Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

FD2030-24-00327-02

Active
FD2030-24-00327-02Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a Receptacle Assembly identified by NSN 1680-01-057-3391RK, with technical specifications governed by TOP DRAWING 16VP003-3 and an EMD MDC code, reflecting its classification under military equipment standards. The engineering design is standardized under EDL Revision 5 dated 14 SEP 2020, ensuring consistency in manufacturing and compliance. The contracting activity is managed by DLA Aviation Oklahoma City under the Department of Defense, specifically through a subcommand structure, with Vivian U Dinh listed as the responsible IM name for oversight. The procurement is issued under solicitation number FD2030-24-00327-02, posted on August 3, 2026, with a responsive deadline set for August 3, 2027, at 16:00 UTC. It is classified as a special notice with no set-aside designation, indicating it is open to all eligible contractors without preferences. The NAICS code 336413 corresponds to Aircraft Engine and Engine Parts Manufacturing, aligning the scope with defense aviation component production. The place of performance and point of contact details are unspecified, and the full solicitation can be accessed via the provided SAM.gov link.

General Info

Procurement of Receptacle Assembly NSN 1680-01-057-3391RK per military specs by DLA Aviation Oklahoma City.

Agency

Department Of Defense → DLA Aviation Oklahoma CityView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

special-notice

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Aviation Oklahoma City
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → DLA Aviation Oklahoma City
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more

NSN:  1680-01-057-3391RK


NOUN:  RECEPTACLE ASSEMBLY


TOP DRAWING:  16VP003-3


EDL REVISION & DATE:  5  /  14  SEP  2020


MDC CODE:  EMD


IM NAME:  DINH, VIVIAN U

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
PULLEY, GROOVE
Solicitation # SPE7M4-26-T-328R
The contract is for the procurement of 2,405 units of a grooved pulley identified by NSN 3020002771123 and part number MS20220-2, designated as a critical application item and classified as a commercial item. The product must comply with stringent technical and quality requirements outlined in MIL-DTL-7034/2B and MIL-DTL-7034F(2), with adherence to TDP Revision B General 2 and reference drawing 200415485. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any other standards unless explicitly overridden by the contract. Sampling and inspection are strictly controlled under MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and all attributes are assigned predefined verification levels or AQLs. The item is subject to qualification under the Qualified Products List or Qualified Manufacturers List and must be packaged and labeled in compliance with MIL-STD-129 and ASTM D3951, with palletization meeting DLA Packaging Requirements. Delivery is FOB origin with a 164-day lead time and must arrive by February 2, 2027, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and the contract is awarded under a HUBZone Set-Aside with a primary point of contact at the Department of Defense’s Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
BRACKET ASSY, CYLIND
Solicitation # SPE4A7-26-T-637H
The contract pertains to the procurement of a bracket assembly for a cylinder system, identified by part number 800579-01 and NSN 1680-00-465-9457, with a quantity of six units to be delivered FOB origin within 102 days. The item is classified as a critical application component, and all inspection and acceptance must occur at the manufacturer’s origin using a zero-defect sampling standard—either MIL-STD-1916 or ASQ H1331—with critical attributes requiring acceptance levels of AQL 0.1, major attributes at AQL 1.0, and minor at AQL 4.0. Unspecified attributes are treated as major unless otherwise stated in referenced documents, and only zero non-conformances are acceptable unless the contract specifies otherwise. Sampling methodology may use either attribute or variable inspection at the manufacturer’s discretion, and MIL-STD-105/ASQ Z1.4 may inform sample size but not acceptance criteria. Packaging must comply with ASTM D3951 while being subordinate to the DLA Master List of Technical and Quality Requirements, with labeling and unit packaging strictly adhering to MIL-STD-129 and palletization governed by DLA’s RP001. The item must bear physical identification per RQ017, and any non-accepted supplies must have government identification removed. Cybersystem compliance requires a CMMC Level 2 self-assessment, and all documentation is governed by the DLA Master List version in effect on the solicitation date. Delivery is directed to DLA Distribution Warner Robins at Robins AFB, Georgia, with no variance allowed in quantity. The required ship date is November 29, 2026, while the original delivery deadline is November 4, 2027. The contract is issued under SPE4A7-26-T-637H, with procurement managed through a federal acquisition channel under NAICS code 336413 and point of contact Grayson Andrews of the Department of Defense.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
PIN, DOOR VISOR
Solicitation # SPE4A7-26-T-637M
The item specified is a PIN, DOOR VISOR with NSN 1560-00-888-8169, requiring a quantity of four units for delivery within 557 days after order date. Manufacturing may involve casting or forging processes, and associated tooling is typically necessary—however, the government may not possess this tooling, necessitating direct contact with DLA via their Casting and Forging Assistance Request portal for sourcing support. The acquisition is governed by stringent quality requirements tailored to the item, with inspection and acceptance to occur at the manufacturer’s origin. Physical identification of the item is required, but Item Unique Identification is explicitly waived per the service customer’s request. Technical data associated with this item is subject to export control under either ITAR or EAR, and its disclosure to any foreign person—even within the United States—is restricted unless authorized by the Department of State or Commerce. Only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on handling export-controlled data, and formal DLA approval may access such technical data. Packaging must comply with DLA standards, and any non-accepted supplies must have all government identification removed. There is no shelf life requirement for this material. The solicitation, issued under SPE4A7-26-T-637M, was posted on August 10, 2026, with responses due by August 18, 2026, and performance is designated for Robins AFB, Georgia, with Eugene Wilkens listed as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
PLATE, SCUFF, HYDRAUL
Solicitation # SPE4A7-26-R-XA11
The contract pertains to the procurement of a hydraulic scuff plate identified by NSN 1650-00-321-6288 and part number 86158-1, supplied by HYDRO-AIRE AEROSPACE CORP and CRANE COMPANY, under solicitation SPE4A7-26-R-XA11. It specifies a firm fixed price with zero variance in quantity, requiring delivery within 156 days after date of award. Inspection and acceptance occur at the origin, and packaging must comply with ASTM D3951 and MIL-STD-129, while palletization adheres to DLA Packaging Requirements for Procurement. All items must be marked and labeled per federal standards, and government identification must be removed from non-accepted supplies. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by solicitation or award date depending on acquisition size. The contract mandates compliance with CMMC Level 2 Cybersecurity Self-Assessment and includes stringent quality controls such as zero-defect sampling per MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. Configuration changes require formal engineering change proposals, and measuring and test equipment must meet specified standards. Documentation for source approval is required, and the item is designated as a critical application item. The unit of issue is one each, shipped to a government-designated destination under FOB destination terms, with freight and transportation instructions referencing DLAD procedural notes. All data marked as restricted proprietary information is protected under the contract, and point of contact for inquiries is Michael Kershaw of the Department of Defense.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336413
New
DIBBS
SKIN, AIRCRAFT
Solicitation # SPE4A7-26-R-0688
The contract pertains to the procurement of an aircraft skin part designated by NSN 1560-011519541 and part number 65-55125-1, manufactured in accordance with drawing 81205 65-55125 Revision C dated November 4, 1988. This is an indefinite quantity contract with a five-year base period and no option periods, under a total small business set-aside, with an estimated annual requirement of 40 units. Deliveries are required to be completed within 300 days after order placement, with FOB origin terms and inspection and acceptance also conducted at the origin. Access to technical data associated with this item is restricted to contractors certified by the Department of Defense under DOD 5220.22M, requiring submission of DD Form 2345 to the Defense Logistics Information Services. The solicitation, numbered SPE4A726R0688, will be issued on or about August 10, 2026, and is only available electronically via the DLA Internet Bid Board System; no paper copies will be provided. Proposals must be submitted by September 10, 2026, and all correspondence should be directed to Ryan Loeffelholz at the Department of Defense, Defense Logistics Agency Aviation, located in Richmond, Virginia.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
DIBBS
AXLE, LANDING GEAR
Solicitation # SPE4A5-26-T-338H
Offerors bidding on this solicitation must comply with strict domestic sourcing requirements, including the Berry Amendment and Buy American Act, with a lowered threshold of $150,000, and must disclose any non-domestic materials used in their proposal. The use of covered telecommunications equipment or services is prohibited under FAR and DFARS clauses, and all offers must affirm they will not supply such items. Small business joint ventures must submit specific representations for eligibility categories including small business, service-disabled veteran-owned, women-owned, economically disadvantaged women-owned, and HUBZone status. Vendors must provide quantity ranges in their quotes due to fluctuating demand, as manual evaluation allows for flexible adjustments without resolicitation, though this does not apply to Auto IDC. Submission of a “No Bid” on DIBBS is strongly encouraged for those anticipating delayed or non-participation to avoid assumptions of non-responsiveness. All contractors must register through DLA’s new AMPS system within two months to maintain access to the Vendor Shipment Module and continue shipping to DLA; VSM WebServices users must also update their internal schema to avoid disruption. Additive manufacturing is prohibited unless specifically approved, and any proposal including AM-produced items will be disqualified. The solicitation pertains to an AXLE, LANDING GEAR with NSN 1620-01-158-5930, quantity of 40 units, delivery required within 202 days ADO, and response is due by August 18, 2026. Fast Pay is not applicable, and APEX Accelerators are available at no cost to assist businesses with government contracting support.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SHAFT, BLOCK AND PIS
Solicitation # SPE7M4-26-T-329F
The contract pertains to the procurement of a Shaft, Block and Piston Assembly, identified by part number 622308 and NSN 1650-01-237-4425, with a quantity of five units. Delivery is required within 164 days from contract award, with shipment FOB origin and inspection and acceptance occurring at the destination, specifically DLA Distribution Depot Hill in Hill AFB, Utah. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129, with no special marking required. Palletization is governed by DLA packaging requirements, and all units must be prepared using prescribed methods including preservative treatments, wrapping material, and container standards. The contract stipulates that all technical and quality requirements are derived from the DLA Master List of Technical and Quality Requirements, with tailored higher-level quality standards applicable to both manufacturers and non-manufacturers. Sampling and inspection must follow MIL-STD-1916 or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels or AQLs as specified. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted supplies. Compliance with cybersecurity protocols is mandated through a CMMC Level 2 self-assessment, and although Item Unique Identification is not required per customer request, the contract remains subject to all applicable DFARS provisions. The contract is categorized as a simplified acquisition, and any changes to technical or quality stipulations must be controlled based on the revision of the DLA Master List in effect on the solicitation issue date. The unit of issue is each (EA), with a total price of $5.00 per unit, and no variance in quantity is permitted. The delivery schedule is rigid, with the original required delivery date set for September 3, 2028, and a need ship date of February 2, 2027. The solicitation was issued on August 10, 2026, with a response deadline of August 21, 2026, under NAICS code 336413 for aircraft and aircraft parts manufacturing, and is managed by the Department of Defense’s Fluid Handling Division, with primary point of contact Rory O’Reilly.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
Federal
HOUSING INDICATOR_End_Item_B0052_NSN_6680011726958RK_PN_10006-1002-01
Solicitation # FD20302700198
The U.S. Air Force, through the 422nd Supply Chain Management Squadron at Tinker Air Force Base, Oklahoma, is conducting market research to identify potential sources for the new manufacture of the Housing Indicator part number 10006-1002-01 with NSN 6680-01-172-6958RK for use on platform B0052. This effort, initiated under Notice ID FD20302700198, is a Sources Sought synopsis intended solely for market research and not a solicitation or invitation to bid. No contract will be awarded based on responses, and no funds are currently available. The government seeks information from all types of businesses including small, small disadvantaged, 8(a), service-disabled veteran-owned, HUBZone, and women-owned small businesses to determine whether the requirement can be competitively sourced or set aside for small businesses. The estimated requirement is 60 units, and potential vendors must demonstrate capability to handle new manufacture including component procurement, inspection, testing, packaging, shipping, supply chain management, and addressing long-lead items and diminishing manufacturing sources. Nonrecurring engineering costs to qualify as an approved source may also be required. Responses are due by August 17, 2026, Central Standard Time, and must be submitted via the designated workflow email address 422.scms.afmc.rfi@us.af.mil. Participation requires selecting the “Add Me to Interested Vendors” button on the posting; requests for a solicitation will not be answered. The North American Industry Classification System code is 336413 with a size standard of 1,250 employees, and the federal stock class is 6680. The place of performance is Tinker Air Force Base, Oklahoma. This is explicitly a new spares procurement with no repair component, and the government intends to use the gathered information solely to shape the future acquisition strategy, including the possibility of breaking the requirement down by airframe.
Ok DLA Aviation At Oklahoma City

POSTED

about 7 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
Federal
VAVLE,HOT SIDE TEM
Solicitation # SPRPA126QWB56
This contract solicitation, issued under EAF Emergency Acquisition Flexibilities, seeks to procure VAVLE, HOT SIDE TEM equipment with a critical application designation, meaning failure could result in mission failure or safety risks. The solicitation number is SPRPA126QWB56, posted on August 10, 2026, with a response deadline of August 24, 2026, and is governed under NAICS code 336413. Offers must originate exclusively from government-approved sources of supply; distributors must submit an authorized distributor letter on the source’s official letterhead at the time of proposal submission. Failure to comply will render offers technically unacceptable. The contract mandates adherence to multiple federal clauses including Buy American requirements, Equal Opportunity for Veterans and Workers with Disabilities, Security Prohibitions, and the mandatory use of Workflow Pro’s Assist Module. Invoices and receiving reports must follow the specified combo format, and the Navy’s use of AbilityOne contractors is referenced. The contract also includes obligations related to royalty information, priority ratings for national defense, and reporting on recovered material content per EPA guidelines. The point of contact for inquiries is Joseph Gambino, reachable via email and phone through the Department of Defense’s DLA Aviation office in Philadelphia, Pennsylvania.
Pa DLA Aviation At Philadelphia

POSTED

about 7 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336413
New
Federal
Motor, Hydraulic
Solicitation # SPRTA1-26-R-0395
The contract pertains to the procurement of hydraulic motors with NSN 1650-01-481-8040HS and part number 693427, intended for use on the B-1 aircraft. The requirement is for 15 units, with a minimum order of four and a maximum of twenty-three, to be delivered on or before April 20, 2028, and shipped to location SW3210 under TAC code FRS2. The item is a spares replacement, and the only qualified source identified is Eaton Aerospace, LLC., with CAGE code 62983. The requirement is justified under FAR 6.302 due to limited sources capable of supplying this specific military-grade component, and no competition is anticipated at this stage, though responses received within 45 days of the synopsis will be considered for potential competitive determination. The Government does not own manufacturing data rights and advises potential offerors to contact the OEM directly for access to technical data. All proposals must be submitted electronically via SAM.gov, as hard copies are not accepted. UID requirements will be enforced, and while export control restrictions do not apply, foreign-owned firms must consult with the contracting officer prior to submitting proposals due to potential eligibility limitations. The contract is dependent on the availability of appropriated funds, with no legal obligation arising until funds are formally made available and confirmed in writing. The acquisition is not set aside for small businesses or other socioeconomic categories, and surplus is not authorized. Price and past performance will jointly influence the award decision. A designated Ombudsman is available to address concerns from potential offerors during the proposal phase, with confidentiality guaranteed. Questions should be directed to Howard Heflin at howard.heflin@us.af.mil. The solicitation will be issued following the posting date of August 10, 2026, with responses due by August 25, 2026, and the anticipated award date approximately 90 days after the notice.
Ok DLA Aviation At Oklahoma City

POSTED

about 7 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336413
New
Federal
2-for-1 Heatsink Remanufacturing
Solicitation # SPRHA1-26-R-9241
The U.S. Department of Defense, through DLA Aviation at Hill Air Force Base, is seeking industry input on a potential long-term contract for the remanufacturing of carbon heatsink assemblies used on F-16, F-15, C-130, and C-5 aircraft under a 2-for-1 model, which aims to reuse condemned parts to improve supply chain efficiency and reduce costs. These heatsinks are mission-critical components integrated into aircraft brake systems and are manufactured to exact, platform-specific dimensional and material standards that limit interchangeability with commercial or non-original components. The government currently lacks unrestricted technical data rights and cannot reverse engineer the parts economically, leaving Collins Aerospace as the sole source supplier, which creates dependency and supply chain vulnerability. The goal of this request is to identify capable contractors who can establish a reliable, performance-based logistics framework to ensure continuous availability of remanufactured parts, improve warfighter readiness, reduce inventory costs, and decrease condemnation rates through enhanced reliability and quality control. Responses are requested from U.S.-based businesses capable of sourcing, remanufacturing, and testing these specialized components, with a strong emphasis on proven experience in aerospace supply chain management, existing qualifications from relevant aviation suppliers, and compliance with stringent aerospace quality standards such as AS9100 and NADCAP. The solicitation requires detailed information on technical access, test and warehousing capabilities, workforce capacity, transition timelines, and QA processes, along with certification status in SAM and WAWF. Foreign participation is prohibited at the prime level, all submissions must be in English and U.S. dollars, and while the government does not intend to pay for responses or commit to a contract based on this effort, the collected information will directly inform future acquisition strategies. Proposals must be submitted via email by the deadline, and no obligation is created for the government by receiving or using the data provided.
Ut DLA Aviation At Ogden

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
Support Assy and Shim
Solicitation # 70Z03826QJ0000157
The United States Coast Guard’s Aviation Logistics Center intends to award a sole source Basic Ordering Agreement to Sikorsky Aircraft Corporation, the Original Equipment Manufacturer, under CAE Code 78286, for the procurement of two specific aviation components: a Support Assembly (NSN 1560-01-HS2-2867, Part Number 70307-82010-041) in a quantity of 48 units, and a Shim (NSN 5365-01-343-9769, Part Number 70305-22117-101) in a quantity of 16 units. This action is classified under NAICS Code 336413 with a small business size standard of 1,250 employees, but the requirement is unrestricted as the small business set-aside has been dissolved. The procurement is justified under FAR 12.102(a) due to the items being available from only one source, and no formal solicitation package will be issued. Interested parties may submit quotations via email to Julie.G.Lininger@uscg.mil and mrr-procurement@uscg.mil with the solicitation number 70Z03826QJ0000157 in the subject line, with the final response deadline extended to July 29, 2026, at 2:00 PM EDT. Award will be based solely on the determination of fair and reasonable pricing, and the Government retains full discretion on whether to proceed with a sole source award. Delivery is required within 200 days after receipt of order, with a requested delivery date of March 1, 2027, for both items, and early shipments are encouraged at no additional cost to the Government. The F.O.B. point is origin, with quotes defaulting to F.O.B. Destination unless F.O.B. Origin is explicitly stated and shipping costs are included. Inspection and acceptance will be conducted at origin by the Defense Contract Management Agency. Offerors must maintain an active SAM registration, though certain representations required by SAM, including those under 52.212-3(d), 52.212-5 paragraphs (e)(1)(ii)(I), (e)(1)(ii)(J), (b)(33), (b)(
Aviation Logistics Center (ALC)(00038)

POSTED

about 7 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → DLA Aviation Oklahoma City

Same awarding agency

NAICS: 336412
New
Federal
FD2030-26-02504
Solicitation # FD2030-26-02504
The contract pertains to the procurement of a nozzle, augmenter ex with NSN 2840-01-308-4466NZ, governed by top drawing 4070067 and adhering to EDL revision 9 dated 18 May 2026, with an MDC code of WGA. The technical lead for this requirement is RAUGUST, MATHEW E. The contract is solicited under reference FD2030-26-02504, posted on 10 August 2026, with a response deadline of 10 August 2027 at 16:00 UTC. It falls under NAICS code 336412, indicating a focus on aircraft engine and engine parts manufacturing, and is managed by the Department of Defense through DLA Aviation Oklahoma City under the subcommand structure. No specific place of performance or point of contact details are provided, and the solicitation is issued as a special notice with no set-aside classification applied.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 months
View Details
NAICS: 336413
New
Federal
FD2030-26-02079
Solicitation # FD2030-26-02079
The contract pertains to an electromechanical actuator identified by NSN 1680-00-284-2402RK and drawing number 631000-02, with technical specifications governed by EDL Revision 4 dated 12 May 2026 and classified under MDC Code ELG. The solicitation, titled FD2030-26-02079, was posted on 5 August 2026 and requires responses no later than 16:00 on 5 August 2027, offering a one-year window for submissions. The North American Industry Classification System code 336413 designates the procurement within the aerospace product and parts manufacturing sector. The procuring entity is the Defense Logistics Agency Aviation in Oklahoma City under the Department of Defense, operating as a Sub Command. The point of contact for this solicitation is Michael S. Falconer, and the action is categorized as a special notice with no set-aside provisions applied. Performance location and specific delivery details are not specified in the provided data.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

5 days ago

DEADLINE

in 12 months
View Details
NAICS: 336412
New
Federal
FD2030-26-02484
Solicitation # FD2030-26-02484
The contract pertains to the procurement of a nozzle segment for turbine applications, identified by NSN 2840-01-455-9142NZ and drawing number 4088060, with the engineering drawing revision set to 24 dated October 30, 2025. The item is categorized under MDC code WAA and is associated with Michael S. Falconer as the IM name. The solicitation is issued under contract title FD2030-26-02484 with the same solicitation number, posted on August 4, 2026, and requires responses by August 4, 2027. It falls under NAICS code 336412, indicating a focus on aerospace product and parts manufacturing, and is classified as a special notice issued by the Department of Defense through DLA Aviation Oklahoma City, under the Sub Command organizational structure. There is no set-aside designation specified, and no detailed point of contact or performance location information is provided in the data.
Aircraft Engine and Engine Parts Manufacturing

POSTED

6 days ago

DEADLINE

in 12 months
View Details
NAICS: 336413
New
Federal
FD2030-27-00118
Solicitation # FD2030-27-00118
The contract pertains to the procurement of a Cylinder Assembly, A with NSN 1650-00-723-1891 and top drawing 2-43140-1, governed by EDL revision 10 dated 04 AUG 2026 and classified under MDC code EFA. The contract is formally identified as FD2030-27-00118, with the solicitation number matching, posted on August 4, 2026, and requiring responses no later than August 4, 2027, at 16:00 UTC. The NAICS code 336413 indicates this is related to aircraft engine and engine parts manufacturing. The procuring entity is DLA Aviation Oklahoma City under the Department of Defense, operating as a sub command with no designated point of contact information listed. The place of performance and specific delivery location are not detailed, and the contract carries no set-aside designation for small businesses or other categories. The technical specification is under the stewardship of TOWLER, KENNITH D.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

6 days ago

DEADLINE

in 12 months
View Details
NAICS: 336413
Federal
FD2030-27-00104
Solicitation # FD2030-27-00104
The contract seeks a servovalve, hydraulic, identified by NSN 1650-00-118-0865 and governed by top drawing 5-83957-506, with engineering data revision 5 dated 03 AUG 2026 and MDC code EFG. The procurement is issued under solicitation number FD2030-27-00104, posted on 03 AUG 2026, with proposals due by 16:00 UTC on 03 AUG 2027. It falls under NAICS code 336413, targeting the aerospace manufacturing sector, and is managed by the Department of Defense through DLA Aviation Oklahoma City under the Sub Command organizational structure. The point of contact information is unspecified, and the place of performance details are not provided, though the contract is intended for defense-related applications requiring precise hydraulic control components. The contract type is classified as a special notice and is not subject to a specific small business set-aside designation.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

7 days ago

DEADLINE

in 12 months
View Details
NAICS: 336413
Federal
FD2030-27-00137
Solicitation # FD2030-27-00137
The contract pertains to the procurement of a mechanical transmission identified by NSN 1680-01-142-7632RK, with the top drawing reference NF53302-01B and MDC code EME, under an EDL revision dated 09 FEB 2026. It is issued under solicitation number FD2030-27-00137 and is classified as a special notice with a NAICS code of 336413, indicating it relates to aerospace product and parts manufacturing. The contracting activity is managed by DLA Aviation Oklahoma City, a division of the Department of Defense, and the responsible point of contact is LAWRENCE, JACEY B. The solicitation was posted on August 3, 2026, with a firm response deadline of August 3, 2027, at 4:00 PM. The contract does not specify a set-aside type or geographic place of performance, and no office address details are provided, suggesting the award may support a broader defense logistics requirement without localized constraints.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

7 days ago

DEADLINE

in 12 months
View Details
NAICS: 336412
Federal
FD2030-26-02434
Solicitation # FD2030-26-02434
The contract pertains to the procurement of a CONE, EXHAUST AIRCRA with NSN 2840-01-347-7857OJ, governed by top drawing 23052623 and subject to EDL revision 6 dated 24 FEB 2026, with MDC code RTS indicating its logistics and maintenance classification. The item is associated with Nguyen, Nguyen N as the IM name, suggesting responsibility for inventory management or technical oversight. The contract, identified by title and solicitation number FD2030-26-02434, was posted on July 28, 2026, with a response deadline of July 28, 2027, and is classified as a special notice under NAICS code 336412, which corresponds to aircraft engine and engine parts manufacturing. The issuing organization is DLA Aviation Oklahoma City under the Department of Defense, operating as a sub command, with no specific place of performance or point of contact provided. The procurement is not designated for any specific set-aside program and is accessible via the SAM.gov portal.
Aircraft Engine and Engine Parts Manufacturing

POSTED

13 days ago

DEADLINE

in 12 months
View Details
NAICS: 335931
Federal
FD2030-27-00115
Solicitation # FD2030-27-00115
The contract solicitation FD2030-27-00115 seeks a junction box identified by NSN 5975-01-248-9934FG and drawing number 675-22404-501, with technical specifications governed by EDL revision 2 dated 28 JUL 2026 and MDC code NPG. The requirement is managed by the Department of Defense through DLA Aviation Oklahoma City under the NAICS code 335931, targeting specialized electrical components for defense applications. The opportunity was posted on 28 JUL 2026 and proposals must be submitted by 16:00 UTC on 28 JUL 2027, with no specific small business set-aside designated. Victoria K. Wood is listed as the point of contact for administrative matters, and performance is expected to align with broader国防部 logistics requirements, though no specific delivery location is detailed in the public data. All submissions must comply with the technical and procedural standards outlined in the referenced documentation and federal procurement regulations.
Current-Carrying Wiring Device Manufacturing

POSTED

13 days ago

DEADLINE

in 12 months
View Details
NAICS: 336412
Federal
FD2030-26-02466
Solicitation # GF2030-26-02466
The contract pertains to the procurement of an aircraft air seal, identified by NSN 2840-01-276-9822NZ and noun SEAL, AIR, AIRCRAFT G, with a top drawing reference of 4071088 and an EDL revision dated March 26, 2026. The MDC code WC9 indicates specific material or manufacturing specifications, and the contract is managed under the name JACKSON, SHERRY A. The official title is FD2030-26-02466, with a corresponding solicitation number GF2030-26-02466, posted on July 27, 2026, and a response deadline of July 27, 2027. The NAICS code 336412 classifies this as aircraft engine and engine parts manufacturing, under the Department of Defense, specifically administered by DLA Aviation Oklahoma City. The procurement falls under a special notice type with no set-aside designation, and the place of performance and point of contact details are not specified.
Aircraft Engine and Engine Parts Manufacturing

POSTED

14 days ago

DEADLINE

in 12 months
View Details
NAICS: 336413
Federal
FD2030-27-00136
Solicitation # FD2030-27-00136
The contract under solicitation number FD2030-27-00136 pertains to a Control Assembly, QU, identified by NSN 1680-01-383-7696YQ and governed by TOP DRAWING 68A582101-1005 with an EDL revision dated 24 JUL 2026. The item is classified under MDC code EME and is managed by LAWRENCE, JACEY B. This opportunity is issued by the Department of Defense through DLA Aviation Oklahoma City under NAICS code 336413. The solicitation was posted on 24 JUL 2026 and requires responses no later than 16:00 on 24 JUL 2027. The contract type is listed as a special notice with no set-aside designation applied. Performance location and point of contact details are not provided in the available data. The full solicitation can be accessed via the official SAM.gov workspace link.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

17 days ago

DEADLINE

in 12 months
View Details
NAICS: 336412
Federal
FD2030-24-02049-01
Solicitation # FD2030-24-02049-01
The contract references a seal component designated by NSN 2840-01-320-6432NZ, classified as a SEAL, AIR, AIRCRAFT G, with the top drawing number 4076459 and an EDL revision dated 19 FEB 2026. The MDC code WAK identifies the manufacturing or maintenance standard applicable to the part, and the IM NAME field lists HANSON-WHEELER, JERRI L as the responsible individual. The contract is identified by the title and solicitation number FD2030-24-02049-01, issued under NAICS code 336412, which corresponds to aircraft engine and engine parts manufacturing. It was posted on 24 JUL 2026 with a response deadline of 24 JUL 2027, and is categorized as a special notice under the Department of Defense, specifically managed by DLA Aviation Oklahoma City. There is no specified set-aside type, and no point of contact or performance location details are provided. The official record can be accessed through the provided SAM.gov link.
Aircraft Engine and Engine Parts Manufacturing

POSTED

17 days ago

DEADLINE

in 12 months
View Details
NAICS: 336412
Federal
FD2030-27-00078
Solicitation # FD2030-27-00078
The contract pertains to the procurement of a liner for an augmentor component, identified by NSN 2840-01-190-6881PR and drawing number 5054M24G01, with the latest revision dated 23 July 2026 and MDC code AAL. It is officially titled FD2030-27-00078 and was posted on 23 July 2026 with a response deadline of 23 July 2027, indicating a one-year window for submission. The solicitation is categorized as a special notice under NAICS code 336412, which corresponds to aircraft engine and engine parts manufacturing. The procurement is managed by the Department of Defense through DLA Aviation Oklahoma City, operating under the Sub Command structure, with Jon B Kalsu listed as the point of contact. The place of performance and specific office address details are not provided, and no set-aside classification is stated, suggesting this is an open competition. All relevant documentation and submission instructions can be accessed via the provided SAM.gov link.
Aircraft Engine and Engine Parts Manufacturing

POSTED

18 days ago

DEADLINE

in 12 months
View Details