Fire Safety and Hot Work Management

The contract requires the provision of fire watch personnel to monitor construction sites for fire hazards, particularly during periods of elevated fire risk such as red-flag warnings. These personnel are responsible for enforcing strict hot work restrictions to prevent accidental ignitions and ensuring all activities involving flames, sparks, or heat sources comply with safety protocols. In addition to monitoring and enforcement, the contractor must maintain, inspect, and ensure the readiness of all fire suppression equipment on-site, including extinguishers, alarms, and other safety devices, to guarantee immediate response capability in case of emergency. The work is to be performed at construction locations under the jurisdiction of the Tulare County Association of Governments in California, aligning with standards for fire safety in high-risk environments. This is a subcontract under NAICS code 561612 for security and investigation services, issued on June 18, 2026, with the work site located in California. It does not specify geographic boundaries beyond the state, nor does it indicate the level of set-aside or competition type. The contract emphasizes proactive fire prevention, continuous equipment integrity, and real-time hazard mitigation during critical weather conditions. Performance obligations are tied directly to the physical construction sites where hot work activities occur, requiring personnel to be present and vigilant during designated high-risk windows. The point of contact and detailed performance locations are not provided, but all work must be carried out in compliance with applicable state and local fire codes as mandated by the Tulare County Association of Governments.