Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Elevator Supply and Installation

Active

Federal

Response Deadline09/08/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the complete removal of the existing elevator and the installation of a new non-proprietary hydraulic, holeless, roped, single jack cantilever passenger elevator with a 4,500-pound capacity, fully compliant with ANSI A17.1-2016 standards. The project requires a turnkey solution that ensures seamless integration into the existing structure without the need for a machine room or pit excavation, emphasizing efficiency and safety in both construction and future operations. The elevator must be designed to provide reliable, code-compliant service while meeting all federal accessibility and operational requirements for a federal facility. This is a small business set-aside subcontract under NAICS code 333922, issued by the Department of Defense through the W6QM Micc-Ft Leavenworth office. The place of performance is Fort Leavenworth, Kansas, with a ZIP code of 66027. The solicitation was posted on August 7, 2026, and responses are due by September 8, 2026, at 7:00 p.m. The contract does not specify a solicitation number but is accessible via the SAM.gov portal, and all work must be completed in alignment with federal procurement regulations and defense installation requirements.

General Info

Remove old elevator, install new 4,500-lb holeless hydraulic passenger elevator at Fort Leavenworth, Kansas, compliant with federal standards.

Agency

Department Of Defense → W6QM Micc-Ft LeavenworthView Agency

NAICS

333922 - Conveyor and Conveying Equipment ManufacturingView NAICS

Place of Performance

Fort Leavenworth, KS, 66027, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 7

subcontract

Response DeadlineSep 8

Submission deadline

Response Deadline

09/08/2026, 07:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QM Micc-Ft Leavenworth

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W6QM Micc-Ft Leavenworth

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Complete removal of existing elevator and installation of a new non-proprietary hydraulic, holeless, roped, single jack cantilever passenger elevator with 4,500-lb capacity and compliance with ANSI A17.1-2016.

Similar Contracts

Same NAICS industry code

Supply of Non-Proprietary Elevator ComponentsThe contract is for the supply of all non-proprietary elevator components including hydraulic jacks, pumps, control systems, doors, and cabs, with a mandatory requirement that all parts comply with open standards to ensure long-term maintainability and compatibility with future upgrades. This subcontract is set aside exclusively for small businesses under the SBA’s Total Small Business Set Aside designation and falls under NAICS code 333922, indicating it pertains to other industrial machinery manufacturing. The solicitation was posted on August 7, 2026, with a response deadline of September 8, 2026, at 7:00 PM. Performance of the contract will be based at Fort Leavenworth, Kansas, with a ZIP code of 66027. The contracting agency is the Department of Defense, specifically under the W6QM Micc-Ft Leavenworth office.

W6QM Micc-Ft Leavenworth

POSTED

DEADLINE

in about 1 month

Elevator System Modernization & Code ComplianceThe contract titled Elevator System Modernization & Code Compliance requires the full modernization of an existing elevator system to comply with ASME A17.1 safety standards, encompassing the replacement or refurbishment of critical components such as the elevator car, hoisting cables, motor, lighting, electrical systems, and control processors. The work must ensure the system meets current federal safety requirements and operates reliably for long-term use, with all upgrades performed to industry-best practices and documented to confirm compliance. The project is designated as a Small Business Set Aside under NAICS code 333922, reserved exclusively for small businesses, and is being managed by the Department of Defense through its W075 Endist Sacramento office, with the work to be performed at a location in Orland, California, with a ZIP code of 95963. The solicitation was posted on August 7, 2026, and proposals must be submitted no later than September 9, 2026, at 5:00 p.m. local time. This subcontract opportunity is exclusive to eligible small businesses and carries the expectation of complete system overhaul rather than partial repairs or maintenance.

W075 Endist Sacramento

POSTED

DEADLINE

in about 1 month

Ebbing ANGB, Arkansas Storage Aid System

Solicitation # FA860426RB022

The U.S. Air Force is seeking commercial products or services through a combined synopsis and solicitation for a Storage Aid System at Ebbing Air National Guard Base in Arkansas, identified by solicitation number FA860426RB022. This acquisition is exclusively set aside for small business concerns under the Small Business Administration’s Total Small Business Set-Aside provisions, with the NAICS code 333922 indicating a focus on industrial machinery manufacturing. The requirement includes 14 contract line item numbers and has a performance period of 230 days from award, with all technical specifications and required line items detailed within the solicitation document. The solicitation does not include a separate written request, and all provisions and clauses are incorporated by reference, accessible through the official acquisition website. Proposals must be submitted by the deadline of August 10, 2026, with the solicitation posted on July 2, 2026. The contracting office is located at Wright-Patterson Air Force Base in Ohio, under the Department of Defense, and is managed by the FA8604 Aflcmc Pzi office. Primary point of contact is Jennifer Jensen, reachable via email and phone, with Maggie Seid serving as the secondary contact. The place of performance is listed with a ZIP code of 72903, corresponding to the location of Ebbing ANGB in Arkansas. All offers must be submitted electronically through the SAM.gov portal, and no paper submissions will be accepted. The procurement is conducted under FAR Part 12 procedures for commercial items, emphasizing streamlined acquisition processes suited for commercial off-the-shelf solutions.

FA8604 Aflcmc Pzi

POSTED

DEADLINE

Storage Aid System Vandenberg SFB, CA

Solicitation # FA860426RB023

The U.S. Air Force is seeking commercial products or services through a combined synopsis and solicitation for a Storage Aid System to be delivered to Vandenberg Space Force Base in California under solicitation number FA860426RB023. This acquisition is exclusively set aside for small business concerns as defined by the Small Business Administration, and the solicitation is issued under FAR Part 12 procedures, meaning no separate written request will be distributed. The requirement includes 11 contract line item numbers with a total performance period of 300 days from the award date. The NAICS code 333922 applies to this procurement, identifying it within the industrial classification for other industrial machinery and equipment manufacturing. All provisions and clauses are incorporated by reference and are accessible via the official acquisition website. The solicitation was posted on July 7, 2026, with proposals due by August 13, 2026, at 7:00 PM EST. The contract will be managed by the Air Force Life Cycle Management Center based at Wright-Patterson Air Force Base, Ohio, with primary point of contact Jennifer Jensen and secondary contact Maggie Seid available for inquiries.

FA8604 Aflcmc Pzi

POSTED

DEADLINE

Storage Aid System - Randolph AFB, Texas

Solicitation # FA860426QB004

The contract pertains to the procurement of a Storage Aid System for Randolph Air Force Base in Texas under solicitation number FA860426QB004, which is issued as a combined synopsis and solicitation for commercial products or services in accordance with FAR Part 12. This is a total small business set-aside, meaning only certified small business concerns are eligible to respond, with the NAICS code 333922 identifying the industry as Other Commercial and Industrial Machinery and Equipment Manufacturing. The requirement consists of 13 line items with a 240-day period of performance, and all provisions and clauses are incorporated by reference and available electronically at www.acquisition.gov. The response deadline has been extended to August 3, 2026, at 3 PM EST, with the official submission deadline listed as 8:00 PM EST. The contract is managed by the Department of Defense through the agency office FA8604 Aflcmc Pzi located at Wright-Patterson Air Force Base, Ohio, with primary point of contact Jennifer Jensen and secondary contact Brent Otten. The place of performance is identified with a zip code of 78150, corresponding to the location of Randolph AFB, Texas.

FA8604 Aflcmc Pzi

POSTED

DEADLINE

Conveyor Roller Manufacturing and SupplyThe contract entails the manufacture and supply of 107 conveyor rollers identified by NSN 3910015389597, with strict adherence to military specifications, labeling, and packaging requirements to ensure full compliance with DoD standards. This is a subcontract awarded under a Total Small Business Set-Aside, meaning only small businesses qualify to respond, as defined by the SBA and FAR 19.5, and is classified under NAICS code 333922 for other commercial and service machinery manufacturing. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and the performance location is designated as Tracy, California, with a ZIP code of 95304-5000. The contracting agency is the Department of Defense under the Construction & Equipment Manu & Con organizational structure, and all work must meet the technical, quality, and delivery expectations outlined for military-grade equipment.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Supply of Pallet Stackers (NSN: 3990014775074)The contract seeks the procurement and delivery of three pallet stackers identified by NSN 3990014775074 under a total small business set-aside, targeting eligible small businesses as defined by the SBA under FAR 19.5. The effort falls under NAICS code 333922, indicating a focus on other material handling equipment manufacturing, and is managed by the Department of Defense through its Construction & Equipment Manu & Con office. All delivered units must fully comply with federal supply chain standards, including proper labeling, hazardous materials reporting, and mandatory cybersecurity protocols required of defense contractors. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and all work must be completed and delivered by the deadline of August 17, 2026. The solicitation was posted on August 5, 2026, and submitted responses must meet all technical, regulatory, and compliance obligations outlined for defense-related equipment procurement.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

ROLLER, CONVEYOR

Solicitation # SPE8EF-26-T-1584

The contract pertains to the procurement of 107 units of a roller conveyor identified by NSN 3910-01-538-9597 under solicitation SPE8EF-26-T-1584, with a total small business set-aside classification and a NAICS code of 333922. The delivery is scheduled for 167 days after award, and responses are due by August 17, 2026. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting any disclosure to foreign persons regardless of location without prior authorization from the Department of State or Department of Commerce; DFARS 252.225-7048 governs handling. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, who have completed mandatory DOD export control training and DLA questionnaire requirements. Cybersecurity requirements mandate CMMC Level 2 certification by a certified third-party assessment organization, and covered defense information protocols apply. The contract is managed by the Department of Defense through the Construction & Equipment Manu & Con agency, with performance located in Tracy, California, and primary point of contact Russell Keiser reachable via email and phone.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

STACKER, PALLET

Solicitation # SPE8EF-26-T-1558

The contract pertains to the procurement of three pallet stackers identified by NSN 3990014775074 and part number 60157-001 from AAR Manufacturing Inc. under solicitation SPE8EF-26-T-1558, a total small business set-aside for NAICS code 333922. Delivery is required FOB origin within 167 days from the award date, with no variance allowed in quantity and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 with all DLA Master List of Technical and Quality Requirements taking precedence, and all items must be marked and labeled per MIL-STD-129. Palleted shipments exceeding 20 cubic feet, 52 inches in length, 54 inches in height, or 3,000 pounds must be skidded for material handling equipment, in accordance with DLA Packaging Requirements. Each unit is to be packaged with a quantity per unit pack of one. The delivery address is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, and transportation instructions must follow DLAD Proc Note C19 for general shipping and C20 for first destination. The original required delivery date was January 6, 2027, with a need ship date of February 1, 2027. The unit price is $3.00 per item totaling $9.00 for the full order. Covered defense information may apply, and all technical and quality specifications referenced by R or I numbers are to be sourced from the DLA Master List.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

CYLINDER ASSY, ACTU,

Solicitation # SPE8EF-26-T-1576

The contract pertains to the procurement of a cylinder assembly actuator with NSN 1740-01-580-5136 and part number 40-15-0001, under solicitation SPE8EF-26-T-1576, issued by the Department of Defense through the Defense Logistics Agency. A total of thirteen units are required at a unit price of $13.00, with delivery mandated to occur within 44 days of contract award, FOB origin, and inspection and acceptance to take place at the destination. All supplies must adhere strictly to the DLA Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951, and packaging must comply with MIL-STD-129 and RP001 guidelines, including proper marking, labeling, and palletization. The item must be delivered to DLA Distribution Cherry Point at Phantom Rd, Building 147, Bay A, Cherry Point, NC 28533-5040, with a required ship date of October 1, 2026, and an original delivery deadline of December 16, 2026. The quantity variance is fixed at zero percent, and the unit of issue is each. Transportation instructions must follow DLA Procurement Notes C19 and C20, and the supply is subject to potential coverage under Covered Defense Information protocols. The solicitation was posted August 5, 2026, with responses due by August 17, 2026, and is classified under NAICS code 333922. All referenced technical requirements are controlled by the active revision of the DLA Master List as of the solicitation issue date, and any amendments supersede prior versions.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Installation, Commissioning, and Technical Support ServicesThe contract entails the on-site installation, calibration, and commissioning of the C-24 parts washing system at a facility in Edinburg, Texas, with a zip code of 78541. The scope includes comprehensive operator training to ensure proper usage and maintenance of the equipment, as well as ongoing post-installation technical support to address any issues that may arise after system activation. All services must be performed directly at the designated location, requiring the contractor to be physically present on-site to complete the work. The solicitation is designated as a Small Business Set Aside under the SBA program, specifically reserved for small businesses, and is classified under NAICS code 333922, which corresponds to industrial machinery manufacturing. The proposal submission deadline is August 12, 2026, and the opportunity was posted on August 5, 2026. The contracting entity is the Department of Agriculture, with performance taking place at their Edinburg, Texas, location.

Ppq Aeo Edinburg Tx

POSTED

DEADLINE

U.S. Senate Mail Processing Conveyor System

Solicitation # 2026-R-047

The United States Senate, Office of the Sergeant at Arms, is soliciting quotes for a replacement mail processing conveyor system under RFQ 2026-R-047. This solicitation requires vendors to submit complete proposals via email to acquisitions@saa.senate.gov with the exact subject line “ATTN: Charles Blalock, 2026-R-047” no later than 12:00pm ET on July 30, 2026. Late or improperly labeled submissions may be rejected, and early responses are encouraged. The system must meet specific operational and technical standards to ensure seamless integration with current Senate mail operations located at the Senate’s facility in Washington, DC, with a ZIP code of 20510. The project falls under NAICS code 333922, indicating it involves the manufacturing of other industrial machinery, and no set-aside provisions apply, meaning all eligible businesses may respond. The primary point of contact for technical and procurement inquiries is Charles Blalock, reachable at 202-841-3876 or charles_blalock@saa.senate.gov, with additional support available through the SAA Acquisitions team at acquisitions@saa.senate.gov. All proposals must be submitted electronically and adhere strictly to the instructions provided in the RFQ documentation. The contract is not subject to small business or other preference programs, and performance is expected to occur entirely at the Senate’s mail processing facility in Washington, DC. Vendors should ensure their quotes address all technical specifications, delivery timelines, installation requirements, and post-installation support as outlined in the solicitation materials. For further details, the official SAM.gov listing for this opportunity can be accessed via the provided uiLink.

Senate Sergeant At Arms

POSTED

DEADLINE

More opportunities from Department Of Defense → W6QM Micc-Ft Leavenworth

Same awarding agency

Elevator Commissioning and Quality ControlThe contract requires comprehensive third-party quality control, load testing, safety inspections, and full commissioning of a newly installed elevator system at Fort Leavenworth, ensuring all components meet rigorous safety and operational standards. The contractor must perform all testing and inspection activities in accordance with applicable codes and regulations, culminating in the submission of detailed test reports and official certifications to verify compliance and readiness for use. All work must be completed to support the Department of Defense’s operational requirements at the specified location. This is a Small Business Set Aside contract under NAICS code 541330, reserved exclusively for small businesses, with a response deadline of September 8, 2026. The solicitation was posted on August 7, 2026, and is managed by the W6QM Micc-Ft Leavenworth office under the Department of Defense. Performance is required at Fort Leavenworth with a zip code of 66027, and all deliverables must be submitted in a timely manner to satisfy contractual obligations, including documentation that confirms the elevator system is fully functional, safe, and certified for public or institutional use.

Engineering Services

POSTED

DEADLINE

in about 1 month

Electrical and Control Systems IntegrationThe contract pertains to the installation and integration of electrical systems, control panels, and safety circuits for a new elevator, requiring full compliance with the National Electrical Code and ANSI A17.1-2016 standards. All work must be performed at Fort Leavenworth, Kansas, with the zip code 66027 as the designated place of performance, ensuring that all technical specifications and safety protocols are met to support operational reliability and regulatory adherence. The project is structured as a subcontract under a Small Business Set Aside, indicating priority for qualified small businesses to respond, and is classified under NAICS code 238210 for electrical contractors. The solicitation was posted on August 7, 2026, with a response deadline of September 8, 2026, at 7:00 PM, allowing interested parties a limited window to prepare and submit proposals. The contracting agency is the Department of Defense, specifically under the W6QM Micc-Ft Leavenworth office, indicating this work supports federal infrastructure needs. While no point of contact is listed, all submissions must be made through the official SAM.gov portal linked in the contract details. The absence of a specified city or state for the agency’s office suggests centralized management, but the physical work must be completed on-site at the military installation in Fort Leavenworth.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

in about 1 month

Structural Demolition and Building ModificationsThe contract involves the demolition of existing elevator shaft supports and associated structural modifications within a historic building located at Fort Leavenworth, Kansas. Work includes patching, framing, and reinforcement efforts to ensure structural integrity following demolition, requiring specialized techniques to preserve the building's historic character while meeting modern safety and engineering standards. The project demands expertise in historic preservation and structural engineering, with all work to be performed in compliance with applicable codes and guidelines for protected structures. This is a Small Business Set Aside subcontract classified under NAICS code 238990, targeting small business contractors. The solicitation was posted on August 7, 2026, with responses due by September 8, 2026, and is managed by the Department of Defense through the W6QM Micc-Ft Leavenworth office. Performance is required at the specified location in Fort Leavenworth, zip code 66027, and the nature of the work necessitates experienced subcontractors capable of handling sensitive, mission-critical structural modifications in a historically significant environment.

All Other Specialty Trade Contractors

POSTED

DEADLINE

in about 1 month

Elevator Replacement Bldg. 246

Solicitation # W91QF426_Elevator

Building 246 will undergo a complete demolition and replacement of its existing MRL elevator system and all associated support structures, with record drawings from the most recent renovation and repairs provided as part of the solicitation. The new installation must feature a 100% non-proprietary hydraulic, holeless, roped, single jack, cantilever passenger elevator with a 4,500-pound capacity, ensuring that any qualified technician can perform future maintenance without reliance on proprietary components. The elevator will have three front openings with a travel distance of 24 feet 3 inches and operate at 100 feet per minute, fully compliant with ANSI A17.1-2016 standards. The solicitation, titled Elevator Replacement Bldg. 246 and identified by number W91QF426_Elevator, is a Small Business Set Aside under NAICS code 236220, issued by the Department of Defense through the Office of W6QM Micc-Ft Leavenworth in Kansas. Proposals must be submitted by September 8, 2026, with primary point of contact Felipe D. Zaragoza and secondary point of contact Jennifer S. Walker available for inquiries.

Commercial and Institutional Building Construction

POSTED

DEADLINE

in about 1 month

ACB Inmate Call Monitoring Software W91QF4-26-Q-A021

Solicitation # W91QF4-26-Q-A021

This contract is for a non-personal services Artificial Intelligence Platform-Based Inmate Call Monitoring System to be deployed across the Military Correctional Complex, including the USDB, MWJRCF, and NWJRCF, which collectively house over 650 inmates. The system must be AWS Cloud GOV certified and seamlessly integrate with the existing ViaPath Phone system to provide real-time monitoring of all non-privileged inmate communications, with the goal of enhancing staff and inmate safety by detecting, deterring, and investigating criminal and unauthorized activities. The AI platform must generate near real-time digital transcripts of phone calls, perform semantic and agentic analysis to identify suspicious language patterns, and detect evolving criminal terminology such as coded drug names or synonyms for violent acts. It must offer continuous 24/7 monitoring with immediate alerts for keyword matches, multi-language support with instant Spanish-to-English translation, and a web-based dashboard enabling comprehensive keyword searches in multiple combinations, audit trails, and link analysis. The software must analyze 100% of call volume with high transcription accuracy and provide actionable intelligence through daily Law Enforcement Assistance reports that detail incidents, trends, and operational insights, while supporting investigators and responding to emergency monitoring requests. The contractor is responsible for deploying a cloud-native solution, delivering comprehensive training via Microsoft Teams, providing ongoing technical support with certified personnel, and ensuring continuous platform improvements as part of the subscription without additional licensing fees. The contract includes an Account Manager and System Specialist to serve as the primary liaison with the Military Corrections Command and respond to technical issues. The solution must comply with stringent DoD cybersecurity and data handling requirements, including safeguarding Covered Defense Information under DFARS 252.204-7012 and adhering to NIST SP 800-171 controls. The contractor’s personnel require security vetting, must obtain installation access badges for Fort Leavenworth, and are subject to antiterrorism training and CMMC Level 1–3 compliance standards. All deliverables are subject to inspection and acceptance at Fort Leavenworth, Kansas, and the system must be fully operational by September 17, 2026. The contract is structured as a Firm-Fixed-Price, single-line item with a 12-month performance period payable in monthly increments, covering the maximum capacity of 650 inmates. Invoicing must be processed through Wide Area WorkFlow, and all military property must be marked per MIL-STD-130 with Data Matrix UID tags and

Software Publishers

POSTED

DEADLINE

Amendment 0001 - Installation of Equipment- 13 Water Bottle Filling (W91QF426BA010)

Solicitation # W91QF426BA010

The U.S. Army’s Mission Installation Contracting Command at Fort Leavenworth is soliciting sealed bids for a small business set-aside contract to install thirteen ELKAY bottle filling stations at the Presidio of Monterey, California, along with all associated plumbing services. This requirement, identified by solicitation number W91QF426BA010 and classified under NAICS code 238220 for Plumbing, Heating, and Air-Conditioning Contractors, is reserved exclusively for small businesses with a size standard of $19.0 million in annual receipts. The work involves delivering and installing the water bottle fillers into existing water fountains across eleven designated buildings, with full responsibility for removal and disposal of debris, compliance with current plumbing and building codes, and adherence to stringent standards including ADA, NSF/ANSI 42, 53, 61, 372, and others for safety, performance, and lead-free materials. Bidders must be registered in the System for Award Management with a Unique Entity ID and must submit responses by the August 26, 2026 deadline. A mandatory site visit is scheduled for July 30, 2026, at the Presidio of Monterey, accessible via the Pvt. Bolio Road check-in point, with all attendees required to arrive by 10:15 AM and RSVP in advance. The contract will be awarded based on the most advantageous bid considering price and related factors under sealed bidding procedures. All technical inquiries and submissions must be directed to Tyerees M. Sanders at tyerees.m.sanders.civ@army.mil, and a complete Statement of Work and eight attachments are included in the solicitation package available through SAM.gov. The contract is structured as a requirements-type agreement under FAR Subpart 16.503, requiring the selected contractor to manage multiple task orders while maintaining quality control, scheduling, and subcontractor coordination.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

W91QF4-26-B-A013 - Installation Lightning Protection (Insp-Test-Rpr)

Solicitation # W91QF4-26-B-A012

The U.S. Army Mission Installation Contracting Command at Fort Leavenworth, Kansas, is seeking a small business contractor to perform inspection, testing, and repair services for lightning protection systems across multiple facilities on post. This requirement, identified by solicitation number W91QF4-26-B-A013, is being advertised as a pre-solicitation synopsis under FAR 5.101 and will be procured through sealed bidding procedures under FAR Part 14 as a total small business set-aside. The work involves comprehensive visual inspections and certified resistance testing of lightning protection systems in accordance with Unified Facilities Criteria 3-575-01, NFPA 780, DA PAM-385-64, UL standards, and other applicable regulatory codes. Contractors must deliver detailed inspection and testing reports for each facility, including facility number, system description, component locations, test results with resistance measurements in ohms, and clear identification of deficiencies. Additionally, the contractor is required to generate scale isometric projection drawings for every facility, either in ANSI D size (22” x 34”) full-scale physical format or as digital CAD .DWG files with full resolution fidelity, ensuring all components are labeled for identification and future repair reference. These drawings and reports must be submitted within 30 days of work completion, along with a pre-work Quality Control Program and Service Schedule, and a list of key personnel within 30 days of award. The contract is anticipated to have a base period of one year with four additional one-year options, for a potential total value of up to $2.5 million, though the initial award is estimated between $250,000 and $500,000. All deliverables must be labeled with the contract number, building number, and drawing identifier and submitted in formats compatible with Windows 11 and Adobe Acrobat Pro 2020.009 or later. Contractors must comply with stringent site access and security protocols, including mandatory National Agency Checks for employees, use of Visitor Control Center procedures to obtain day passes or Local Access Credential cards, and subjecting all personnel and equipment to search upon entry or exit. All staff must wear visibly displayed ID badges with their full name, company, and photo, and must be fluent in English. Mandatory training includes Level I Operations Security training within 30 days of award and annual refreshers, as well as AT Level I training. Performance will be measured against

Other Building Equipment Contractors

POSTED

DEADLINE

Installation Access and Badge Management CoordinationThe contract requires coordination of personnel and vehicle vetting, badge issuance, and ongoing access compliance for subcontractor teams operating at Fort Leavenworth’s Military Correctional Complex. All activities must align with strict security protocols inherent to a Department of Defense installation, ensuring only authorized individuals gain entry and maintain approved access levels throughout their tenure on site. This includes managing the full lifecycle of identification credentials, verifying background checks, and enforcing adherence to facility-specific access rules to safeguard sensitive operations and infrastructure. Work is performed exclusively at Fort Leavenworth, Kansas, with a response deadline of August 13, 2026, and the solicitation was posted on July 31, 2026. The NAICS code 561520 indicates this effort falls under administrative management and security services, with the contracting agency identified as W6QM Micc-Ft Leavenworth under the Department of Defense. The nature of the work is strictly as a subcontract, meaning the awardee will operate under the direction of a prime contractor or higher-tier entity responsible for broader services at the facility. Comprehensive compliance with military installation standards is mandatory throughout the performance period.

POSTED

DEADLINE

Antiterrorism and Security Awareness Training DeliveryContractor personnel must complete mandatory Antiterrorism Awareness Training in accordance with DFARS clause 252.204-7004 before being granted access to or deploying to Fort Leavenworth. The training is a prerequisite for any work performed at the installation and ensures all individuals are adequately prepared to recognize and respond to potential terrorist threats. The contract is classified as a subcontract under NAICS code 611430, which pertains to colleges and universities, indicating the training may be delivered through educational or institutional channels. It is being managed by the Department of Defense through the W6QM Micc-Ft Leavenworth office, with performance required specifically at Fort Leavenworth, Kansas, 66027. The solicitation was posted on July 31, 2026, and responses are due by August 13, 2026, by 7:00 PM, creating a narrow window for submission and preparation. Failure to comply with the training requirement will prevent personnel from accessing the installation and may result in contract non-performance or termination.

Professional and Management Development Training

POSTED

DEADLINE

Cybersecurity Compliance (CMMC & NIST SP 800-171) SupportThe contract seeks advisory and implementation services to support cybersecurity compliance with the Cybersecurity Maturity Model Certification (CMMC) Levels 1 through 3 and the National Institute of Standards and Technology Special Publication 800-171, specifically for the protection of Covered Defense Information and Controlled Unclassified Information. Providers must demonstrate the ability to assess current security postures, implement necessary controls, and prepare organizations for CMMC assessments, aligning with DoD requirements for safeguarding sensitive data across the supply chain. Services are expected to include gap analysis, policy and procedure development, training, documentation, and ongoing compliance support to ensure readiness for third-party audits. This subcontract is issued under NAICS code 541512, which covers computer systems design services, and is tied to the Department of Defense activity at Fort Leavenworth, Kansas, with performance requirements centered on that location. The solicitation was posted on July 31, 2026, and responses must be submitted by August 13, 2026, indicating a limited window for qualification and proposal submission. The entity is expected to have demonstrated expertise in federal cybersecurity frameworks and experience working with defense contractors or subcontractors on CMMC and NIST 800-171 compliance initiatives, with an emphasis on actionable implementation rather than theoretical guidance.

Computer Systems Design Services

POSTED

DEADLINE

Military Shipment and Storage Marking (MIL-STD-129 Compliance)The contract requires full compliance with MIL-STD-129 for the exterior packaging and labeling of military shipments, encompassing all levels of containment including unit packs, intermediate containers, and outer crates. All markings must meet exact military standards for legibility, durability, and content to ensure accurate tracking, handling, and storage throughout the defense logistics chain. The work must be performed in alignment with strict federal guidelines to support the Department of Defense’s operational readiness and supply chain integrity. This subcontract is issued by the Department of Defense through the W6QM Micc-Ft Leavenworth office, with performance required at Fort Leavenworth, Kansas, 66027. The solicitation was posted on July 31, 2026, and responses must be submitted by August 13, 2026, by 7:00 PM. The NAICS code 561990 classifies the scope under other support activities for transportation, indicating a focus on specialized logistics and packaging services rather than general freight. While no set-aside or point of contact information is provided, the contract is open to qualified subcontractors capable of delivering compliant, reliable, and timely packaging solutions for military cargo.

All Other Support Services

POSTED

DEADLINE