Transportation civil standards. The work requires precise execution to ensure structural integrity and regulatory alignment, with the concrete pads specifically engineered to bear the loads and operational demands of DCFC equipment. All activities must adhere to state-mandated specifications for drainage, compaction, reinforcement, and surface finish to guarantee long-term durability and safety. This subcontract opportunity is open for bids with a response deadline of August 14, 2026, at 3:30 PM, following a posting date of July 20, 2026. It falls under NAICS code 236220 for nonresidential building construction, indicating a focus on commercial infrastructure development. While the exact location within Rhode Island is not specified, performance is expected to occur on state-managed sites subject to RIDOT oversight. Bidders must be prepared to demonstrate compliance with all state civil engineering standards and possess the necessary expertise in heavy civil construction, concrete work, and site preparation for electric vehicle charging infrastructure.

Commercial and Institutional Building Construction

POSTED

DEADLINE

OER EVSE Level 3 Pawtucket/Central Falls Train Station & Warwick Park & RideThe Office of Energy Resources is soliciting a vendor to install four Direct Current fast chargers totaling 150kW each, with each charger capable of simultaneously powering four electric vehicles, at two designated locations in Rhode Island: the Pawtucket/Central Falls Commuter Rail Station parking lot and the Warwick Park and Ride parking lot. The project encompasses all site work, electrical connections, and equipment furnishing required for full operational deployment. Included with each installation are initial station activation and configuration services, a five-year prepaid Commercial Cloud Plan Subscription offering comprehensive station management features, and five years of prepaid ChargePoint Assure or an equivalent service plan to ensure ongoing maintenance, monitoring, and support. Bidders are required to attend a prebid meeting on Wednesday, July 29, 2026, at 9:00 AM, beginning at the Pawtucket location and followed immediately by the Warwick site. Proposals must be submitted no later than August 14, 2026, at 3:30 PM, under solicitation number RFQ27006847, with all inquiries directed to Katherine Missell at the provided email address.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Data UnavailableThe contract titled "Data Unavailable" was posted by the State of Rhode Island on July 17, 2026, with a response deadline set for January 20, 2028. It is classified as a subcontract opportunity but lacks critical details such as solicitation number, NAICS code, type of set aside, organization type, and specific scope of work. No information is provided regarding the trades, services, or place of performance, and the office address and point of contact are undefined. The contract link directs to the Rhode Island Department of Administration’s vendor bidding opportunities page, suggesting interested parties must seek additional information externally. Despite the absence of substantive data, the extended timeline indicates a potential long-term procurement process requiring proactive outreach to the agency for clarification.

POSTED

DEADLINE

Pavement Improvements - Putnam PikeThe project involves comprehensive pavement improvements along Putnam Pike from Danecroft Avenue to 300 feet west of George Waterman Road in the towns of Smithfield and Johnston within Providence County, Rhode Island. Work scope includes full-width micro-milling and asphalt overlay, installation of new traffic and pedestrian signals, pavement markings, ADA-compliant wheelchair ramps throughout the corridor, new cement concrete curbing and sidewalks, along with all necessary incidentals to ensure complete and accepted installation. The project is federally aided under STP-RESF(482) and STP-RESF(497) and falls under Rhode Island Contract No. 2026-CH-034. Solicitation number TCB26006443 was posted on July 17, 2026, with proposals due by August 14, 2026. The contracting authority is the State of Rhode Island through the Rhode Island Department of Transportation, and all work must be performed at the designated place of performance in Providence County. Primary contact for inquiries is M. Scott Stephens, reachable via phone at 401-574-8152 or email at michael.stephens@purchasing.ri.gov. The solicitation is classified under SLED agency type with no specified setaside, and additional details can be accessed through the official Rhode Island DOT bidding portal.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

MPA 639 Tent Rentals and Associated EquipmentThe State of Rhode Island is soliciting vendors to provide tent rentals and associated equipment for use by statewide agencies under contract MPA 639, identified by solicitation number OEV27006845. This procurement is open to qualified suppliers who can furnish durable, safe, and appropriately sized tents along with necessary ancillary items such as flooring, lighting, heating or cooling systems, and anchoring equipment to meet the operational needs of state entities across Rhode Island. The solicitation was posted on July 17, 2026, with responses due by January 20, 2028, providing a substantial window for prospective vendors to prepare and submit their proposals. All performance is expected to occur within the State of Rhode Island, and the contract is intended for use by state-level agencies under the SLED classification. Primary contact for inquiries and submissions is Jonathan Nadeau, who can be reached via email at jonathan.nadeau@purchasing.ri.gov or by phone at 401-574-8133. Vendors interested in accessing the full solicitation details must either download the document from the public bid board by clicking the “print/download solicitation” button or log into their WebProcure account. No specific NAICS code or set-aside designation is provided, indicating this opportunity is open to all eligible vendors without preferential classification. Participation requires adherence to all terms outlined in the official solicitation document, including delivery timelines, quality standards, and compliance with state procurement policies.

General Rental Centers

POSTED

DEADLINE

Warranty and Preventative Maintenance ProviderThe contract requires a three-year warranty covering all defects in materials, equipment, and workmanship, ensuring that any issues arising from manufacturing flaws or improper installation are addressed without additional cost to the State of Rhode Island. In addition to warranty coverage, the provider must perform all manufacturer-recommended maintenance and inspections throughout the warranty period to maintain optimal system performance and extend equipment life. Emergency service must also be available during this time to respond to critical failures promptly, minimizing operational disruption. The contract is structured as a subcontract under NAICS code 811212 and is issued by the Rhode Island agency, with responses due by August 13, 2026. All services are to be performed in alignment with manufacturer guidelines and state requirements, with no set-aside provisions specified.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Permitting, Commissioning, and Training ServicesThe contract titled Permitting, Commissioning, and Training Services requires the successful bidder to secure all necessary permits for the project, coordinate and facilitate required inspections, and carry out comprehensive system commissioning to ensure full operational readiness. The scope also includes providing detailed operational training to end users and delivering complete documentation to support ongoing system management and maintenance. The work is being procured as a subcontract by the State of Rhode Island under NAICS code 541690, which covers other scientific and technical consulting services. The solicitation was posted on July 16, 2026, with responses due by August 13, 2026, and all performance activities are expected to occur within the State of Rhode Island, though specific localities are not identified. There is no set-aside designation, and the point of contact information is not provided in the posting. Interested parties must submit proposals via the official Rhode Island Department of Public Works vendor bidding portal.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Civil and Site Work for Generator Pad and ProtectionThe contract requires the construction of a reinforced equipment pad or stabilized surface to serve as a secure mounting base for a generator, ensuring structural integrity and proper operational support. In conjunction with this, protective bollards must be installed to safeguard the generator and surrounding infrastructure from accidental vehicle impact or other physical damage. All work must include full restoration of any areas disturbed during construction, returning the site to its original condition or better, with attention to landscaping, grading, and erosion control as needed. The project is classified under NAICS code 238990 for other specialty trade contractors and is issued as a subcontract by the State of Rhode Island through its Department of Transportation. The solicitation was posted on July 16, 2026, with responses due by August 13, 2026, and all work is expected to be performed within the state boundaries under applicable state regulations and standards.

All Other Specialty Trade Contractors

POSTED

DEADLINE