Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on July 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

First Article Testing (FAT) Services

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380
New
DIBBS
First Article Test (FAT) Laboratory ServicesThis subcontract for First Article Test Laboratory Services supports the DLA Weapons Support Nuclear Reactor Program. The selected provider will perform First Article Testing on a single unit of electrical insulation to ensure full compliance with MIL-I-24768/1(1) standards. This process involves utilizing specialized thermal resistance and dielectric testing equipment to validate the component, culminating in the delivery of one validated test unit and a certified First Article Test report. Eligible contractors must hold ISO 9001:2015 or ISO/IEC 17025 certification to qualify for the work. The performance of these services is located at Hill AFB. Interested parties should note the response deadline of November 9, 2026, for this Department of Defense requirement categorized under NAICS code 541380.
DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

1 minute ago

DEADLINE

in 12 days
NAICS: 541380
New
DIBBS
Material Testing and Certification LaboratoryThis subcontract for the DLA Weapons Support Land Supply Chain involves providing Material Testing and Certification Laboratory services to perform Production Lot Testing for prime contractors. The primary objective is to validate the quality conformance of O-rings by reviewing material certifications, process operation sheets, and inspection method sheets. Specific technical requirements include verifying asbestos-free composition and ensuring surface imperfections adhere to ISO 3601-3 standards, culminating in the delivery of a comprehensive Test Report. The project is based in Keyport, Washington, and falls under NAICS code 541380. Due to the nature of the technical data handled during the certification process, the contractor must maintain CMMC Level 2 compliance. Interested parties should note the response deadline of November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

1 minute ago

DEADLINE

in 12 days
NAICS: 541380
New
DIBBS
First Article Testing (FAT) ServicesThis subcontract for First Article Testing services is issued by the Department of Defense through the DDSP New Cumberland Facility. The selected contractor will perform quality conformance inspection and testing for prime contractors delivering DLA supply contracts, specifically focusing on one prototype unit. Using laboratory equipment, the contractor must verify material specifications, durability, and pressure in strict accordance with MIL-H-24580. The scope of work requires the delivery of a comprehensive test report and one validated First Article unit, with all test results provided to the Engineering Support Activity. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380. Performance will take place in New Cumberland, Pennsylvania, with responses due by November 9, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 minute ago

DEADLINE

in 12 days
NAICS: 541380
New
DIBBS
Electrical Testing and Certification LaboratoryThis subcontract opportunity is for an Electrical Testing and Certification Laboratory to provide independent verification and testing of cable assemblies for prime contractors supporting DLA Weapons Support ASC projects. The scope of work involves conducting Product Verification Testing, which includes electrical continuity, voltage withstand, and physical dimension checks. All sampling and inspections must be performed using calibrated measurement tools in accordance with MIL-STD-1916 or ASQ H1331 standards, culminating in the delivery of formal test reports and certifications of compliance. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, this requirement is designated as a Total Small Business Set-Aside under NAICS code 541380. The solicitation was posted on October 28, 2026, with a response deadline of November 12, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

1 minute ago

DEADLINE

in 15 days
NAICS: 541380
New
DIBBS
Production Lot Testing and Quality ReportingThis subcontract for Production Lot Testing and Quality Reporting supports the DLA Weapons Support Fluid Handling Division. The selected provider will perform specialized production lot testing and inspections for prime contractors, utilizing pressure testing and leak detection systems. All work must adhere to zero-based sampling plans, specifically MIL-STD-1916, and culminate in the delivery of certified test results and detailed Production Lot Test reports. The project is based in San Diego, California, and falls under NAICS code 541380. Due to the nature of the sensitive data involved, the contractor is required to maintain CMMC Level 2 certification. Interested parties must submit their responses by November 9, 2026.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

1 minute ago

DEADLINE

in 12 days
NAICS: 541380
New
DIBBS
HazMat Identification and SDS DocumentationThis subcontract opportunity with the Department of Defense at the DDSP New Cumberland Facility involves providing hazardous material identification and documentation services for prime contractors on DLA Troop Support projects. The selected provider will be responsible for identifying hazardous materials in accordance with Federal Standard No. 313 and preparing Safety Data Sheets that comply with 29 CFR 1910.1200(g). Additionally, the contractor must provide hazard warning labels as required by DFARS 252.223-7001 and deliver all completed SDS and HazMat identification lists. The project falls under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 minute ago

DEADLINE

in 12 days
NAICS: 541380
New
DIBBS
Production Lot Test (PLT) and Quality CertificationThis subcontract for the Department of Defense, specifically DLA DIST San Joaquin, involves providing specialized testing and quality assurance validation for prime contractors on DLA supply contracts. The scope of work focuses on executing Production Lot Test requirements in accordance with MIL-STD-1916 or ASQ H1331, Table 1, which includes assigning verification levels for critical, major, and minor attributes. The selected provider must possess JCP Certification to access technical data and maintain the necessary laboratory equipment for gas filter validation. Key deliverables for this engagement include the submission of PLT reports, material certifications, and detailed inspection sheets. The performance of these services will take place in Tracy, California. Interested parties should note the response deadline of November 9, 2026, for this opportunity categorized under NAICS code 541380.
DLA DIST SAN JOAQUIN

POSTED

1 minute ago

DEADLINE

in 12 days
NAICS: 541380
New
DIBBS
First Article Testing (FAT) and Quality ValidationThis subcontract involves performing First Article Testing and Quality Validation for the DLA Weapons Support Nuclear Reactor Program under the Department of Defense. The primary objective is to conduct validation on a single prototype unit to certify that manufacturing processes align with MIL-DTL specifications. The selected contractor will be responsible for coordinating with Quality Assurance Representatives and delivering both a validated test unit and a formal FAT Certification Report. The project is categorized under NAICS code 541380 and will be performed in Bremerton, Washington. Interested parties must respond by November 9, 2026, regarding the solicitation posted on October 28, 2026.
DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

1 minute ago

DEADLINE

in 12 days
NAICS: 541380
New
DIBBS
First Article Testing (FAT) Services for Electrical WireThis subcontract involves providing First Article Testing services for electrical wire to support the DLA Weapons Support Maritime Supply Chain. The selected provider will be responsible for verifying that first production units meet MIL-DTL-16878/3C(1) standards using military-grade electrical testing laboratory equipment. Key deliverables include the submission of FAT certifications, detailed test reports, and verified first article samples, all while coordinating closely with Quality Assurance Representatives for final inspection. The project is managed under NAICS code 541380 and will be performed at Fort Stewart, Georgia. Interested parties must note the response deadline of November 9, 2026, for this Department of Defense requirement.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

1 minute ago

DEADLINE

in 12 days
NAICS: 541380
New
DIBBS
Testing and Certification Services (MIL-STD-831)
DLA DIST SAN JOAQUIN

POSTED

1 minute ago

DEADLINE

in 12 days
NAICS: 541380
New
DIBBS
First Article Test (FAT) ExecutionThis subcontract involves the execution of First Article Testing for prime contractors supporting the Department of Defense, specifically under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The scope of work focuses on the first production unit of NSN 5365-01-622-5565 to ensure strict adherence to performance specifications, material properties, and dimensional accuracy. Testing will be conducted at Hill AFB using precision measurement equipment, including micrometers, calipers, and CMM. The successful contractor is required to provide a formal First Article Test Report and a Certification of Compliance upon completion. This effort falls under NAICS code 541380, with a response deadline of November 5, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 minute ago

DEADLINE

in 8 days
NAICS: 541380
New
DIBBS
Contractor First Article Test (CFAT) ServicesThe Contractor First Article Test (CFAT) Services subcontract, issued by the DLA Weapons Support Land Supply Chain for the Department of Defense, involves the testing and validation of prototype 3 inch Schedule 40 butt weld globe valves. The selected contractor is responsible for submitting one unit for testing within 120 days and coordinating a subsequent 60 day government review to ensure all technical specifications and performance standards are met. The project requires strict adherence to ITAR and EAR compliance regarding the handling of testing data. Final deliverables include one successfully tested unit and a comprehensive certification report. Performance for this contract will take place in Tracy, California, under NAICS code 541380.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

1 minute ago

DEADLINE

in 9 days

AI Contract Overview

Show more

This subcontract for First Article Testing (FAT) Services, issued by the Department of Defense under agency W6QK Acc- Dta, requires the independent testing and validation of the first production unit. The primary objective is to ensure full compliance with established military specifications, culminating in the submission of a formal FAT report to the government. The work is designated under NAICS code 541380 and will be performed in Texarkana, Texas. Interested parties must adhere to the timeline established by the posting date of July 15, 2026, with a final response deadline of July 29, 2026.

General Info

DoD subcontract for First Article Testing services in Texarkana, Texas, ending July 2026.

Agency

Department Of Defense → W6QK Acc- Dta

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Texarkana, TX, 75507, USA

Set-Aside

NONE

Documents

This scope was carved out of W912CH26QA039.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CONVERGE SOFTWARE LICENSE RENEWAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc- Dta
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → W6QK Acc- Dta
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Independent testing and validation of first production unit to ensure compliance with military specifications and submission of FAT report to government.

More opportunities from Department Of Defense → W6QK Acc- Dta

Same awarding agency

NAICS: 334419
New
Federal
Solicitation for Cable Assembly, Special / NSN: 5995-01-659-9699
Solicitation # W912CH-27-Q-A013
Other Electronic Component Manufacturing

POSTED

about 5 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332216
New
Federal
Solicitation: SMALL ARMS TOOL KIT (NSN: 5180-01-670-9469) - AMENDED
Solicitation # W912CH-26-B-A016
Solicitation W912CH-26-B-A016 is an Invitation for Bid (IFB) for a single five-year indefinite delivery indefinite quantity (IDIQ) firm-fixed-price contract to provide Small Arms Tool Kits (NSN: 5180-01-670-9469, Part Number: 0631A0000). This procurement is a total small business set-aside under NAICS 332216. The contract establishes pricing for a minimum guaranteed quantity of 120 kits and a maximum estimated quantity of 6,404 kits over the five-year period. Award will be granted to the responsible bidder offering the lowest evaluated price, with evaluation based on unit prices for CLINs 0010 through 0015. Bidders must submit their proposals electronically via email by November 20, 2026. Required documentation includes a completed Standard Form 1449, unit pricing, and a signed Technical Data Package (TDP) cover sheet. The successful contractor must maintain a higher-level quality management system, specifically ISO 9001:2015 or an equivalent standard. Deliveries are FOB Destination, with primary distribution to the DDSP New Cumberland Facility, Def Dist Depot Red River, and Def Dist Depot San Joaquin. Invoicing and payment will be processed through the Wide Area WorkFlow (WAWF) system.
Saw Blade and Handtool Manufacturing

POSTED

1 day ago

DEADLINE

in 23 days
View Details
NAICS: 541330
New
Federal
Technical Data & Logistics SupportThis subcontract, titled Technical Data and Logistics Support, is issued by the Department of Defense under agency W6QK Acc- Dta. The project focuses on the development and delivery of technical manuals and diagnostic data for prime contractors working on U.S. Army ISV projects. Key responsibilities include the creation of interface-control information, parts lists, and logistics data utilizing CAD/PLM systems to facilitate government maintenance and repair operations. The scope of work involves defining data rights and delivery schedules to ensure the timely provision of technical data packages, software diagnostic tools, and logistics manuals. Classified under NAICS code 541330, the opportunity was posted on October 26, 2026, with a response deadline set for November 25, 2026.
Engineering Services

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 332312
New
Federal
Roll Over Protection System (ROPS) FabricationThis subcontract involves the fabrication and supply of safety cages and roll-over protection structures for prime contractors working on U.S. Army ISV projects. The scope of work requires the use of specialized welding equipment to assemble high-strength tubular steel or alloy frames that strictly adhere to Army safety regulations and crashworthiness standards. Deliverables include both standalone and installed Roll Over Protection Systems. Managed under the Department of Defense through agency W6QK Acc- Dta, the project falls under NAICS code 332312. The solicitation was posted on October 26, 2026, with a response deadline set for November 25, 2026.
Fabricated Structural Metal Manufacturing

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 336390
New
Federal
Chassis & Drivetrain SupplyThe Chassis and Drivetrain Supply subcontract, issued by the Department of Defense under agency W6QK Acc- Dta, focuses on providing critical structural and mechanical mobility components for U.S. Army ISV projects. The scope of work involves the manufacture and delivery of heavy-duty axles, off-road suspension systems, and transfer cases to prime contractors. In addition to hardware delivery, the provider is responsible for supplying reliability and validation test data and identifying technical data rights to support long-term government sustainment. Classified under NAICS code 336390, this opportunity was posted on October 26, 2026, with a response deadline of November 25, 2026. The contract ensures the delivery of essential axle assemblies and suspension kits necessary for the operational success of Army vehicle initiatives.
Other Motor Vehicle Parts Manufacturing

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 336311
New
Federal
Powertrain Supply (Engine & Transmission)This subcontract, managed by the Department of Defense under agency W6QK Acc- Dta, involves the supply and integration of primary propulsion systems for U.S. Army Infantry Squad Vehicle projects. The selected provider will be responsible for delivering high-performance automotive engines and transmissions that adhere to strict military specifications, with production scales ranging from 100 to over 1,500 units. Beyond the delivery of completed engine and transmission assemblies, the contractor must provide essential technical data, interface-control information, and detailed parts documentation to ensure long-term sustainment. The opportunity is categorized under NAICS code 336311, with a response deadline set for November 25, 2026.
Carburetor, Piston, Piston Ring, and Valve Manufacturing

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 332994
New
Federal
60 MM Mortar Mount
Solicitation # W912CH-27-R-A026
The United States Army Contracting Command Detroit Arsenal is soliciting a two-year, Firm-Fixed Price requirement contract for the procurement of 60 MM Mortar Mounts, identified by NSN 1010-01-561-9234 and part number 13017350. This procurement is a Small Business Set-Aside under NAICS code 332994. The scope of work includes the production of 118 units for the first year and an option for an additional 118 units in the second year. Key deliverables include the hardware, an Acceptance Inspection Equipment Report, and a First Article Test Report. The delivery schedule is the primary evaluation factor and is considered significantly more important than price, with higher ratings awarded to proposals that can deliver 30 or more days sooner than the solicited schedule. Access to the associated Technical Data Package is restricted to U.S. Government agencies and contractors with a Distribution Code D and requires certification under the United States/Canada Joint Certification Program. Contractors must comply with strict Controlled Unclassified Information guidelines, including mandatory DoD training and the signing of non-disclosure agreements. Packaging and marking must adhere to MIL-STD-2073-1 and MIL-STD-129, with inspection and acceptance of supplies occurring at the point of origin. Invoicing and payment will be processed electronically through the Wide Area Workflow system. Proposals must be submitted via email to the designated Contract Specialist by the specified deadline.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

2 days ago

DEADLINE

in 15 days
View Details
NAICS: 336992
New
Federal
RECHARGE KIT, VALVE 4210-01-483-9758
Solicitation # W912CH27BA014_SourcesSought
The Army Contracting Command Detroit Arsenal is conducting market research through a Sources Sought Notice, solicitation number W912CH27BA014, to identify qualified vendors for the manufacture of Valve Recharge Kits, NSN 4210-01-483-9758, part number 579K4036. These kits are essential for servicing and resetting fire suppression systems within the M1 Abrams Family of Vehicles. This effort is for government planning purposes only and is not a formal solicitation for proposals. The government is seeking information from both small and large businesses under NAICS code 336992 to determine interest, capabilities, and production lead times. Interested respondents must submit a completed market research survey to Contract Specialist Angelo Wilson by November 5, 2026. A critical requirement for accessing the associated Technical Data Package, which is designated as distribution code D, is having a current DD 2345 Military Critical Technical Data Agreement on file with the Defense Logistics Information Service and active registration in the Joint Certification Program. Small businesses must also certify compliance with the nonmanufacturer rule. Responses should include details on quality management systems and production capabilities, with any proprietary information clearly marked as confidential.
Military Armored Vehicle, Tank, and Tank Component Manufacturing

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 541715
New
Federal
Sources Sought: Domestically Produced Hand and Measuring Tools (ACC-DTA CSO Amend 40)
Solicitation # W912CH26S0001
The Army Contracting Command – Detroit Arsenal (ACC-DTA) Commercial Solutions Opening (CSO), solicitation W912CH-26-S-0001, serves as a rapid-acquisition gateway to transition cutting-edge commercial technologies into active defense programs. This vehicle supports a diverse customer base, including the Intelligence and Security Command (INSCOM) and six Portfolio Acquisition Executives, focusing on the development, integration, and sustainment of ground vehicle systems to enhance Army modernization and readiness. The CSO utilizes a streamlined, merit-based, multi-phased evaluation process consisting of solution briefs, presentations, and commercial solution proposals. Awards may be issued through 2028 via FAR Part 12 commercial procedures or non-FAR agreements, such as transaction agreements under 10 U.S.C. 4022 and Cooperative Agreements under 31 U.S.C. 6305. The solicitation encompasses various Areas of Interest (AoI) targeting critical capabilities, including the FALCONS prototype for long-range reconnaissance, TIGER Readiness for the Abrams Main Battle Tank engine supply chain, Counter-Unmanned Aircraft Systems (C-UAS) detection, and the Light Tactical Trailer Heavy Chassis (LTT-HC). Funding ceilings for specific prototypes, such as FALCONS, range from 24 million to 30 million dollars depending on the use of government-provided kits. Key requirements include strict adherence to the Buy American Act and Specialty Metals clauses, with a prohibition on reliance on adversarial foreign nations for critical minerals. Technical evaluations focus on mission viability, affordability, and schedule realism, while administrative requirements include SAM registration, a Unique Entity ID, and compliance with NIST SP 800-171 for handling controlled unclassified information.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 336110
New
Federal
Infantry Squad Vehicle Follow-On Market Questionnaire
Solicitation # W912CH-27-RFI-ISV-0001
The United States Army, through the Product Director, Ground Mobility Vehicles, is conducting a market survey via Request for Information W912CH-27-RFI-ISV-0001 to identify capable industry partners for the continued development, production, and sustainment of the Infantry Squad Vehicle family. The initiative focuses on two primary platforms: the ISV-9, designed for a nine-soldier squad, and the ISV-Utility, designed for a five-soldier squad with a cargo utility bed. The government intends to procure a total potential quantity of approximately 20,787 vehicles, with a target contract award in July 2028 and initial deliveries anticipated to begin in the fourth quarter of Fiscal Year 2029. This RFI is used to assess the industrial base's capacity and determine the optimal acquisition strategy. Key technical requirements include compliance with Federal Motor Vehicle Safety Standards for roll-over protection, adherence to MIL-STD-814 and MIL-STD-209K for tie-down provisions, and transportability dimensions defined by MIL-STD-1366 and MIL-HDBK-1791. The government requires unlimited rights to all form, fit, and function data, as well as all training and maintenance materials. Interested respondents must be registered in the System for Award Management and provide detailed information regarding their socioeconomic status, security capabilities for handling Controlled Unclassified Information, and experience with Automotive Industry Action Group quality tools. Responses are due by November 25, 2026.
Automobile and Light Duty Motor Vehicle Manufacturing

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 333995
New
Federal
Manufacture and Supply of Valve Recharge Kits (NSN 4210-01-483-9758)This subcontract involves the manufacture and supply of Valve Recharge Kits, specifically NSN 4210-01-483-9758 and Part No. 57K4036, for prime contractors working on Army ACC-DTA projects. The selected provider must utilize precision manufacturing equipment to produce the kits in strict accordance with the Technical Data Package. To ensure compliance and quality, the contractor is required to maintain a documented Quality Management System and hold a current DD 2345 certification for necessary data access. The opportunity is designated as a total Small Business Set Aside under NAICS code 333995 and is managed by the Department of Defense. Interested parties must submit their responses by November 5, 2026. The primary objective of the agreement is the successful delivery of completed Recharge Kit Valves that meet all specified technical requirements.
Fluid Power Cylinder and Actuator Manufacturing

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 339115
New
Federal
Invitation for Bids - Vision Correction Assembly
Solicitation # W912CH26BA014
The Army Contracting Command - Detroit Arsenal is soliciting bids for a five-year, Firm-Fixed-Price, Indefinite Delivery/Indefinite Quantity (IDIQ) contract for the manufacture and delivery of the Vision Correction Assembly, identified by NSN 4240-01-631-8044 and Part Number 5-1-4208. This non-commercial requirement involves production based on a Government-owned Technical Data Package (TDP) with Distribution Statement D export controls, requiring offerors to have a valid DD Form 2345 certification. The contract includes a guaranteed five-year minimum quantity of 30,690 units, with a maximum estimated quantity of 1,216,196 units. Key performance requirements include First Article Testing of 200 units, Production Lot Testing, and adherence to ISO 9001:2015 quality standards. The government intends to award a single contract to the responsible bidder offering the lowest total price, evaluated across five ordering years and a First Article Test Report. Bids must be submitted electronically by November 13, 2026, with a virtual bid opening scheduled for November 18, 2026. Deliveries are designated as FOB Destination to the Blue Grass Army Depot in Kentucky. Contractors are required to utilize the Wide Area WorkFlow system for invoicing and must comply with strict packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1. Access to the TDP may further require a Use and Non-Disclosure Agreement.
Ophthalmic Goods Manufacturing

POSTED

5 days ago

DEADLINE

in 16 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 541380
Closed
Federal
Quality Control and Testing Services
Csa Southwest 6 Usda-Fs

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
Closed
Federal
Quality Assurance Testing and Laboratory Reporting
W2SD Endist New York

POSTED

4 months ago

CLOSED

2 months ago
View Details
NAICS: 541380
Closed
Federal
Quality Assurance, Testing, and Conformance Certification
FA8213 Aflcmc Ebhk

POSTED

4 months ago

CLOSED

2 months ago
View Details
NAICS: 541380
Closed
Federal
Structural Steel and Rock Bolt Testing
W075 Endist Sacramento

POSTED

4 months ago

CLOSED

2 months ago
View Details
NAICS: 541380
Closed
Federal
Asphalt and Bituminous Materials Testing
W075 Endist Sacramento

POSTED

4 months ago

CLOSED

2 months ago
View Details
NAICS: 541380
Closed
Federal
Concrete Testing and Quality Assurance
W075 Endist Sacramento

POSTED

4 months ago

CLOSED

2 months ago
View Details
NAICS: 541380
Closed
Federal
Soil and Aggregate Testing Services
W075 Endist Sacramento

POSTED

4 months ago

CLOSED

2 months ago
View Details
NAICS: 541380
Closed
Federal
Certificate of Analysis (COA) Generation and Quality Documentation
245-NETWORK Contract Office 5 (36C245)

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
Closed
Federal
Nanoparticle Physical and Chemical Characterization
245-NETWORK Contract Office 5 (36C245)

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
Closed
Federal
Technical Support and Calibration Services (Post-Delivery)
DOL - Cas Division 1 Procurement

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
Closed
Federal
Qualification Testing and Inspection Services
Ok DLA Aviation At Oklahoma City

POSTED

4 months ago

CLOSED

2 months ago
View Details
NAICS: 541380
Closed
Federal
Accredited Laboratory Analysis of Water Samples
W6QK Acc-Apg Cont Ct Tyad Ofc

POSTED

4 months ago

CLOSED

3 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS