This Solicitation opportunity from Government of Canada was posted on August 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

F1782-26C065 – CCGS Franklin – Drydocking and Refit

Closed

WS5681224062International

Submission Closed08/26/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336611

New

SLED

F&W, 2018 Munson Packman Boat Repower project

Solicitation # 2018 Munson Packman Boat Repower

The Confederated Tribes of the Colville Reservation Fish and Wildlife Department is soliciting proposals for a comprehensive propulsion repower and helm system integration for a 30-foot 2018 Munson Packman landing craft. The project requires a factory-certified Honda Marine Authorized Dealer to decommission two existing Honda BF250A outboard engines and install two new Honda BF250D Drive-by-Wire outboards. The scope of work is divided into six phases, encompassing the removal of legacy rigging, a structural transom assessment, the installation of new iST electronic control heads at dual helm stations, integration with the existing SeaStar Power Assist steering and NMEA 2000 network, and a complete fuel system overhaul using USCG Type A1-15 lines. Final acceptance is contingent upon successful pre-flight diagnostics and a minimum two-hour sea trial to validate speed, RPM, and dual-station control handoffs. The selected contractor must provide a secure facility for vessel storage and maintain significant insurance coverages, including 1 million dollars per occurrence for Commercial General Liability and Business Automobile Liability. Contracts exceeding 100,000 dollars require a performance bond; otherwise, a 25 percent retainage applies. All work is subject to Colville Tribal law and the jurisdiction of the Colville Tribal Court, with a strong emphasis on Indian preference in accordance with TERO regulations. Proposals must be submitted in PDF format by November 13, 2026, and will be evaluated based on a 100-point scale considering technical expertise, experience, and cost, though the lowest bid is not guaranteed the award.

Confederated Tribes of the Colville Reservation

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-2573

This contract, solicitation SPE7M4-27-T-2573, is for the procurement of 45 units of a Pilot Valve Cartridge (NSN 4820010935564) by the DLA Weapons Support Fluid Handling Division. The item is classified as a restricted source item and a critical application item, requiring engineering source approval by the Government Design Control Activity. The cartridges are supplied separately from the parent valve assembly and must be tested for conformance to proof pressure, friction, and leakage requirements per the associated Acceptance Test Procedure, though acoustic testing is excluded as it requires the full assembly. Delivery is required within 168 days after order, with a need ship date of May 4, 2027, and an original required delivery date of October 16, 2028. The contract mandates strict adherence to quality and safety standards, including the prohibition of intentionally added mercury and compliance with the DLA Master List of Technical and Quality Requirements. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with palletization governed by RP001. Inspection and acceptance are set at the destination. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment. Compliance mandates include CMMC Level 2 Self-Assessment, the Buy American and Balance of Payments Program, and various FAR/DFARS clauses regarding hazardous materials, export controls, and equal opportunity.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

DOOR, METAL, MARINE STRU

Solicitation # SPE7M4-27-T-2415

Solicitation SPE7M4-27-T-2415, issued by the DLA Weapons Support Fluid Handling Division, seeks quotes for five metal marine structural doors under NAICS 336611. The requirement specifies three doors measuring 30W x 66H, with two configured for right-hand operation, one latch set, and one door featuring a fixed light, all adhering to drawing 1648659-3211. Delivery is required within 168 days after order to DLA Distribution San Diego, with a need ship date of May 4, 2027. The procurement is designated as a total small business set-aside, though some document sections contain conflicting notes regarding set-aside status. The contract imposes strict security and quality mandates, including CMMC Level 2 certification and adherence to ITAR or EAR export controls for technical data. Technical data access is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export training. Quality systems must comply with SAE AS9003 or ISO 9001. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, and all invoicing must be processed through the Wide Area WorkFlow system. Offerors must comply with the Buy American Act and Berry Amendment, and the use of additive manufacturing is prohibited unless specifically authorized.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-2365

Solicitation SPE7M4-27-T-2365 is a Request for Quotations issued by the DLA Weapons Support Fluid Handling Division for the procurement of one Control System, CPR. This critical application item is identified as NSN 2010012637030, specifically The Oilgear Company part number SV117. The procurement is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 336611. Quotations were due by November 16, 2026, with a required delivery date of October 21, 2027, and a need ship date of May 4, 2027. Delivery is specified as FOB Origin, with the final destination for inspection and acceptance being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Key compliance requirements include a CMMC Level 2 Self-Assessment, safeguarding of covered defense information, and strict prohibitions against the intentional addition of mercury per NAVSEA 5100-003D. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The solicitation also incorporates various FAR and DFARS clauses regarding limitations on subcontracting, basic safeguarding of contractor information systems, and prohibitions on the acquisition of certain telecommunications equipment or items from Communist Chinese military companies.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7L4-27-T-0875

This solicitation, issued by the DLA Weapons Support LSO Combat Vehicles and Armament, is a Small Business Set-Aside for the procurement of 12 roller chains (NSN 3020-01-455-5635). The contract is a fixed-price request for quotations with a required delivery date of August 9, 2027, and a need ship date of July 9, 2027. Delivery is FOB Origin, with both inspection and acceptance occurring at the origin. The items must be produced according to reference drawing 19200 12524407 Revision A and must adhere to strict packaging and marking standards, including MIL-STD-2073-1E, MIL-STD-129, and Special Packaging Instruction AM12524407. The contract mandates rigorous quality control, requiring the manufacturer to comply with ISO 9001:2015 and utilize specific sampling methods such as MIL-STD-1916. Government Source Inspection is required, and first article approval authority is delegated to the DCMA, with a first article test report due within 60 days of the contract date. Security and compliance requirements are significant, including adherence to CMMC Level 2, NIST SP 800-171, and strict export controls under ITAR and EAR. Additionally, the contractor must comply with the Berry Amendment and Buy American Act, and utilize the Wide Area WorkFlow system for electronic invoicing and payment.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Angler Surveying Vessel SupplyThis subcontract involves the manufacture and delivery of one angler surveying vessel to support prime contractors working on Ministry of Natural Resources projects within the Lake Ontario Management Unit. The vessel must feature a marine-grade hull and a deck configuration specifically designed for offshore surveying activities, ensuring full compliance with Occupational Health and Safety Act standards for equipment safety. Managed by the Government of Ontario, the project falls under NAICS code 336611 and will be performed in Canada. Interested parties must submit their responses by November 24, 2026, to fulfill the requirement for the delivery of the completed surveying vessel.

POSTED

DEADLINE

Port STL Interlock Evaluation and RepairThis subcontract involves the evaluation and corrective maintenance of the Port STL Interlock system for prime contractors supporting Navsup Fleet Logistics Center Yokosuka projects. The scope of work requires assessing the current state of the system and performing necessary repairs to restore it to full operational standards. All work must be executed using propulsion machinery tools and components specifically designed for the T-AO 206 class and must strictly adhere to MSC Corrective Maintenance Engineering standards. The primary objective of the contract is the delivery of a fully operational Port STL Interlock. This opportunity is categorized under NAICS code 336611 and is managed by the Department of Defense. Interested parties should note the response deadline of November 12, 2026.

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

Supply of Brand-Name Marine Seat Bottoms (P/N SW-01309)This subcontract, issued by the Department of Homeland Security agency CG-SEA-C23, requires the procurement of forty brand-name seat bottom components, part number SW-01309, for US Coast Guard 26-foot TANB asset projects. The selected provider must supply the specific brand-name product designated under FAR 13.106-1(b) and ensure all items are delivered to Curtis Bay, Maryland, in compliance with FAR 52.211-8 and 52.211-9 delivery schedules. The opportunity is designated as a total Small Business Set Aside under NAICS code 336611. Interested parties must submit their responses by November 18, 2026, to fulfill the requirement for these specialized marine components.

POSTED

DEADLINE

Marine Structural Welding and FabricationThis subcontract for Marine Structural Welding and Fabrication involves performing specialized steel repairs for prime contractors on Puget Sound Naval Shipyard IMF projects. The scope of work includes the removal of trip hazard stanchions and the installation of CRES 316 drain and vent plugs. Additionally, the contractor is responsible for executing structural repairs to the hull and superstructure in strict accordance with MIL-STD-1310 REV H and AWS D1.1 standards. To ensure quality and safety, the contractor must perform a 100 percent visual inspection of all completed welds and deliver certified structural repairs. This Department of Defense project falls under NAICS code 336611, with a response deadline set for November 18, 2026.

Puget Sound Naval Shipyard IMF

POSTED

DEADLINE

Marine Towing and Docking ServicesThis subcontract for Marine Towing and Docking Services supports prime contractors on Puget Sound Naval Shipyard IMF projects under the Department of Defense. The scope of work involves the transport of the YON-325 vessel from the Manchester Fuel Depot to a repair facility and its subsequent return. The contractor is responsible for the safe docking and undocking of the vessel, which includes the development of comprehensive docking procedures and blocking plans in accordance with drawing 7642547. A critical requirement of the contract is the provision of a certified Dock Master who must be accepted by the Government Docking Observer to ensure operational safety and compliance. The project falls under NAICS code 336611, with a response deadline set for November 18, 2026.

Puget Sound Naval Shipyard IMF

POSTED

DEADLINE

5-year, Long Term, Multiple Award, Indefinite-Delivery, Indefinite-Quantity Procurement Contract

Solicitation # N0010427RY051

NAVSUP Weapon Systems Support is preparing to solicit a five-year, long-term, multiple-award, indefinite-delivery, indefinite-quantity procurement contract. The contract structure consists of one base year and four option years, requiring offerors to provide firm-fixed prices for each year and each contract line item. The scope of work involves the provision of specific parts and materials identified by National Item Identification Numbers, including items such as 24x36 DURA X Tiles. While the government has provided best estimated quantities for evaluation purposes, these do not constitute a guaranteed purchase quantity. Competition is strictly limited to pre-qualified approved sources who possess the necessary engineering skills, manufacturing knowledge, and data rights essential to maintaining part quality. Award eligibility is contingent upon meeting qualification requirements at the time of award in accordance with FAR clause 52.209-1. This procurement does not utilize FAR Part 12 policies for commercial items, although interested parties may notify the contracting officer of available commercial alternatives. This notice serves as a presolicitation and does not constitute a formal request for proposal or a commitment by the government to award a contract.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

USNS EARL WARREN (T-AO 207) ROH/UWILD AMENDMENT 0001

Solicitation # N6264927RL005

Solicitation N6264927RL005, issued by NAVSUP Fleet Logistics Center Yokosuka, Site Singapore, is a total small business set-aside for the Regular Overhaul and Underwater Hull Inspection (ROH/UWILD) of the USNS EARL WARREN (T-AO 207). The scope of work includes a comprehensive repair and maintenance package detailed in Work Item Specification Package MSC SSU 27-010, covering hull and structural work, propulsion machinery, electrical systems, and communication and navigation services. Performance is scheduled from May 31, 2027, to July 11, 2027, with an option to extend to July 26, 2027. Work must be performed within the U.S. 7th Fleet Area of Responsibility, specifically excluding India. The government intends to award a fixed-price contract to the responsible offeror providing the lowest evaluated price with acceptable technical and past performance ratings. Technical evaluations will focus on engineering, material availability, quality control, and safety plans, while past performance will be assessed based on relevant contracts from the last five years. Proposals must be submitted electronically by December 2, 2026, at 1:00 PM Singapore Standard Time, organized into separate volumes for price, past performance, and administrative requirements. Awardees must maintain an active registration in the System for Awards Management (SAM) and comply with ABS standards and DFARS cybersecurity and safety regulations.

Navsup Flt Logistics Ctr Yokosuka

POSTED

1 day ago

DEADLINE

in 26 days

AI Contract Overview

The Canadian Coast Guard is procuring drydocking and refit services for the CCGS Franklin under solicitation WS5681224062, with the work scheduled to occur between 28 October 2026 and 18 December 2026. The primary location for the work is the Esquimalt Graving Dock in British Columbia, where a booking is secured from 28 October to 4 December 2026, followed by an additional alongside berth booking from 4 to 18 December 2026. Alternatively, qualified bid applicants may propose using their own drydocking facility, provided it satisfies the technical and operational requirements outlined in the solicitation. The procurement is restricted to suppliers based in Western Canada, the vessel's Area of Origin, to support regional industrial capacity. A mandatory bidders’ conference will be held in Sidney, BC, followed by an onboard site visit to the CCGS Franklin immediately afterward to ensure prospective contractors fully understand the scope and conditions. Responses to the solicitation are due by 19:00 UTC on 26 August 2026, and the contract is administered by Public Services and Procurement Canada with Torrey Buchan listed as the primary contracting authority.

General Info

Canadian Coast Guard seeks Western Canada contractors for CCGS Franklin drydocking, refit, October-December 2026.

Agency

Government of Canada → Department of Public Works and Government Services

NAICS

336611 - Ship Building and Repairing

Place of Performance

British Columbia, CAN

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 14

Solicitation

Response DeadlineAug 26

Deadline has passed

Submission Closed

08/26/2026, 07:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of Public Works and Government Services

Contacts1 person available

OfficeN/A

Organization / AgencyGovernment of Canada → Department of Public Works and Government Services

Office AddressN/A

Contacts

Buchan Torrey (SPAC/PSPC) (il-lui / he-himContracting Authority

contact@example.gov

Full Description

The Canadian Coast Guard has a requirement for the drydocking and refit of the Canadian Coast Guard Ship CCGS Franklin. The work period for the refit is 28 October 2026 to 18 December 2026. A bidders' conference will be held in Sidney, BC. Arrangements have been made for a site visit to be held onboard the vessel immediately after the bidders’ conference. The sourcing strategy related to this procurement will be limited to suppliers in the Area of Origin of the vessel (Western Canada). Canada has made a booking of the Esquimalt Graving Dock, with the dock booked between October 28th and December 4, 2026. There is a further booking for space alongside the Esquimalt Graving Dock for the period of December 4 to 18, 2026. Alternatively, the work may occur at the bidder's drydocking facility provided their facility meets the requirements defined in this solicitation.