Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Electronics Console & Control Unit Fabrication

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the fabrication and assembly of electronics housing and internal modules for torpedo countermeasure projects under the Naval Undersea Warfare Center Division Keyport. The scope of work focuses on build-to-print manufacturing for the Common Control Unit and Electronics Console, encompassing the production of signal generator drawers, HVDC supplies, dry amplifiers, fan trays, pedestals, and frames. The project requires expertise in precision sheet metal fabrication and electronic rack integration to deliver completed assemblies. To be eligible, the provider must maintain compliance with NIST SP 800-171 and DLA JCP standards. Performance of the contract is centered in Chesapeake, falling under NAICS code 334413.

General Info

Fabricate and assemble electronics housing and modules for Naval torpedo countermeasure projects.

Agency

Department Of Defense → Naval Undersea Warfare CenterView Agency

NAICS

334413 - Semiconductor and Related Device ManufacturingView NAICS

Place of Performance

Chesapeake, VA, USA

Set-Aside

NONE

Documents

This scope was carved out of N0025325R7004.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

AN/SLQ-25E “NIXIE” Follow-on Contract - Notice

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 21

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Naval Undersea Warfare Center

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Naval Undersea Warfare Center

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabricates and assembles electronics housing and internal modules for prime contractors on NUWC Division Keyport torpedo countermeasure projects. Performs build-to-print manufacturing of the Common Control Unit and Electronics Console, including Dry Amplifier, HVDC Supply, Signal Generator drawers, fan trays, pedestals, and frames. Requires precision sheet metal fabrication and electronic rack integration. Must comply with NIST SP 800-171 and DLA JCP. Delivers completed assemblies.

Similar Contracts

Same NAICS industry code

DISPLAY TOUCH SCRN

Solicitation # N0010426QJC40

This solicitation is for the repair of a display touch screen for the Department of Defense, managed by Navsup Weapon Systems Support Mech. The government requires a Repair Turnaround Time of 78 days, measured from the physical receipt of the asset to final government acceptance. The contract is a bilateral agreement requiring a signed acceptance from the contractor and specifies that all freight is FOB Origin, with shipping handled by the Navy via the Commercial Asset Visibility system. Key requirements include Government Source Inspection and adherence to MIL-STD-130 for marking and MIL-STD 2073 for packaging. Contractors must provide pricing for the repair, the turnaround time, and a potential price reduction amount per unit for any unexcusable delays. The government also requests the price and lead time for a new unit to compare against repair costs and may exercise an option to increase the quantity of supplies within 365 days of the award.

Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

ELECTRONIC MODULE,S

Solicitation # N0010426QNF25

This solicitation is issued by the Navsup Weapon Systems Support Mech for the repair of electronic modules, specifically referencing part 60176-270 from CAGE code 0ZAP8. The contract is a fixed-price agreement that requires the contractor to perform a teardown and evaluation within 90 days of receiving the carcass to provide a firm-fixed-price quote. A requested repair turn around time of 77.562 days is established, and failure to meet this timeline will result in a per-unit price reduction. The agreement includes a one-year warranty from the date of delivery and an option for increased quantity available for 365 days after the award. The contractor must adhere to strict quality and safety standards, including MIL-STD-130 for marking, ANSI/ESD S20.20 for electrostatic discharge control, and a total prohibition of metallic mercury contamination. All work must be performed according to original manufacturer specifications and drawings. Offerors who are not the original equipment manufacturer must provide a signed letter of authorization. The contract is certified for national defense under the Defense Priorities and Allocations System and requires bilateral written acceptance prior to execution.

Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

in about 1 month

59--PANEL,COLOR ENTRY, IN REPAIR/MODIFICATION OF

Solicitation # N0010426QDB92

This solicitation, issued by the Navsup Weapon Systems Support Mech, seeks a contractor for the repair of the Color Entry Panel. The contract requires the repair to meet specific operational and functional requirements associated with CAGE code 11263 and reference number 60319-1. All work must adhere to the contractor's standard repair practices and approved government documents, with physical identification following MIL-STD-130. Key contractual requirements include the provision of a Repair Turnaround Time (RTAT), which is measured from the physical receipt of the asset at the contractor's facility to the date of government acceptance. The contractor is responsible for all inspection and testing according to original manufacturer specifications and must maintain inspection records for 365 days following final delivery. The award will be issued bilaterally and requires written acceptance from the contractor. Additionally, the solicitation is restricted to authorized distributors of the original manufacturer, who must provide proof of authorization on company letterhead.

Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Supply of NSN 6150-01-316-8829 ComponentsThis subcontract with the Department of Defense ASC Commodities Division involves the supply of 17 units of NSN 6150-01-316-8829 for prime contractors. The provider is responsible for manufacturing or sourcing parts that strictly conform to Reference Drawings 19207 12311907 Rev D, 19200 11831216 Rev C, and 19200 12287273 Rev V. All components must be packaged according to MIL-STD-2073-1E and MIL-STD-129 standards, adhering to specific coil and bag requirements. Delivery of the 17 units is set as FOB Origin, with performance taking place in Anniston, Alabama. The opportunity is categorized under NAICS code 334413.

ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

Supply of Source-Controlled Digital Microcircuits (NSN 5962013015914)This subcontract involves the supply of five units of source-controlled digital microcircuits, specifically part number CT1995-20 under NSN 5962013015914, for prime contractors supporting the Defense Logistics Agency. The manufacturer must adhere to source-controlled drawings and Limited Rights Data, ensuring all items are packaged according to MIL-STD-2073-1E and MIL-STD-129 standards. Compliance with 252.204-7016 is required, and the provider must submit DLA L&M Form 918 along with full traceability documentation as specified in DLAD Procurement Note C03. The contract is designated as a Total Small Business Set-Aside under NAICS code 334413 and is managed by the Active Devices Division of the Department of Defense. Performance for this requirement is centered in Columbus, Ohio. Interested parties must respond by September 24, 2026, to meet the procurement timeline established by the agency.

ACTIVE DEVICES DIVISION

POSTED

about 24 hours ago

DEADLINE

Connector Assembly (NSN 2840010362927) Supplier

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 24 hours ago

DEADLINE

Supplier of Electrical Connector Cover (MS27502A17A)

ACTIVE DEVICES DIVISION

POSTED

about 24 hours ago

DEADLINE

Linear Microcircuit Supplier (NSN 5962010834317)This subcontract for the Active Devices Division of the Department of Defense involves the supply of high-reliability linear microcircuits under NSN 5962010834317. The selected supplier must provide components that conform to MIL-M-38510/101K and MIL-PRF-38535M standards, sourced from approved manufacturers. Key requirements include strict supply chain traceability in accordance with DLAD Procurement Note C03 and attribute identification following IPC/JEDEC J-STD-609. The contract requires a CMMC Level 2 self-assessment for security compliance. The final deliverables consist of two microcircuits and all associated traceability documentation. Performance will take place in Columbus, Ohio, with a response deadline of October 1, 2026.

ACTIVE DEVICES DIVISION

POSTED

about 24 hours ago

DEADLINE

MICROCIRCUIT, DIGITAL

Solicitation # SPE7M5-26-T-515J

Solicitation SPE7M5-26-T-515J is a fixed-price request for quotations issued by DLA Land and Maritime for the procurement of six digital microcircuits, identified by NSN 5962012874338. The acquisition is conducted under full and open competition with a need ship date of March 9, 2027, and an original required delivery date of July 1, 2027. Delivery is FOB Origin to the Storage and Distribution Detachment in Columbus, Ohio, with inspection and acceptance occurring at the destination. The contract imposes stringent quality and traceability requirements, including the mandatory use of DLA Land and Maritime Form 918. Contractors must provide unredacted traceability or test reports to the contract administrator for written authorization prior to shipping. Technical compliance is governed by MIL-PRF-38535M and MIL-M-38510/312C, and the item is subject to Qualified Manufacturers List and Qualified Suppliers List of Distributors requirements. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, specifically requiring DOD qualified ESD and EMI protective materials per MIL-PRF-81705 to prevent lead damage. Additional compliance mandates include a CMMC Level 2 self-assessment, adherence to the Buy American and Balance of Payments Program, and strict prohibitions against the intentional addition of mercury. Payment processing is managed through the Wide Area WorkFlow system. All quotes must be submitted via the DLA Internet Bid Board System by the specified deadline.

ACTIVE DEVICES DIVISION

POSTED

about 24 hours ago

DEADLINE

HEATER, THERMAL RELEASE

Solicitation # SPE7M1-26-U-6546

MARITIME SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

CONTACT, ELECTRICAL

Solicitation # SPE7M5-26-T-470U

Solicitation SPE7M5-26-T-470U, issued by the DLA Land and Maritime Active Devices Division, is a procurement for seven electrical contacts under NSN 5999-01-359-2026. This is a qualified item procurement requiring compliance with the Qualified Products List for Federal Stock Class 5935 connector assemblies and contacts. The items must adhere to Technical Data Package Rev A Gen 1, specifically Basic Non Government Standard SAE AS39029E Revision E and Reference Non Government Standard SAE AS39029/88 Revision C. The delivery requirement is 168 days after receipt of order, with a need ship date of March 9, 2027, and an original required delivery date of June 22, 2027. The contract specifies destination inspection and acceptance. Packaging must follow DLA packaging requirements for procurement and MIL-STD-129 for marking and labeling. Non-hazardous materials should be commercially packaged per ASTM D3951, while hazardous materials must comply with TQ requirement IP025 and the Hazard Communication Standard. Shipping is handled under the First Destination Transportation program to the DLA Distribution New Cumberland facility in Pennsylvania. Payment and invoicing are to be processed electronically through the Wide Area WorkFlow system. The procurement is categorized under NAICS code 334413 and incorporates various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information.

ACTIVE DEVICES DIVISION

POSTED

about 24 hours ago

DEADLINE

MICROCIRCUIT, LINEAR

Solicitation # SPE7M5-26-T-516Z

ACTIVE DEVICES DIVISION

POSTED

about 24 hours ago

DEADLINE

More opportunities from Department Of Defense → Naval Undersea Warfare Center

Same awarding agency

Fiber Optic Tow Cable AssemblyThis subcontract involves the supply and assembly of specialized fiber optic tow cable assemblies for prime contractors supporting Naval Undersea Warfare Center Division Keyport torpedo countermeasure projects. The manufacturer is responsible for producing cables that integrate fiber optic cabling, armored sheathing, and waterproof connectors to maintain signal integrity and structural durability during underwater deployment. The project requires strict adherence to BTP Level 3 TDP and established fiber optic performance standards. Performance will take place in Chesapeake, and the final deliverable is the completed Tow Cable Assembly under NAICS code 335921.

Fiber Optic Cable Manufacturing

POSTED

DEADLINE

Towed Body & Acoustic Projector FabricationThis subcontract with the Naval Undersea Warfare Center involves the manufacture of underwater towed acoustic projectors and structural housings for torpedo countermeasure projects. The scope of work includes the fabrication of the Towed Body, specifically the nose cone, acoustic section, electrical section, and tail cone assemblies. These components must be constructed using pressure-resistant housings, acoustic transducer materials, and underwater-rated seals to ensure operational integrity. The contractor is required to adhere to BTP Level 3 TDP and strict underwater pressure specifications to deliver a completed Towed Body assembly. This project falls under NAICS code 336611 and is performed in Chesapeake, supporting prime contractors on NUWC Division Keyport initiatives.

Ship Building and Repairing

POSTED

DEADLINE

Winch & Deck Handling Equipment ManufacturingThis subcontract involves the manufacturing of mechanical deployment systems for prime contractors supporting Naval Undersea Warfare Center Division Keyport torpedo countermeasure projects. The scope of work includes the fabrication and assembly of the Winch Assembly, Top Hat, Slip Ring, and associated Deck Handling Equipment, utilizing heavy-duty machining and cable winding mechanisms. All production must strictly adhere to BTP Level 3 TDP and Factory Acceptance Test protocols to ensure technical compliance. The final deliverable consists of fully assembled winch and deck handling hardware, with performance taking place in Chesapeake.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

Systems Engineering & Technical (E&T) ServicesThis subcontract for Systems Engineering and Technical Services supports the Naval Undersea Warfare Center Division Keyport on torpedo countermeasure projects. The scope of work involves providing technical documentation, safety planning, and quality validation for prime contractors, specifically focusing on the development and execution of Factory Acceptance Test plans, System Safety Program Plans, Life Cycle Sustainment Plans, and DMSMS plans. The contractor is responsible for delivering technical design packages and comprehensive reports while utilizing engineering analysis software. Strict adherence to NIST SP 800-171 and NISPOM security standards is required. The performance of these services is centered in Chesapeake, falling under NAICS code 541330.

Engineering Services

POSTED

DEADLINE

AN/SLQ-25E “NIXIE” Follow-on Contract - Notice

Solicitation # N0025325R7004

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

DMISA Ring Test and Inspection ServicesThis subcontract for the Naval Undersea Warfare Center involves the technical testing and inspection of refurbished DMISA rings for prime contractors on NAVSEA projects. The selected provider will be responsible for identifying items by NSN and serial number, executing specific test parameters, and verifying performance requirements through the use of environmental chambers and precision measurement equipment. All results must be formally signed and authenticated, culminating in the delivery of a comprehensive Test/Inspection Report as specified in CDRL A001. The project is based in Keyport, Washington, and falls under NAICS code 541380. Due to the nature of data transmission requirements, the contractor must maintain CMMC Level 2 certification. The solicitation was posted on September 18, 2026, with a response deadline of October 19, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Specialized Magnet Supply for DMISA RingsThis subcontract through the Naval Undersea Warfare Center involves the supply of high-precision magnets used in NAVSEA torque motor magnetic field ring assemblies. The contractor is responsible for manufacturing magnets that meet strict technical specifications for both Azimuth and Elevation rings using high-grade materials. All deliverables must be tracked by lot and serial number to ensure quality and traceability. The contract requires full certification of Trade Agreements Act compliance, ensuring materials originate from the United States or a designated country. Performance for this requirement is based in Keyport, Washington, under NAICS code 327390. The response deadline for this opportunity is October 19, 2026.

Other Concrete Product Manufacturing

POSTED

DEADLINE

DMISA Ring Refurbishment and Magnet InstallationThis subcontract for the Naval Undersea Warfare Center involves the refurbishment of torque motor magnetic field ring assemblies for NAVSEA projects. The scope of work includes removing existing magnets from government-furnished rings, cleaning and preparing surfaces, and installing new magnets into various plated steel and stainless steel azimuth and elevation ring configurations. Due to the precision required for magnet removal and installation, the use of specialized tools is mandatory. The project is based in Keyport, Washington, and requires strict adherence to CMMC Level 2 and NISPOM standards. The final deliverable consists of refurbished and repopulated DMISA ring assemblies. Interested parties must respond by October 19, 2026, under NAICS code 332710.

POSTED

DEADLINE

Refurbishment of Torque Motor Magnetic Field Ring Assemblies

Solicitation # N0025326R7006

Solicitation N0025326R7006, issued by the Naval Undersea Warfare Center Division Keyport, is an Indefinite-Delivery Indefinite-Quantity procurement for the refurbishment and repopulation of Torque Motor Magnetic Field Ring Assemblies (DMISA rings). The scope of work involves the depopulation of existing magnets and the installation of new magnets for four variations of rings: plated steel azimuth, stainless steel azimuth, plated steel elevation, and stainless steel elevation. The contractor is responsible for grinding items to meet final dimensions and performing all required tests and inspections in accordance with NAVSEA Drawings 7447999 Rev I and 7448000 Rev F. The government has established a maximum order quantity of 2,540 units, with specific delivery requirements of 180 calendar days after receipt of government furnished property. The contract will be awarded to a single offeror using the Lowest Price Technically Acceptable (LPTA) source selection process. To be considered, offerors must be rated acceptable in technical capability, quality management systems (ISO 9001:2015 or equivalent), risk management, and past performance. Key deliverables include a Test and Inspection Data Sheet (CDRL A001) with every delivery and adherence to strict packaging and marking standards, including magnetic content labeling and MIL-STD-130 unique identification. Access to controlled technical drawings requires validated JCP and CMMC certifications. Invoicing is managed through the Wide Area WorkFlow (WAWF) system, and inspection and acceptance are performed by the government at the destination in Keyport, Washington.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

Building 514 Crane Rail Cross Bracing Installation

Solicitation # N0025326Q0008

The Naval Undersea Warfare Center Division Keyport is soliciting quotes for the installation of crane rail cross bracing at Building 514 in Keyport, Washington. This requirement, issued as RFQ N0025326Q0008, is a 100% small business set-aside under NAICS code 333923. The scope of work involves relocating high-pressure air and electrical lines, welding new gussets and plate stiffeners, installing bolted cross bracing and web stiffeners at six specific columns, and performing a crane rail survey. The contractor is also responsible for preparing, priming, and painting all exposed steel to match existing finishes. All work must comply with EM-385-1-1 safety standards, UFC 1-200-01 building codes, and NAVFAC P307 weight handling guidelines. The government will award the contract based on a Lowest Price Technically Acceptable (LPTA) source selection process. Technical evaluation focuses on the offeror's capability, requiring at least three years of experience in commercial or industrial applications, a certified Site Safety and Health Officer, and an acceptable past performance record. Safety risk is evaluated using a five-year history of OSHA DART and Total Recordable Case rates. Proposals must be submitted electronically and include a cover letter, SF 1442, and a letter of bondability. Bid bonds are required for proposals of $150,000 or more. Invoicing must be processed through the Wide Area Workflow (WAWF) system.

Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

DEADLINE

Hazardous/Industrial Waste Disposal ContractorThis subcontract opportunity is for a Hazardous and Industrial Waste Disposal Contractor to support prime contractors at the Naval Undersea Warfare Center Division facility in Keyport, Washington. The selected contractor will be responsible for the removal, collection, and legal disposal of degraded insulation and industrial waste from Building 98, ensuring all activities comply with federal, state, and local environmental regulations. Key deliverables include the provision of disposal manifests and certificates of destruction. The project is designated as a total Small Business Set Aside under NAICS code 562111. Qualified bidders must possess valid waste hauling and disposal permits to be eligible. The solicitation was posted on September 17, 2026, with a response deadline of September 24, 2026.

Solid Waste Collection

POSTED

DEADLINE

Specialized Cryogenic Insulation SupplierThis subcontract, designated as a total Small Business Set Aside, involves the supply of specialized cryogenic insulation materials for projects at the Naval Undersea Warfare Center Division Keyport facility. The supplier is responsible for providing three-inch thick urethane insulation, Mylar vapor barriers, white aluminum outer jackets, and all necessary mounting hardware. All materials must adhere to strict performance standards to effectively prevent frost and condensation on liquid nitrogen systems. The contractor is required to deliver all specified materials and hardware directly to the site or the prime contractor. This opportunity falls under NAICS code 326199 and is managed under the Department of Defense. The response deadline for this requirement is September 24, 2026.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS