Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

First Article Testing and Reporting Services

Active

Federal

Response Deadline10/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the Nuclear Reactor Program involves providing First Article Testing and Reporting Services to validate initial production units for prime contractors. The selected provider must use certified metrology equipment, including CMMs and micrometers calibrated to national standards, to verify dimensions against Reference Drawing 80064 S9074-AR-GIB-010/278. A formal First Article report must be delivered to the Post Award Administrator upon completion. The opportunity is a Total Small Business Set-Aside under NAICS code 541380 and is managed by the Department of Defense. Qualified bidders must maintain a certified Quality Management System to be eligible. The response deadline for this requirement is October 6, 2026.

General Info

DoD small business subcontract for nuclear reactor first article testing and reporting services.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

USA

Set-Aside

SBA

Documents

This scope was carved out of SPE7M2-26-Q-0818.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

GUIDE, PISTON ASSY

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 22

subcontract

Response DeadlineOct 6

Submission deadline

Response Deadline

10/06/2026, 05:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → NUCLEAR REACTOR PROGRAM

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs First Article Testing (FAT) for prime contractors on Nuclear Reactor Program projects. Validates the initial production unit by measuring and verifying dimensions against Reference Drawing 80064 S9074-AR-GIB-010/278 using certified metrology equipment such as CMMs and micrometers calibrated to national standards. Requires a Quality Management System certification. Delivers one formal First Article report to the Post Award Administrator.

Similar Contracts

Same NAICS industry code

Soil, Compaction & Material TestingThis subcontract opportunity with W.A. Rasic Construction Company involves providing technical testing for soil and construction materials on water infrastructure projects for the City of Lomita. The selected provider will be responsible for conducting soil and compaction testing to ensure all materials meet project specifications, as well as delivering detailed testing reports and certifications regarding material quality and compaction. The project is categorized under NAICS code 541380 and is open to various set-aside categories, including Small Business, HUBZone, DBE, MBE, and WBE certified firms. Interested parties must submit their responses by October 19, 2026, to be considered for this technical support role.

W.A. Rasic Construction Company

POSTED

about 11 hours ago

DEADLINE

Geotechnical and Materials Testing Services for Waterline Replacement Project in Hemet, CA

Solicitation # CIP 5661

Albert A. Webb Associates is seeking a qualified small and disadvantaged business firm to serve as a subconsultant for the City of Hemet's Oakland and Santa Fe Waterline Replacement project (CIP 5661). The selected firm will provide geotechnical and materials inspection and testing services over an estimated 210 construction working days. The scope of work includes material and compaction testing for roadway subgrade, aggregate base, trench backfill, pipe bedding, and trench bottom, as well as initial sampling and acceptance testing of proposed materials. A key deliverable is a certification memorandum signed by a professional engineer identifying any non-complying materials. Because the project is funded in whole or in part by a U.S. Environmental Protection Agency (EPA) Community Grant, the subcontractor must comply with federal flow-down provisions, including the Build America, Buy America Act and Disadvantaged Business Enterprise (DBE) requirements under 40 CFR Part 33. Additional mandates include registration with the California Department of Industrial Relations for public works, adherence to California prevailing wage laws, and maintaining commercial general liability insurance of at least $2,000,000 per occurrence. Interested firms must provide a technical proposal, fee proposal, and proof of small or disadvantaged business certifications.

Albert A. Webb Associates

POSTED

about 11 hours ago

DEADLINE

NDE and Quality Inspection ServicesThis subcontract for NDE and Quality Inspection Services, managed by ORNL UT-Battelle LLC for the Department of Energy, focuses on performing non-destructive testing and dimensional inspections for prime contractors on US ITER projects. The primary objective is to verify hardware and welding integrity against technical drawings using Visual, Magnetic, Ultrasonic, and Radiographic testing methods. The selected provider must utilize specialized UT, RT, and MT inspection equipment and ensure all personnel hold the necessary NDE inspector qualifications. Compliance with the project Inspection Plan is mandatory, and the contractor is responsible for delivering all required quality assurance records and seller inspection reports.

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

about 11 hours ago

DEADLINE

Water Testing And Laboratory Services (Citywide)

Solicitation # 2026-Water-Testing Lab

The City of La Palma, through its Public Works agency, is seeking solicitation 2026-Water-Testing Lab for water testing and laboratory services. This contract ensures compliance with State Water Resources Control Board Division of Drinking Water requirements by providing professional sampling and analysis of production wells and distribution systems. Interested parties must submit their responses by October 22, 2026. The project is managed by CIP Manager Azita Fakoorbayat and Public Works Manager Jake Chavira, with performance taking place within the state of California.

POSTED

about 14 hours ago

DEADLINE

Environmental Laboratory AnalysisThis subcontract for Environmental Laboratory Analysis, issued by the Government of Yukon, involves providing analytical testing services for water samples collected at Wolverine Mine projects. The selected provider will analyze surface, ground, and potable water to ensure compliance with Water Quality Objectives and baseline 95th percentiles, delivering certified analytical reports and data. To qualify, the laboratory must hold ISO/IEC 17025 or an equivalent environmental lab accreditation. The solicitation is categorized under NAICS code 541380, with a response deadline of October 21, 2026.

Government of Yukon

POSTED

about 16 hours ago

DEADLINE

Environmental Laboratory AnalysisThis subcontract for Environmental Laboratory Analysis supports prime contractors on projects for the Municipality of Clarington. The selected provider will perform chemical analysis on soil, water, and vapor samples to detect hydrocarbons, VOCs, and metals using ICP and GC-MS equipment. To ensure data integrity, the contractor must maintain strict chain-of-custody protocols and deliver certified laboratory analytical reports. Eligible providers must hold accreditation from CALA or ISO/IEC 17025. The solicitation was posted on September 22, 2026, with a response deadline of October 14, 2026. This opportunity falls under NAICS code 541380 and is managed by the Municipality of Clarington.

Municipality of Clarington

POSTED

about 18 hours ago

DEADLINE

Geotechnical and Seismic TestingThis subcontract for Geotechnical and Seismic Testing supports airport driveway projects for the City of Douglas, Georgia. The selected independent certified testing laboratory will be responsible for performing Modified Proctor compaction tests to verify backfill density using nuclear density gauges and conducting seismic monitoring during blasting activities within 500 feet of structures. The contractor must deliver certified test reports to the prime contractor. This opportunity is categorized under NAICS code 541380, with a response deadline of September 27, 2026.

City of Douglas

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Soil and Rock Laboratory AnalysisThis subcontract for Soil and Rock Laboratory Analysis involves providing specialized testing services for prime contractors on geotechnical projects within the Municipality of Clarington. The scope of work includes performing sieve analysis, Atterberg limits, triaxial shear, consolidation, and unconfined compressive strength testing using triaxial cells and compression machines. The selected provider is responsible for delivering comprehensive laboratory test results and certified data sheets. To be eligible, the contractor must hold ISO/IEC 17025 accreditation and maintain five million dollars in liability insurance. This opportunity falls under NAICS code 541380, with a response deadline set for October 14, 2026.

Municipality of Clarington

POSTED

about 19 hours ago

DEADLINE

26ITB1657563A-JWT Water Quality Monitoring

Solicitation # 26ITB1657563A-JWT

Fulton County, Georgia, is soliciting bids for water quality monitoring and sampling services to evaluate water quality trends and verify the effectiveness of Best Management Practices within the County Watershed Protection Plan. The primary objective is to reduce Fecal Coliform contamination and ensure compliance with EPD water quality standards. The scope of work includes collecting flow-weighted composite and dry weather base flow samples at the FLTLT-02 permanent monitoring location and other in-stream sites. Key deliverables include monitoring for parameters such as Fecal Coliform, E.coli, phosphorus, nitrogen, and various heavy metals, as well as the production of seasonal trend evaluation reports, a Biological Monitoring Implementation Plan, and an optional County-Wide Annual WPP Report. The contract is a competitive sealed bid awarded to the lowest responsive and responsible bidder. The base period of performance is approximately 12 months, with the possibility of extension for up to three additional years. Bidders must submit their responses in PDF format via BidNet Direct by October 27, 2026. Required documentation includes a bid bond, professional license certifications, and various compliance forms, including the Georgia Security and Immigration Contractor Affidavit and a Promise of Non-Discrimination. Payment is processed monthly via U.S. mail approximately 30 days after receipt of a proper invoice, subject to annual appropriations by the County governing body.

Fulton County Purchasing Department

POSTED

about 19 hours ago

DEADLINE

in about 1 month

ONSITE FIT TESTING SERVICE

Solicitation # IFB-128854

The Virginia Department of Behavioral Health and Developmental Services is soliciting bids for on-site N95 respirator fit testing and training services for approximately 500 employees at Western State Hospital in Staunton, Virginia. The selected contractor will provide all necessary personnel, equipment, and materials to conduct quantitative or qualitative fit testing and instruction on proper respirator use, including donning, doffing, and seal checks. Services must be performed over five consecutive weekdays during March or April in accordance with OSHA 29 CFR 1910.134 and other applicable federal and state requirements. The contract consists of an initial one-year term with four optional one-year renewals. The award will be granted to the lowest responsive and responsible bidder on a grand total by lot basis. Bidders must be registered in eVA and submit all mandatory documentation, including bidder data, a pricing schedule, a signed business associates agreement, and state corporation commission documentation, by October 5, 2026, at 10:00 am EST. This solicitation is designated for award priority to DSBSD-certified micro or small businesses. Payment will be processed via check, ACH, or EDI within 30 days of a valid invoice, following the Virginia Prompt Payment Act. All inquiries must be directed via email to JoAnn Estes.

Western State Hospital

POSTED

about 21 hours ago

DEADLINE

Testing and Inspection ServicesThis subcontract for Testing and Inspection Services supports facility projects for the Placentia-Yorba Linda Unified School District in Placentia, California. The selected provider will perform independent testing and inspection of electrical and fire alarm systems for prime contractors to ensure full compliance with California codes and NFPA standards. All work must be executed according to Section 01 40 50/51 using specialized electrical testing and certification equipment. The contractor is responsible for delivering formal certifications and detailed inspection reports to verify system performance. This opportunity was posted on September 22, 2026, with a response deadline of October 22, 2026. The services fall under NAICS code 541380 for industrial design and engineering services.

Placentia-Yorba Linda Unified School District

POSTED

about 22 hours ago

DEADLINE

Production Lot Test (PLT) ServicesThis subcontract for Production Lot Test (PLT) Services, managed by the Department of Defense ASC Commodities Division, involves performing specialized testing and validation on production lots of cable assemblies for prime contractors on DLA Aviation projects. The scope of work requires executing tests to verify electrical continuity, signal integrity, and physical tolerances according to NSN 6150-01-091-6485, utilizing equipment such as multimeters, oscilloscopes, or automated cable testers to deliver certified test reports. The project falls under NAICS code 541380 and is to be performed in New Cumberland, Pennsylvania. Interested parties must respond by September 30, 2026, following the posting date of September 22, 2026.

ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

Manufacture of Piston Assembly GuidesThis subcontract under the Nuclear Reactor Program of the Department of Defense requires the fabrication of 17 Piston Assembly Guides. The manufacturer must strictly adhere to Reference Drawing 80064 S9074-AR-GIB-010/278, Revision A, and ensure all units are marked according to MIL-STD-129 and Unique Item Identification standards for DoD assets. The project is a Total Small Business Set-Aside under NAICS code 332721. Due to the handling of Federal Contract Information, the provider must maintain CMMC compliance and utilize precision machining equipment to deliver the completed, marked, and packaged guides.

Precision Turned Product Manufacturing

POSTED

about 22 hours ago

DEADLINE

First Article Testing (FAT) ServicesThis subcontract for First Article Testing (FAT) Services supports the Department of Defense Nuclear Reactor Program by providing technical testing and validation for aircraft parts. The contractor is responsible for executing FAT protocols using specialized equipment, including Optical Time-Domain Reflectometers, light source power meters, and fiber optic testing rigs, to ensure all components meet technical acceptability standards. The primary deliverable is the First Article Test Report, which must be documented for CDRL submission. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380, with a response deadline of October 6, 2026.

Testing Laboratories and Services

POSTED

about 22 hours ago

DEADLINE

Fiber Optic Assembly ManufacturingThis subcontract, issued by the Department of Defense under the Nuclear Reactor Program, requires the manufacture of 25 fiber optic assemblies with the national stock number 1730-01-465-0305. The contractor is responsible for fabricating and assembling components to strict technical specifications using specialized splicing and termination equipment, while ensuring full traceability of manufacturing sources and adherence to MIL-STD-129 marking standards. The opportunity is designated as a total small business set-aside under NAICS code 335921. Interested parties must submit their responses by October 6, 2026, following the posting date of September 22, 2026.

Fiber Optic Cable Manufacturing

POSTED

about 22 hours ago

DEADLINE

Supply of General Atomic Electronic Components AssemblyThis subcontract with the Department of Defense Nuclear Reactor Program involves the supply of twelve proprietary electronic components assemblies, specifically General Atomic 4XB60 part number 340000D1133254 under NSN 5998016652041. The contractor is responsible for providing these assemblies to prime contractors on DLA supply contracts, with performance taking place in New Cumberland, Pennsylvania. Strict adherence to technical standards is required, including packaging per ASTM D3951 and RP001 and labeling according to MIL-STD-129. Additionally, the provider must maintain cybersecurity compliance through a CMMC Level 2 self-assessment and meet NIST SP 800-171 standards. The opportunity is categorized under NAICS code 423430.

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

Gasket Supply (NSN 7015607310)This subcontract for the Nuclear Reactor Program involves the manufacture or sourcing of 106 gaskets meeting NSN 7015607310 specifications. The contractor is responsible for ensuring all units are marked according to MIL-STD-129 and packaged in compliance with MIL-STD-2073-1E, specifically following QWP:001, Pres Mthd:33, and Clng/Dry:1. The delivery of the 106 units will be handled as FOB Origin, with the place of performance located in Tracy, California. This procurement falls under NAICS code 339999 and is managed by the Department of Defense.

All Other Miscellaneous Manufacturing

POSTED

about 22 hours ago

DEADLINE

Solicitation # SPE7M2-26-T-6968

This contract is for the procurement of one 8-ounce unit of Type A brazing flux, identified by NSN 3439-00-913-4750. The item is classified as a critical application item and must adhere to the technical specifications of O-F-499D. Delivery is required within 20 days, with FOB destination for both inspection and acceptance. The supplier must comply with several strict quality and safety standards, including a non-extendable 12-month shelf life and a prohibition on the intentional addition of mercury. Packaging and marking must follow MIL-STD-129, MIL-STD-2073-1E, and ASTM-D-3951, while also meeting DLA packaging requirements and ICAO technical standards. The acquisition is subject to full and open competition and incorporates various DLA master list technical and quality requirements.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 22 hours ago

DEADLINE

SPL ICE, CONDUCTOR

Solicitation # SPE7M2-26-T-6965

This contract is for the procurement of conductor splices, identified as a critical application commercial item under NSN 5940-01-135-7078. The requirement specifies a quantity of 4.43 HD, with delivery expected within 118 days. The items must adhere to the Qualified Products List or Qualified Manufacturers List and comply with technical standards SAE AS83519. The agreement mandates strict quality and safety protocols, including zero-based sampling plans per MIL-STD-1916 and a general prohibition on the intentional addition of mercury. Inspection and acceptance will occur at the origin, with packaging and marking following MIL-STD-2073-1E and MIL-STD-129. Final delivery is designated for the DLA Distribution New Cumberland facility in Pennsylvania, with a required delivery date of June 18, 2027.

Current-Carrying Wiring Device Manufacturing

POSTED

about 22 hours ago

DEADLINE

ELECTRONIC COMPONENTS

Solicitation # SPE7M2-26-T-5531

Solicitation SPE7M2-26-T-5531 is a request for quotations issued by the DLA Land and Maritime Nuclear Reactor Program for the procurement of 12 electronic components assemblies. The specific requirement is for General Atomic 4XB60 part number 34000D1133254, identified by NSN 5998016652041. The items are to be delivered to the DDSP New Cumberland Facility in Pennsylvania, with a required delivery date of May 22, 2027, and a need ship date of January 5, 2027. Shipping terms are established as FOB Origin, while inspection and acceptance will take place at the destination. The contract mandates strict adherence to quality and security standards, including a Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and compliance with NIST SP 800-171. Packaging must follow ASTM D3951 and RP001 palletization requirements, with all labeling conforming to MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and the Berry Amendment. All quotes must be submitted via the DIBBS portal by the specified deadline.

Bare Printed Circuit Board Manufacturing

POSTED

about 22 hours ago

DEADLINE

SENSOR, CURRENT

Solicitation # SPE7M2-26-T-6966

The Department of Defense, through DLA Land and Maritime, is soliciting quotes for the procurement of 18 current sensors under solicitation number SPE7M226T6966. The approved source for this item is 27192 42-5422, and the goods are to be delivered to DLA Distribution within 161 days after receipt of the order. This procurement falls under NAICS code 334412 and is managed by an office located in Columbus, Ohio. Interested and responsible sources must submit their quotes electronically by the deadline of October 5, 2026. The solicitation is available as an RFQ via the provided electronic link, though no hard copies, specifications, plans, or drawings are available for this request. All inquiries regarding this procurement should be directed to the buyer via the DIBBS portal.

Bare Printed Circuit Board Manufacturing

POSTED

about 22 hours ago

DEADLINE

Solicitation # SPE7M2-26-T-6788

This solicitation, issued by the Department of Defense Nuclear Reactor Program under solicitation number SPE7M2-26-T-6788, is for the procurement of 553 units of Anode Assemblies, identified by NSN 1710-00-573-7197. The contract requires delivery within 144 days after the order is received, with the place of performance located in San Diego, California. The agreement is subject to strict technical and quality requirements as outlined in the DLA Master List, including specific packaging standards and configuration change management. Notably, the contract mandates compliance with CMMC Level 2 certification and strict adherence to export control regulations under ITAR and EAR. Access to technical data is restricted to approved contractors with US/Canada Joint Certification Program certification and completed DOD export-controlled data training.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

CARTRIDGE, TONER

Solicitation # SPE7M2-26-U-0509

This procurement request from DLA Land and Maritime is for the supply of toner cartridges under NSN 3610017214071. The solicitation is structured as a potential Automated Indefinite Delivery Contract with a one-year term or until a total value of 350,000.00 is reached. While the initial line item specifies a quantity of 35 units to be delivered within 97 days after the order, the contract includes a guaranteed minimum quantity of 5 units. Shipments will be distributed to various CONUS and OCONUS DLA Depots. The opportunity is set aside for SBA Certified Women-Owned Small Businesses under NAICS code 325180. Approved sources are identified as 54AJ6 and 78C1XC0. Interested parties must submit electronic quotes by the deadline of October 7, 2026. All inquiries and submissions should be handled through the specified electronic channels, as hard copies of the solicitation and technical drawings are not available.

Other Basic Inorganic Chemical Manufacturing

POSTED

about 22 hours ago

DEADLINE

FILTER, RADIO FREQUENCY

Solicitation # SPE7M2-26-T-6368

Solicitation SPE7M2-26-T-6368, issued by the DLA Land and Maritime Nuclear Reactor Program, is a request for quotations for two radio frequency interference filters, identified by NSN 5915-01-351-7169. The procurement is subject to strict export controls under ITAR and EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DLA export-control training. Delivery is required within 154 days after receipt of order, with a need ship date of February 2, 2027, and a final required delivery date of April 19, 2027. Inspection and acceptance will occur at the destination in Tracy, California. The contract mandates compliance with MIL-STD-129 and MIL-STD-2073-1E for packaging and marking, and requires the use of the Wide Area WorkFlow system for electronic invoicing. Award evaluation may be automated, and a price preference is available for certified HUBZone small businesses. Notably, the government will not evaluate offers utilizing additive manufacturing without prior approval. Offerors must adhere to the Buy American Act and Berry Amendment domestic sourcing requirements and provide disclosure for any non-domestic materials. All quotes must be submitted via the DLA Internet Bid Board System.

Other Electronic Component Manufacturing

POSTED

about 22 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS