Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Exhibit Lighting and Electrical Systems Installation

Active

Federal

Response Deadline08/14/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract covers the installation of interior case lighting, ambient exhibit lighting, and low-voltage electrical systems designed to protect artifacts while ensuring compliance with NFPA 70 standards. All materials and methods must be artifact-safe, prioritizing long-term preservation by minimizing heat, ultraviolet exposure, and other potential damage. The work is scoped for performance at a location in Silver Spring, Maryland, with a zip code of 20910, and requires adherence to strict electrical safety and conservation protocols to meet the unique needs of sensitive museum or archival environments. This is a subcontract solicitation marked as a Small Business Set Aside under NAICS code 238210, reserved exclusively for small businesses. It was posted on July 30, 2026, with responses due by August 14, 2026, at 2:00 PM Eastern Time. The contracting activity falls under the Defense Health Agency within the Department of Defense, indicating the lighting systems will support a federal facility likely housing medical historical collections or similar artifact-based exhibits. The bid process is conducted through SAM.gov, and bidders must ensure full compliance with both technical specifications and small business eligibility requirements.

General Info

Small business subcontract for artifact-safe lighting and low-voltage systems in Silver Spring, Maryland, under DHA, due August 14, 2026.

Agency

Department Of Defense → Defense Health AgencyView Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

Silver Spring, MD, 20910, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 02:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Health Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Health Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of interior case lighting, ambient exhibit lighting, and low-voltage electrical systems using materials safe for artifacts and compliant with NFPA 70.

Similar Contracts

Same NAICS industry code

Elevator Lobby 2 Way CommunicationsThe contract involves the installation of 23 new two-way communication boxes in elevator lobbies across the terminal, including 17 passenger elevators, three service elevators, and three ramp landing elevators. This work is part of a broader effort to enhance emergency communication infrastructure within the airport facility and is being managed by the Aviation Project Management Group under the Port of Seattle. The project is forecasted with a posting date of July 31, 2026, and falls under NAICS code 238210, indicating it pertains to electrical contracting services. Primary point of contact is Angela Peterson, with Christina Burdett serving as the project manager, and all correspondence should be directed through the provided email addresses and phone numbers. The work location is at the Port of Seattle facility, though specific city or state details are not provided in the data.

Aviation Project Management Group

POSTED

about 24 hours ago

DEADLINE

Variable Frequency Drives (VFD) Replacement Phase 3 (DBB)The Port of Seattle will replace 125 aging Robicon variable frequency drives (VFDs) with new equipment as part of Phase 3 of its VFD Replacement initiative. This effort aims to upgrade outdated infrastructure to ensure system reliability and improve operational efficiency across aviation facilities and infrastructure. The new VFDs will be fully integrated with the Port’s Direct Digital Controller (DDC) system to enable real-time energy usage monitoring, output control readings, and efficiency tracking, enhancing the Port’s ability to manage power consumption and maintain optimal performance. The scope includes all necessary wiring, testing, commissioning, and installation of associated equipment required to deliver a fully functional and synchronized system. The work falls under NAICS code 238210 and is managed by the Aviation Facilities & Infrastructure division, with technical oversight from Project Manager Sharon Miick and primary point of contact Yanet Maldonado. Although the solicitation number and set-aside details are not specified, the forecast was posted on July 31, 2026, signaling upcoming procurement activities. The project is critical for modernizing the Port’s electrical infrastructure and supporting long-term sustainability goals through precise control and monitoring of motor-driven systems. All work must be performed on-site at the Port’s facilities, with full accountability for system integration, performance validation, and operational readiness upon completion.

Aviation Facilities & Infrastructure

POSTED

about 24 hours ago

DEADLINE

Operational Security Cameras Bagwell and North Cargo AreasThe contract requires the provision of design, permitting, and construction services to install 50 high-resolution cameras across 43 sites in the Bagwell and North Cargo Operations areas of the Port of Seattle. The primary objective is to enhance security and enforcement capabilities by replacing outdated systems with improved coverage, specifically targeting main terminal drive lanes and entrances previously unmonitored, with the goal of supporting forensic investigations and adherence to port movement rules. In the Bagwell area, the new cameras will shift focus from conveyor systems and security doors to critical transit corridors, while the North Cargo operations will benefit from flexible, user-controlled Pan Tilt Zoom units that provide broad surface area monitoring and dynamic viewing capabilities to address operational gaps. All work must be completed in accordance with specified technical and operational standards to ensure seamless integration with existing security infrastructure. The project is managed by the Aviation Project Management Group under the Port of Seattle, with primary point of contact Angela Peterson and Project Manager Randa Williams available for coordination. The North American Industry Classification System code 238210 identifies this as a specialty trade contracting effort focused on electrical and communication system installation. Although the solicitation has not yet been formally issued, the forecasted posting date is July 31, 2026, indicating this is a forward-looking opportunity for qualified contractors to prepare proposals. The place of performance is within the Port of Seattle’s operational boundaries, and all contractors must be prepared to navigate port-specific logistics, security protocols, and environmental constraints during installation and commissioning.

Aviation Project Management Group

POSTED

about 24 hours ago

DEADLINE

Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement (Re-bid)The Port of Seattle’s Aviation Project Management Group is planning to replace the existing Aqueous Film Forming Foam (AFFF) fire suppression system at the Rental Car Facility located in SeaTac with a full dry chemical system to eliminate contamination from per- and polyfluoroalkyl substances (PFAS). The project entails the complete removal of the current foam-based system, including all contaminated components such as tanks, piping, and sprinkler heads, followed by the design and installation of a new dry system comprising new storage tanks, control valves, pumps, sprinkler lines, and sprinkler heads, along with reserve tanks for system integrity. The new system must be fully integrated with the facility’s existing Fire Alarm System to ensure seamless operation and compliance with safety protocols. The work is classified under NAICS code 238210 and is being advertised as a re-bid under the title Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement, targeting an efficient and timely execution to minimize service disruption. Primary point of contact for inquiries is Todd Rehm, with Pat Nakamura serving as the Project Manager.

Aviation Project Management Group

POSTED

about 24 hours ago

DEADLINE

Parking Garage UPSThe contract involves the demonstration and full replacement of the existing uninterruptible power supply (UPS) system in a parking garage that supports critical operations including ticketing kiosks and automated gates. The scope includes installing new UPS equipment along with associated electrical infrastructure such as subpanels, feeders, disconnects, and circuit breakers to ensure reliable backup power. The new UPS system will feature integrated data connections to enable remote alarm monitoring and system diagnostics, enhancing operational awareness and response capabilities. All work will be performed at the Port of Seattle’s parking facility, under the oversight of the Aviation Project Management Group. The project is forecasted to be released on July 31, 2026, with no set-aside provisions indicated and NAICS code 238210 specifying electrical contracting services. Primary point of contact is Yanet Maldonado, reachable via email and phone, with JJ Jordan serving as the project manager for coordination and technical inquiries. All work must comply with the operational and safety standards required by the Port of Seattle, and performance is expected to be completed at the designated parking garage location without specified alternative sites.

Aviation Project Management Group

POSTED

about 24 hours ago

DEADLINE

Electrical Unit Price Portwide 2026_1 and _2This contract encompasses a broad range of electrical services to be performed across multiple Port of Seattle facilities including Seattle-Tacoma International Airport, maritime properties, and surrounding areas. The work includes but is not limited to the installation of raceways, wiring, medium voltage cabling, electrical boxes, transformers, temporary power and lighting systems, grounding, and associated testing, all in full compliance with applicable codes and regulations. The Contractor is responsible for providing all labor, tools, equipment, materials, and incidentals required to complete tasks as directed through Work Authorizations issued by the Port. Labor must be delivered according to the specified classifications outlined in the Schedule of Unit Prices, ensuring consistent pricing and accountability. The Port of Seattle anticipates a high volume of small-scale electrical projects over the coming year and plans to award two separate contracts under this solicitation to ensure sufficient capacity and rapid response times. The goal is to maintain operational continuity and meet dynamic project demands by leveraging two qualified contractors. The contract is identified under the NAICS code 238210 and is issued through Port Construction Services, with primary coordination handled by Heather Bowden and Lesley Miles. All work must be performed at designated Port-wide locations, and contractors are expected to adhere strictly to the terms and pricing structure detailed in the bid documents.

Port Construction Services

POSTED

about 24 hours ago

DEADLINE

Electrical Installation and WiringThe contract titled Electrical Installation and Wiring is a subcontract issued by the City of Dunwoody in the state of Georgia under NAICS code 238210, which classifies it as electrical contracting work. It encompasses the full installation of electrical systems including conduits, wiring, outlets, and lighting fixtures, requiring qualified professionals to execute the scope in compliance with applicable codes and standards. The solicitation was posted on July 30, 2026, with a response deadline of August 31, 2026, at 7:00 PM, leaving bidders a limited window to submit proposals. The place of performance and specific location details are not provided, indicating that the exact project site within Dunwoody may be determined post-award. The opportunity is not designated for any specific set-aside program, making it open to all eligible subcontractors. Interested parties must access the official portal via the provided link to obtain detailed requirements and submit responses.

City of Dunwoody

POSTED

DEADLINE

in about 1 month

Perimeter Security and Intrusion DetectionThe contract titled Perimeter Security and Intrusion Detection involves the supply and installation of a comprehensive security system for the Dekalb County School District in Georgia, including motion sensors, door and window alarms, glass break detectors, and perimeter fencing integrated with an alarm system. The work is classified under NAICS code 238210, indicating it is a subcontract related to electrical and other construction installation services, and is intended to enhance the physical security infrastructure of school facilities. The solicitation was posted on July 30, 2026, with a response deadline of August 27, 2026, providing interested vendors a four-week window to submit proposals. The place of performance is within the school district’s jurisdiction, though specific locations are not detailed, implying the work may be distributed across multiple campuses. The contract is not subject to any set-aside provisions, and all bidders must ensure compliance with technical specifications for device integration, durability, and alarm system synchronization to meet the district’s safety requirements.

Dekalb County School District

POSTED

DEADLINE

Video Surveillance and Security Camera SystemsThe contract pertains to the design, supply, installation, and ongoing monitoring of IP-based closed-circuit television systems for the Dekalb County School District in Georgia. It encompasses all necessary hardware and software components including network cameras, network video recorders, data storage solutions, and remote viewing capabilities to ensure comprehensive security coverage across school facilities. The work must be executed in accordance with technical specifications that support seamless integration, reliable performance, and long-term operational effectiveness within the district’s existing infrastructure. All bids must be submitted by the deadline of August 27, 2026, and the contract is categorized as a subcontract under NAICS code 238210, indicating it falls within the electrical and other wiring installation contracting sector. The project requires strict adherence to industry standards for surveillance technology and emphasizes secure, scalable, and remotely accessible video monitoring to enhance school safety. The scope demands qualified vendors capable of end-to-end delivery, from initial system planning through final commissioning and support, with an expectation of compliance with all applicable state and federal security protocols for educational environments.

Dekalb County School District

POSTED

DEADLINE

Electronic Access Control SystemsThe contract entitled Electronic Access Control Systems is a subcontract issued by the Dekalb County School District in Georgia for the supply and installation of comprehensive electronic security systems across school buildings. It encompasses the procurement and deployment of electronic door locks, keycard readers, biometric scanners, and a centralized access management software platform designed to modernize and secure facility entry points. The system will enable automated, auditable, and scalable control over who can access which areas, with the software providing real-time monitoring, user management, and emergency response capabilities tailored to the needs of a school environment. All components must be integrated to function as a unified system, ensuring seamless operation, compatibility, and compliance with educational facility safety standards. The solicitation was posted on July 30, 2026, with a response deadline of August 27, 2026, allowing interested vendors a limited window to submit proposals. The North American Industry Classification System code 238210 indicates the work falls under electrical and other construction installation services, suggesting the contractor must have expertise in both hardware installation and networked software integration. The place of performance is within the Dekalb County School District’s properties, though specific locations are not detailed. The subcontract nature implies the primary contract may be managed by a higher-tier prime contractor, and bidders must be prepared to meet stringent technical, logistical, and potentially security clearance requirements to deliver and support the system effectively across multiple school sites.

Dekalb County School District

POSTED

DEADLINE

RFP - UPS-C Replacement and Distribution - 1825 St

Solicitation # ST-Doc5815124698

SaskTel is inviting qualified suppliers to submit proposals for the replacement and distribution of an uninterruptible power supply system at 1825 Lorne Street in Regina, Saskatchewan, under solicitation number ST-Doc5815124698. The project requires the installation of a new 2MW UPS system complete with input switchgear and output distribution panels, followed by the full removal of the existing unit. Participation is mandatory through SaskTel’s Ariba e-sourcing platform, and all interested suppliers must first register or ensure their existing Ariba account is properly linked to SaskTel’s domain to gain access. Only registered and approved suppliers will be considered, and access to the opportunity must be formally requested via email or phone. Key mandatory requirements include COR certification and bonding, and all participants must attend a mandatory site walkthrough on August 13, 2026, at 9:00 AM. Proposals must be submitted by August 27, 2026, and the contract term extends from award date through November 15, 2028. This procurement is governed by Chapter 5 of the Canadian Free Trade Agreement, and all inquiries should be directed to SaskTel’s Corporate Services Contracts team.

Saskatchewan Telecommunications

POSTED

DEADLINE

Holiday Lighting Installation, Maintenance & Strike Services Longhorn Lights

Solicitation # 721-26004

The University of Texas at Austin is seeking qualified vendors to provide comprehensive holiday lighting services for the Longhorn Lights program, encompassing annual installation, maintenance, and complete strike of the university-owned lighting inventory. Work must be executed in accordance with detailed design drawings, renderings, and schematics developed by the UEE production team, ensuring alignment with the university’s aesthetic and operational standards. The vendor is responsible for all consultation, on-site adjustments, and full removal of equipment after the event period, with services rendered on an as-needed basis throughout the year as required by the university’s scheduling and programming needs. All proposals must be submitted by the deadline of August 17, 2026, in response to solicitation number 721-26004, which was posted on July 30, 2026. The procurement is managed by the University of Texas at Austin under the State and Local Government (SLED) category, with performance required in Texas. Primary point of contact for inquiries is Lina-Courtney Trejo, reachable via email at lina.trejo@austin.utexas.edu or by phone at 210-784-7316. Vendors are expected to demonstrate proven experience in large-scale lighting installations and the ability to work within strict design parameters while adhering to safety and logistical requirements on campus.

University of Texas at Austin

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Health Agency

Same awarding agency

Exhibit Component Transportation and LogisticsThe contract seeks a qualified small business to provide secure, climate-controlled transportation, packing, and storage services for delicate exhibit components and artifacts, with strict requirements for shock-absorbent materials and high-value insurance coverage to ensure the integrity and safety of all items throughout the logistics process. Services must meet rigorous standards for environmental stability and physical protection, tailored to the unique needs of sensitive cultural or historical materials. The work is performance-based, with all operations centered on the designated place of performance in Silver Spring, Maryland, under the oversight of the Defense Health Agency, a component of the Department of Defense. This is a Small Business Set Aside contract under NAICS code 484220, reserved exclusively for small businesses, with a response deadline of August 14, 2026, and an initial posting date of July 30, 2026. The subcontract nature of the agreement implies it will be awarded to a vendor who will support a larger prime contract or program, with compliance expected in all aspects of handling, transit, and storage. While specific itemized requirements are not detailed here, the emphasis on security, environmental control, and insurance indicates a high-stakes operational environment requiring proven expertise, reliable infrastructure, and adherence to federal standards for the transport of irreplaceable artifacts.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Artifact Mountmaking and Conservation HandlingThe contract entails the design and fabrication of custom mounts and cradles for cultural artifacts, ensuring each piece is securely supported using methods approved by conservation professionals. All work must be performed under the direct supervision of curatorial staff to maintain the integrity and safety of the artifacts, with strict adherence to established conservation protocols for handling, transport, and installation. The scope requires specialized expertise in material selection, structural engineering, and non-invasive techniques to prevent any physical or chemical damage to sensitive items. This is a small business set-aside subcontract under NAICS code 541990, issued by the Defense Health Agency within the Department of Defense. The opportunity was posted on July 30, 2026, with responses due by August 14, 2026, and performance is to take place in Silver Spring, Maryland, with zip code 20910. No point of contact information is provided, and the solicitation number is not listed, indicating it may be an internal or non-public procurement. The requirement emphasizes precision, accountability, and compatibility with institutional conservation standards, making it suitable for qualified small businesses with proven experience in museum-level artifact handling and custom fabrication.

All Other Professional, Scientific, and Technical Services

POSTED

DEADLINE

Exhibit Graphics, Signage, and Interpretive PanelsThe contract calls for the design, printing, and installation of archival, fade-resistant exhibit graphics, signage, and interpretive panels requiring precise color matching, ensuring long-lasting visual quality and accuracy for public displays. This work is scoped as a subcontract under a Small Business Set Aside designation, specifically reserved for small businesses, and is classified under NAICS code 323111 for commercial printing. The project is tied to the Defense Health Agency within the Department of Defense and will be performed in Silver Spring, Maryland, with a zip code of 20910. Bidders must submit proposals by August 14, 2026, at 2:00 PM, following the posting of the opportunity on July 30, 2026, with no solicitation number assigned. The emphasis on archival and fade-resistant materials ensures durability and visual integrity over time, suitable for federal, high-traffic environments.

Commercial Printing (except Screen and Books)

POSTED

DEADLINE

Audiovisual (AV) Systems IntegrationThe contract is for the supply, installation, and integration of audiovisual systems designed to enhance public exhibit interaction, encompassing monitors, touch screens, media players, and control systems. This subcontract is a Small Business Set Aside under the NAICS code 238210, reserved exclusively for small businesses, and is being issued by the Defense Health Agency under the Department of Defense. The work is to be performed at a location in Silver Spring, Maryland, with a ZIP code of 20910. The opportunity was posted on July 30, 2026, and responses must be submitted by August 14, 2026, at 2:00 PM. The project focuses on delivering a fully functional, interactive AV environment tailored for public engagement, requiring seamless integration of hardware and control infrastructure to ensure reliable and intuitive user experiences.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Custom Museum Case and Exhibit Furniture FabricationThe contract is for the design, engineering, and construction of custom display cases, pedestals, platforms, and exhibit furniture specifically tailored for museum and heritage environments, requiring the use of conservationally sound, archival-quality materials that meet rigorous museum standards to ensure the long-term preservation of sensitive artifacts. All work must adhere to industry best practices for environmental control, material stability, and non-reactive construction techniques to safeguard cultural heritage items from degradation caused by light, humidity, off-gassing, or physical stress. This is a subcontract classified under the Small Business Set Aside - Total category with a NAICS code of 337215, indicating it is reserved exclusively for small businesses. The opportunity was posted on July 30, 2026, with a response deadline of August 14, 2026, and is managed by the Defense Health Agency under the Department of Defense. Performance of the work is required to take place in Silver Spring, Maryland, with a zip code of 20910. While specific financial details or point of contact information are not provided, interested parties must ensure full compliance with federal contracting requirements and exhibit fabrications that align with institutional conservation protocols.

Showcase, Partition, Shelving, and Locker Manufacturing

POSTED

DEADLINE

MUSEUM EXHIBIT FABRICATIONS

Solicitation # HT001426QE018

This solicitation, identified as HT001426QE018, is a Small Business Set Aside under NAICS code 712110 for the fabrication of museum exhibits in support of the National Museum of Health and Medicine in Silver Spring, Maryland. The Defense Health Agency Contracting Activity will award a Blanket Purchase Agreement (BPA) to the most advantageous offeror based on a best value trade-off analysis of technical approach, past performance, and price, with no minimum guarantee of work or call order value. The BPA has a five-year term or until the $350,000 ceiling is reached, whichever comes first, and all orders placed under it will be Firm-Fixed-Price. The contract requires comprehensive exhibit fabrication services including construction of cases, furniture, lighting, audiovisual systems, signage, and installation of artifacts using conservationally approved materials in full compliance with the Architectural Woodwork Standards, National Park Service Guidelines, and the National Electrical Code. All work must adhere to strict artifact handling protocols overseen by the museum’s Registrar, and deliverables are subject to final inspection at the museum's facility with 100% compliance required for critical components. Offerors must be registered in SAM as small businesses and provide their Unique Entity Identifier; subcontracting is subject to specific commercial items clauses and cybersecurity obligations including safeguarding covered defense information and antiterrorism training. Key personnel must meet rigorous experience thresholds in museum exhibition work, including certified mountmakers, project managers, and conservation specialists. Security requirements mandate Personal Identity Verification for personnel accessing federal sites, and cybersecurity protocols under DFARS 252.204-7012 must be implemented. Submissions must be sent electronically to Judith S. Meynard by 10:00 AM EST on August 14, 2026, using Microsoft Office-compatible formats and include a technical approach not exceeding three pages, relevant past performance references, and pricing via the NMHM Price List. The offeror must hold prices firm for 90 days, and the Government reserves the right to award without discussions. Invoicing will be processed electronically through WAWF using specified document types, and payment will be administered through assigned DoDAACs including HT0078. The period of performance begins September 30, 2026, with options to extend services up to six months and the contract term up to 48 months total at the Government’s discretion.

POSTED

DEADLINE

Columbus Air force Base Dried Ice

Solicitation # HT940826QE027

This solicitation, designated HT940826QE027, is a 100% small business set-aside under NAICS code 325120 for the weekly delivery of 300 pounds of dry ice pellets to the military treatment facility at Columbus Air Force Base, Mississippi, over a five-year period with one base year and four one-year option periods. The contract is structured as a firm-fixed-price arrangement and will be awarded on a lowest price technically acceptable basis, where technical acceptability is a pass/fail determination based on the offeror’s ability to meet the stated requirements, and the lowest-priced technically acceptable offer will be selected. Funding is not currently available, and no award will be made until funds are obligated, with the government retaining the right to cancel the solicitation at any time without liability for offeror costs. All proposals must include a Unique Entity Identifier, demonstrate compliance with SAM registration requirements, and adhere to strict submission guidelines including a 10-page limit on evaluation factor responses and inclusion of the solicitation number in the subject line. Delivery is FOB destination to the designated location in Columbus, Mississippi, with acceptance performed by the government and invoicing required exclusively through the Wide Area WorkFlow system using specified document types. Packaging and labeling must conform to MIL-STD-129 for shipment and MIL-STD-130 for unique item identification using two-dimensional Data Matrix symbology with ECC200 encoding, ensuring traceability through enterprise identifiers and serial numbers. Offerors must certify compliance with numerous federal regulations including prohibitions on covered telecommunications equipment from certain foreign sources, restrictions on procurement from Xinjiang, and the Buy American Act. Specific requirements for child labor, human trafficking, equal opportunity, and sustainable products are incorporated by reference, and subcontracting must comply with applicable commercial services clauses. The prime point of contact for questions is Meagan Askew, with Jorge Canavati serving as the contracting officer, and all communication must reference the solicitation number. The contract administration responsibilities are managed by the Defense Health Agency’s HCD SOUTH office in San Antonio, Texas, with payment processing handled under DoDAAC HQ0490, and inspection coordination led by Juliette Zuber at the delivery site. No contract value is stated in the solicitation documents, as pricing information is expected to be submitted by offerors and evaluated during the award process.

Industrial Gas Manufacturing

POSTED

DEADLINE

Ice Machine Maintenance Services in Support of Naval Hospital Beaufort

Solicitation # PANDHA26P0000042359

The Defense Health Agency is seeking a firm-fixed-price contract for ice machine maintenance services at Naval Hospital Beaufort and associated facilities in South Carolina, including MCAS Beaufort and MCRD Parris Island. This is a 100% Total Small Business Set-Aside under FAR 6.102-2, restricted to small businesses with a size standard of $12.5 million in annual receipts, using the NAICS code 811310 for commercial and industrial machinery repair and maintenance. The contract will cover the scheduled and unscheduled maintenance, corrective, and emergency repair of seven medical-grade ice machines across the three locations, with all work required to meet OEM specifications and comply with Joint Commission, NFPA, OSHA, and EPA standards. Contractors must provide all personnel, equipment, tools, vehicles, materials, and supervision necessary to perform services safely and efficiently on-site. The base performance period runs from September 1, 2026, to August 31, 2027, with four optional one-year periods extending through August 31, 2031, and an additional six-month extension option available through February 29, 2032 under FAR 52.217-8. The government will award without discussions but reserves the right to conduct them, and offerors must submit their best offer upfront. Proposals must include a detailed technical capability approach and a separate, firm-fixed-price quotation for each CLIN, with prices held firm for 90 days after the submission deadline. Contract financing is not authorized, and payment will be processed electronically through DFAS using WAWF, requiring submission via Invoice 2IN1 or equivalent forms. Successful offerors must be registered in SAM, comply with all reporting obligations under FAR clauses 52.204-7, 52.204-10, and 52.204-13, and adhere to strict security protocols, including obtaining required base passes, protecting protected government information, and ensuring personnel comply with hazard communication and PPE requirements. Technical capability is the primary evaluation factor and is significantly more important than price; proposals deemed technically unacceptable will be disqualified regardless of pricing. All submissions must be sent via email to the designated points of contact, formatted in unencrypted Word, Excel, or searchable PDF files, with required cover pages including CAGE code, UEI, and point of contact information.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Genotyping Analysis Services

Solicitation # HT942626QE044

The US Army Army Research Institute of Environmental Medicine is seeking a vendor to perform large-scale genomic analysis on 648 DNA samples collected as part of the Military Health and Nutrition Examination Survey, using the Illumina Global Diversity Array to genotype approximately 1.8 million genome-wide SNPs. This service supports critical research operations including population genetics, ancestry inference, polygenic score calculation, and genome-wide association studies. The contractor must deliver comprehensive technical reports with full de-identified datasets within 90 days of sample receipt, alongside a finalized Quality Control Plan within 15 days of award and same-day confirmation of sample arrival. All work must adhere to Good Laboratory Practices and validated Standard Operating Procedures, with analytical accuracy requiring zero customer complaints and a minimum genotype call rate of 96.5 percent, including HapMap controls and duplicate samples for validation. The contract is expected to be awarded on a Firm-Fixed Price basis under a trade-off evaluation process prioritizing Technical Approach and Past Performance, both of which must meet an Acceptable threshold before Price is considered. Only offers that are technically acceptable and demonstrate relevant past performance with substantial or good confidence will proceed to price evaluation. The solicitation requires electronic submission of two volumes — a 10-page Technical Approach and a separate Past Performance and Price volume — via email by 9:00 AM Eastern Time on July 30, 2026, using MS Word, Excel, or searchable PDF formats with no compression. The contractor must be registered in SAM.gov and the WAWF portal for invoicing, which will be conducted electronically following DFARS requirements. Samples must be shipped as a single batch immediately after award in EDTA tubes at 0.5 mL per sample, with delivery to the destination in Natick, Massachusetts, under FOB Destination terms. The contract period of performance runs from August 4, 2026, to August 3, 2027. Contractors must comply with numerous FAR and DFARS clauses, including protections against inverted corporations, subcontracts with excluded entities, cybersecurity requirements, and prohibitions on covered telecommunications equipment. No set-aside is designated, though small business, HUBZone, SDVOSB, WOSB, EDWOSB, and 8(a) entities may compete. The government retains inspection authority at the delivery site, and all deliverables must meet the Performance Requirements Summary and Quality Assurance Surveillance Plan standards without government oversight of daily operations. Key personnel and security clearance requirements are currently reserved, and

Medical Laboratories

POSTED

DEADLINE

Notice of Intent to Sole Source Impella Perfusion Pumps Maintenance for NMC Portsmouth

Solicitation # NOI_12454270

The Government intends to award a sole-source, firm-fixed-price contract to Abiomed, Inc. for the maintenance of Impella Perfusion Pumps under Simplified Acquisition Procedures, as authorized by FAR Part 13.106-1(b), with a total estimated value of $130,000. The contract will include a base year running from October 1, 2026, through September 30, 2027, and up to four optional one-year extensions. Abiomed, Inc. is identified as the exclusive provider of this specific maintenance service, justifying the non-competitive procurement. The purchase is necessary to support the operational mission of Naval Medical Center Portsmouth, and any response challenging the sole-source determination must provide clear and convincing evidence that competition would be advantageous, cost-effective, timely, and not detrimental to mission readiness. This notice is not a request for quotes or proposals, and respondents assume all costs associated with their submissions. The Defense Health Agency, through its office in Frederick, Maryland, is the responsible agency, with performance based at Naval Medical Center Portsmouth, Virginia. All inquiries must be directed to Contract Specialist Cynthia Scharnowske by the response deadline of August 11, 2026, using the specified subject line format.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

European Healthcare Environmental Cleaning (HEC) Services

Solicitation # HT9406-26-R-E006

The Defense Health Agency is soliciting proposals for Healthcare Environmental Cleaning (HEC) and Linen Services across multiple Military Treatment Facilities in Germany under solicitation HT9406-26-R-E006, with a NAICS code of 561720 and a Product Service Code of Q901. The contract covers services at Landstuhl Regional Medical Center and its outlying clinics in Baumholder, Kaiserslautern, and Wiesbaden; Medical Department Activity – Bavaria and its clinics in Vilseck, Grafenwoehr, Hohenfels, Ansbach, Illesheim, and Stuttgart; and Rhine Ordinance Medical Center in Weilerbach. Performance will be 24/7 at primary sites, with cleaning tasks required to be scheduled outside normal operating hours in sensitive areas. The ordering period extends from May 15, 2027, to May 14, 2032, including a 90-day phase-in period, with task orders issued on a firm fixed price basis and subject to estimated quantities that become firm upon issuance. All work must adhere to AHE Practice Guidance, CDC, OSHA, and other federal and local standards, with compliance required for ISO 9001:2015 through a documented Quality Control Program that includes workforce productivity metrics, quality assessment methods, and corrective action plans. Contractors must submit monthly inspection reports using a government-provided template and comply with strict quality assurance surveillance by the Government. Proposals must be submitted in four separately structured volumes—Administrative, Technical Capability, Performance Confidence, and Price—each written to stand alone without cross-referencing, using 12-point Arial or Times New Roman font, 1-inch margins, and in .docx, .xlsx, or searchable PDF formats. The Technical Capability and Performance Confidence phases serve as mandatory pass/fail gates, with unacceptable ratings in Technical Capability or limited/no confidence in Performance Confidence leading to automatic disqualification. Price is evaluated as a tradeoff factor but is significantly less important than performance confidence. Offerors must hold firm pricing for 90 days and maintain active SAM registration at submission and award, with foreign entities required to secure an NCAGE code prior to registration. All personnel must meet health requirements including immunizations and annual medical testing, and contractors bear all associated costs. Staff must wear distinctive uniforms identifying company and employee names, use government-furnished equipment responsibly, and comply with Privacy Act, HIP

Janitorial Services

POSTED

DEADLINE

in about 1 month

Supply and Delivery of Brand-Name Sleep ChambersThe contract requires the supply and delivery of 12 commercial off-the-shelf brand-name sleep chambers to the Walter Reed Army Institute of Research under F.o.b. Destination terms, with acceptance contingent upon successful inspection upon delivery. The equipment must meet specified standards as brand-name products, ensuring compatibility with research protocols and operational requirements. Delivery is due to a confirmed location in Silver Spring, Maryland, with a zip code of 20910, and performance is governed by the Defense Health Agency under the Department of Defense. The NAICS code 334516 applies, indicating classification within the manufacturing of surgical and medical instrumentation, which aligns with the nature of the sleep chambers as specialized medical devices. The solicitation was posted on July 24, 2026, with a firm response deadline of August 7, 2026, at 2:00 PM. This is structured as a subcontract under the broader DoD procurement framework, with no set-aside designation specified. Delivery must comply with F.o.b. Destination terms, meaning ownership and risk transfer to the government only after the items arrive at the designated site and pass inspection. Failure to meet specifications or deliver on schedule may result in non-acceptance and potential contract termination. All items must be brand-name products, excluding generic or private-label alternatives, and must be fully functional for use in clinical and research environments at the facility in Silver Spring.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE