Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from Government of Canada was posted on July 27, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Energy and Water Efficiency Technology Integration

Closed
International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334510
New
Federal
36C25926Q0858| Sources Sought on Brain Stimulator for Salt Lake City VA Medical Center
Solicitation # 36C25926Q0858
The Department of Veterans Affairs, through Network Contracting Office 19, is conducting a market survey to identify potential sources for a Transcranial Magnetic Stimulation (TMS) machine for the Salt Lake City VA Medical Center. This Sources Sought Notice, under NAICS code 334510, is intended for planning purposes to determine vendor capabilities and socioeconomic size classifications. Interested companies must submit their responses to Lynn Lim by 12:00 pm MT on September 14, 2026, providing company details, entity IDs, delivery timelines, and manufacturer information. The required equipment must be a biphasic waveform stimulator supporting repetitive (rTMS) and Intermittent Theta Burst Stimulation (iTBS) capabilities, featuring air-cooled figure-of-eight coils and a 3D navigation stim guide coil positioning system. The scope of work includes the procurement, delivery, installation, provider training, and ongoing maintenance of the machine at the George E. Whalen VA Medical Center in Salt Lake City, Utah. All equipment must comply with FDA regulations and medical device standards, incorporating safety features such as emergency stop buttons and software safeguards to prevent over-stimulation. Respondents must certify the country of origin for the end products using the Buy American Certificate (FAR 52.225-2) and demonstrate robust quality assurance processes. While the contractor will not have access to sensitive VA information, they are obligated to protect any PHI or PII in accordance with federal guidelines. This notice is for research only and does not constitute a solicitation or a commitment by the government to award a contract.
Network Contract Office 19 (36C259)

POSTED

1 day ago

DEADLINE

in 2 days
NAICS: 334510
New
Federal
Intent to Award Sole/Single Source - USAFSAM/ETB Ultrasound Task Trainer
Solicitation # IASS-AFRL-RMZB-2026-0051
The Air Force Research Laboratory Enterprise Strategies and Initiatives Contracting Division intends to award a sole source, firm fixed-price purchase order to Elevate Healthcare for an ultrasound task trainer to be used at the CSTARS Baltimore Sim Center (ETB) in Baltimore, Maryland. This procurement, identified by solicitation number IASS-AFRL-RMZB-2026-0051 under NAICS code 334510, aims to replace an outdated CPU-style simulator to modernize Point of Care Ultrasound (POCUS) training for Comprehensive Medical Readiness Program rotators, who utilize the facility for approximately 250 hours annually. Elevate Healthcare has been identified as the only vendor capable of providing a system that meets the physical requirements and fully integrates with established POCUS training protocols, ensuring continuity of instruction. The required hardware package must include a manikin, a laptop with installed software, an electromagnetic tracking system, a foot pedal, and necessary peripherals. Additionally, the vendor must provide cardiac and abdominal training packs, as well as curvilinear and TTE ultrasound replacement transducers. The contract requires a minimum one-year warranty and at least one day of virtual training. While the government is proceeding with a single source award under RFO 12.102(a), authorized distributors or responsible sources were given until September 15, 2026, to submit capability statements or exceptions to the sole source intent.
FA2396 USAF Afmc Afrl Pzl Afrl Pzle

POSTED

1 day ago

DEADLINE

in 3 days

AI Contract Overview

Show more

The contract titled Energy and Water Efficiency Technology Integration seeks to incorporate advanced energy-saving and water-conserving technologies into autoclave systems, focusing on innovations such as heat recovery systems and low-water cycle programming to enhance operational sustainability. This initiative aims to reduce utility consumption and environmental impact by optimizing the performance of autoclave equipment used in government operations under the Department of Agriculture and Agri-Food, Government of Canada. The project is structured as a subcontract and aligns with the NAICS code 334510, indicating a focus on industrial machinery and equipment manufacturing. The solicitation was posted on July 27, 2026, with a response deadline of September 2, 2026, providing potential contractors a window of approximately six weeks to submit proposals. While no specific place of performance or point of contact is detailed, the effort is part of broader federal sustainability objectives to modernize infrastructure with resource-efficient solutions. Interested parties must respond through the official Canadian government procurement portal, and the initiative reflects a strategic commitment to reducing the carbon and water footprint of federal agricultural and scientific operations.

General Info

Integrate energy and water-saving tech into autoclaves for Canadian agriculture to reduce utility use and environmental impact.

Agency

Government of Canada → Department of Agriculture and Agri-FoodView Agency

NAICS

334510 - Electromedical and Electrotherapeutic Apparatus ManufacturingView NAICS

Place of Performance

CAN

Set-Aside

NONE

Documents

This scope was carved out of ESC-2627-050.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

One (1) Autoclave Steam Sterilizer

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Department of Agriculture and Agri-Food
ContactsNo contacts available
OfficeN/A
Organization / Agency
Government of Canada → Department of Agriculture and Agri-Food
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Integration of energy-saving and water-conserving technologies into the autoclave system, such as heat recovery systems or low-water cycle programming.

More opportunities from Government of Canada → Department of Agriculture and Agri-Food

Same awarding agency

NAICS: 337215
New
International
Pavilion Design and Fabrication Services - at GULFOOD 2027
Solicitation # CSC-2627-0276
Agriculture and Agri-Food Canada is soliciting proposals for the design and fabrication of the Canada Pavilion at GULFOOD 2027, taking place from March 15 to 19, 2027, at the Dubai World Trade Center and the Dubai Exposition Center in Dubai, UAE. The project involves the creation of an 866 square metre presence spread across four halls, including specific stands in the Rice, Pulses and Grains, World Food, Meat, and Dairy halls. The design must promote the Canada Brand attributes of quality, innovation, sustainability, and diversity using approved color schemes and logos, while incorporating flexible, wheelchair-accessible layouts and sustainable, reusable materials. The contract includes a base period for 2027 with a maximum budget of 541,250 CAD, and optional extensions for GULFOOD 2028 and 2029, each capped at 519,600 CAD. Proposals will be evaluated based on a weighted formula consisting of conceptual design (50 percent), technical merit (25 percent), and price (25 percent), with minimum compliance thresholds required for the conceptual and technical portions. Bidders must provide an executive summary, a detailed design concept, a project management approach with comprehensive timelines, and a contingency plan. The successful contractor will be responsible for all fabrication, delivery duty paid, and on-site services, including the provision of detailed tender drawings for show authority approval. The contractor is also liable for structural safety and must maintain insurance for all property within the exhibit. Payment is processed within 30 days of receiving an undisputed invoice.
Showcase, Partition, Shelving, and Locker Manufacturing

POSTED

3 days ago

DEADLINE

in 3 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS