Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

This Solicitation opportunity from Government of Canada was posted on January 12, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Firearms Range Rental

Closed
M4000-6-3054International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 713940
SLED
Fitness Studio at 7 Pacific Coast Highway in Hermosa BeachThe City of Hermosa Beach is preparing to convert a small existing structure located at 7 Pacific Coast Highway into a fitness studio, a project that is categorically exempt from the California Environmental Quality Act under Class 3, which covers the conversion of small structures for a different use. The initiative involves no expansion of the building footprint or significant alteration beyond internal reconfiguration to accommodate fitness equipment and related amenities, ensuring compliance with state environmental exemption guidelines. The project is scheduled for a posted date in June 2026, with no formal solicitation number assigned at this time, indicating it is a forecasted initiative rather than an active procurement. Angelique Soliz, the City’s Contract Planner, serves as the primary point of contact for administrative and procedural inquiries, while Kyle Flynn, the project owner, is the key representative overseeing the development and implementation of the fitness studio. The project will fully take place within Hermosa Beach, California, with the zip code 90254 identifying the exact location. No set-aside provisions or NAICS codes have been specified, underscoring that this is an internal city-led conversion rather than a competitive bid process. Additional details and documentation can be accessed via the state’s CEQA Nexus portal using the provided project link.
City of Hermosa Beach

POSTED

about 1 month ago

DEADLINE

N/A
NAICS: 713940
SLED
Fitness Studio AION Training (ENV-2026-573-CE)The project at 2777 West Broadway in Los Angeles involves converting an existing 1,385-square-foot retail space within a multi-tenant commercial building into a fitness studio operated by AION Training, with no increase in floor area or building footprint. The site, zoned [Q]C4-2D under the Northeast Los Angeles Community Plan and part of Subarea I of the Colorado Boulevard Specific Plan, is surrounded by commercial uses to the south, west, and east, while residential areas to the north are separated by an alley. The project qualifies for a CEQA Class 11 categorical exemption as an accessory structure with minimal environmental impact and no significant cumulative effects, and it is exempt from requiring additional parking under California Government Code Section 65863.2 (AB 2097). A new non-illuminated wall sign measuring 20.5 square feet is the only physical addition to the exterior, and all operations must comply with Los Angeles Municipal Code, the Fire Code’s defensible space requirements due to the Very High Fire Hazard Severity Zone designation, and stormwater and noise regulations. The building has 14 total parking spaces, and no changes to the existing parking configuration are proposed. The project’s environmental review was completed under local authority, with no federal procurement elements, contract clauses, pricing data, or federal acquisition regulation provisions applicable, and approval was granted through a Director’s Determination based on compliance with local land use, zoning, and environmental regulations. The applicant, Marcus McDuffie of AION Training/Urban Acres, LLC, and design representative Röhme Architects, submitted the documentation for review by the City of Los Angeles Department of City Planning, with physical submission required by the stated deadline of June 15, 2026.
City of Los Angeles

POSTED

about 2 months ago

DEADLINE

N/A
NAICS: 713940
SLED
Conditional Use Permit No. 26-004 (SO CAL THUNDER, LLC)The City of Huntington Beach has issued a conditional use permit application under No. 26-004 for SO CAL THUNDER, LLC to repurpose an existing 14,000 square foot industrial building for personal enrichment activities. The request seeks approval to convert the current industrial space into a facility designed for fitness, wellness, or similar personal development uses, which would require a change in zoning designation from industrial to a use compatible with community enrichment purposes. The proposal must meet local land use regulations, including compatibility with surrounding properties, traffic impact, noise control, and parking requirements, as the nature of the proposed use is not automatically permitted within the existing zoning classification. Jennifer Ash, Associate Planner at the City of Huntington Beach, is the primary point of contact for regulatory review and public process matters related to the permit application, while Kimberly Robinson, the project applicant, represents SO CAL THUNDER, LLC and is responsible for submitting supporting documentation and addressing community feedback. The application was posted on June 8, 2026, and is part of the official planning process managed through the California Environmental Quality Act system, indicating that environmental review will be conducted to ensure compliance with state law. Public input and agency evaluations will determine whether the proposed use is approved under specific conditions to mitigate potential impacts on the neighborhood.
City of Huntington Beach

POSTED

about 2 months ago

DEADLINE

N/A

AI Contract Overview

Show more

The Royal Canadian Mounted Police (RCMP) intends to award a contract for the rental of a firearms range facility in Nova Scotia, specifically capable of supporting training with various calibers including 9mm, 5.56, 12-gauge shotguns, 40mm less lethal rounds, .308 rifle, and ERT 300 blackout rounds. The facility must accommodate up to 24 shooters per course with range lengths suitable for carbine and pistol/shotgun training, and allow for lateral movement. The contract is planned for one year with an option to extend for four additional one-year periods. The RCMP has pre-identified the Nova Scotia Rifle Association as the supplier, due to a limited number of providers in the area that meet all technical requirements. However, this notice provides a 15-calendar-day window for other suppliers to submit a Statement of Capabilities if they believe they can fulfill the requirements. If any submissions meet the criteria, a full tender process will follow. The contract falls under the Canadian Free Trade Agreement and is valued at approximately $595,000 CAD (HST extra). Criteria for the range facility include proximity to the RCMP H Division Headquarters in Dartmouth, availability for both full and half-day bookings, sufficient lane capacity, and the ability to support extended use especially during peak recertification months. The procurement invokes exceptions to typical government contracting regulations due to the unique technical requirements and limited supply options. Interested suppliers must submit their Statements of Capabilities by January 28, 2026, providing clear evidence of compliance with all specified conditions. All inquiries and submissions are to be directed to the designated RCMP contracting authority.

General Info

RCMP seeks one-year firearms range rental in Nova Scotia with specific calibers, 24-shooter capacity.

Agency

Government of Canada → Royal Canadian Mounted PoliceView Agency

NAICS

713940 - Fitness and Recreational Sports CentersView NAICS

Place of Performance

Nova Scotia, CAN

Set-Aside

NONE

Documents

(2)

202603054 Advance Contract Award Notice for Firearms Range Rental Services

PDF3 pagesacan

Préavis d'adjudication de contrat (PAC) - Location installation de tir en Nouvelle-Écosse

PDF3 pagespre-adjudication-notice

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Royal Canadian Mounted Police
Contacts1 person available
OfficeN/A
Organization / Agency
Government of Canada → Royal Canadian Mounted Police
View Agency Profile
Office AddressN/A
Contacts
Sandra BremnerContracting Authority

Full Description

Show more
1. ADVANCE CONTRACT AWARD NOTICE (ACAN) An advanced contract award notice (ACAN) is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date and time stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier. 2. DEFINITION OF THE REQUIREMENT The Royal Canadian Mounted Police (RCMP) has a requirement for the provision of rental services of a firearms range facility in Nova Scotia on an as and when requested basis. The firearms range facility must permit the firing of 9mm and 5.56 calibers, 12-gauge Shotgun shells and rifled slugs, 40mm less lethal, 308 rifle and ERT 300 blackout rounds. The proposed contract period is for a period of one year, with the option to extend the contract for four additional one-year periods. The purpose of this Advance Contract Award Notice (ACAN) is to signal the government’s intention to award a contract for these services to Nova Scotia Rifle Association. Before awarding a contract, however, the government would like to provide other suppliers with the opportunity to demonstrate that they are capable of satisfying the requirements set out in this Notice, by submitting a Statement of Capabilities during the 15 calendar day posting period. If other potential suppliers submit a Statement of Capabilities during the 15 calendar day posting period that meet the requirements set out in the ACAN, the government will proceed to a full tendering process on either the government's electronic tendering service or through traditional means, in order to award the contract. 3. Criteria for assessment of the Statement of Capabilities (Minimum Essential Requirements) Any interested supplier must demonstrate by way of a Statement of Capabilities that it meets the following requirements: 3.1 The Firearm Range Facility must be located in Nova Scotia, within daily driving distance (approximately 50 km) from RCMP H Division Headquarters located at 80 Garland Avenue, Dartmouth, NS. 3.2 The Firearm Range Facility must permit the firing of 9mm and 5.56 calibers, 12-gauge shotgun shotshells and rifled slugs, 40mm less lethal, 308 rifle and ERT 300 blackout rounds. 3.3 The Firearm Range Facility will permit the RCMP approved course of fire to be run for both service-issued handguns and long guns. 3.4 The Firearm Range Facility must permit sufficient individual lanes/firing points (capacity) to support the operational needs of training up to 24 shooters per course. Carbine training requires a minimum range length of 100 m. Pistol/shotgun/40mm requires a minimum range length of 25 m. 3.5 The Firearms Range Facility must: 3.5.1 based on range availability, allow for use by RCMP for lengthy periods of time (sometimes entire months) during recertification seasons (typically April, May, June, September and October); 3.5.2 based on range availability, allow range bookings on an as-and-when-requested basis to account for other mandatory training; 3.5.3 be available for full-day courses from 07:30 to 16:30 to allow for set-up and clean-up, and when adequate notice is provided, allow for extended training past 16:30; 3.5.4 be available for half-day bookings; and 3.5.5 on occasion, allow for use of more than one range at a time. 3.6 The Firearms Range Facility must accommodate lateral movement for Carbine/Pistol training including the 100m shooting. 4. APPLICATION OF THE TRADE AGREEMENTS TO THE PROCUREMENT This procurement is subject to the following trade agreement: - Canadian Free Trade Agreement 5. JUSTIFICATION FOR THE PRE-SELECTED SUPPLIER There is a limited number of suppliers available to provide these services in Nova Scotia. The pre-identified supplier meets all of the minimum essential requirements described in this ACAN. 6. GOVERNMENT CONTRACT REGULATIONS EXCEPTION(S) The following exception to the Government Contracts Regulations is invoked for this procurement under Subsection 6(d) - only one person or firm is capable of performing the work. 7. EXCLUSIONS AND/OR LIMITED TENDERING REASONS The following exclusion(s) and/or limited tendering reasons are invoked under the Canada Free Trade Agreement (CFTA), Article 513, b (iii): b. if the goods or services can be supplied only by a particular supplier and no reasonable alternative or substitute goods or services exist for any of the following reasons: iii. due to an absence of competition for technical reasons 8. COST ESTIMATE OF THE PROPOSED CONTRACT The estimated value of the contract, including option(s), is $595,000.00 (HST extra). 9. NAME AND ADDRESS OF THE PRE-IDENTIFIED SUPPLIER Supplier Name: Nova Scotia Rifle Association Supplier Address: PO Box 482, Dartmouth, NS B2Y 3Y8 10. SUPPLIERS’ RIGHT TO SUBMIT A STATEMENT OF CAPABILITIES Suppliers who consider themselves fully qualified and available to provide the services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements. 11. CLOSING DATE AND TIME FOR A SUBMISSION OF A STATEMENT OF CAPABILITIES The closing date and time for accepting statements of capabilities is January 28, 2026 at 2:00 p.m. Atlantic Time. 12. INQUIRIES AND SUBMISSION OF STATEMENTS OF CAPABILITIES Inquiries and statements of capabilities are to be directed to: Sandra Bremner RCMP Contracting Authority ATL_Bid_Receiving@rcmp-grc.gc.ca

More opportunities from Government of Canada → Royal Canadian Mounted Police

Same awarding agency

NAICS: 339910
New
International
Design, Production and Supply of Royal Canadian Mounted Police Challenge CoinsThe Royal Canadian Mounted Police (RCMP) is seeking to establish up to two Regional Individual Standing Offers for the design, production, and supply of customized challenge coins to recognize personnel, policing partners, and civilians who support Federal Policing operations. The standing offer period is one year with an option to extend for two additional one-year periods, and all deliveries must be completed within 45 calendar days of a call-up issuance. Only Canadian suppliers or suppliers from applicable trading partners are eligible to respond, and proposals must be submitted electronically by the stated deadline to the designated RCMP bid email address. Offers are evaluated solely on the lowest price among compliant submissions, with mandatory pass/fail criteria requiring at least two documented projects within the last two years involving custom challenge coin production of 100 or more units per order, and a verifiable quality control process that includes inspection procedures and a commitment to replace defective coins at no cost. All coins must adhere to strict physical specifications, including a circular format, RCMP crest on the reverse that cannot be altered, specific diameter and weight thresholds for small (42–46mm, minimum 35g) and large (47–51mm, minimum 46g) sizes, and must be supplied with a transparent acrylic sleeve. Enamel work must be evenly filled with no bleeding, plating must be free of peeling or bubbling, and edges must be smooth and consistent. The RCMP retains full ownership of all designs, source files, and intellectual property, and the contractor is prohibited from reproducing or reselling the coins without explicit authorization. All packaging must conform to the Government of Canada’s Green Procurement Policy, requiring materials to be reusable, returnable, or recyclable, with contractors responsible for ensuring local recycling access at delivery locations and confirming recyclability or reusability with the contracting authority. Coins must be delivered DDP Sunderland, B.C. under Incoterms 2020, with pricing structured in tiers based on quantity ordered—50–200, 201–350, and 351+ units—for both small and large sizes, with additional cost options for petal edge, diamond edge, bronze or copper plating, hard enamel, 3D designs, and design hours. Invoices must use firm unit prices in Canadian dollars, include separate line items for each pricing component, and be submitted electronically to both the Technical and Contracting Authorities. Contractors must certify compliance with the Ineligibility and Suspension Policy, confirm they
Jewelry and Silverware Manufacturing

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 517111
New
International
Cable Television services for RCMP in St. John’s NLThe Royal Canadian Mounted Police is seeking cable television services for seventy outlets at its B Division Headquarters located at 100 East White Hills Road in St. John’s, Newfoundland and Labrador, under a five-year contract term. This solicitation, identified by number 202700376, is open exclusively to Canadian suppliers and suppliers from applicable trading partners, and requires bids to be submitted electronically in three separate PDF sections—technical, financial, and certifications—with a total email size not exceeding five megabytes. Zip files and web links are prohibited, and all documentation must be submitted to ATL_Bid_Receiving@rcmp-grc.gc.ca by the deadline of August 25, 2026. The work involves supplying, installing, configuring, testing, and activating equipment for all 70 cable outlets, including set-top boxes, remote controls, cabling, and connectors, while ensuring compatibility with standard commercial televisions and supporting closed captioning without requiring individual consumer accounts. Services must include 24/7 remote technical support via phone or online, with on-site response within two business days if remote resolution fails. All equipment and services must be fully operational by September 1, 2026, and maintained through August 31, 2031. Bidders must meet mandatory technical criteria, including proof of delivery via cable, fiber, or satellite, and provide certifications regarding independent bid determination, integrity, eligibility, and compliance with Canadian procurement rules. The contract mandates adherence to Annex A (Statement of Work), Annex C (Security Requirements Checklist and Guide), and Annex D (Non-Disclosure Agreement), with security clearances required for personnel accessing sensitive areas or information. The contractor must submit invoices monthly in accordance with the Basis of Payment annex, including separate line items for each payment component, with payment contingent upon verified delivery, acceptance by the Technical Authority, and full compliance with contract terms. No insurance is specifically required, but the contractor bears full responsibility for all travel and installation costs. Only the lowest-priced responsive bid that satisfies all mandatory technical requirements will be recommended for award, with no negotiation beyond price unless authorized by the Contracting Authority, Rosalee Parsons. The agreement is governed under the Standard Acquisition Clauses and Conditions Manual, the General Conditions for Services (Medium Complexity), and the Integrity Regime administered by Public Services and Procurement Canada. Bidders must also provide their Procurement Business Number and are encouraged to register in the Indigenous Business Directory to access potential set-aside opportunities.
Wired Telecommunications Carriers

POSTED

3 days ago

DEADLINE

in 30 days
View Details
NAICS: 238220
New
International
Metering Project – Government of Canada Buildings – Regina, SaskatchewanThis contract pertains to Phase One of a two-phase procurement initiative by the Royal Canadian Mounted Police on behalf of the Government of Canada for the installation of steam, water, and electric meters in various government buildings located in Regina, Saskatchewan. The work encompasses all labor, materials, and shipping necessary to complete the installations in strict accordance with the specified technical drawings and documentation. Only Canadian contractors are eligible to participate, with bids from non-Canadian entities automatically rejected under the Policy on Reciprocal Procurement. Bidders must first meet mandatory qualification requirements outlined in the Request for Qualifications to proceed to Phase Two, where financial proposals will be solicited. Pre-qualified bidders remain eligible for 60 days from notification of qualification or contract award, whichever occurs first. The contract award will be granted to the lowest-priced compliant bid, following a Lowest-Priced Technically Acceptable selection process. All submissions must be sent via email to a designated government address, and bidders are solely responsible for monitoring the Government Electronic Tendering Service for any amendments or updates, as no notifications will be issued. Bids may be submitted in either English or French, Canada’s official languages. The contract imposes stringent insurance requirements, mandating coverage such as Commercial General Liability with limits of at least $5 million per occurrence and $10 million aggregate, Builder’s Risk insurance aligned with IBC Forms 4042 and 4047, Pollution Liability of $1 million per incident, Marine Liability with P&I coverage and waiver of subrogation, and Aviation Liability of $5 million per incident. Canada must be named as an additional insured with a waiver of subrogation and a minimum 30-day notice of cancellation clause. The project is subject to the Ineligibility and Suspension Policy administered by Public Services and Procurement Canada, which enforces supplier integrity and compliance standards. While no specific contract value, delivery schedule, or FOB terms are provided, performance is confined to Regina, Saskatchewan, and acceptance inspections will occur at the place of work. Bidders are encouraged to register in the Indigenous Business Directory to access potential set-aside opportunities under the Procurement Strategy for Indigenous Businesses. No unique entity identifier, size status, or socioeconomic certifications are required for submission, and no key personnel or organizational conflict of interest provisions are explicitly detailed.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

4 days ago

DEADLINE

in 11 days
View Details