Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Emergency Service Call Response for MicroScan System

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract involves providing on-demand emergency repair services specifically for the DxM 1040 MicroScan Walkaway system. The contractor is required to perform on-site maintenance within two business days from the time they are notified of an issue. The service ensures timely response and repair to minimize downtime of the equipment, which is critical for its operational use. The contract is a subcontract type issued by the Department of Veterans Affairs under the NAICS code 811211, which covers other auto mechanical and electrical repair and maintenance. Although certain location and point of contact details are not specified, the contract was posted on November 18, 2025, and is managed through the 257-NETWORK Contract Office 17 (36C257). This arrangement underscores the importance of prompt, reliable technical support for the MicroScan system within the government healthcare environment.

General Info

On-demand emergency repair for DxM 1040 MicroScan Walkaway within two business days.

Agency

Department Of Veterans Affairs → 257-NETWORK Contract Office 17 (36C257)

NAICS

811211 - Consumer Electronics Repair and Maintenance

Place of Performance

TX

Set-Aside

NONE

Documents

This scope was carved out of 36C25726Q0004.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

J066--DxM 1040 MicroScan WalkAway PM

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 18

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → 257-NETWORK Contract Office 17 (36C257)

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Veterans Affairs → 257-NETWORK Contract Office 17 (36C257)

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide on-demand emergency repair services with on-site maintenance required within two business days of notification for the DxM 1040 MicroScan Walkaway system.

Similar Contracts

Same NAICS industry code

Electrical Chassis Repair ServicesThis subcontract for Electrical Chassis Repair Services involves the refurbishment of Electrical Chassises with NIIN O15262273 for prime contractors supporting NAVSUP Weapon Systems Support projects. The selected provider will execute repairs in strict accordance with Technical Data Package Version O01 and specifications provided by the Naval Surface Warfare Center or DODSSP. The scope of work requires the use of specialized electrical refurbishment tools and full support for Government Source Inspection to ensure the final delivered product is properly repaired and inspected. Managed under NAICS code 811211 for the Department of Defense, this opportunity was posted on October 27, 2026, with a response deadline of October 30, 2026. The primary objective is the delivery of fully functional, inspected electrical chassis units that meet all government technical standards.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Medical Equipment Installation and MaintenanceThis subcontract for Medical Equipment Installation and Maintenance supports prime contractors on Department of Veterans Affairs medical laboratory projects in Tampa, Florida. The scope of work involves the delivery, installation, and continuous technical maintenance of laboratory hardware, including user-defined calibration and both hardware and software upgrades. All technical services must be performed by manufacturer-certified technicians to ensure compliance and operational efficiency. The contractor is responsible for providing all installed equipment and submitting detailed calibration reports. Additionally, the agreement requires the management of equipment removal and return shipping upon the conclusion of the contract. This effort falls under NAICS code 811211 and is managed through the Network Contract Office 8.

248-NETWORK Contract Office 8 (36C248)

POSTED

DEADLINE

Primary Engineering Control (PEC) CertificationThis subcontract opportunity is for the Primary Engineering Control certification of Biological Safety Cabinets and Laminar Airflow Workstations at VA Medical Center projects. The selected provider will perform critical performance evaluations and certifications to ensure sterile environment requirements are met, utilizing NIST-traceable airflow velocity testers and particle counters. All work must be conducted in accordance with USP 797, USP 800, and CETA CAG-003-2006 standards, with final deliverables consisting of detailed PEC Certification reports. Managed by the Department of Veterans Affairs Network Contract Office 9, this project is specifically set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 811211. To ensure technical compliance and safety, the contract mandates that all personnel performing the certifications hold CETA/CNBT certification. Interested parties must respond by October 28, 2026.

249-NETWORK Contract Office 9 (36C249)

POSTED

DEADLINE

in about 1 hour

Cable System Maintenance and Repair ServicesThe Cable System Maintenance and Repair Services subcontract involves providing technical support, troubleshooting, and hardware replacement for prime contractors at the Robinson Correctional Center in Illinois. The selected provider is responsible for dispatching technicians within 24 to 48 hours of a reported service problem and ensuring that replacement parts are installed and services are restored within a 48-hour window using specialized signal testing equipment. To maintain facility security, all technicians must successfully pass comprehensive background checks. Additionally, the contractor is required to deliver detailed maintenance logs and repair records upon the completion of each service call. This opportunity falls under NAICS code 811211, with a response deadline set for November 3, 2026.

ROBINSONCC426 - Robinson Correctional Center

POSTED

DEADLINE

Training Aid Weapon Technician/SupplierThis subcontract opportunity with the Department of National Defence involves the supply, maintenance, and repair of training aid weapons for prime contractors on simulator projects. The selected provider will be responsible for performing first-echelon repair work, managing the custody and care of compressed air systems, and supplying necessary spare parts and compressed air chargers to ensure a functioning inventory. To be eligible, the contractor must possess Secret security clearance and be registered with the Controlled Goods Program. The contract is categorized under NAICS code 811211 and is based in Canada, with a response deadline set for November 10, 2026.

Department of National Defence

POSTED

DEADLINE

Dental Suite Equipment Maintenance and CalibrationThe Dental Suite Equipment Maintenance and Calibration subcontract involves providing preventative maintenance, repair, and calibration services for prime contractors working on Department of Public Health projects at Western Massachusetts Hospital. The scope of work focuses on the routine inspection and safety calibration of X-ray machines and dental chairs using specialized diagnostic tools to ensure all equipment is fully maintained and certified. Qualified providers must hold manufacturer-specific certifications or be a Certified Biomedical Equipment Technician. This opportunity is categorized under NAICS code 811211, with performance taking place in Boston, Massachusetts. Interested parties must submit their responses by the deadline of November 30, 2026.

WMH001 - Western Massachusetts Hospital

POSTED

DEADLINE

in about 1 month

Post-Warranty Service and Maintenance (Years 2-3)This subcontract focuses on providing post-warranty service and maintenance for the QuantStudio 5 Dx instrument supporting Tarrant County laboratory projects. The scope of work includes performing scheduled preventative maintenance, corrective repairs, troubleshooting, and ongoing qualification checks to ensure maximum instrument uptime and valid qualification status. All services must be executed by a Certified Field Service Engineer using original equipment manufacturer replacement parts. The opportunity is categorized under NAICS code 811211 and is managed by Tarrant County in Texas. Interested parties should note that the posting date is October 16, 2026, with a response deadline set for November 5, 2026. This contract specifically covers the second and third years of the post-warranty service period.

POSTED

DEADLINE

QuantStudio 5 Dx Installation and Qualification ServicesThis subcontract for Tarrant County in Texas involves the physical installation, network integration, and technical qualification of the QuantStudio 5 Dx genetic analysis instrument. The scope of work includes executing account and security configurations, verifying connectivity with Diomni software, and completing all necessary maintenance qualification procedures to ensure the instrument is fully operational. To fulfill these requirements, the project mandates the use of a Certified Field Service Engineer specifically qualified for the QuantStudio 5 Dx. The contract was posted on October 16, 2026, with a response deadline of November 5, 2026, falling under NAICS code 811211.

POSTED

DEADLINE

MH-139 Ni-Cad Battery Maintenance SpecialistThis subcontract opportunity is for a MH-139 Ni-Cad Battery Maintenance Specialist to support prime contractors on Department of Defense projects at F. E. Warren AFB. The selected provider will be responsible for the comprehensive readiness management of Nickel-Cadmium batteries, including storage, inspection, fluid leveling, discharging, charging, and testing. All work must be performed using Christie RF80-M analyzers in strict accordance with OEM standards, AFOSH compliance, and USAF T.O. 00-20-1 regulations. The contractor is required to provide certified personnel to deliver fully serviced and certified batteries along with all necessary AFTO/DD documentation. This is a total small business set-aside under NAICS code 811211. Interested parties must submit their responses by October 29, 2026, for performance located in zip code 82001.

FA4613 90 Cons Pk

POSTED

DEADLINE

Sensy Sampling and Analysis Technical ServicesThe Sensy Sampling and Analysis Technical Services subcontract involves providing specialized sampling and analysis services for prime contractors operating on New York Power Authority projects at the Charles Poletti Power Project. The scope of work focuses on the technical analysis of samples, system calibration, and performance verification specifically utilizing Sensy sampling and analysis systems. To ensure operational standards, personnel are required to possess technical certification and training specific to Sensy equipment. Key deliverables for this engagement include the submission of detailed analysis reports, the provision of calibrated systems, and the maintenance of technical service logs. This opportunity is categorized under NAICS code 811211 and is associated with the Power Authority of New York. Interested parties should note the response deadline of November 3, 2026.

Power Authority of New York

POSTED

DEADLINE

Liquid-Filled Power Transformer Repair and RewindingThis subcontract involves the core technical refurbishment of a Square D Schneider Electric liquid-filled power transformer for prime contractors working on City of Hayward Water Resource Recovery Facility projects. The scope of work includes the removal of old windings and insulation, the installation of new components, and the completion of internal bus connection work. To ensure operational integrity, the contractor must conduct comprehensive shop testing, including winding-resistance, insulation-resistance, power-factor, and dielectric-strength tests, to verify an impedance of 5.67%. The final deliverable is a fully refurbished transformer unit to be performed in Hayward, California.

City of Hayward

POSTED

DEADLINE

in about 1 hour

Battery Charger Repair and Functional RestorationThis subcontract involves the teardown, evaluation, repair, and modification of battery chargers for prime contractors supporting Navsup Weapon Systems Support Mech projects. The contractor is responsible for delivering 15 fully repaired and functional battery chargers under NSN 6130-01-158-5195, ensuring all work adheres to technical orders, drawings, and the specific requirements of CAGE Code 072E5 and Reference Number 1657613-100. Compliance is mandatory with MIL-STD-130, REV N for marking and all applicable CMMC standards. The project falls under NAICS code 811211 and is managed through the Department of Defense. The response deadline for this opportunity is November 9, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

More opportunities from Department Of Veterans Affairs → 257-NETWORK Contract Office 17 (36C257)

Same awarding agency

6550--Blood Bank Reagents

Solicitation # 36C25727Q0065

The Department of Veterans Affairs VA North Texas Health Care System is issuing a Sources Sought Notice to identify qualified vendors capable of providing blood bank reagents for the Transfusion Medicine Unit in Dallas, Texas. These reagents, including ALBAcyte A1, A2, B, IgG Sensitized, Antibody ID Panels, and C3 Coated Red Blood Cells, are essential for manual blood typing and serum antibody detection used in cross-matching blood for transfusions. The anticipated acquisition strategy includes a base year starting May 1, 2027, with four subsequent one-year option periods extending through April 30, 2032. To be considered, vendors must be FDA approved, provide documentation of such approval, and maintain a defined quality plan with adequate supply availability. All shipments must be FOB Destination, and the contractor is responsible for providing appropriate shipping containers. Interested vendors must submit an electronic capability statement in PDF or Word format, including the place of manufacture for all listed reagents, to the designated contract specialist by November 5, 2026, at 9:00 AM CST. This notice is for market research purposes only to determine the appropriate acquisition strategy, such as a small business set-aside, and does not constitute a formal solicitation.

In-Vitro Diagnostic Substance Manufacturing

POSTED

about 6 hours ago

DEADLINE

Replace Fisher House 1 HVAC System

Solicitation # 36C25726Q0864

Solicitation 36C25726Q0864 was issued by the Department of Veterans Affairs, Network Contract Office 17, for the replacement and upgrade of the HVAC system at Fisher House 1 in San Antonio, Texas. The scope of work included the removal and replacement of three outdoor condenser units and three air handler units, along with associated ductwork, refrigerant piping, and wall controls, and the demolition of the existing boiler system. The project required a Level 3 Infection Control Risk Assessment and the implementation of individual bedroom thermostats. This procurement was designated as a 100 percent set-aside for Service-Disabled Veteran-Owned Small Businesses, with an estimated contract magnitude between 250,000 and 500,000 dollars. The government intended to award the contract using a Lowest Price Technically Acceptable process, requiring offerors to submit a two-volume proposal consisting of a price schedule and administrative certifications. Key requirements included the provision of performance and payment bonds, adherence to the Davis-Bacon Act, and the submission of a Contractor Quality Control Plan. However, the government has since determined that changes to the requirement are necessary and has canceled the solicitation in its entirety, reserving the right to resolicit the requirement at a later date.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 6 hours ago

DEADLINE

Testing & Inspecting, Preventative Maintenance, Corrective Repair, Emergency Repair, and Service Calls

Solicitation # 36C25727R0018

Solicitation 36C25727R0018 is a Firm-Fixed-Price, indefinite-quantity contract issued by the Department of Veterans Affairs for mold remediation and water intrusion services. This procurement is a total set-aside for VIP-listed Service-Disabled Veteran-Owned Small Businesses (SDVOSB) under NAICS code 562910. The scope of work involves providing all labor, equipment, and supervision for emergency response, stabilization, and remediation of water intrusion events across multiple Texas locations, including Dallas, Garland, Bonham, and Grand Prairie. The contract is structured across three ordering periods from December 1, 2026, through November 30, 2029. The contractor must adhere to strict response time tiers, ranging from two hours for patient-critical areas to eight hours for administrative support. Performance is governed by ANSI/IICRC S520-2024, EPA guidelines, and VHA M3P standards, with a heavy emphasis on ICRA/PCRA workflows and OSHA 1910.134 safety compliance. Award will be based on a best-value determination evaluating technical approach, price, and past performance, rather than the lowest price. Proposals are due by November 18, 2027, and must be submitted in two separate PDF volumes, including a redacted technical version for evaluation.

Remediation Services

POSTED

about 6 hours ago

DEADLINE

in about 1 year

Data Breach Notification and Credit Monitoring ServicesThis subcontract for Data Breach Notification and Credit Monitoring Services supports prime contractors on Department of Veterans Affairs North Texas Healthcare System projects. The selected provider will perform breach analysis in accordance with VA Handbook 6500.2, manage the notification process for affected individuals, and provide one year of credit monitoring across three major bureaus. Key deliverables include the provision of credit monitoring reports and formal fraud resolution letters. The contract requires the service provider to maintain identity theft insurance with a minimum coverage of 20,000 dollars. Performance will take place in San Antonio, Texas, under NAICS code 561450. Interested parties must adhere to the response deadline of November 6, 2026.

POSTED

DEADLINE

Windows 2019 Server & Interface Diagnostics SupportThis subcontract for Windows 2019 Server and Interface Diagnostics Support provides essential technical services for prime contractors working on Department of Veterans Affairs NCO 17 North Texas Healthcare System projects. The scope of work includes 24/7 telephone support, proactive remote diagnostics via secure servers, software updates, and the delivery of applied patches and diagnostic reports to ensure maximum system uptime. All activities must be performed in strict compliance with VA data security standards. The project is categorized under NAICS code 541512 and is managed by the Network Contract Office 17. Performance of the contract is centered in San Antonio, Texas. Interested parties should note the response deadline of November 6, 2026, for this specific procurement opportunity.

Computer Systems Design Services

POSTED

DEADLINE

Omnicell XT/XTE Cabinet Field Maintenance and RepairThis subcontract involves providing on-site maintenance, repair, and parts replacement for Omnicell XT and XTE series automated dispensing cabinets. Supporting the Department of Veterans Affairs North Texas Healthcare System, the contractor must ensure systems remain fully operational and maintain detailed maintenance logs. The scope of work requires 24/7 support with a strict emergency response time of six hours for any disabled systems. To qualify, the provider must be an OEM authorized dealer and all personnel must undergo background investigations in accordance with VA Directive 0710. The work is performed in San Antonio, Texas, under NAICS code 811219. Interested parties must respond by November 6, 2026.

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Air-Fluidized Therapy System SupplierThis subcontract opportunity is for the supply and delivery of air-fluidized therapy systems to support prime contractors on Department of Veterans Affairs medical equipment projects. The scope of work involves implementing advanced systems designed for microclimate management and pressure redistribution to treat burns, complex skin wounds, and pressure ulcers. The selected provider is responsible for ensuring that all therapy systems are fully installed and operational upon delivery. To be eligible, providers must hold certification as an authorized OEM dealer, distributor, or reseller, as the procurement of gray market items is strictly prohibited. This requirement falls under NAICS code 423450 and is managed through the Department of Veterans Affairs Network Contract Office 17. Interested parties must submit their responses by November 2, 2026.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Rotoprone Therapy System SupplierThis subcontract opportunity involves the supply and delivery of Rotoprone Therapy System beds for prime contractors working on Department of Veterans Affairs medical equipment projects. The selected provider is responsible for delivering automated prone therapy beds and performing the necessary installation to ensure the systems are fully operational and capable of supporting multiple intervals of prone therapy over extended periods. To be eligible, providers must hold certification as an OEM authorized dealer, distributor, or reseller, as gray market items are strictly prohibited. This requirement ensures that all equipment meets official standards for quality and support within VA medical facilities.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

W065--NTX Bed Rentals, new (VA-27-00010946)

Solicitation # 36C25727Q0063

The Department of Veterans Affairs, through the Network Contracting Office VA South Texas, is conducting market research to establish a procurement strategy for the lease and maintenance of Rotoprone Therapy System beds for the VA North Texas Health Care System in Dallas, Texas. These specialized beds are critical for treating patients with acute pulmonary complications, such as acute respiratory distress syndrome, by providing automated prone therapy to improve oxygenation and reduce mortality. Additionally, the equipment provides air-fluidized therapy for advanced pressure redistribution to treat complex skin wounds, burns, and pressure ulcers. The scope of work includes the provision of all labor, equipment, supervision, and expertise required for the short-term lease and maintenance of these systems, which must be performed by qualified personnel using approved tools and replacement parts. This sources-sought notice, under NAICS code 532490, aims to determine if the requirement should be a sole source, unrestricted, or a set-aside for small businesses, with a particular interest in Service Disabled Veteran Owned Small Businesses and Veteran Owned Small Businesses. Interested vendors must provide their business details, SAM UID, and estimated market research pricing by November 2, 2026. A critical requirement for all respondents is the provision of documentation proving they are an authorized dealer, distributor, or reseller of the Original Equipment Manufacturer, as the VA will not accept gray market items. This action is currently for informational and planning purposes and does not constitute a formal solicitation for offers.

Other Commercial and Industrial Machinery and Equipment Rental and Leasing

POSTED

DEADLINE

J065--Omnicell Service & Maintenance

Solicitation # 36C25727Q0068

The Department of Veterans Affairs, through the NCO 17 North Texas Healthcare System, intends to issue a sole source firm fixed price contract for the maintenance and service of Omnicell automation equipment. The primary objective is to ensure that these resources remain fully operational to prevent disruptions to patient care across the South Texas Veteran Health Care Systems. This includes the Audie L. Murphy Memorial Veterans Hospital, Kerrville VA Medical Center, Northwest VA Medical Center, and various community-based outpatient clinics throughout San Antonio, New Braunfels, and Victoria, Texas. To maintain OEM warranties and service standards, the contractor must be an Original Equipment Manufacturer authorized dealer, distributor, or reseller. The scope of work includes proactive remote software and interface diagnostics and strict adherence to response time requirements, with a 30-minute window during standard business hours and a 2-hour window during nights, weekends, and holidays. The contract covers a variety of equipment, including Windows 2019 servers and multiple configurations of XT and XTE cabinet systems. Personnel are subject to rigorous background investigations per VA Directive 0710, and the contractor is held liable for liquidated damages in the event of a data breach involving sensitive personal information. Additionally, the contractor must ensure that all memory storage devices remain in VA custody if equipment is removed from the facility and must follow specific safety protocols for transporting rolling stock equipment.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

J041--Preventive and Corrective Maintenance for Ice Machines

Solicitation # 36C25727Q0009

Solicitation 36C25727Q0009 is a combined requirement issued by the Department of Veterans Affairs, Network Contracting Office 17, for the preventive and corrective maintenance of approximately 95 government-owned ice machines across seven locations within the VA North Texas Health Care System. This procurement is set aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) under NAICS 8110310. The contract structure consists of a base period from November 9, 2026, to November 8, 2027, with four subsequent option years, for a total potential duration of five years. The scope of work includes quarterly preventive maintenance, which requires the mandatory replacement of all water filters and cartridges, as well as corrective repairs to minimize equipment downtime. The government will utilize a competitive best value selection process based on a comparative analysis of technical capability and past performance. Key performance standards include a 95 percent fleet uptime requirement and strict response times: four hours for emergency calls affecting patient care, 24 hours for priority calls, and 72 hours for routine calls. All technicians performing refrigerant work must hold current EPA Section 608 certification. Maintenance must adhere to CDC sanitation guidelines, VA infection control policies, and The Joint Commission standards. Awardees are required to submit a preventive maintenance schedule within seven days of award and be fully mobilized within 14 days.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

6505--Sources Sought Notice - Ga68 Dotatate (NETSPOT)

Solicitation # 36C25727Q0060

The Department of Veterans Affairs, Network Contracting Office 17, has issued a Sources Sought Notice under solicitation number 36C25727Q0060 to identify capable firms for the procurement of NETSPOT Gallium Ga 68 Dotatate Injection. This radiopharmaceutical item is to be delivered to the VA North Texas Health Care System located at 4500 S. Lancaster Rd., Dallas, TX 75216-7167. The procurement falls under NAICS code 325412. This notice is intended for information and planning purposes only and does not constitute a formal request for quotes or proposals, nor will a contract be awarded directly from this notice. Interested firms must respond to the primary point of contact, Vance Farrell, by October 30, 2026, at 5:01 PM. Responses must include the company name and are encouraged to include a capabilities statement to demonstrate the firm's ability to provide the required medical item.

Pharmaceutical Preparation Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Preventative Maintenance and Repair Services for DxM 1040 MicroScan Walkaway System

257-NETWORK Contract Office 17 (36C257)

POSTED

DEADLINE

On-Site Maintenance and Repair Services for Angiojet Thrombectomy Equipment

255-NETWORK Contract Office 15 (36C255)

POSTED

DEADLINE

Medtronic Bone Drill Preventive Maintenance & Calibration Services

250-NETWORK Contract Office 10 (36C250)

POSTED

DEADLINE

On-Demand Repair and Emergency Call-Out Services

248-NETWORK Contract Office 8 (36C248)

POSTED

CLOSED

Preventive Maintenance – MRXperion MR Injection System (x2 units)

248-NETWORK Contract Office 8 (36C248)

POSTED

CLOSED

Preventive Maintenance – Intego PET Infusion System

248-NETWORK Contract Office 8 (36C248)

POSTED

CLOSED

OMNICELL RX Dispenser Preventive Maintenance Services

249-NETWORK Contract Office 9 (36C249)

POSTED

about 1 year ago

DEADLINE

Marine Generator Load Banking Services

Sflc Procurement Branch 2(00085)

POSTED

about 1 year ago

CLOSED

about 1 year ago

Preventative Maintenance for V-PRO Max 2 Sterilizers

242-NETWORK Contract Office 02 (36C242)

POSTED

about 1 year ago

DEADLINE

Preventative Maintenance for AMSCO Sterilization Washers

242-NETWORK Contract Office 02 (36C242)

POSTED

about 1 year ago

DEADLINE

On-Site Installation and Integration Services

FA8571 Maintenance Contracting Afsc Pzim

POSTED

about 1 year ago

CLOSED

about 1 year ago

Technical Support and Field Service for GeneXpert Instruments

245-NETWORK Contract Office 5 (36C245)

POSTED

about 1 year ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS