Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from Department Of Homeland Security was posted on July 6, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Emergency & Exit Lighting Inspection

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238210
New
SLED
Existing Generators Replacement Aguadilla, PR
Solicitation # 872298
This project involves the complete replacement of two existing power generators at the Aguadilla Detention Facility in Aguadilla, Puerto Rico. The scope of work requires the installation of one 100 kW and one 150 kW Perkins diesel generator, both featuring stainless-steel enclosures to protect against salt air and moisture. The installation includes two new NEMA 3R automatic transfer switches, securing the units to the existing concrete slab with Grade 5 or higher galvanized anchor bolts, and performing comprehensive generator load tests. The project is estimated to have a magnitude between $250,000 and $300,000, with a total period of performance of 270 calendar days from the Notice to Proceed. The contract is a Firm-Fixed-Price task order issued under an 8(a) Multiple Award Construction Contract (MACC) IDIQ. Award will be based solely on the lowest total evaluated price, provided the offeror demonstrates technical understanding, a sound implementation approach, and a robust safety and quality control program. Key compliance requirements include adherence to the Buy American Act, Davis-Bacon prevailing wage rates per determination PR20260001, and strict security protocols, including PIV card issuance and non-disclosure agreements for personnel. All work must be performed during regular business hours, Monday through Friday, and must comply with NFPA 70, the International Building Code, and NEC Article 445.
Bristol Alliance of Companies

POSTED

about 14 hours ago

DEADLINE

in 18 days
NAICS: 238210
New
SLED
LED Lighting and Occupancy Sensor Upgrades DRAFT
Solicitation # 872291
The LED Lighting and Occupancy Sensor Upgrade project is a Firm-Fixed-Price task order issued under an 8(a) Multiple Award Construction Contract (MACC) for the Buffalo Federal Detention Facility in Batavia, New York. The project involves providing all engineering, labor, equipment, and materials to upgrade the facility with energy-efficient LED lighting fixtures and occupancy sensors, including the removal and disposal of existing fluorescent fixtures, lamps, and ballasts. The estimated magnitude of the contract is between 2 million and 2.3 million dollars, with a period of performance of 180 calendar days from the notice to proceed. Award will be based solely on the lowest total evaluated price. The contractor is required to adhere to Davis-Bacon Act wage determinations and comply with standards from OSHA, ADA, NFPA, and the International Building Code. Key deliverables include a Quality Control Plan due within 15 days of award, a site survey within 30 days, and a final closeout package consisting of as-built drawings, warranty documentation, and 5 percent attic stock. The contractor must also provide a minimum two-hour training session for facility maintenance personnel and a detailed commissioning report verifying that 100 percent of fixtures and controls were tested. Payment requests must be submitted electronically via the Invoice Processing Platform and accompanied by certified payroll.
Bristol Alliance of Companies

POSTED

about 14 hours ago

DEADLINE

in 18 days
NAICS: 238210
New
SLED
Conex Offices for Forensics Personnel - St. Thomas
Solicitation # 872300
This project involves a Firm-Fixed-Price task order under an 8(a) Multiple Award Construction Contract for the provision and installation of two 40ft steel FLEXTAINER conex offices for forensics personnel at the St. Thomas HSI Facility in the US Virgin Islands. The scope of work includes the construction of 3k PSI reinforced concrete slabs, installation of the units, and equipping each office with two split-system A/C units, R-11 insulation, vinyl flooring, LED lighting, and a steel door with a Cypher lock. Each unit must also include four security windows and a 5-pound ABC fire extinguisher. Electrical connectivity must be established via 2-inch PVC or uPVC conduit to the nearest circuit. The contract has an estimated magnitude between 250,000 and 300,000 dollars, with a period of performance of 364 calendar days from the Notice to Proceed. Award will be based on the lowest total evaluated price, considering technical approach, safety, and quality control plans. Key requirements include compliance with the Buy American Act, adherence to Davis-Bacon prevailing wage rates for the Virgin Islands, and strict security protocols, including the signing of DHS Non-Disclosure Agreements and mandatory cybersecurity training. Contractors must conduct a site survey prior to proposal submission and provide a detailed project schedule within 15 days of the Notice to Proceed. All invoicing must be processed through the Invoice Processing Platform and accompanied by certified payroll.
Bristol Alliance of Companies

POSTED

about 14 hours ago

DEADLINE

in 18 days
NAICS: 238210
New
IE JCC Fire Alarm Repairs
Solicitation # Inland Empire Fire Alarm Deficiencies (169706,169708,169733,169736 & 16937)
Management & Training Corporation (MTC), operator of the Inland Empire Job Corps Center in San Bernardino, California, is soliciting subcontractor bids for a fixed-price, single lump sum contract to address fire alarm deficiencies. The scope of work includes the installation of manual pull stations, horn/strobe notification appliances, and the replacement of six existing fire alarm bells with new horn/strobe units. All new devices must be integrated into the existing fire alarm system and undergo complete functional testing. The project must be completed within 90 consecutive business days following a written Notice to Proceed, with work beginning within five business days of an agreed-upon start date. Bids are due by 3:00 pm PT on September 16, 2026. Submissions must include the MTC Bid for Lump Sum Contract form, a detailed cost breakout on company letterhead, a completed MTC Supplier Packet (W-9, self-certification, and terms acceptance), and proof of insurance. For bids equal to or greater than $25,000, a bid bond guarantee of 20% of the base bid is required, and the awarded contractor must provide performance and payment bonds totaling 100% of the contract price. The contract is subject to Construction Wage Rate Requirements (CWRR), requiring compliance with California prevailing wage determinations and the submission of weekly certified payroll. Award will be based on overall best value.
Inland Empire Job Corps

POSTED

about 14 hours ago

DEADLINE

in 5 days

AI Contract Overview

Show more

The contract pertains to the inspection and testing of emergency and exit lighting systems to ensure compliance with NFPA 101 and NFPA 70 standards, requiring both 30-second and 90-minute functional tests to verify system reliability during power outages. The work is scoped as a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, with the NAICS code 238210 indicating electrical contracting services. Performance of the work is specifically required at a location in Clearwater, Florida, with a zip code of 33762, under the oversight of the Department of Homeland Security, Base MIAMI. The solicitation was posted on July 6, 2026, and responses must be submitted by July 15, 2026, at 3:00 PM Eastern Time. The contract is managed by a federal agency within the Department of Homeland Security, though no specific point of contact or additional address details are provided. The requirement demands adherence to nationally recognized life safety codes and calls for precise operational testing to confirm that lighting systems function as intended in emergency scenarios, making technical accuracy and regulatory compliance critical to successful performance.

General Info

Inspection and testing of emergency lighting in Clearwater, FL, per NFPA standards under DHS oversight, for small business contract.

Agency

Department Of Homeland Security → Base MIAMI(00028)View Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

Clearwater, FL, 33762, USA

Set-Aside

SBA

Documents

This scope was carved out of 20150PR260000091.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Annual Inspection, Testing and Limited Maintenance of all Installed Fire Alarm and Detection Systems, Water Based Fire Protection Systems, Dry Chemical Extinguishing Systems, Wet Chemical Extinguishing Systems and Fire Pump

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Homeland Security → Base MIAMI(00028)
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Homeland Security → Base MIAMI(00028)
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Inspection and testing of emergency and exit lighting systems to ensure compliance with NFPA 101 and NFPA 70, including 30-second and 90-minute functional tests.

More opportunities from Department Of Homeland Security → Base MIAMI(00028)

Same awarding agency

NAICS: 326299
New
Federal
USCG Base Miami Beach Replacement Fenders
Solicitation # 31020PR260000231
The United States Coast Guard Base Miami Beach Facilities Engineering division is soliciting quotations for a firm-fixed-price contract to procure three high-performance, foam-filled marine fenders. These fenders must have a nominal diameter of 5 feet and a length of 8 feet, featuring a 100 percent closed-cell foam core and a minimum 1.0 inch reinforced elastomeric polyurethane skin in non-marking marine black. A critical requirement is that all internal tension components, swivel end fittings, and bow or anchor shackles be constructed exclusively from Type 316 stainless steel to withstand harsh saltwater environments. The procurement includes the delivery of the fenders, technical data submittals, and logistics, with all items delivered FOB Destination to Base Miami Beach. The solicitation is a 100 percent total small business set-aside under NAICS code 326299. Award will be based on the best value, defined as the lowest evaluated price among technically acceptable offerors. Technical acceptability is contingent upon meeting specific performance ratings, including a minimum energy absorption of 136 ft-kip and a maximum reaction force of 101 kip. Additionally, the manufacturer must maintain an active ISO 9001 certification and provide certified mill test reports for all stainless steel hardware. Fabrication cannot begin until the Contracting Officer Representative provides written approval of all technical submittals, which are due within 15 calendar days of the award.
All Other Rubber Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336611
New
Federal
CGC Kathleen Moore Pre-Alignment, Alignment, Post-Alignment Verification
Solicitation # 70Z02826Q0000495
Solicitation 70Z028-26-Q-0000495 is a small business set-aside for a firm fixed price services contract to be awarded using simplified acquisition procedures under FAR part 13. The project requires a qualified contractor to provide all labor, supervision, materials, and equipment for the pre-alignment inspection, precision alignment, and post-alignment verification of two newly installed MTU 20V4000M93L main diesel engines aboard the CGC Kathleen Moore. The work will be performed at USCG Base Miami Beach, Florida, and must ensure proper integration with existing reduction gears and propulsion system components, specifically utilizing Geislinger couplings. The contract will be awarded based on the Lowest Price Technically Acceptable offer, with an anticipated award date of September 30, 2026. The contractor must employ technicians certified and experienced with MTU 20V4000M93L engines and coordinate with a Coast Guard-provided MTU Technical Representative. Key deliverables include Pre-Alignment, Alignment, and Post-Alignment Condition Found Reports, as well as a signed engine change-out inspection form. Performance must adhere to MTU and USCG tolerances, Coast Guard Technical Publication 8902C, and specific Coast Guard drawings. Access to the facility is restricted to American citizens and permanent resident aliens, and all personnel must comply with strict base security and operational protocols at Base Miami Beach. Quotes are due by 3 p.m. on September 24, 2026, and must be submitted via email to Jerry Lopez.
Ship Building and Repairing

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 811310
New
Federal
USCG Station Crystal River – HVAC Preventative Maintenance Service
Solicitation # 70Z028-26-Q-STACRYSTALRIVER-HVAC
Solicitation 70Z028-26-Q-STACRYSTALRIVER-HVAC is a 100% small business set-aside for a firm-fixed-price services contract to provide heating, ventilation, and air conditioning (HVAC) preventative maintenance and corrective repair services for U.S. Coast Guard Station Crystal River in Inglis, Florida. The scope of work involves the maintenance of 67 distinct assets located within Building 856389, including chillers, dehumidifiers, and air handling units. The contract is structured with a base year running from September 15, 2026, to September 14, 2027, and four subsequent one-year options extending through September 14, 2031. Services are divided into routine preventative maintenance performed according to USCG SAM Job Plans and manufacturer recommendations, and corrective repairs which are capped annually at 40 labor hours and a not-to-exceed parts limit of 5,000 dollars. The award will be made using simplified acquisition procedures under FAR Part 13 to the lowest-priced offeror whose technical volume is deemed acceptable. To be eligible, offerors must maintain active SAM registration and provide proof of EPA Section 608 universal certifications, relevant state commercial HVAC licenses, a draft Quality Control Plan, and three recent past performance references. All invoicing must be processed electronically through the Invoice Processing Platform. Technical requirements include strict adherence to cybersecurity protocols for diagnostic equipment, with remote diagnostics prohibited. The government will evaluate proposals based on technical acceptability, total price for the base and option years, and past performance.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

2 days ago

DEADLINE

in 2 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS