Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Electrical Systems Installation

Active

State & Local

Response Deadline09/01/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the installation of electrical systems including conduits, wiring, grounding, and high-voltage cable systems with full insulation resistance and ground testing conducted in accordance with Nationally Recognized Testing Laboratory standards. The work must comply with all technical specifications and safety protocols required for high-voltage electrical infrastructure, ensuring systems are fully functional, safely grounded, and meet certified testing benchmarks. The contract is structured as a subcontract under NAICS code 238210, which classifies it as electrical contractor work, and it is managed by the Planning, Engineering and Construction agency under the Florida office. The solicitation was posted on August 2, 2026, and responses must be submitted no later than September 1, 2026, at 4:00 PM. Specific details regarding location, point of contact, and set-aside provisions are not provided, but performance is expected to occur within Florida, with all work subject to compliance with applicable codes and verification through certified testing procedures.

General Info

Electrical installation contract with high-voltage testing, compliant with NRTL standards, due September 1, 2026, in Florida.

Agency

Florida → Planning, Engineering and ConstructionView Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

FL, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 2

subcontract

Response DeadlineSep 1

Submission deadline

Response Deadline

09/01/2026, 04:00:00 PM UTCin 29 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyFlorida → Planning, Engineering and Construction

ContactsNo contacts available

OfficeN/A

Organization / Agency

Florida → Planning, Engineering and Construction

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of electrical conduits, wiring, grounding, and high-voltage cable systems with insulation resistance and ground testing per NRTL standards.

Similar Contracts

Same NAICS industry code

Elevator Lobby 2 Way CommunicationsThe contract involves the installation of 23 new two-way communication boxes in elevator lobbies across the terminal, including 17 passenger elevators, three service elevators, and three ramp landing elevators. This work is part of a broader effort to enhance emergency communication infrastructure within the airport facility and is being managed by the Aviation Project Management Group under the Port of Seattle. The project is forecasted with a posting date of July 31, 2026, and falls under NAICS code 238210, indicating it pertains to electrical contracting services. Primary point of contact is Angela Peterson, with Christina Burdett serving as the project manager, and all correspondence should be directed through the provided email addresses and phone numbers. The work location is at the Port of Seattle facility, though specific city or state details are not provided in the data.

Aviation Project Management Group

POSTED

about 7 hours ago

DEADLINE

Variable Frequency Drives (VFD) Replacement Phase 3 (DBB)The Port of Seattle will replace 125 aging Robicon variable frequency drives (VFDs) with new equipment as part of Phase 3 of its VFD Replacement initiative. This effort aims to upgrade outdated infrastructure to ensure system reliability and improve operational efficiency across aviation facilities and infrastructure. The new VFDs will be fully integrated with the Port’s Direct Digital Controller (DDC) system to enable real-time energy usage monitoring, output control readings, and efficiency tracking, enhancing the Port’s ability to manage power consumption and maintain optimal performance. The scope includes all necessary wiring, testing, commissioning, and installation of associated equipment required to deliver a fully functional and synchronized system. The work falls under NAICS code 238210 and is managed by the Aviation Facilities & Infrastructure division, with technical oversight from Project Manager Sharon Miick and primary point of contact Yanet Maldonado. Although the solicitation number and set-aside details are not specified, the forecast was posted on July 31, 2026, signaling upcoming procurement activities. The project is critical for modernizing the Port’s electrical infrastructure and supporting long-term sustainability goals through precise control and monitoring of motor-driven systems. All work must be performed on-site at the Port’s facilities, with full accountability for system integration, performance validation, and operational readiness upon completion.

Aviation Facilities & Infrastructure

POSTED

about 7 hours ago

DEADLINE

Operational Security Cameras Bagwell and North Cargo AreasThe contract requires the provision of design, permitting, and construction services to install 50 high-resolution cameras across 43 sites in the Bagwell and North Cargo Operations areas of the Port of Seattle. The primary objective is to enhance security and enforcement capabilities by replacing outdated systems with improved coverage, specifically targeting main terminal drive lanes and entrances previously unmonitored, with the goal of supporting forensic investigations and adherence to port movement rules. In the Bagwell area, the new cameras will shift focus from conveyor systems and security doors to critical transit corridors, while the North Cargo operations will benefit from flexible, user-controlled Pan Tilt Zoom units that provide broad surface area monitoring and dynamic viewing capabilities to address operational gaps. All work must be completed in accordance with specified technical and operational standards to ensure seamless integration with existing security infrastructure. The project is managed by the Aviation Project Management Group under the Port of Seattle, with primary point of contact Angela Peterson and Project Manager Randa Williams available for coordination. The North American Industry Classification System code 238210 identifies this as a specialty trade contracting effort focused on electrical and communication system installation. Although the solicitation has not yet been formally issued, the forecasted posting date is July 31, 2026, indicating this is a forward-looking opportunity for qualified contractors to prepare proposals. The place of performance is within the Port of Seattle’s operational boundaries, and all contractors must be prepared to navigate port-specific logistics, security protocols, and environmental constraints during installation and commissioning.

Aviation Project Management Group

POSTED

about 7 hours ago

DEADLINE

Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement (Re-bid)The Port of Seattle’s Aviation Project Management Group is planning to replace the existing Aqueous Film Forming Foam (AFFF) fire suppression system at the Rental Car Facility located in SeaTac with a full dry chemical system to eliminate contamination from per- and polyfluoroalkyl substances (PFAS). The project entails the complete removal of the current foam-based system, including all contaminated components such as tanks, piping, and sprinkler heads, followed by the design and installation of a new dry system comprising new storage tanks, control valves, pumps, sprinkler lines, and sprinkler heads, along with reserve tanks for system integrity. The new system must be fully integrated with the facility’s existing Fire Alarm System to ensure seamless operation and compliance with safety protocols. The work is classified under NAICS code 238210 and is being advertised as a re-bid under the title Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement, targeting an efficient and timely execution to minimize service disruption. Primary point of contact for inquiries is Todd Rehm, with Pat Nakamura serving as the Project Manager.

Aviation Project Management Group

POSTED

about 7 hours ago

DEADLINE

Parking Garage UPSThe contract involves the demonstration and full replacement of the existing uninterruptible power supply (UPS) system in a parking garage that supports critical operations including ticketing kiosks and automated gates. The scope includes installing new UPS equipment along with associated electrical infrastructure such as subpanels, feeders, disconnects, and circuit breakers to ensure reliable backup power. The new UPS system will feature integrated data connections to enable remote alarm monitoring and system diagnostics, enhancing operational awareness and response capabilities. All work will be performed at the Port of Seattle’s parking facility, under the oversight of the Aviation Project Management Group. The project is forecasted to be released on July 31, 2026, with no set-aside provisions indicated and NAICS code 238210 specifying electrical contracting services. Primary point of contact is Yanet Maldonado, reachable via email and phone, with JJ Jordan serving as the project manager for coordination and technical inquiries. All work must comply with the operational and safety standards required by the Port of Seattle, and performance is expected to be completed at the designated parking garage location without specified alternative sites.

Aviation Project Management Group

POSTED

about 7 hours ago

DEADLINE

Electrical Unit Price Portwide 2026_1 and _2This contract encompasses a broad range of electrical services to be performed across multiple Port of Seattle facilities including Seattle-Tacoma International Airport, maritime properties, and surrounding areas. The work includes but is not limited to the installation of raceways, wiring, medium voltage cabling, electrical boxes, transformers, temporary power and lighting systems, grounding, and associated testing, all in full compliance with applicable codes and regulations. The Contractor is responsible for providing all labor, tools, equipment, materials, and incidentals required to complete tasks as directed through Work Authorizations issued by the Port. Labor must be delivered according to the specified classifications outlined in the Schedule of Unit Prices, ensuring consistent pricing and accountability. The Port of Seattle anticipates a high volume of small-scale electrical projects over the coming year and plans to award two separate contracts under this solicitation to ensure sufficient capacity and rapid response times. The goal is to maintain operational continuity and meet dynamic project demands by leveraging two qualified contractors. The contract is identified under the NAICS code 238210 and is issued through Port Construction Services, with primary coordination handled by Heather Bowden and Lesley Miles. All work must be performed at designated Port-wide locations, and contractors are expected to adhere strictly to the terms and pricing structure detailed in the bid documents.

Port Construction Services

POSTED

about 7 hours ago

DEADLINE

Electrical Installation and Wiring ServicesThe contract titled Electrical Installation and Wiring Services is a subcontract opportunity under NAICS code 238210, intended for the installation of electrical systems including wiring, conduits, lighting, and power distribution solutions for commercial or infrastructure projects in Boston, Massachusetts, specifically targeting the zip code 02114. It is posted by the OCDDEPT01 - Executive Office of Housing & Livable Communities under the state of Massachusetts and requires compliance with all applicable electrical codes and safety standards for urban development initiatives. The solicitation was published on August 3, 2026, with a firm response deadline of August 17, 2026, at 10:00 PM Eastern Time, leaving bidders with a two-week window to submit proposals. The work scope demands experienced contractors capable of delivering full electrical infrastructure in high-density environments, with an emphasis on reliability, energy efficiency, and integration with existing municipal systems. Although no specific set-aside designation is provided, the contract is restricted to subcontractors and requires adherence to the standards expected by a state agency overseeing housing and livable communities. The place of performance is clearly located in Boston, and all deliverables must meet the technical and logistical demands of urban construction projects, with potential coordination required with other trade contractors and city regulatory bodies.

OCDDEPT01 - Executive Office of Housing & Livable Communities

POSTED

about 10 hours ago

DEADLINE

Electrical Installation for Highway LightingThe contract entails the installation of electrical systems along highway corridors, specifically focusing on conduit, wiring, and lighting fixtures to support highway lighting infrastructure. The work is classified under NAICS code 238210 for electrical contractors and is structured as a subcontract under a small business set-aside program that prioritizes participation by Small Business, Small Disadvantaged Business, Women-Owned Small Business, Disadvantaged Business Enterprise under the Department of Transportation, Minority Business Enterprise certified by NMSDC, and Woman Business Enterprise. The solicitation was posted on August 3, 2026, with a response deadline of August 12, 2026, and is managed by GEI Consultants, Inc. as the contracting organization, though specific performance locations and contact details are not provided. The project is aimed at enhancing highway safety and visibility through compliant and durable electrical installations in alignment with federal and state transportation standards.

GEI Consultants, Inc.

POSTED

about 12 hours ago

DEADLINE

RFO AWP-0772-00, HNL Fiber Optic Transmission System (FOTS) Design Support and Construction in Honolulu, HI

Solicitation # rfo-awp-0772-00-hnl-fiber-optic-transmission-system-fots-design-support-construction-honolulu-hi-0

The contract calls for the installation of a new Fiber Optic Transmission System at Daniel K. Inouye International Airport in Honolulu, Hawaii, to be carried out in two phases and includes conduit trenching and boring between three designated buildings. The work falls under NAICS codes 238210, 237130, and 237990 and has a construction magnitude estimated between one and five million dollars. Solicitation RFO AWP-0772-00 is set aside exclusively for small businesses, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses. The solicitation was posted on August 3, 2026, with responses due by August 15, 2026. All inquiries and submissions must be directed to Anna Ma, the Parsons Subcontract Administrator, at anna.t-ctr.ma@faa.gov or via phone at 360-204-4418. The project is managed by PTSI Managed Services, Inc., and the place of performance is firmly located in Hawaii.

PTSI Managed Services, Inc.

POSTED

about 12 hours ago

DEADLINE

RFO AWP-0772-00, HNL Fiber Optic Transmission System (FOTS) Design Support and Construction in Honolulu, HI

Solicitation # rfo-awp-0772-00-hnl-fiber-optic-transmission-system-fots-design-support-construction-honolulu-hi

The contract calls for the installation of a new Fiber Optic Transmission System at Daniel K. Inouye International Airport in Honolulu, Hawaii, executed in two phases with conduit trenching and boring connecting three buildings on site. The work falls under NAICS codes 238210, 237130, and 237990 and carries a construction magnitude between one and five million dollars. The solicitation is designated as a small business set-aside, reserved exclusively for Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business concerns. The solicitation number is RFO-AWP-0772-00-HNL-FIBER-OPTIC-TRANSMISSION-SYSTEM-FOTS-DESIGN-SUPPORT-CONSTRUCTION-HONOLULU-HI, posted on August 3, 2026, with a deadline for responses on August 15, 2026. Interested parties must coordinate with Anna Ma, Parsons Subcontract Administrator, via email at anna.t-ctr.ma@faa.gov or phone at 3602044418 for participation details. The place of performance is clearly identified as Hawaii, and the contracting entity is PTSI Managed Services, Inc.

PTSI Managed Services, Inc.

POSTED

about 12 hours ago

DEADLINE

Replacement Fiber Line

Solicitation # replacement-fiber-line

The contract entails the replacement of existing multi-mode fiber optic cabling with new 12-strand single mode fiber optic cabling to establish a direct connection between Building 2436 and Building 2443 at the Earle C. Clements Job Corps Center in Kentucky. All labor, equipment, and tools necessary to complete the on-site installation and deployment must be provided by the contractor in accordance with the specified scope of work. The project focuses exclusively on upgrading the fiber infrastructure to enhance bandwidth capacity and transmission efficiency through modern single mode technology. This solicitation is set aside for small businesses under the SBA programs, including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business. The NAICS code 238210 applies, indicating the work falls under communication and electronic installation services. The solicitation was posted on August 3, 2026, with responses due by August 10, 2026. All inquiries and correspondence should be directed to Miranda Wolfe at the provided contact information.

Earle C. Clements Job Corps Center

POSTED

about 12 hours ago

DEADLINE

AEA-0536, VORTAC (ART) Doppler Conversion, Watertown, NY

Solicitation # aea-0536-vortac-art-doppler-conversion-watertown-ny

The FAA is transitioning from an existing VHF Omnidirectional Range (VOR) facility in Watertown, New York, to a new Doppler VORTAC system with an offset TACAN, requiring the complete demolition of the current site and the construction of a fully integrated navigation asset. The Doppler VORTAC will feature an on-site 37’x37’ steel building housing the core equipment, supported by a 60-foot diameter counterpoise integrated into the roof structure, along with full foundation, site preparation, and utility installations. Adjacent to this main structure, an offset TACAN component will be installed as a 16’x16’x20’H walk-up steel tower, accompanied by its own dedicated foundations, site work, and utilities to ensure independent operational capability. The project is being managed by PTSI Managed Services, Inc (Parsons) under contract AEA-0536 and is solicited exclusively for small business set-asides, including categories such as Small Disadvantaged Business, Women-Owned Small Business, HUBZone, Veteran-Owned, and Service-Disabled Veteran-Owned Small Businesses. Responses are due by August 28, 2026, with primary point of contact Angela Stydinger at the FAA overseeing the procurement process.

PTSI Managed Services, Inc (Parsons)

POSTED

about 12 hours ago

DEADLINE

More opportunities from Florida → Planning, Engineering and Construction

Same awarding agency

FIS-Access Controlled WorkThis contract pertains to mechanical, electrical, or piping work within the Federal Inspection Station, requiring strict compliance with Customs and Border Protection vetting procedures and secure access protocols. All work must be performed by personnel who have undergone and passed the necessary CBP background clearances and access authorizations, ensuring that all activities are conducted within highly controlled and sensitive federal environments. The work is classified as a subcontract under NAICS code 238220, indicating specialized trade contracting, and is governed by the stringent security and operational standards unique to federal inspection facilities. The solicitation is open for responses until September 1, 2026, and is managed by the Planning, Engineering and Construction agency under the Florida office. The exact location of performance is not specified, but all work must occur within the confines of the Federal Inspection Station, which implies potential constraints on scheduling, site access, and coordination with federal personnel. Contractors must be prepared to meet rigorous security and compliance requirements without exception, and only qualified firms with proven experience in federally secured environments should pursue this opportunity. No set-aside status has been designated, and the contract does not specify point of contact details or physical address, suggesting all communication and submissions will be handled through the designated online procurement portal.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Pipe and Equipment LabelingThe contract pertains to the installation of permanent pipe and equipment labels that meet ANSI A13.1 standards, ensuring consistent, standardized identification across all designated systems. These labels must incorporate color-coding and clear flow indicators to enhance safety, operational efficiency, and regulatory compliance within facility infrastructure. The work is intended for long-term durability and immediate visibility, supporting maintenance, emergency response, and daily operations by providing unambiguous guidance on pipe contents and direction of flow. This is a subcontract solicitation posted on August 2, 2026, with a response deadline of September 1, 2026. It is classified under NAICS code 323111, indicating the work falls under commercial printing services, suggesting the labeling process may involve specialized printing, substrate application, and adhesive technologies suited for industrial environments. The project is managed by the Planning, Engineering and Construction division in Florida, though specific location details and point of contact information are not provided. All work is expected to comply with federal safety and labeling requirements and must be executed to ensure seamless integration into existing systems without disruption.

Commercial Printing (except Screen and Books)

POSTED

DEADLINE

Operation & Maintenance (O&M) Manual DevelopmentThe contract pertains to the development of Operation and Maintenance manuals as part of a subcontract for project closeout, requiring the compilation of comprehensive technical documentation including equipment specifications, manufacturer warranties, and detailed maintenance schedules. This effort is essential for ensuring long-term operational efficiency and compliance with post-construction requirements, with the work tied to infrastructure or construction project closeout procedures under the NAICS code 541620, which classifies it as environmental and other technical consulting services. The solicitation was posted on August 2, 2026, and responses are due by September 1, 2026, with the contracting entity identified as Planning, Engineering and Construction under the state of Florida, though specific location details and point of contact information are not provided. The work must be completed to meet organizational standards for deliverables, though no set-aside provisions or funding details are specified in the available data.

Environmental Consulting Services

POSTED

DEADLINE

Welding Services and CertificationThe contract encompasses specialized welding services for piping systems and structural supports, requiring full compliance with certified welding procedures and documentation. Contractors must develop and qualify Welding Procedure Specifications (WPS) and provide complete test reporting that meets industry certification standards, ensuring all welds are performed by qualified personnel and verified through approved testing protocols. The work is focused on precision and regulatory adherence, with deliverables centered on documented compliance and performance validation. The solicitation is classified as a subcontract under NAICS code 332439 and is managed by the Florida office of the Planning, Engineering and Construction agency. Responses are due by September 1, 2026, and the effort will be performed without a specified geographic location, though performance is expected to align with Florida-based project requirements. No set-aside provisions are in place, and the opportunity is open to qualified subcontractors with demonstrated expertise in high-integrity welding applications. The official portal for additional information and submissions is accessible via the provided link.

Other Metal Container Manufacturing

POSTED

DEADLINE

Seismic Restraint Fabrication and TestingThe contract entails the design, fabrication, and installation of seismic restraints for mechanical and electrical systems, with a strong emphasis on ensuring full compliance with applicable building codes and safety standards. Contractors are required to deliver fully engineered solutions that mitigate seismic risks, including the submission of detailed test data to verify performance under simulated seismic conditions. All work must meet rigorous engineering specifications and be documented to demonstrate adherence to industry-recognized protocols for structural integrity and system resilience. The solicitation is classified as a subcontract under NAICS code 332312, pertaining to metal framing and seismic restraint manufacturing, and is managed by the Florida office of Planning, Engineering and Construction. The opportunity was posted on August 2, 2026, with responses due by September 1, 2026, at 4:00 PM. While no set-aside designation or specific place of performance is indicated, the scope implies work will be performed at state-funded or regulated facilities within Florida. The contract demands technical precision, complete documentation, and verification of compliance without reliance on external citations or assumptions.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Mechanical Piping System InstallationThe contract calls for the fabrication, installation, and testing of mechanical piping systems comprising chilled water, condenser water, and process piping, with all components requiring seismic restraints to ensure structural integrity under dynamic loads. Hydrostatic testing is mandated to verify system integrity, leak resistance, and operational safety prior to commissioning. The work is classified under NAICS code 238220, indicating it falls within the plumbing, heating, and air-conditioning contracting sector, and is issued as a subcontract under the agency name Planning, Engineering and Construction, with Florida designated as the performing jurisdiction. The solicitation was posted on August 2, 2026, and responses are due by September 1, 2026, with no set-aside provisions specified. All work must comply with applicable codes and standards, and performance is expected to occur within the state of Florida, though specific city or address details are not provided.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Hyatt Lobby Renovation (V-1056 )

Solicitation # 25-769-IFB

The project involves a comprehensive interior renovation of the Hyatt Regency Hotel located at 9300 Jeff Fuqua Blvd in Orlando, Florida, within MCO’s Terminals A and B, focusing on the first and third floor elevator lobbies and the fourth floor lobby, including the bar, meeting rooms, concourse ballrooms, and restrooms. The scope encompasses the complete refinishing of all interior surfaces with new wall coverings, flooring, ceilings, lighting, millwork, decorative metalwork, and paint, alongside the construction of a new market-style grab-and-go retail space to enhance guest convenience and modernize the hotel’s offerings. This renovation aims to significantly elevate the guest experience through a full upgrade of the hotel’s public areas, transforming them into contemporary, high-quality environments. The solicitation, identified as V-1056 with solicitation number 25-769-IFB, was posted on August 2, 2026, with a response deadline of September 1, 2026. It is managed by the Florida agency under Planning, Engineering and Construction, with the place of performance centered in Orlando. Primary contact for project inquiries is Michael Yebba, Project Manager, reachable at 407-750-7529 or michael.yebba@goaa.org, while Kendrick Dandridge, Manager of Procurement for Capital Programs, serves as the secondary contact at 407-697-9982 or kendrick.dandridge@goaa.org. The contract is issued under a state and local government entity framework with no specific set-aside classification indicated.

Commercial and Institutional Building Construction

POSTED

DEADLINE

Airline Operations Integration & Stakeholder Liaison SupportThe contract requires technical representation to ensure airline operational needs are fully integrated into capital projects at Orlando International Airport, acting as the critical liaison between airlines and project teams overseeing automated people mover systems, baggage handling systems, and terminal infrastructure upgrades. The role demands deep understanding of airline workflows and seamless coordination to align engineering and construction efforts with real-time operational requirements, minimizing disruptions and maximizing efficiency during and after project implementation. The position is structured as a subcontract under NAICS code 541690, with a response deadline of August 12, 2026, and is managed by Florida’s Planning, Engineering and Construction division. Although specific location details are not provided, performance is expected to occur at Orlando International Airport, requiring on-site presence and continuous collaboration with airline representatives, project managers, and technical staff. The scope emphasizes proactive communication, adaptive problem solving, and the ability to translate complex operational demands into actionable project directives across multiple high-stakes construction initiatives.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Airline Technical Representative

Solicitation # 26-581-ITN

The Airline Technical Representative position is being solicited by the Florida Department of Planning, Engineering and Construction for Orlando International Airport to ensure seamless integration of airline operational needs into major capital improvement projects including APM replacement, baggage system upgrades, terminal optimization, and master plan updates. With passenger volumes rising and technology advancing rapidly, the airport requires a dedicated representative to serve as the critical liaison between multiple airline stakeholders and project teams, ensuring that design, construction, and activation phases align with real-world airline operations. The role demands proactive engagement, strong consensus-building across diverse airline interests, and expertise in complex aviation systems to prevent operational disruptions, avoid costly delays, and maintain a high standard of passenger experience throughout multi-year development initiatives. The position requires deep understanding of airport infrastructure, aviation logistics, and stakeholder management in a high-stakes, fast-paced environment where technical complexity, tight timelines, and budget constraints intersect with the critical need for operational continuity. Although specific contract clauses, delivery schedules, evaluation criteria, pricing, and technical specifications are not provided in the available documentation, the emphasis on communication, alignment, and readiness underscores the necessity of a highly skilled professional capable of navigating intricate stakeholder dynamics and translating airline requirements into actionable project inputs. The point of contact for this solicitation is John Bayley, Project Manager, with Kerry Gray-Brown as the Senior Procurement Agent, and responses are due by August 12, 2026, with the work to be performed at Orlando International Airport in Florida.

Engineering Services

POSTED

DEADLINE