Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

This Solicitation opportunity from New York was posted on October 23, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Fire Department Improvement Project

Closed
TBDState & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238220
New
SLED
Install Pier D High Pressure Air System, NSBREM-724-A
Solicitation # N4425527RB003
Solicitation N4425527RB003 is a design-build project for the installation of a permanent high pressure air (HPA) system at Pier D, B724A of Naval Base Kitsap in Bremerton, Washington. The scope of work includes the design, construction, and commissioning of the system, specifically incorporating the existing HPA cross connection into a system supplied by HPA compressors on the south end of Pier D. The project requires the installation of HPA shore risers at five specific locations: East bollards 11, 59, and 101, and West bollards 47 and 59. All new piping must be installed under service grates with valves located topside. The project must adhere to Unified Facilities Criteria (UFC), ASME, and MIL-STD101C standards, with the most stringent requirement governing in the event of discrepancies. This is a 100% set-aside for 8(a) businesses located within SBA Region X, with an estimated construction magnitude between 1 million and 5 million dollars. The contract is a firm-fixed-price task order under an 8(a) Multiple Award Construction Contract (MACC), with a period of performance of 538 calendar days from award. Award will be based on price and MACC past performance. Key requirements include compliance with EM 385-1-1 safety standards, Davis-Bacon wage rates, and strict security protocols for base access and the handling of government data. Deliverables include a cost-loaded Network Analysis Schedule, comprehensive O&M data packages, and a Facility Data Workbook.
Bristol Alliance of Companies

POSTED

about 5 hours ago

DEADLINE

in 14 days
NAICS: 238220
New
CBP#9772 HVAC Air Handling Unit (AHU) and Ductwork Cleaning Services
Solicitation # CBP#9772
Solicitation CBP#9772 is a subcontracting opportunity issued by Management & Training Corporation (MTC) for comprehensive HVAC Air Handling Unit (AHU) and ductwork cleaning services at the Edison Job Corps Center in Edison, New Jersey. The project focuses on restoring airflow and heat-transfer efficiency for the Kilmer and Edison dormitories by cleaning twelve AHUs, twenty-eight heating and cooling coils, and all associated supply, return, and outside-air ductwork. The contractor is responsible for providing all labor, equipment, and materials, including the installation of permanent access panels and the restoration of any affected building finishes. The estimated contract value ranges from $100,000 to $250,000, structured as a fixed-price, single lump sum contract with a performance period of 90 consecutive business days following the Notice to Proceed. Bids are due by November 17, 2026, and will be awarded based on overall best value. Mandatory requirements for consideration include a physical site visit, a detailed cost breakout, and the submission of a bid bond guarantee equal to 20% of the base bid for projects valued at $25,000 or more. Awarded contractors must comply with Davis-Bacon prevailing wage determinations for Middlesex County and provide performance and payment bonds. The opportunity is open to various SBA-certified small business categories, including VOSB, SDVOSB, WOSB, and HUBZone. Final acceptance is contingent upon a project completion report, post-cleaning photographs, operational verification records, and the submission of Operation and Maintenance manuals.
Edison Job Corps

POSTED

about 5 hours ago

DEADLINE

in about 8 hours
NAICS: 238220
New
CBP7787 ED1 RM 123 HVAC Compressor Replacement
Solicitation # CBP7787 ED1 RM 123
Management & Training Corporation (MTC) is seeking bids for a fixed-price, single lump sum subcontract to replace a failed HVAC/refrigeration compressor at the Sierra Nevada Job Corps Center in Reno, Nevada. The project, identified as CBP7787 ED1 RM 123, has an estimated value between 0 and 25,000 dollars. The scope of work is divided into four phases: preparation and environmental safety, including refrigerant recovery per EPA Section 608 regulations; demolition and removal of the failed unit; installation of an OEM-specified compressor and associated components; and system testing and commissioning. Bids are due by November 17, 2026, and require a mandatory physical site visit and signature on the attendance roster prior to submission. Award will be based on overall best value, with MTC serving as the sole judge of responsiveness. Bidders must provide a detailed cost breakout on their own letterhead. While bid bonds are not required for projects under 25,000 dollars, any bid equal to or exceeding that amount requires a bid bond guarantee of 20 percent from a surety company with at least an A- rating. Contractors must maintain general liability insurance of at least 1,000,000 dollars and worker's compensation with employer's liability limits of 500,000 dollars. Compliance with Washoe County wage determinations and various FAR clauses regarding safety, overtime, and small business representations is required. Final payment is contingent upon a successful final inspection and the submission of closeout documentation, including a certified payroll report and a certificate of release of liens.
Sierra Nevada Job Corps Center

POSTED

about 5 hours ago

DEADLINE

in about 11 hours
NAICS: 238220
New
MJCC Multiple HVAC Replacement System
Solicitation # mjcc-multiple-hvac-replacement-system
The Montgomery Job Corps Center, through Education and Training Resources (ETR), is seeking quotes for a turnkey subcontracting project to replace multiple HVAC systems at its facility in Montgomery, Alabama. The scope of work involves the removal of existing equipment and the installation, testing, and commissioning of new units across several buildings, including Building A (4-ton), Building B (7.5-ton), Building E (10-ton), Building F (two 4-ton units), and Building G (various units ranging from 3.5 to 7.5 tons). Technical specifications for certain units require Energy Star certification, a minimum EER rating of 16, 90 percent efficiency furnaces, and the use of R-454B refrigerant. All work must comply with the National Electrical Code, NFPA Standard No. 101 Life Safety Code, and OSHA regulations. The project requires a 5 to 10 year warranty on equipment parts and a 2 year warranty on workmanship. Interested bidders must be registered in SAM.gov with a Unique Entity ID and provide Alabama business licenses, certificates of insurance, a W-9, and a completed FFATA form. Submission requirements include a detailed bid sheet with a cost breakdown, a proposed performance schedule, and an Anti-Lobbying Certification. The Davis-Bacon Act applies, necessitating the payment of prevailing wages and submission of certified payroll. Bonding requirements are tiered based on project value: projects between 35,000 and 150,000 dollars require a 100 percent payment bond and additional protection, while projects exceeding 150,000 dollars require both 100 percent performance and payment bonds. Bids close on November 27, 2026, at 12:00 PM CST, and award selection is at the sole discretion of ETR.
Montgomery Job Corps Center

POSTED

about 5 hours ago

DEADLINE

in 10 days
NAICS: 238220
New
Joliet Job Corps-Request for Quote HVAC Replacement Female Dormitory
Solicitation # joliet-job-corps-request-quote-hvac-replacement-female-dormitory
Management & Training Corporation (MTC), operating the Joliet Job Corps Center for the U.S. Department of Labor, is soliciting bids for a fixed-price, single lump sum subcontract to replace the HVAC system in the female dormitory. The project scope includes the removal and disposal of existing equipment and the installation of ten new Carrier furnace and air conditioning systems. Additionally, the contractor must install and integrate a Pelican Building Automation System (BAS) across eleven units, including the ten new systems and one existing unit. The estimated contract value ranges from $250,000 to $500,000, with work performed at 1101 Mills Road, Joliet, Illinois. Bids must be submitted to Frances McGraw by November 23, 2026, and must include a detailed cost breakout on company letterhead and the MTC Bid for Lump Sum Contract form. A mandatory physical site visit and signature on the attendance roster are required prior to bid submission. For bids of $25,000 or more, a bid bond of 20% of the base bid is required, and the awarded contractor must provide performance and payment bonds from a surety company with at least an A- rating. Award decisions will be based on overall best value. The contract is subject to the Davis-Bacon Act, requiring compliance with specific Illinois prevailing wage rates and the submission of weekly certified payroll reports for payment. Contractors must maintain general liability insurance of at least $1,000,000 per occurrence and worker's compensation with employer's liability limits of $500,000. Compliance with various Federal Acquisition Regulations is required, including Buy American and anti-trafficking provisions. Final acceptance is contingent upon a joint site inspection, the submission of a Notice of Final Completion, and the delivery of two sets of operation and maintenance manuals along with manufacturer and workmanship warranties.
Joliet Job Corps

POSTED

about 5 hours ago

DEADLINE

in 6 days
NAICS: 238220
New
Centennial Dry Sprinkler System & Compressor Replacement Services
Solicitation # centennial-dry-sprinkler-system-compressor-replacement-services
Management & Training Corporation (MTC) is soliciting bids for a fixed-price, single lump sum contract to provide dry-type sprinkler system and compressor replacement services at the Centennial Job Corps Center in Nampa, Idaho. The project focuses on eliminating severe piping leaks and replacing failing infrastructure in Building CM (Men's Dormitory), Building CW (Women's Dormitory), and Building D (Recreation). The scope of work includes the demolition and disposal of existing distribution piping and air compressors, the installation of a new code-approved piping network and properly sized compressor, and rigorous operational and leak testing. All work must adhere to NFPA 25 (2023 Edition) standards and local, state, and national codes. The period of performance is 30 consecutive business days following the written Notice to Proceed. Bids are due by December 1, 2026, and must be based on a required physical site visit. Evaluation is based on overall best value. For bids equal to or greater than $25,000, contractors must provide a bid bond guarantee of 20% of the base bid, and the awarded contractor will be required to provide performance and payment bonds from an A-rated surety. Required submission documents include a detailed cost breakout, proof of insurance, a UEI number, and a completed SF 1413 form. The contract is subject to various federal regulations, including Davis-Bacon prevailing wage rates, FAR requirements for business size certification and debarment disclosure, and Job Corps-specific mandatory training and privacy breach notification requirements. Final payment is contingent upon a joint substantial completion inspection, a final inspection, and the submission of certified payroll reports and operation and maintenance manuals.
Management & Training Corporation/Centennial Job Corps Center

POSTED

about 5 hours ago

DEADLINE

in 14 days
NAICS: 238220
New
Inland Empire Job Corps-Request for Quote HVAC Replacement Cafeteria & OA CTS
Solicitation # inland-empire-job-corps-request-quote-hvac-replacement-cafeteria-oa-cts
Management & Training Corporation (MTC) is seeking bids for a subcontracting opportunity to replace packaged HVAC units with gas heating at the Inland Empire Job Corps Center in San Bernardino, California. The project focuses on the Cafeteria and OA/CTS areas and includes the removal of existing units, refrigerant recovery per EPA regulations, installation of high-efficiency units, and the modification of gas piping, ductwork, and electrical disconnects. This is a fixed-price, single lump sum contract with an estimated value between $25,000 and $100,000. The selected contractor must complete all work within 60 consecutive business days following the written Notice to Proceed. Bids are due by November 23, 2026, and must be submitted via email to Fran McGraw. To be considered, bidders are required to conduct a physical site visit and provide a detailed cost breakout on company letterhead. For bids of $25,000 or more, a bid bond of 20% is required, and the awarded contractor must provide performance and payment bonds from an A-rated surety company. The project is subject to Construction Wage Rate Requirements, necessitating compliance with California prevailing wages and the submission of worker classifications. Additionally, contractors must provide a Unique Entity ID (UEI), self-certify their small business status, and adhere to OSHA safety standards and federal environmental regulations. Award decisions will be based on overall best value.
Inland Empire Job Corps

POSTED

about 5 hours ago

DEADLINE

in 6 days
NAICS: 238220
New
CBP7792 Cafeteria Hot Water Heater Replacement
Solicitation # CBP7792
Management & Training Corporation (MTC) is seeking bids for a fixed-price, single lump sum subcontract to replace the cafeteria hot water heater at the Sierra Nevada Job Corps Center in Reno, Nevada. The project requires a licensed plumbing contractor to isolate, remove, and dispose of an existing failing commercial natural gas-fired water heater and install a new commercial-grade 125-gallon natural gas-fired unit, specifically a Bock Model OT300N-A-H20 or an approved equivalent. The estimated contract value ranges from $25,000 to $100,000, with award decisions based on overall best value, considering price, quality, delivery schedule, and relevant experience. Bidders must submit a signed MTC Bid for Lump Sum Contract form along with a detailed cost breakout on company letterhead, proof of insurance, and three references. For bids equal to or exceeding $25,000, a bid bond guarantee of 20% of the base bid is required, and the awarded contractor must provide performance and payment bonds from an A-rated surety. Compliance with federal labor standards is mandatory, including adherence to Wage Determination NV20250040 and the submission of an SF 1413 Statement and Acknowledgement. Additionally, first-tier subcontractors with awards over $45,000 must disclose any federal debarment or suspension status per FAR 52.209-6. The contractor is responsible for all installation, testing of safety controls, and obtaining necessary inspections. Final deliverables include two sets of operation and maintenance manuals, manufacturer and installer warranties, and a final certified payroll report. Payment will be processed via pay applications using AIA G702 and G703 forms, with a standard payment term of ten days after receipt of a valid invoice. All work must comply with federal standards, including Buy American requirements and safety regulations.
Sierra Nevada Job Corps Center

POSTED

about 5 hours ago

DEADLINE

in 8 days
NAICS: 238220
New
CBP#10027 Replace Cafeteria Waste Line & Floor Restoration
Solicitation # CBP#10027
Management & Training Corporation (MTC) is seeking bids for a fixed-price, single lump sum subcontracting opportunity at the Edison Job Corps Center in Edison, New Jersey. The project, identified as CBP#10027, involves the replacement of compromised underground waste piping serving the cafeteria food line and subsequent floor restoration. The scope of work includes saw-cutting the existing floor around 3-inch drains, removing and replacing piping, backfilling, and ensuring the final system is functional and code-compliant. The estimated price range for this project is up to 25,000 dollars, with a required performance period of 30 consecutive business days following a written Notice to Proceed. Bids are due by November 16, 2026, and must be submitted to Wendy Lawrence. A mandatory physical site visit and signature on the attendance roster are required prior to bid submission. Required documentation includes the MTC Bid for Lump Sum Contract form, a detailed cost breakout on company letterhead, and the MTC Supplier Packet. For bids equal to or greater than 25,000 dollars, a bid bond of 20 percent of the base bid is required, along with performance and payment bonds from a surety company with at least an A- rating. This opportunity is open to small businesses, including certified VOSB, SDVOSB, WOSB, and HUBZone entities. The project is subject to Construction Wage Rate Requirements, necessitating compliance with prevailing wage and fringe benefit rates for Middlesex County. Award decisions will be based on overall best value, with MTC serving as the sole judge of responsiveness. Failure to complete work by the agreed date may result in liquidated damages of 100 dollars per consecutive calendar day.
Edison Job Corps

POSTED

about 5 hours ago

DEADLINE

in 18 days

AI Contract Overview

Show more

The Village of Whitesboro is seeking proposals for the Fire Station Improvement Project located at 171 Oriskany Blvd, funded by a NYS DHSES grant. The project is divided into two components: the installation of a Generac 60kW generator and comprehensive flooring improvements. Contractors may bid on one or both portions of the project. The generator scope includes site preparation, construction of a concrete pad with safety devices, natural gas and electrical connections, and full system testing. The flooring scope requires the removal of the existing topcoat, concrete repair, and the application of a durable epoxy system with reflective guidance lines and a vinyl logo. Both the generator and flooring installations must be completed within a short timeframe, with the generator taking five to seven business days and the flooring taking one week. Each portion of the work carries a three-year warranty. This project includes MWBE goals of 15 percent for minority-owned and 15 percent for women-owned business enterprises. Proposals must be submitted to the Village Treasurer by 1:00 p.m. on November 14, 2025. Interested firms are encouraged to schedule site visits between October 27 and November 4.

General Info

Whitesboro seeks proposals for fire station generator and flooring improvements by November 14, 2025.

Place of Performance

171 Oriskany Blvd Whitesboro, All NYS counties, NY, USA

Set-Aside

NONE

Documents

0

No documents available

No documents were posted with this contract.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

This one is closed. Find the next one like it.

Open contracts like this one, right now:

  • Install Pier D High Pressure Air System, NSBREM-724-AOpen now, due in 15 days
  • Water Pump ReplacementOpen now, due in 13 days
See open contracts like this

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more

Full Description

Show more
Request for Proposals for theVillage of WhitesboroVillage Fire Department Generator and Floor ImprovementsVillage of Whitesboro Fire Station Improvement ProjectThe Village of Whitesboro is interested in purchasing a generator and completing floor improvements at the Village Fire Station located at 171 Oriskany Blvd., Whitesboro NY. The Village was awarded funding through the NYS DHSES Volunteer Infrastructure and Response Equipment Grant Program to purchase a generator and make repairs to the floor at the Fire Station. Contractors may respond to one or both of the flooring and generator portions of the project.Contractors are invited to set up an appointment to tour the Fire Station prior to submitting a proposal. These visits can be coordinated by emailing Sign up to see this detail and providing available dates and times between Monday, October 27 and Tuesday, November 4.Request for ProposalsThe Village is seeking Proposals from qualified firms to purchase a generator and make improvements to the floor at the Fire Station 171 Oriskany Blvd. The following is required for each project:Generator Scope of Work:This job scope outlines the installation of a new station Generac Model RG06045X 60kW generator, connected to a 400-amp service natural gas supply. The scope includes all necessary work to ensure safe and proper installation, testing, and commissioning of the new generator.Site Preparation & Concrete Pad:• Prepare the installation site, including clearing and leveling the area to be coordinated with the Fire Chief and Mayor.• Design and construct a concrete pad specifically for the generator, meeting manufacturer and local code requirements.• Install collision safety devices in the case of a vehicle striking the generator, such safety devices will be placed at least on 4 sides of the concrete pad.Generator Installation:• Unpack and inspect the generator for damage.• Install the generator on the constructed concrete pad.• Ensure proper leveling and anchoring of the generator.Natural Gas Connection:• Install a new natural gas line underground from the existing gas meter to the generator location (if not already completed).• Connect the gas line to the generator, ensuring compliance with local codes and regulations.• Perform a gas leak test to ensure system integrity.Electrical Connection:• Install a new 400-amp transfer switch, compatible with the existing electrical service.• Determine wire size based on the National Electric Code (NEC) and manufacturer requirements.• Determine conduct size based on the National Electric Code (NEC) and local code requirements.• Connect the generator to the transfer switch, ensuring proper wiring and bonding.• Ensure the electrical connections meet the local electrical codes and regulations.Wiring and Controls:• Install all necessary wiring, controls and sensors for generator operation.• Connect the generator to the building’s automatic transfer switch (ATS) or manual transfer switch (MTS) as applicable.Testing and Commissioning:• Perform a series of tests to ensure the generator operates correctly, including No-load tests.• Load bank tests (if applicable).• Transfer switch operations tests.• Verify proper operation of safety features, such as low oil pressure shutdown and high coolant temperature shutdown.Documentation and Training:• Provide operation and maintenance manuals to the customer.• Conduct training for customer personnel on generator operations, maintenance and trouble shooting.Cleanup and Disposal:• Remove all packaging materials and dispose of them properly.• Clean up the work area, ensuring it is safe and free of debris.Specific Requirements for Model RG06045X:• Ensure the installation meets all requirements outlined in the manufacture’s documentation, including the installation manual and technical specifications.• Verify the generator’s specific electrical and gas connection requirements are met.Electrical Specifications:• Wire Size: 2/0 AWG copper.• Conduit size: 2-inch schedule 40 PVCQuality Control:• The installation will be performed in accordance with Generac’s installation manual, National Electric Code (NEC), and local codes and regulations.• A qualified technician will perform the installation and testing.Warranty and Liability:• The installation work will be warranted for a period of 3 years form completion.• The contractor will be liable for any defects or issues resulting from the installation work.Completion Timeline:• The installation is expected to be completed within 5-7 business days, depending on the complexity of the job and availability of materials.Flooring Scope of Work:Site Preparation and Storage of Equipment:• The existing topcoat for the floor will be removed to the base concrete floor.• Any damage to the floor will be repaired by the contractor.• One-quarter saw cuts will be required around drains, cleanouts and transitions.• Cracks, divots, spalls and joints filled with 100% solids epoxy motor, ground smooth after curing.• Floors will be swept and vacuumed clean on a daily basis.• The contractor will be responsible for providing any additional electrical supply other than what is capable from the fire station at no cost to the Village or Fire Department.• It will be the responsibility of the contractor to provide any additional storage for equipment and or supplies. If such storage space is needed, the container may not impede any vehicle traffic in and around the fire station. The location will be determined after consultation with the contractor and Fire Chief.• All materials and equipment shall be stored within the storage container provided by the contractor. Any hazardous materials will be secured outside the fire station.• All waste will be secured in a dumpster or other suitable waste container provided by the contractor.• All quotes should include a detailed breakdown of costs for materials, equipment, and installation required to repoint the bricks. The contractor will remove all debris from 171 Oriskany Blvd.Flooring Installation:• Any low spot on the floor shall be leveled using epoxy, the same will hold true for any cracks.• The color of the floor shall be 2 colors, which will be determined by the Chief and the Village.• Four-inch white reflective lines shall be painted for vehicle guidance using PPG Amerlock 2.• The base coat should be strong and durable, preferably using Sherwin Williams Resuprime MVB Primer or equivalent.• The top coat should be strong and durable, preferably using Sherwin Williams Resutile HTS Clear top coat or equivalent.• 1 coat of grout coat will be applied preferably using Sherwin Williams Resuflor 3746 clearly expoy coating or equivalent.• A flake coat will be applied, the color will be determined by the Chief and the Village, preferably using Sherwin Williams Resuflor 3746 epoxy coating and broadcast 1/16” vinyl chip flakes into the wet epoxy. Once dried the excess vinyl chips will be removed.• Installation of moisture mitigation primer to seal concrete and prevent moisture related issues• Embed vinyl logo and grout using clear polyaspartic resin.Quality Control:• The contractor will ensure the inside of the fire station is clean and free from all dust and debris created by the grinding and blasting of the concrete floor.• The contractor will provide all equipment, labor and materials to do the removaland resurfacing the apparatus floor.Completion Timeline:• The contractor will ensure the work is completed within 1 week from the time work has started.Warranty and Liability:• The installation work will be warranted for a period of 3 years form completion.• The contractor will be liable for any defects or issues resulting from the installation work.This project is funded by grant monies from the New York State Division of Homeland Security and Emergency Services (DHSES). As part of this grant funding, the project will be subject to the requirements of New York State Executive Law Article 15-A to promote opportunities for the participation of certified minority- or women-owned business enterprises (MWBE). The MWBE goals established for this project are 15% of the contract for MBE and 15% of the contract for WBE. Minority- and Women-Owned Business Enterprises are encouraged to submit proposals.One copy of the proposal is to be submitted via email to the Village Treasurer at Sign up to see this detail or to the address indicated below no later than 1:00 p.m. local time on Wednesday, November 14, 2025.Lisa Langdon, Village Treasurer10 Moseley StreetWhitesboro, NY 13492(315) 736-1613 Service-Disabled Veteran-Owned Set Aside: No Minority Owned Sub-Contracting Goal: 15% Women Owned Sub-Contracting Goal: 15% Due date:11/14/2025 1:00 PM Contract term: 1 week County(ies): All NYS counties Location: 171 Oriskany Blvd Whitesboro Business entities awarded an identical or substantially similar procurement contract within the past five years: none

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS