Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

FILTER, LIGHT, UTILIT

Active
SPE4A6-26-T-16FLFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE4A6-26-T-16FL is a total small business set-aside procurement issued by the ASC Commodities Division of the Department of Defense for 19 units of general purpose utility light filters, identified by NSN 6220014794316. The contract has an estimated value of 361.00 dollars with a strict zero percent quantity variance. Deliveries are required to be shipped FOB Origin to the DLA Distribution Depot Hill at Hill AFB, Utah, with a required delivery date of June 4, 2027, and a lead time of 287 days. The contractor must adhere to rigorous quality and technical standards, including sampling methods per MIL-STD-1916 or ASQ H1331 and marking requirements per MIL-STD-129. Packaging must comply with RP001 for palletization and either ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with DFARS cybersecurity standards, specifically NIST SP 800-171 for safeguarding covered defense information.

General Info

DoD procurement of 19 utility light filters, small business set-aside, delivery by 2027.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

336320 - Motor Vehicle Electrical and Electronic Equipment ManufacturingView NAICS

Place of Performance

7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, USA

Set-Aside

SBA

Documents

(1)

Request for Quotations SPE4A6-26-T-16FL

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
MARY MUNAR
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FILTER,LIGHT,UTILIT
FILTER,LIGHT,GENERAL PURPOSE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
IDENTIFY TO:
CRITICAL APPLICATION ITEM
CONTROL PRODUCTS CORPORATION 27520 P/N 2000841-001
LUMINESCENT SYSTEMS, INC 14550 P/N 85-00399-001
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE4A6-26-T-16FL
SECTION B
PR: 7017869478 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017869478 0001 EA 19.000
NSN/MATERIAL:6220014794316
DELIVERY (IN DAYS):0287
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
7537 WARDLEIGH RD
HILL AFB UT 84056-5734
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
DDHU CML 385-519-8103
7537 WARDLEIGH RD BLDG 849W
HILL AFB UT 84056-5734
US
Need Ship Date:06/04/2027 Original Required Delivery Date:06/04/2027
SPE4A6-26-T-16FL
SECTION B
PR: 7017869478 PRLI: 0001 CONT’D

SPE4A6-26-T-16FL NSN/Part Number: 6220-01-479-4316 Quantity: 19 EA Purchase Request: 7017869478QTY: 19 Delivery: 287 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336320
New
DIBBS
LOUVER, LIGHT
Solicitation # SPE4A6-26-T-18GY
This contract is for the procurement of 1,100 light louvers under solicitation SPE4A6-26-T-18GY, identified by NSN 6210-01-479-4595. The requirement is a total small business set-aside for the Department of Defense, ASC Commodities Division. Delivery is required within 171 days, with an original required delivery date of November 29, 2026, and a need ship date of February 12, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA Master List technical and quality requirements, including specific packaging standards such as ASTM D3951 and MIL-STD-129, and palletization per RP001. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan unless otherwise specified. The item is designated as a critical application item, with associated part numbers from Therma-Tech Engineering Inc and Oshkosh Defense LLC. Inspection and acceptance will occur at the destination.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336320
New
DIBBS
PUMP, WINDOW WASHER
Solicitation # SPE7L4-26-T-6345
This contract, identified as SPE7L4-26-T-6345, is a total small business set-aside for the procurement of 831 window washer pump assemblies. The items are specified as Lawrence Technologies Inc part number 203500 and NSN 2540013859031. The agreement is issued by the Department of Defense under the agency LSO Combat Vehicles and Armament, with a required delivery date of February 23, 2027, and a delivery window of 168 days. The contract mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and MIL-STD-2073-1E. Shipping is designated as FOB Origin, with the final destination being the DLA Distribution New Cumberland facility in Pennsylvania. Key quality and technical requirements are governed by the DLA Master List, and the item is classified as a critical application item, meaning no quantity variance is permitted.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336320
New
DIBBS
LENS, LIGHT
Solicitation # SPE4A6-26-T-18HM
This contract is a solicitation for the procurement of 28 light lenses, identified by NSN 6220014766198 and part number 216-1019-230. The requirement is set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 336320. Delivery is required within 171 days, with a need ship date of February 12, 2027, and the items are to be delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. The agreement mandates strict adherence to DLA packaging requirements, MIL-STD-129 marking, and MIL-STD-2073-1E packaging data. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and the contractor must comply with CMMC Level 2 self-assessment and Covered Defense Information regulations. Technical specifications are based on Reference Drawing 95105 216-1019 Revision J, and any configuration changes require a formal engineering change proposal or request for variance.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336320
New
DIBBS
LIGHT, NAVIGATIONAL,
Solicitation # SPE4A6-26-T-18KC
This contract is for the procurement of 13 navigational lights under solicitation SPE4A6-26-T-18KC for the Department of Defense. The items are identified by NSN 6220015088223 and are designated as critical application items, with approved part numbers from Lockheed Martin Corp and Luminescent Systems, Inc. Delivery is required within 171 days, with a need ship date of February 12, 2027, and a final required delivery date of October 20, 2027. The items are to be delivered FOB Origin to DLA Distribution Warner Robins in Georgia. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and MIL-STD-2073-1E, with a specific requirement for fragile marking. Inspection and acceptance will occur at the origin. Quality assurance will follow MIL-STD-1916 or ASQ H1331 sampling plans, requiring zero non-conformances for acceptance unless otherwise specified. Additionally, the contract incorporates DLA master technical and quality requirements and notes that covered defense information potentially applies.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336320
New
DIBBS
MOUNTING BASE, LIGHT, MA
Solicitation # SPE8E7-26-T-3591
This contract, identified as SPE8E7-26-T-3591, is a solicitation from the Defense Logistics Agency for one clearance marker light mounting base, part number 10725, manufactured by Truck-Lite Co Inc. The item is associated with NSN 6220011824874 and is required for delivery to Hill AFB in Utah. The required delivery date is August 11, 2026, with a delivery window of 20 days after receipt of order. The agreement mandates strict adherence to DLA technical and quality requirements, including specific documentation for source approval and packaging standards. Packaging must comply with MIL-STD-129 and RP001, with hazardous materials requiring IP025 compliance or non-hazardous items following ASTM D3951. Shipping must be conducted via traceable means, and the contract specifies a zero percent quantity variance.
Defense Logistics Agency

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336320
New
DIBBS
SWITCH, LOCK, IGNITIO
Solicitation # SPE7L5-26-T-5025
This contract is for the procurement of four ignition lock switches under solicitation number SPE7L5-26-T-5025 for the Department of Defense. The items are identified by NSN 2920-01-434-3916 and are associated with part numbers from Cargotec Sweden AB, Hiab Limited, and TVS Supply Chain Solutions. Delivery is required within 94 days of the order, with a need ship date of November 30, 2026, shipping FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards per MIL-STD-129 and MIL-STD-2073-1E. There are explicit prohibitions against the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Inspection and acceptance will take place at the destination.
LAND SUPPLIER OPNS ENGINES

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336320
New
DIBBS
VALVE, HEATER CONTRO
Solicitation # SPE7L1-26-U-0595
This contract, identified as SPE7L1-26-U-0595, is a solicitation for the procurement of 70 heater control valves with NSN 2540-01-576-2914 and part number RDH RD5-8193-6 from Daimler Truck North America LLC. The requirement is issued by the Department of Defense Land Supply Chain as a total small business set-aside under NAICS code 336320. Delivery is required within 80 days after the order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging requirements, specifically RP001 and MIL-STD-129 for marking and labeling. Depending on the hazardous status of the material per FED-STD-313, packaging must follow either TQ requirement IP025 or ASTM D3951. All technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the estimated order of 70 units.
LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336320
New
DIBBS
PUMP, WINDOW WASHER
Solicitation # SPE7L1-26-U-0596
This contract is for the procurement of 26 windshield washer pumps, identified by NSN 2540-01-576-7115 and Daimler Truck North America part number FLM 066011A. The order is issued by the Department of Defense Land Supply Chain under solicitation SPE7L1-26-U-0596 and is designated as a total small business set-aside. Delivery is required within 80 days, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The supplier must adhere to specific DLA technical and quality requirements, including RP001 for packaging and MIL-STD-129 for marking and labeling. Packaging must comply with ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials. All supplies must be free of government identification if not accepted, and the contract follows the DLA Master List of Technical and Quality Requirements for procurement standards.
LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336320
New
DIBBS
LIGHT, LANDING, AIRCR
Solicitation # SPE4A7-26-T-666N
This contract is for the procurement of one aircraft landing light, identified by NSN 6220015275231 and part number S2055-1 from Soderberg Manufacturing Company, Inc. The agreement is designated as a critical application item under solicitation SPE4A7-26-T-666N, with a required delivery date of April 11, 2027, and a need ship date of February 12, 2027. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under RP001 and MIL-STD-129, and cybersecurity compliance via CMMC Level 2 self-assessment. Quality assurance is governed by zero-based sampling plans according to MIL-STD-1916 or ASQ H1331. Additionally, the supplier must comply with regulations regarding the removal of government identification from non-accepted supplies and specific physical item marking requirements.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336320
New
DIBBS
LIGHT, NAVIGATIONAL,
Solicitation # SPE4A7-26-T-660U
This contract is for the procurement of seven navigational lights, identified by NSN 6220-00-679-5629 and part number 3095-00 from Aerospace Lighting Corporation. The order is designated as a total small business set-aside under NAICS code 336320, with a required delivery date of March 11, 2027, and a delivery timeline of 171 days after order. Shipping is FOB origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot Oklahoma at Tinker AFB. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards such as MIL-STD-129 and RP001. Quality assurance will be conducted using sampling methods based on MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. The contract also specifies requirements for bare item marking and the removal of government identification from non-accepted supplies.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336320
New
DIBBS
STARTER, ENGINE, ELECTRI
Solicitation # SPE7L1-26-T-973R
This contract is for the procurement of electrical engine starters, specifically Cummins Power Generation Inc. part number 3604677RX, under NSN 2920014709867. The solicitation includes two line items, each for a quantity of one unit, with a required delivery timeframe of five days after order. Shipping is FOB Origin, and the items are destined for military distribution points at Lewis McChord, Washington, and Fort Bliss, Texas. Strict adherence to DLA packaging and marking standards is required, including MIL-STD-129 and MIL-STD-2073-1E. The product must be wrapped in specified materials, placed in a heat-sealed watervaporproof barrier bag, and secured with weather-resistant fiberboard die-cut cushioning within a reinforced corrugated fiberboard container. Mercury or mercury compounds are strictly prohibited in the packaging process. All shipments must be sent via traceable means, and parcel post is prohibited.
LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336320
New
DIBBS
LIGHT, NAVIGATIONAL, AIR
Solicitation # SPE4A6-26-T-17PC
This contract is for the procurement of 24 units of aircraft navigational lights, identified by NSN 6220001765285 and part number MS25219-12. The items must adhere to technical specifications MS25219J and MIL-L-6723C. Delivery is required within 171 days, with a need ship date of February 12, 2027, and an original required delivery date of March 5, 2027. The shipment is designated as FOB Origin and will be delivered to DLA Distribution San Diego. Quality and packaging requirements are strictly governed by DLA master lists, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. The contract specifies a zero percent quantity variance and requires compliance with specific DLA packaging and identification standards, including the removal of government identification from non-accepted supplies.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 336413
New
DIBBS
CONTROL, ALARM
Solicitation # SPE4A6-26-T-17PV
This contract is for the procurement of alarm control units, identified as commercial off the shelf critical application items from Eldec Aerospace Corp under part number 1-899-15 and NSN 6340001150701. The total quantity requested is 58 units, split between two line items of 16 and 42 units. Delivery is required within 171 days after order, with a need ship date of February 12, 2027, and an original required delivery date of October 26, 2028. The agreement specifies FOB Origin shipping with inspection and acceptance occurring at the destination. Shipments are directed to DLA Distribution Depot Hill in Utah and DLA Distribution Warner Robins in Georgia. Compliance requirements include CMMC Level 2 self assessment, adherence to MIL-STD-129 for marking, and specific DLA packaging and palletization standards. This is a total small business set-aside under NAICS code 336413.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
STUD, TURNLOCK FASTENER
Solicitation # SPE4A6-26-T-17SX
This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-17SX, is for the procurement of 416 turnlock fastener studs. The item is identified as a commercial product with part number 98264-4-410 and national stock number 5325-00-687-5193, manufactured by Monadnock Co. The place of performance is designated as Tinker AFB. The contract requires adherence to DLA packaging requirements and specific technical and quality standards as outlined in the DLA Master List. Delivery is required within 171 days after the order is received. Interested parties must respond by the deadline of August 24, 2026, and can contact Tyler Greene for further information.
Hardware Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-18ND
This contract is a solicitation for the procurement of 228 special purpose electrical cable assemblies, identified by NSN 5995-01-599-3052. The requirement is designated as a critical application item and is set aside for Service-Disabled Veteran-Owned Small Businesses. Delivery is required within 171 days, with a need ship date of February 12, 2027, and a final required delivery date of July 25, 2027. The items are to be delivered FOB Origin to the DLA Distribution Red River facility in Texarkana, Texas. The contract mandates strict adherence to several technical and quality standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Additionally, the provider must comply with Cybersecurity Maturity Model Certification CMMC Level 2 self-assessment and various DLA master list technical requirements. Configuration change management and source approval request documentation are also required.
Other Electronic Component Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332721
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-17QU
This contract is a solicitation for the procurement of 268 machine bolts under NSN 5306-00-182-1855. The items are designated as critical application hardware and must adhere to specific technical standards, including NASM3 through NASM20 and NASM6812. Quality assurance requires dimensional conformance for Class 3A and 3B threads per FED-STD-H28/20 and sampling conducted according to MIL-STD-1916 or ASQ H1331. Physical identification and marking must comply with MIL-STD-130N, and the material has no shelf life requirement. The delivery is set for 171 days after order, with a required delivery date of May 28, 2027, shipping FOB Origin to DLA Distribution Cherry Point in North Carolina. Packaging must follow ASTM D3951 and MIL-STD-129, with palletization adhering to DLA packaging requirements. This is a total small business set-aside under NAICS code 332721, managed by the Department of Defense ASC Commodities Division.
Precision Turned Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAR
Solicitation # SPE4A6-26-T-18ME
This contract is for the procurement of 206 shear bolts, identified by NSN 5306015838163 and part number MS14181-03024. The items are classified as critical application items and must adhere to the technical specifications of NASM14181 Revision 9. Delivery is required within 171 days, with a need ship date of February 12, 2027, and a final required delivery date of June 23, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The agreement incorporates several DLA technical and quality requirements, including specific packaging standards under RP001 and MIL-STD-2073-1E, and marking requirements per MIL-STD-129. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan unless otherwise specified. Inspection and acceptance will take place at the destination. The contract allows for no quantity variance, meaning exactly 206 units must be supplied.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE4A6-26-T-17LH
This contract is for the procurement of plain hexagon nuts, specifically part number MS51968-23 with thread class 2B, conforming to specifications FF-N-836 and MS51968. The order consists of 118 packages, with each package containing 5 units. The items are classified as commercial products and are designated as critical application items. Manufacturing must adhere to the current revision of the applicable part standards, and the contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware or packaging. The agreement specifies a delivery timeframe of 171 days, with a required delivery date of March 28, 2027, shipping FOB Origin to the DLA Distribution New Cumberland facility. Quality assurance will be managed through destination inspection and acceptance, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Additional quality and technical mandates are incorporated via the DLA Master List, including specific requirements for bare item marking and the removal of government identification from non-accepted supplies.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-17BB
This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-17BB, is for the procurement of 102 flat washers identified by NSN 5310-00-801-6723. The contract requires delivery within 221 days after order and is categorized under NAICS code 332722. Performance is located in New Cumberland, Pennsylvania, and the primary point of contact is Sibel Claywell. The contract is subject to strict technical and quality requirements, including DLA packaging standards, physical item marking, and the removal of government identification from non-accepted supplies. Notably, the technical data is subject to export controls under ITAR or EAR regulations, meaning it cannot be exported or disclosed to foreign nationals without prior authorization. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DOD export-control training.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 213113
New
DIBBS
BEARING, BALL, ROD EN
Solicitation # SPE4A6-26-T-18KS
This contract is for the procurement of three ball rod end bearings, identified by NSN 3110-01-529-2501 and part number MSSKE6DSC. The items are designated as critical application components and must adhere to specific technical and quality requirements, including configuration control and precise thread gaging per SAE AS8879 or MIL-S-7742. Delivery is required within 171 days, with inspection and acceptance occurring at the origin. A significant requirement of this solicitation is the domestic sourcing restriction, which mandates that the bearings be manufactured in the United States, its outlying areas, or Canada. Additionally, at least 50 percent of the total cost of the bearing components must be from these regions. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials to be considered for the award. Packaging and marking must comply with MIL-STD-129, MIL-STD-2073-1E, and MIL-DTL-197M.
Support Activities for Coal Mining

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HEXAG
Solicitation # SPE4A6-26-T-17LV
This solicitation is for the procurement of 267 self-locking hexagon nuts under contract number SPE4A6-26-T-17LV for the Department of Defense ASC Commodities Division. The items must be manufactured according to current military or consensus non-government part standards, with a delivery requirement of 171 days after receipt of order. Performance is based in Jacksonville, Florida, and the procurement is conducted as fully competitive. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging, bare item marking, and the removal of government identification from non-accepted supplies. Quality assurance involves inspection and acceptance at origin using zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds unless specifically exempted for functional purposes.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-17ZP
This contract is for the procurement of 34 sleeve bushings, identified by NSN 3120-01-168-4477 and part number AM2667-2-5. The items are designated as critical application items and must be manufactured according to TDP Rev A Gen 1 and QAP 13873. Because the manufacturing process may require specific casting or forging tooling that the government does not possess, suppliers are advised to coordinate with DLA Aviation or Land and Maritime Supply Chains for tooling and material assistance. The agreement mandates strict adherence to DLA packaging requirements, MIL-STD-129 marking, and MIL-STD-2073-1E packaging data. Quality assurance is governed by zero-based sampling plans per MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Delivery is set for 171 days after the order, with a required delivery date of June 14, 2027, shipping to the DLA Distribution Depot Oklahoma at Tinker AFB.
Ball and Roller Bearing Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAR
Solicitation # SPE4A6-26-T-17YR
This contract is for the procurement of 4,428 shear bolts, identified by NSN 5306-01-130-8993 and part number NAS6604-5. The items are classified as critical application hardware and must be manufactured according to the current revisions of NAS6603 through NAS6620 and NAS4002. Delivery is required within 171 days, with a need date of February 12, 2027, shipping FOB Origin to the DLA Distribution Depot at Tinker AFB, Oklahoma. Quality assurance requires dimensional conformance for Class 3A and 3B threads per FED-STD-H28/20 and sampling in accordance with MIL-STD-1916 or ASQ H1331. Strict adherence to DLA packaging requirements, MIL-STD-129 marking, and MIL-STD-130N identification is mandatory. Inspection and acceptance will take place at the destination, and the contract specifies a zero percent quantity variance.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details