This Subcontract opportunity from Virginia was posted on January 26, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Epoxy Coating and Surface Preparation Services

Closed

State & Local

Submission Closed02/12/2024, 07:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238290

New

ACT-1033-01 NAS Perimeter Door Replacement Bldg. 300 at the William J. Hughes Technical Center, Atlantic City, NJ

Solicitation # act-1033-01-nas-perimeter-door-replacement-bldg-300-william-j-hughes-technical-center-atlantic-city

This contract, solicitation number act-1033-01-nas-perimeter-door-replacement-bldg-300-william-j-hughes-technical-center-atlantic-city, involves the provision and installation of two sets of interior commercial door assemblies at the NAS laboratory facility, Building 300, located within the WJ Hughes Technical Center at Atlantic City International Airport in New Jersey. The scope of work encompasses the replacement of existing doors as well as necessary modifications, reframing, and finishing of the existing metal stud gypsum wall board door openings. The estimated magnitude of construction for this project is between 250,000 and 500,000 dollars. This opportunity is set aside for small businesses, including certified veteran-owned, service-disabled veteran-owned, women-owned, and HUBZone small businesses. Managed by PTSI Managed Services Inc., the solicitation was posted on November 10, 2026, with a response deadline of November 18, 2026.

PTSI Managed Services Inc.

POSTED

DEADLINE

Centennial JCC Panic Hardware Services (Electrical Room Egress Doors)

Solicitation # Panic Hardware (Electrical Room Egress Doors)

Management & Training Corporation is soliciting bids for the installation of Grade I commercial-grade panic hardware on electrical room egress doors at the Centennial Job Corps Center in Nampa, Idaho. The scope of work includes conducting site surveys, procuring heavy-duty panic bars, exterior trim, rim cylinders, strikes, and door closers, and performing installation and testing across five specific locations: the Cafeteria, Men's Dorm, Women's Dorm, Recreation, and Vocational buildings. All work must adhere to NEC 2023 Article 110.26(C)(3), NFPA 101 Life Safety Code, and ADA standards, with a requirement for at least 10 consecutive cycle tests to ensure fail-safe operation. This is a fee-for-service solicitation set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certifications under NAICS code 238290. Qualified bidders must be licensed in the State of Idaho, provide three references for similar projects, and submit a lump sum price along with a completed supplier packet including a W-9 and UEI number. Proposals are due by December 1, 2026, at 3:00pm MST. The contract is subject to various federal regulations, including the Davis-Bacon Act for prevailing wages, FAR clauses regarding small business utilization and safety standards, and Department of Labor requirements for paid sick leave and records management.

Management & Training Corporation/Centennial Job Corps Center

POSTED

DEADLINE

PEM Board Installation, Programming, and TestingThis subcontract involves the installation, programming, and testing of PEM boards for escalator projects managed by the Birmingham Airport Authority. The scope of work requires the removal of existing boards and the electrical connection of seven upgraded boards, specifically utilizing specialized programming interfaces for Schindler 9300 systems. The contractor is responsible for executing all necessary software updates to ensure the escalators are fully operational and providing the required verification documentation upon completion. To perform these services, personnel must undergo a background check and obtain a BAA security badge. The project falls under NAICS code 238290, with a response deadline set for December 4, 2026.

Birmingham Airport Authority

POSTED

DEADLINE

Contract for the Execution of Fire Safety Works

Solicitation # CCS/26/235

The City and County of Swansea is seeking a contractor to execute fire safety works across various properties in Swansea, including fireproofing and fire-prevention installation. The project covers multiple locations such as Clyne Court, Griffith John Street, Matthew Street, Rheidol Court, Jeffreys Court, Gloucester House, Conway Court, Maes Y Efail, Cartersford Place, Heol Y Wern, Llanllienwen Close, Plas Melyn, and Waverley Close. The estimated contract value is 1,400,000 GBP excluding VAT, or 1,680,000 GBP including VAT, with a projected performance period from February 1, 2027, to September 30, 2027. The solicitation, numbered CCS/26/235, requires all works to comply with CDM Regulations 2015. Award decisions will be based on a weighted evaluation consisting of price (60%) and several quality factors, including technical capability (10%), project specifics (8%), CDM Regulations (8%), supply chain management (6%), stakeholder engagement (4%), and a Beyond Bricks and Mortar metric (4%). Interested parties must submit their proposals via the eTenderWales portal by the deadline of November 27, 2026, at 12:00pm, using ITT - 127749 for the search.

City & County of Swansea

POSTED

DEADLINE

Dike B Generator Installation, Mansfield Hollow Dam, Mansfield Center, CT

Solicitation # W912WJ27QA001

The U.S. Army Corps of Engineers New England District is soliciting quotes for the construction and commissioning of a new power system for the Dike B Operator unit at Mansfield Hollow Dam in Mansfield Center, Connecticut. This fixed-price project, estimated between 25,000 and 100,000 dollars, is a total small business set-aside under NAICS code 238290. The scope of work includes comprehensive site preparation, the construction of a 20 by 20 foot reinforced concrete generator pad with a gravel foundation, and the installation of secure perimeter fencing. The contractor is responsible for procuring and installing a standalone 15kW propane-powered generator and fuel storage tank, as well as completing all electrical connections and integration into the existing control panel and sluice gate operator unit. The period of performance is 300 days from the Notice to Proceed, with work permitted Monday through Friday from 7:00 AM to 3:30 PM. All work must adhere to EM 385-1-1 safety standards and IEEE C2 grounding standards. To be considered responsive, vendors must maintain an active SAM.gov registration, submit a mandatory solicitation survey detailing their experience and certifications, and provide signed copies of all material amendments. Award will be based on a comparative evaluation of technical capability, past performance from the last three years, and price reasonableness. Payments will be processed electronically through the Wide Area WorkFlow system.

W2SD Endist New England

POSTED

DEADLINE

Construction Services for replacing the wire ropes and designated associated sheave blocks, Franklin, New Hampshire.

Solicitation # W912WJ27X1CX1

The U.S. Army Corps of Engineers, New England District, is seeking capabilities statements for a construction project to replace the wire ropes and associated sheave blocks for the number 1 service gate at the Franklin Falls Dam in Franklin, New Hampshire. The scope of work involves installing 1,085 linear feet of 1-inch stainless steel wire rope meeting US Steel Manufacture Requirements with a minimum breaking strength of 100 tons, as well as replacing five lower sheave block assemblies including pins, bushings, and various plates. All work must adhere to ASME B30 standards and industry standards for Load Handling Equipment, specifically following specification sections 35 01 70.13 and 35 20 16.53. The project is estimated to cost between $350,000 and $500,000, with solicitation planned for Spring 2027 and construction beginning in the Spring or Summer of 2027. This Sources Sought Announcement is intended to determine the availability and capability of small businesses, including 8(a), HUBZone, Service-Disabled Veteran-Owned, and Women-Owned concerns, under NAICS code 237990. Interested firms must submit a capabilities package by November 25, 2026, including business classification, proof of bonding capability, and two examples of similar work performed within the last seven years.

W2SD Endist New England

POSTED

DEADLINE

Elevator Removal and InstallationThis subcontract opportunity involves the removal of an existing four-stop elevator and the installation of a complete new system at a State University of New York Cobleskill facility. The scope of work includes the removal of old components and the installation of new rails, cabs, motors, and control systems, concluding with full testing and commissioning to deliver a fully operational system. Eligible bidders must hold a New York State Licensed Elevator Contractor certification. The solicitation was posted on November 10, 2026, with a response deadline of December 8, 2026. This project falls under NAICS code 238290 and is intended for prime contractors managing facility projects for the agency.

State University of New York (SUNY)

POSTED

DEADLINE

Building Automation Systems (BAS) IntegrationThis subcontract involves the installation and configuration of Building Automation Systems for prime contractors working on UNC System Office projects located at North Carolina Central University. The scope of work includes the installation of BAS controllers and sensors, as well as the execution of software integration necessary to manage energy usage and the overall building environment. The ultimate goal of the contract is the delivery of a fully integrated and commissioned system. The project falls under NAICS code 238290 and is managed by the UNC System Office in North Carolina. Interested parties should note that the solicitation was posted on November 10, 2026, with a response deadline set for December 1, 2026.

POSTED

DEADLINE

Elevator InstallationThis subcontract opportunity involves the supply and installation of elevator systems for prime contractors working on facility projects for the New York State Division of Military and Naval Affairs. The selected provider will be responsible for the complete delivery of operational elevator systems, including the necessary installation and formal certification processes. The project falls under NAICS code 238290 and is managed by the state of New York. Interested parties should note that the solicitation was posted on November 10, 2026, with a response deadline set for November 18, 2026.

POSTED

DEADLINE

Elevator Upgrades in Pearson Hall

Solicitation # 2140612

The State University of New York at Cobleskill is seeking a responsive and responsible contractor for the removal and replacement of a 4-stop elevator at Pearson Hall, located at 114 Suffolk Circle, Cobleskill, New York. The comprehensive scope of work encompasses general construction, hazardous materials remediation, plumbing, mechanical, and electrical work. All project activities must be completed by September 16, 2027. Bids must be submitted in duplicate by 2:00 p.m. local time on December 8, 2026, to the Mackey Services Building. Each bid requires a security deposit of at least 5% of the total bid amount. The procurement includes specific socioeconomic goals, requiring 15% participation for both Minority Business Enterprises (MBE) and Women Business Enterprises (WBE), and 6% for Service-Disabled Veteran-Owned Businesses (SDVOB). Primary coordination is managed by Facilities Operations Manager Brett Loder and Capital Program Coordinator Donna Ackerman.

State University of New York (SUNY)

POSTED

DEADLINE

Replacement of exterior and interior ADA Door Openers

Solicitation # SRC0000042837

The Ohio Department of Veterans Services is seeking bids for the replacement of interior and exterior ADA door openers at the Vets Hall Smoke House located in Sandusky, Ohio. The project requires the removal and replacement of door openers, outside posts, and the installation of matching wired ADA push plates and associated wiring. All work must be performed by OEM trained or certified personnel and must comply with the Ohio Building Code, OSHA standards, and the Americans with Disabilities Act. This solicitation is set aside for Minority Business Enterprises and Encouraging Diversity, Growth and Equity vendors. Interested bidders must attend a mandatory site visit on November 12, 2026, at 10:00 am at the Vets Hall Main Entrance to remain eligible for award. Quotes must be submitted via OhioBuys on company letterhead by November 24, 2026, and must include a detailed price breakdown for labor, materials, and trip charges, with a final total provided in the grid lines. The contract will be awarded to the lowest responsive bidder who can provide the earliest starting date. Payments will be made via electronic funds transfer within 30 calendar days of receiving a proper invoice.

Dvs102555 Plant Operations And Main Ovhs

POSTED

DEADLINE

Site Setup, Installation, and Commissioning ServicesThis subcontract for Site Setup, Installation, and Commissioning Services involves providing physical installation, site assessment, and operational verification for training equipment projects on behalf of prime contractors. The scope of work includes conducting site readiness assessments, delivering and installing complete systems at training facilities, and performing comprehensive system testing to ensure full functionality. The selected provider will be responsible for delivering fully commissioned and operational training systems, supported by detailed handover documentation such as calibration records and installation certificates. This project is issued by the City of Tshwane for performance in Tshwane-Pretoria, South Africa, with a response deadline of November 24, 2026.

City of Tshwane

POSTED

1 day ago

DEADLINE

in 13 days

AI Contract Overview

The City of Richmond Government in Virginia is seeking a subcontractor for epoxy coating and surface preparation services. The scope of work involves the application of Chesterton ARC 858/855 protective epoxy coatings on pump and gearbox components. This process requires professional surface preparation through abrasive blasting adhering to SSPC-SP5 and SP7 standards, as well as rigorous quality control to ensure proper film thickness. This opportunity was posted on January 26, 2024, with a response deadline of February 13, 2024. The project falls under NAICS code 238290 and is managed through the City of Richmond's procurement system.

General Info

Agency

Virginia → City of Richmond Government

NAICS

238290 - Other Building Equipment Contractors

Place of Performance

VA, USA

Set-Aside

NONE

Documents

This scope was carved out of 240002529.

The full solicitation package (6 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Annual Pump Gearbox, Blower Repair and Maintenance

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJan 26

subcontract

Response DeadlineFeb 12

Deadline has passed

Submission Closed

02/12/2024, 07:00:00 PM EST

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyVirginia → City of Richmond Government

ContactsNo contacts available

OfficeN/A

Organization / AgencyVirginia → City of Richmond Government

Office AddressN/A

ContactsNo contact information available

Full Description

Surface preparation and application of protective epoxy coatings (Chesterton ARC 858/855) on pump and gearbox components, including abrasive blasting to SSPC-SP5/SP7 standards and QC for film thickness.