Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Environmental Compliance and Mercury Safety Certification

Active

Federal

Response Deadline08/14/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires strict adherence to Environmental Protection Agency and state regulations governing the discharge of mercury from amalgam separators, ensuring all operations comply with environmental safety standards. Full documentation and third-party verification must be provided to confirm that mercury waste is properly captured, contained, and managed in accordance with regulatory requirements. This work is critical to preventing environmental contamination and maintaining certification for dental facilities handling amalgam materials. The contract is designated as a subcontract under NAICS code 541620 and is issued by the Department of Veterans Affairs through the 249-NETWORK Contract Office 9. Performance is required at a location in Mountain Home, Tennessee, with a response deadline of August 14, 2026. The solicitation was posted on August 5, 2026, and while no set-aside type is specified, the focus remains on environmental compliance, verification, and accountability in mercury management practices.

General Info

Comply with EPA and state mercury regulations; third-party verification required for dental waste management in Mountain Home, Tennessee.

Agency

Department Of Veterans Affairs → 249-NETWORK Contract Office 9 (36C249)View Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

Mountain Home, TN, 37684, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 02:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → 249-NETWORK Contract Office 9 (36C249)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Veterans Affairs → 249-NETWORK Contract Office 9 (36C249)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Ensure compliance with EPA and state regulations for mercury discharge from amalgam separators, including documentation or third-party verification.

Similar Contracts

Same NAICS industry code

Integrated Natural Resources Management Plan Update Service

Solicitation # 0000039988

The Contractor is required to provide all necessary labor, equipment, materials, permits, and fees to update the Integrated Natural Resources Management Plan at Camp Roberts and Camp San Luis Obispo in California, with services to be performed between September 2026 and September 2028, adhering strictly to specified technical requirements. The work involves comprehensive natural resources management planning across both military installations to ensure compliance with environmental standards and regulatory obligations. All inquiries concerning this solicitation must be directed to Ash Erickson at Bids@cmd.ca.gov no later than 2:00 PM on August 13, 2026, and bids are due by 2:00 PM on August 21, 2026. The solicitation, numbered 0000039988, was posted on August 6, 2026, and is issued by the California Military Department under the State and Local Government (SLED) category. Proposals must be submitted through the California eProcurement portal with performance centered in Kings, California, and no set-aside provisions are specified for this contract.

California Military Department

POSTED

about 12 hours ago

DEADLINE

Hazard Mitigation Planning Consulting Services

JEFFERSON COUNTY DRAINAGE DISTRICT NO. 6

POSTED

about 14 hours ago

DEADLINE

RFP 26-026/SC Five (5) -Year Update to the Jefferson County Drainage District No. 6 Hazard Mitigation Plan

Solicitation # RFP26-026SC

Jefferson County Drainage District No. 6 is soliciting sealed proposals for a five-year update to its Hazard Mitigation Plan under RFP 26-026/SC, with submissions due by 2:00 PM CDT on August 27, 2026. Proposals must be submitted in original and four hard copies to the Purchasing Department at 6550 Walden Road, Beaumont, Texas 77707, with the proposal number and name clearly marked on the exterior. Late submissions will not be accepted, and all proposals will be publicly opened in the District’s Board Room at the specified time, with only the firm name disclosed to ensure confidentiality during evaluation. Proposers are welcome to attend the opening, and after contract award, proposals will be open for public inspection except for trade secrets and confidential information. Questions must be submitted in writing to Shelby Clodfelter by August 24, 2026, at 1:00 PM CST. The District reserves the right to accept or reject any proposal, waive minor irregularities, and act in its best interest. All contractors and subcontractors must maintain an active SAM.gov registration and cannot be debarred, suspended, or otherwise ineligible for federal assistance programs.

JEFFERSON COUNTY DRAINAGE DISTRICT NO. 6

POSTED

about 14 hours ago

DEADLINE

Toxicity Identification Evaluation (TIE) ServicesThe contract requires the performance of a Toxicity Identification Evaluation (TIE) to determine the specific contaminants responsible for effluent toxicity using standardized EPA TIE protocols across three distinct phases: characterization, identification, and confirmation. The work involves systematic laboratory testing and analytical procedures to isolate, attribute, and verify the toxic agents within wastewater or discharge samples, ensuring compliance with environmental regulatory standards. The subcontractor must apply scientifically validated methods to accurately trace toxicity sources and deliver defensible data supporting remediation or compliance efforts. This subcontract is issued by the City of Stockton under NAICS code 541620 for environmental science and related services, with a response deadline of September 3, 2026. The project is not subject to any set-aside provisions and is intended to support the city's environmental monitoring and water quality management objectives. The place of performance and point of contact details are unspecified, but all work must adhere strictly to EPA TIE guidelines and deliver results that can be used for regulatory reporting or permitting decisions.

City of Stockton

POSTED

about 14 hours ago

DEADLINE

Oil Water Separator with Biological Filter CleaningThe contract involves specialized cleaning of Oil Water Separator units equipped with biological filtration systems, demanding precise handling to preserve the integrity of bio-media and ensure compliance with environmental regulations during removal and disposal. This work requires trained personnel familiar with biological filtration technologies and procedures for safe, non-disruptive cleanout operations to prevent contamination and maintain regulatory standards. All waste materials, particularly the bio-media, must be managed, transported, and disposed of in accordance with applicable environmental laws and guidelines. The opportunity is issued as a subcontract under the Texas Military Department, with the NAICS code 541620 indicating environmental consulting services. The solicitation was posted on August 6, 2026, and responses are due by August 21, 2026. Performance location details are unspecified, but the work is conducted under the auspices of the Texas state agency. Interested parties must access the full solicitation through the provided Texas SmartBuy portal link to review detailed requirements, technical specifications, and submission protocols.

Texas Military Department

POSTED

about 14 hours ago

DEADLINE

Environmental and Site Safety Compliance ServicesThe contract is for Environmental and Site Safety Compliance Services to support construction activities in a sewage environment, requiring the development and execution of comprehensive environmental protection plans, spill prevention measures, waste disposal oversight, and continuous safety monitoring. The work demands strict adherence to protocols designed to mitigate ecological risks and ensure worker safety amid hazardous conditions associated with wastewater infrastructure projects. This subcontract is issued by the Ontario Clean Water Agency under the Government of Ontario, with a NAICS code of 541620 indicating environmental consulting and related services. The opportunity was posted on August 6, 2026, and responses are due by August 31, 2026, at 4:00 PM. Although no specific location or point of contact is provided, performance is expected to occur within the jurisdiction of the agency, covering sites where sewage-related construction operations are underway. The emphasis is on regulatory compliance, risk mitigation, and operational safety during active construction phases.

Ontario Clean Water Agency

POSTED

about 16 hours ago

DEADLINE

Environmental Monitoring and Dust ControlThe contract pertains to the implementation of environmental controls during demolition activities, specifically focusing on dust suppression, air quality monitoring, and erosion prevention to mitigate potential environmental impacts. The work is scoped to ensure compliance with environmental standards through systematic monitoring and proactive measures throughout the demolition process, aiming to safeguard air quality and surrounding ecosystems. Services are to be performed under a subcontract arrangement with a NAICS code of 541620, indicating professional, scientific, and technical services related to environmental consulting and monitoring. The solicitation was posted on August 6, 2026, with a response deadline of September 9, 2026, and is administered by the Georgia State Financing and Investment Commission. Although specific location details are not provided, the place of performance is expected to be within Georgia. The contract does not specify a set-aside type, suggesting it is open to all qualified vendors. Bidders must submit proposals addressing technical capacity, equipment, methodologies for dust and erosion control, and real-time air quality tracking systems to meet the requirements outlined in the solicitation.

Georgia State Financing and Investment Commi

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Environmental Data Management and ReportingThe contract titled Environmental Data Management and Reporting requires the compilation, validation, and ongoing management of hydrogeological and water quality data to support regulatory compliance and environmental assessment efforts. The contractor is responsible for ensuring data accuracy and integrity through systematic collection and verification procedures, with deliverables including a final technical report containing annotated figures, organized tables, and electronic data deliverables formatted to meet all applicable regulatory standards. The work must be completed in alignment with industry best practices for environmental data handling and reporting, with a focus on clarity, traceability, and accessibility for regulatory review. This subcontract, posted on August 6, 2026 by the City of Issaquah in Washington, has a response deadline of August 22, 2026 and is classified under NAICS code 541620, which pertains to environmental consulting services. The place of performance and specific office location are not detailed in the available information, and no set-aside provisions or point of contact are provided. Bidders must be prepared to meet technical requirements for data management and report delivery without explicit guidance on local regulatory frameworks, implying a need for independent interpretation of applicable state and federal environmental standards.

City of Issaquah

POSTED

about 18 hours ago

DEADLINE

Hydrogeological Testing and Pumping AnalysisThe City of Issaquah is seeking a subcontractor to perform hydrogeological testing on Wells 4 and 5, including step-drawdown and sustained pumping tests to evaluate well capacity, aquifer response, and sustainable yield. The work requires detailed analysis of drawdown and recovery data to determine the hydraulic properties of both shallow and deep aquifers, providing critical information for water resource management and long-term well performance. All testing must be conducted with precision to ensure accurate characterization of aquifer behavior under varying pumping conditions. The contract, classified under NAICS code 541620 for scientific consulting services, is posted with a response deadline of August 22, 2026. The work is expected to be performed at the location of the wells within the City of Issaquah, Washington, although specific site coordinates are not provided. This subcontract opportunity is open to qualified providers capable of delivering professional hydrogeological field testing and data interpretation services in compliance with industry standards and regulatory expectations for groundwater assessment.

City of Issaquah

POSTED

about 18 hours ago

DEADLINE

Permitting and Certification Services

Department of Veterans' Affairs

POSTED

about 18 hours ago

DEADLINE

Environmental and Regulatory Permitting SupportThe contract titled Environmental and Regulatory Permitting Support requires the vendor to assist with environmental and regulatory permitting activities by coordinating closely with key state agencies including the Rhode Island Department of Environmental Management, the Rhode Island Coastal Resources Management Council, the Office of the State Fire Marshal, and the Quonset Development Corporation. The primary responsibility involves preparing and submitting all necessary documentation to ensure full compliance with applicable environmental and safety regulations. This subcontract supports critical infrastructure or development projects by facilitating timely approvals and maintaining regulatory alignment. The solicitation was posted on August 6, 2026, with a response deadline of September 3, 2026, and falls under NAICS code 541620 for environmental consulting services. The awarding agency is the State of Rhode Island, operating through its Rhode Island office, with performance expected within the state. The contract opportunity is accessible via the Rhode Island Department of Transportation’s vendor bidding portal.

State of Rhode Island

POSTED

about 18 hours ago

DEADLINE

Environmental Site Assessment and Monitoring

City of Bellevue

POSTED

about 18 hours ago

DEADLINE

More opportunities from Department Of Veterans Affairs → 249-NETWORK Contract Office 9 (36C249)

Same awarding agency

S214--Carpet Cleaning Service

Solicitation # 36C24926Q0344

The carpet cleaning service solicitation, identified as S214 with solicitation number 36C24926Q0344, is a total small business set-aside under NAICS code 561740, managed by the Department of Veterans Affairs through the 249-NETWORK Contract Office 9 located in Murfreesboro, Tennessee. The contract seeks vendors to provide cleaning services across a complex facility including 86 office rooms and nine outbuildings, each containing between six and eight rooms, with all outbuildings spanning two floors. The main hospital building, numbered 160, has four floors, while other areas of the hospital range from one to three floors. Responses are due by August 12, 2026, and the opportunity is open to small businesses as defined by the Small Business Administration, with the primary point of contact being Contract Specialist Christina Lawrence at christina.lawrence2@va.gov.

Carpet and Upholstery Cleaning Services

POSTED

about 23 hours ago

DEADLINE

Installation and Integration of Dental Vacuum SystemThe contract entails the complete on-site installation, plumbing, electrical hardwiring, and commissioning of a dental vacuum system within an active clinical setting, requiring seamless integration without interrupting daily operations or causing any downtime. The work must be performed with precision and minimal disruption to ensure uninterrupted patient care, demanding advanced coordination, specialized skills, and strict adherence to medical facility protocols. All components must be properly configured, tested, and certified to meet operational standards upon final commissioning. This subcontract, categorized under NAICS code 238220 for plumbing, heating, and air-conditioning contractors, is issued by the Department of Veterans Affairs through the 249-NETWORK Contract Office 9, with performance required at the Mountain Home location with ZIP code 37684. The solicitation was posted on August 5, 2026, and responses are due by August 14, 2026, at 2:00 PM. The project emphasizes compliance, reliability, and continuity in a high-stakes healthcare environment where system failure is not an option.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Supply and Delivery of Dental Vacuum Compressor and Amalgam Separator SystemThe contract requires the supply and delivery of a manufacturer-approved dental vacuum compressor equipped with an integrated amalgam separator, designed to support multiple dental chairs within a VA medical facility located in Mountain Home, Tennessee. The system must effectively filter mercury and other hazardous materials from dental wastewater, ensuring compliance with environmental and health safety standards. The equipment must be fully compliant with industry specifications and approved by the original equipment manufacturer to guarantee performance, durability, and compatibility with existing dental infrastructure. The procurement is classified as a subcontract under NAICS code 339114, and bids must be submitted by the deadline of August 14, 2026, with the solicitation posted on August 5, 2026. The contract is managed by the Department of Veterans Affairs through the 249-NETWORK Contract Office 9, with performance taking place exclusively at the Mountain Home facility. While no set-aside provisions are specified, the supplier must meet all technical, operational, and regulatory requirements to ensure safe and efficient amalgam separation and vacuum system functionality in a high-volume clinical environment.

Dental Equipment and Supplies Manufacturing

POSTED

DEADLINE

R425 Job Order Contract TVHS

Solicitation # 36C24926Q0235

This is a combined synopsis and solicitation for commercial facility support services issued as a Request for Quotation under the authority of FAR Part 12, with no separate written solicitation to be issued. The acquisition is exclusively set aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSBs), and all offerors must verify their SDVOSB status through the Small Business Administration’s certification portal at the time of submission and award. The North American Industry Classification System code is 561210, which corresponds to Facilities Support Services with a corresponding SBA size standard. The solicitation number is 36C24926Q0235, and responses are due by August 20, 2026, at 4:00 PM Eastern Time. The contracting office is the 249-NETWORK Contract Office 9 within the Department of Veterans Affairs, located in Murfreesboro, Tennessee, with performance expected to occur in the same location. The primary point of contact for inquiries is Diane Ziegler, reachable via email or phone provided in the contract data. All provisions and clauses are incorporated by reference and can be accessed electronically through www.acquisition.gov. No additional contract clauses, attachments, evaluation factors, performance specifications, or special requirements were provided in the available documentation, and details regarding pricing, contract value, inspection criteria, or administrative data are not included in the submitted information.

Facilities Support Services

POSTED

DEADLINE

J041-- AHU Repairs Alvin C York VAMC

Solicitation # 36C24926Q0345

This is a sources sought announcement issued by the Department of Veterans Affairs, Network Contracting Office 9, for market research purposes related to the refurbishment of nine air handling units at the Alvin C. York VA Medical Center in Murfreesboro, Tennessee. The purpose is to identify qualified small businesses capable of performing comprehensive inspections, cleaning, coil restoration, structural reinforcement, and sealing of AHUs to meet NFPA 90A, ASHRAE, OSHA, and VA Engineering and Environment of Care standards. The work involves addressing aging equipment, corrosion, water leaks, and fire code compliance across nine specific units located in multiple buildings on campus, with critical tasks including the application of SealTech epoxy flooring, antimicrobial topcoats, fire barriers, and environmentally friendly probiotic foam for coil sanitization. All activities must be scheduled during weekday hours from 8 a.m. to 4 p.m., require coordination with facility maintenance staff to ensure uninterrupted patient care, and necessitate strict adherence to lockout/tagout, confined space, and hot work safety protocols. Respondents must demonstrate a minimum of five years of direct experience with air handling unit refurbishments and be registered in the System for Award Management (SAM.gov), with Service-Disabled Veteran-Owned Small Businesses and Veteran-Owned Small Businesses encouraged to respond given this is a total small business set-aside under NAICS code 238220, with no anticipated subcontracting. The announcement explicitly states no obligation to award a contract, and responses will not be reimbursed or compensated. If awarded in the future, the successful contractor would be required to provide a ten-year warranty covering all materials, labor, and workmanship, with a 24-hour response time for critical failures affecting operations and 72 hours for non-critical issues. Deliverables include detailed documentation such as installation reports, pressure drop and ATP testing results, safety plans, and a final commissioning report; all work must be completed on-site with no off-site delivery or FOB terms applicable. Responses must be submitted via email to Shania Kimbrough by August 12, 2026, at 3:00 p.m. CST, and telephone responses are not accepted.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Brand Name or Equal DCI Edge Series 5 Operatory Light

Solicitation # 36C249Q0324

The contract is for the acquisition of a Brand Name or Equal DCI Edge Series 5 Operatory Light under solicitation number 36C249Q0324, issued by the Department of Veterans Affairs through the 249-NETWORK Contract Office 9 located in Murfreesboro, Tennessee. This procurement is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) as defined under FAR 19.14, ensuring prioritized eligibility for qualified small businesses owned by veterans with service-related disabilities. The North American Industry Classification System (NAICS) code 339114 applies to this medical equipment procurement, indicating its focus on manufacturing surgical and medical equipment. The item is required for performance at Mountain Home, Tennessee, with a posted date of August 5, 2026, and a response deadline of August 18, 2026, at 3:00 PM Eastern Time. The primary point of contact is Larry Olive, reachable at 615-225-2475 or larry.olive@va.gov, with Carmen Hanczyk as the secondary contact at 615-225-5973 or carmen.hanczyk@va.gov. Interested parties must submit proposals through the official SAM.gov portal linked in the solicitation, adhering strictly to the SDVOSB set-aside requirements to qualify for award consideration.

Dental Equipment and Supplies Manufacturing

POSTED

DEADLINE

6520--Notice of Intent to Sole Source - Dental Vacuum Compressor - Emergency

Solicitation # 36C24926Q0346

The Department of Veterans Affairs, Network Contracting Office 9, intends to award a sole source, firm-fixed price contract to Patterson Dental for an emergency replacement of a failed Dental Vacuum Compressor system at the James H. Quillen VAMC in Mountain Home, Tennessee. The system, an Amalgam Separator with multiple vacuums, is critical for filtering mercury-containing particles from dental wastewater and maintaining operational safety in the clinic. Current equipment, over 450 pounds and permanently installed, has reached end-of-life with no available repair parts, leaving the clinic vulnerable to complete shutdown if the single functional vacuum fails. The requirement is deemed urgent due to direct impact on patient care, and market research confirms that only Air Techniques manufactures the exact system needed, with no viable alternatives that meet the technical and operational specifications under the emergency timeline. The contract will be awarded under FAR 12.102(a) and has a planned award date no later than August 24, 2026, with a 90-day performance period. Interested parties may submit written proposals by August 14, 2026, at 10 a.m. Eastern Time to demonstrate their capability to meet the requirement, though the government reserves full discretion to proceed without competition. All submissions must include an authorized distributor letter from the manufacturer and evidence of SAM registration. Responses must be sent via email to Ryan Mick, Contracting Specialist, with the specific subject line referencing the solicitation number, and must contain detailed technical and business documentation proving the ability to supply, install, and support the exact system. No costs incurred in responding will be reimbursed, and all submissions become government property. The solicitation number is 36C24926Q0346, NAICS code is 339114, and the product service code is 6520. This notice is not a solicitation, and responses will be used solely to determine whether competitive procedures are warranted.

Dental Equipment and Supplies Manufacturing

POSTED

DEADLINE

UID (Unique Item Identification) Marking ServicesThe contract requires the application of permanent, CensiTrac-compliant Unique Item Identification (UID) markings on surgical instruments using durable marking methods such as laser or dot peen engraving to ensure reliable asset tracking across the Department of Veterans Affairs’ supply chain. These markings must meet strict federal UID standards to enable accurate inventory management, maintenance tracking, and lifecycle monitoring of surgical assets used in VA healthcare facilities. The work is expected to be performed in Lexington, Kentucky, with a submission deadline of August 17, 2026, and is classified as a subcontract under NAICS code 332992, which covers other fabricated metal product manufacturing. The contracting office is the 249-NETWORK Contract Office 9 (36C249) within the Department of Veterans Affairs, and the requirement is open to qualified subcontractors capable of delivering high-precision, compliant marking services in compliance with government-specific technical and documentation standards.

Small Arms Ammunition Manufacturing

POSTED

DEADLINE

Domestic Manufacturing and Supply Chain ComplianceThe contract requires full domestic manufacturing and supply chain compliance to meet the Buy American Act and Department of Veterans Affairs sourcing regulations, ensuring all products are entirely produced within the United States with complete transparency and documented proof of origin. No components or materials sourced from Pakistan are permitted at any stage of production or assembly, and all suppliers and subcontractors must provide verifiable documentation to confirm U.S. origin and adherence to federal procurement standards. The performance location is designated as Lexington, Kentucky, with the 249-NETWORK Contract Office 9 under the Department of Veterans Affairs overseeing compliance. This subcontract opportunity is open for submission until August 17, 2026, with a posting date of August 4, 2026, under NAICS code 339112, which pertains to surgical and medical instrument manufacturing. Applicants must demonstrate the ability to maintain an auditable, traceable supply chain from raw materials through final assembly, ensuring every component meets the stringent requirements of federal procurement law. Failure to comply with domestic content mandates or to provide clear documentation of origin will result in disqualification, and all offerings must be free from any Pakistani-derived inputs regardless of tier or function in the supply chain.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Sterile Packaging and Shipping of Instrument TraysThe contract requires the provision of sterile, damage-resistant packaging and shipping services for neurosurgical and ophthalmic instrument trays to ensure they are delivered to the VA facility in Lexington, Kentucky, free from contamination. The packaging must be engineered to maintain sterility throughout transit and withstand physical stress to prevent compromising the integrity of the instruments, with strict adherence to medical-grade standards for cleanliness and protection. This subcontract supports critical medical operations by guaranteeing that surgical tools arrive in fully functional, aseptic condition, directly impacting patient safety and procedural outcomes at the VA facility. The solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026, and falls under NAICS code 326199 for other plastics product manufacturing, indicating the need for specialized plastic-based packaging solutions. The contracting office is the 249-NETWORK Contract Office 9 (36C249) under the Department of Veterans Affairs, with performance located at the Lexington site. The subcontract nature suggests the work may be performed by a third-party vendor supporting a prime contractor, and no set-aside provisions are indicated, meaning all eligible businesses may compete. The focus remains solely on the reliability of packaging and logistics to meet healthcare delivery requirements.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Micro Instrument Tray Supply – Ophthalmic SetThe contract calls for the supply of a micro instrument tray containing ophthalmic instruments fabricated from surgical-grade stainless steel, designed to meet or exceed the performance, quality, and specifications of established brand-name products under FAR 52.211-6. The instruments must be precision-engineered for use in sensitive eye surgeries, ensuring durability, corrosion resistance, and compatibility with standard sterilization protocols. The requirement is issued as a subcontract under NAICS code 339112, targeting medical device manufacturers capable of delivering FDA-compliant, high-accuracy surgical tools that align with clinical standards. The solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026, and the place of performance is identified as Lexington with a zip code of 40502. The contracting office is the 249-NETWORK Contract Office 9 (36C249) under the Department of Veterans Affairs, indicating the end use is within the VA healthcare system. While no set-aside designation is specified, the procurement emphasizes adherence to stringent quality benchmarks and does not permit deviation from the required material or performance standards. All proposals must demonstrate proven capability in producing surgical-grade micro-instrument trays without reliance on branded equivalents.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Micro Instrument Tray Supply – Neurosurgical SetThe contract obligates the supplier to provide a micro instrument tray specifically designed for neurosurgical procedures, composed entirely of surgical-grade stainless steel to ensure durability, corrosion resistance, and compatibility with repeated sterilization cycles. The tray must fully comply with the VHA Sterile Processing Services Directive 1116 and all established reprocessing standards to guarantee patient safety and operational consistency within Veterans Affairs healthcare facilities. All components must be engineered for precision, functionality, and ergonomic handling during delicate neurosurgical interventions. The solicitation is classified as a subcontract under NAICS code 339112, indicating it pertains to surgical and medical instrument manufacturing. It is managed by the 249-NETWORK Contract Office 9 within the Department of Veterans Affairs, with performance required at a location in Lexington, Kentucky, zip code 40502. The opportunity was posted on August 4, 2026, and responses are due by August 17, 2026, at 8:00 AM. No set-aside designation is specified, meaning the contract is open to all qualifying vendors without preference based on business size or ownership characteristics.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE