Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Magnetic Particle Inspection (MPI) for Aviation Fasteners

Active

Federal

Response Deadline09/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the Department of Defense Aviation Supply Chain involves performing 100 percent magnetic particle inspection on shear bolts for prime contractors. The scope of work requires the use of wet or dry bench equipment to identify surface and near-surface defects across entire manufacturing lots. All services must be performed by technicians certified to NAS 410 standards, with strict adherence to SAE AS9003 or ISO 9001 quality systems. The project is based at Robins Air Force Base and requires the delivery of detailed inspection reports and certifications for each lot. Interested parties must respond by September 30, 2026, under NAICS code 541380.

General Info

DoD subcontract for magnetic particle inspection of shear bolts at Robins Air Force Base.

Agency

Department Of Defense → AVIATION SUPPLY CHAINView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

ROBINS A F B, GA, 31098-1887, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A1-26-T-2903.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BOLT, SHEAR

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 22

subcontract

Response DeadlineSep 30

Submission deadline

Response Deadline

09/30/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → AVIATION SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs 100% magnetic particle inspection (MPI) for prime contractors on DLA Aviation supply contracts. Examines the entire manufacturing lot of shear bolts using wet or dry bench MPI equipment to ensure absence of surface and near-surface defects. Requires NDT technicians certified to NAS 410 standards and compliance with SAE AS9003 or ISO 9001 quality systems. Delivers inspection reports and certifications for the manufacturing lot.

Similar Contracts

Same NAICS industry code

Geotechnical and Materials Testing Services for Waterline Replacement Project in Hemet, CA

Solicitation # CIP 5661

Albert A. Webb Associates is seeking a qualified small and disadvantaged business firm to serve as a subconsultant for the City of Hemet's Oakland and Santa Fe Waterline Replacement project (CIP 5661). The selected firm will provide geotechnical and materials inspection and testing services over an estimated 210 construction working days. The scope of work includes material and compaction testing for roadway subgrade, aggregate base, trench backfill, pipe bedding, and trench bottom, as well as initial sampling and acceptance testing of proposed materials. A key deliverable is a certification memorandum signed by a professional engineer identifying any non-complying materials. Because the project is funded in whole or in part by a U.S. Environmental Protection Agency (EPA) Community Grant, the subcontractor must comply with federal flow-down provisions, including the Build America, Buy America Act and Disadvantaged Business Enterprise (DBE) requirements under 40 CFR Part 33. Additional mandates include registration with the California Department of Industrial Relations for public works, adherence to California prevailing wage laws, and maintaining commercial general liability insurance of at least $2,000,000 per occurrence. Interested firms must provide a technical proposal, fee proposal, and proof of small or disadvantaged business certifications.

Albert A. Webb Associates

POSTED

about 3 hours ago

DEADLINE

RFB-IS-27200199 - 1091809 - ANNUAL FUEL TANK INSPECTIONS - Closing: 10/6/2026 12:00 PM

Solicitation # 232159

Los Angeles County is seeking proposals for contract 1091809 regarding annual fuel tank inspections. This solicitation, identified as RFB-IS-27200199, is managed by the state of California and will be performed within Los Angeles. Interested parties must submit their responses by the deadline of October 6, 2026, at 7:00 PM. The primary point of contact for this opportunity is Bryan Phan, who can be reached via email or phone for further inquiries.

Los Angeles County

POSTED

about 11 hours ago

DEADLINE

Soil, Compaction & Material TestingThis subcontract opportunity with W.A. Rasic Construction Company involves providing technical testing for soil and construction materials on water infrastructure projects for the City of Lomita. The selected provider will be responsible for conducting soil and compaction testing to ensure all materials meet project specifications, as well as delivering detailed testing reports and certifications regarding material quality and compaction. The project is categorized under NAICS code 541380 and is open to various set-aside categories, including Small Business, HUBZone, DBE, MBE, and WBE certified firms. Interested parties must submit their responses by October 19, 2026, to be considered for this technical support role.

W.A. Rasic Construction Company

POSTED

about 15 hours ago

DEADLINE

NDE and Quality Inspection ServicesThis subcontract for NDE and Quality Inspection Services, managed by ORNL UT-Battelle LLC for the Department of Energy, focuses on performing non-destructive testing and dimensional inspections for prime contractors on US ITER projects. The primary objective is to verify hardware and welding integrity against technical drawings using Visual, Magnetic, Ultrasonic, and Radiographic testing methods. The selected provider must utilize specialized UT, RT, and MT inspection equipment and ensure all personnel hold the necessary NDE inspector qualifications. Compliance with the project Inspection Plan is mandatory, and the contractor is responsible for delivering all required quality assurance records and seller inspection reports.

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

about 15 hours ago

DEADLINE

BJA FY26 DNA Capacity Enhancement for Backlog Reduction (CEBR)—Competitive Grants Program

Solicitation # O-BJA-2026-172680

The BJA FY 2026 DNA Capacity Enhancement for Backlog Reduction (CEBR) Competitive Grants Program, solicitation number O-BJA-2026-172680, is a federal funding opportunity provided by the Bureau of Justice Assistance under the Department of Justice. The program aims to increase the capacity of state and local government crime laboratories to process DNA samples for entry into the Combined DNA Index System (CODIS). Key priorities include improving the efficiency of publicly funded forensic laboratories and implementing Rapid DNA technology within booking stations to strengthen evidence-based criminal justice responses. Eligible agencies may apply for this competitive funding, and they are also permitted to apply for the separate Formula Grants Program which will be posted at a later date. The solicitation was posted on September 23, 2026, with a response deadline of November 3, 2026. Interested parties can coordinate through the Bureau of Justice Assistance via the provided contact email and phone number.

Bureau Of Justice Assistance

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Routine Microbiological and Physical Water AnalysisThis subcontract for the California Public Works agency involves providing routine physical and microbiological water analysis for prime contractors on City water testing projects. The scope of work includes performing physical property analysis and 10 Tube MPN testing for total and fecal coliform using Method SM 9221. To qualify, the provider must possess standard microbiological laboratory equipment and incubation facilities, and they must hold certification from the SWRCB Environmental Laboratory Accreditation Program. The project is categorized under NAICS code 541380 and requires the delivery of certified test results. Interested parties must submit their responses by the deadline of October 22, 2026, following the posting date of September 23, 2026.

POSTED

about 18 hours ago

DEADLINE

Specialized Chemical Analysis for Drinking Water (PFAS & Taste/Odor)This subcontract for the California Public Works agency involves providing high-complexity chemical analysis for drinking water testing projects. The selected provider will perform specialized testing for perfluorinated chemicals (PFAS), Geosmin, and Methylisoborneol (MIB) utilizing high-resolution mass spectrometry to deliver detailed analytical reports and test results to prime contractors. To be eligible, the contractor must hold certification from the California State Water Resources Control Board Environmental Laboratory Accreditation Program. The opportunity is categorized under NAICS code 541380, with a response deadline set for October 22, 2026.

POSTED

about 18 hours ago

DEADLINE

Water Testing And Laboratory Services (Citywide)

Solicitation # 2026-Water-Testing Lab

The City of La Palma is soliciting proposals for citywide water testing and laboratory services to ensure compliance with State Water Resources Control Board Division of Drinking Water requirements. The contract covers the collection and analysis of water samples from approximately 150,000 lineal feet of water main lines, two well sites, two reservoirs, and two booster pump stations. Testing parameters include coliform bacteria, chlorine, trace metals, organic and inorganic chemicals, disinfection by-products, color, and turbidity. The selected contractor must be certified by the California State Water Resources Control Board Environmental Laboratory Accreditation Program and is responsible for transporting samples from La Palma to their laboratory. The contract term runs from January 1, 2027, through January 1, 2030, with the possibility of two one-year extensions. Award will be granted to the lowest responsive and responsible bidder based on experience, capacity, and adaptability. Required deliverables include analytical results and facility inspection reports, with monthly invoicing submitted in arrears. The contractor must provide a faithful performance bond equal to three months of the annual contract amount and maintain comprehensive insurance coverage, including three million dollars in general liability and one million dollars in professional and automobile liability. Proposals are due via the OpenGov portal by October 21, 2026, with the award scheduled for November 10, 2026.

POSTED

about 18 hours ago

DEADLINE

Environmental Laboratory AnalysisThis subcontract for Environmental Laboratory Analysis, issued by the Government of Yukon, involves providing analytical testing services for water samples collected at Wolverine Mine projects. The selected provider will analyze surface, ground, and potable water to ensure compliance with Water Quality Objectives and baseline 95th percentiles, delivering certified analytical reports and data. To qualify, the laboratory must hold ISO/IEC 17025 or an equivalent environmental lab accreditation. The solicitation is categorized under NAICS code 541380, with a response deadline of October 21, 2026.

Government of Yukon

POSTED

about 20 hours ago

DEADLINE

Environmental Laboratory AnalysisThis subcontract for Environmental Laboratory Analysis supports prime contractors on projects for the Municipality of Clarington. The selected provider will perform chemical analysis on soil, water, and vapor samples to detect hydrocarbons, VOCs, and metals using ICP and GC-MS equipment. To ensure data integrity, the contractor must maintain strict chain-of-custody protocols and deliver certified laboratory analytical reports. Eligible providers must hold accreditation from CALA or ISO/IEC 17025. The solicitation was posted on September 22, 2026, with a response deadline of October 14, 2026. This opportunity falls under NAICS code 541380 and is managed by the Municipality of Clarington.

Municipality of Clarington

POSTED

about 22 hours ago

DEADLINE

Geotechnical and Seismic TestingThis subcontract for Geotechnical and Seismic Testing supports airport driveway projects for the City of Douglas, Georgia. The selected independent certified testing laboratory will be responsible for performing Modified Proctor compaction tests to verify backfill density using nuclear density gauges and conducting seismic monitoring during blasting activities within 500 feet of structures. The contractor must deliver certified test reports to the prime contractor. This opportunity is categorized under NAICS code 541380, with a response deadline of September 27, 2026.

City of Douglas

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Materials Testing LaboratoryThis subcontract with the Texas Department of Transportation involves providing independent testing and inspection of construction materials for prime contractors on facility projects located in Lubbock County, Texas. The scope of work includes field inspection and testing of water, sludge, and crushed limestone base materials, as well as the delivery of material test reports. The contractor is responsible for furnishing concrete mix designs in accordance with ACI 301, Section 3.9, and performing sampling following ASTM C31 standards. This opportunity falls under NAICS code 541380, with a response deadline of November 4, 2026.

Texas Department Of Transportation

POSTED

about 22 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN

Same awarding agency

BRACKET, SCAVENGE

Solicitation # SPE4A1-26-T-2933

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 2 hours ago

DEADLINE

Supplier of Indicator Housings (NSN 6680-01-127-8883)This subcontract with the Department of Defense Aviation Supply Chain involves the procurement of two indicator housings, specifically Parker Hannifin Corporation part number 2771590-102 matching NSN 6680-01-127-8883. The supplier is responsible for delivering these components to prime contractors fulfilling DLA supply contracts, with the place of performance located in Tracy, California. The contract mandates strict adherence to quality and regulatory standards, including ISO 9001:2015 compliance, the Buy American Act, and the Berry Amendment. Technical requirements specify quality sampling according to MIL-STD-1916 or ASQ H1331, packaging per ASTM D3951, and labeling per MIL-STD-129. The opportunity was posted on September 22, 2026, with a response deadline of September 30, 2026, under NAICS code 423840.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Screw Thread Insert Supplier

Hardware Manufacturing

POSTED

DEADLINE

Supply of Air Conditioning Filter Elements (NSN 4130-01-702-9777)This subcontract with the Department of Defense Aviation Supply Chain involves the procurement of four specialized air conditioning filter elements, specifically Lockheed Martin part number 63A170161P2, under NSN 4130-01-702-9777. The supplier is responsible for delivering the units FOB Origin to DLA Distribution New Cumberland. The contract mandates strict adherence to technical standards, requiring packaging according to RP001 and MIL-STD-2073-1E, and marking in accordance with MIL-STD-129. Additionally, the provider must ensure that no mercury compounds are used during the preservation process as per IP056.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Supply of Shear Bolts (NSN 5306011239781)This subcontract with the Department of Defense Aviation Supply Chain involves the manufacture or sourcing of seven specialized shear bolts under NSN 5306011239781. The supplier must adhere to Critical Application Item standards and comply with the DLA Master List of Technical and Quality Requirements. Performance requirements include physical identification and bare item marking according to RQ017, as well as palletization and packaging in accordance with RP001. The contract is categorized under NAICS code 332722 and is to be performed in New Cumberland. Interested parties must respond by September 30, 2026, to provide these marked and packaged components for prime contractors delivering DLA Aviation supply contracts.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Supply of Machine Bolts (NSN 5306-01-094-5983)This subcontract involves the supply of 330 mercury-free machine bolts, identified by NSN 5306-01-094-5983, for prime contractors supporting Department of Defense Aviation Supply Chain projects. The contractor is responsible for manufacturing or sourcing the bolts in accordance with RQ001 and RT001 quality standards, utilizing sampling methods per MIL-STD-1916 or ASQ H1331. To qualify, the provider must hold SAE AS9003 or ISO 9001 certification and ensure all packaging complies with MIL-STD-129 and RP001. Performance for this contract is centered in Tracy, California, with a response deadline of September 30, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Supply of Pressure Indicators (Critical Application Item)This subcontract involves the supply of six pressure indicators for prime contractors supporting Department of Defense aviation supply chain contracts. The hardware must match PALL AEROPOWER CORPORATION part number 240052-088 and national stock number 6620011325190. All deliverables are classified as Critical Application Items and must adhere to strict quality standards, DLA packaging and labeling requirements, and FAR 52.223-23 regulations. The performance location for this contract is Corpus Christi, Texas, with a final delivery deadline of June 8, 2027. The procurement falls under NAICS code 423990 and was posted on September 22, 2026, with a response deadline of September 30, 2026.

Other Miscellaneous Durable Goods Merchant Wholesalers

POSTED

DEADLINE

Precision Machining and Supply of Threaded End RodsThis subcontract involves the precision machining and supply of threaded end rods for prime contractors supporting Department of Defense Aviation supply chain projects. The contractor is responsible for machining rods to Basic Drawing NR 19207 12471153, Revision A, specifically performing precision threading for part number 12471153-2 using CNC lathes and milling machines. Completed components must be delivered to the designated DoDAAC location in Tracy, California. Strict regulatory compliance is required for this engagement, including ITAR/EAR standards, DFARS 252.204-7012, and CMMC Level 2 certification. The opportunity falls under NAICS code 332722 and was posted on September 22, 2026, with a response deadline of September 30, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Supplier of Stud, Snap Fasteners (NSN 5325010597585)This subcontract involves the manufacture and supply of 1,665 specialized snap fastener studs, identified by NSN 5325010597585, for prime contractors supporting the Department of Defense Aviation Supply Chain. The supplier is responsible for ensuring all hardware is marked in strict accordance with MIL-STD-130N and must coordinate all logistics under the First Destination Transportation program requirements. The project falls under NAICS code 332510 and is scheduled for performance in New Cumberland, Pennsylvania. Interested parties must respond by September 30, 2026, to meet the procurement timeline established by the agency.

Hardware Manufacturing

POSTED

DEADLINE

Supply of Retaining Rings (NSN 5325-01-687-2385)This subcontract involves the manufacture or sourcing of 174 retaining rings under NSN 5325-01-687-2385 for prime contractors supporting the Department of Defense Aviation Supply Chain. The supplier must utilize precision metal stamping or machining equipment to ensure all units adhere to RA001 technical and quality requirements. All items must be packaged and labeled in strict accordance with MIL-STD-2073-1E. The performance of this contract will take place in New Cumberland, Pennsylvania, with a response deadline of September 30, 2026.

Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

DEADLINE

Manufacture of High-Strength Shear Bolts (NSN 5306001450784)This subcontract involves the manufacture of 502 high-strength shear bolts under NSN 5306001450784 for the Department of Defense Aviation Supply Chain. The producer must utilize precision machining for aerospace alloys and adhere to strict technical data requirements, including stress durability testing per NASM1312-5 and marking standards per MIL-STD-130N. Performance will take place at Robins Air Force Base. To qualify, the manufacturer must maintain an inspection system compliant with SAE AS9003 or ISO 9001 and ensure full adherence to the Buy American Act and the Berry Amendment. The project falls under NAICS code 339993, with a response deadline of September 30, 2026.

Fastener, Button, Needle, and Pin Manufacturing

POSTED

DEADLINE

Supply of Aircraft Hinges (NSN 1560017062777)This subcontract with the Department of Defense Aviation Supply Chain involves the manufacture or sourcing of seven specialized aircraft hinges that must adhere to technical specifications for NSN 1560017062777. The contractor is required to use aircraft-grade materials and strictly follow government standards for packaging under RP001, physical identification per RQ017, and the removal of government identification as specified in RQ011. The project is categorized under NAICS code 336413 and will be performed in Tracy, California. All deliverables must be packaged and marked according to DLA requirements to support prime contractors delivering these components to the aviation supply chain.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS