Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

First Article Testing for Plain Seals

Open

Federal

Response Deadline11/19/2026, 11:00:00 AM CST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled First Article Testing for Plain Seals, involves performing validation testing for prime contractors on Defense Logistics Agency supply contracts. The primary scope of work focuses on conducting First Article Testing for CLIN 0002 to ensure that sample seals adhere to all technical specifications and performance requirements. This process utilizes specialized laboratory equipment to verify the chemical and physical properties of the seals, culminating in the delivery of a FAT Report and a certification of compliance. The opportunity is a total small business set-aside under NAICS code 541380, managed by the Department of Defense through the DLA Weapons Support Land Supplier Opns Vehicle Spt. Performance will take place in Anniston, Alabama. Interested parties must respond by November 19, 2026, following the posting date of November 8, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

NAICS

541380 - Testing Laboratories and Services

Place of Performance

ANNISTON, AL, 36201-4199, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE7L3-27-T-2448.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SEAL, PLAIN

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 8

subcontract

Response DeadlineNov 19

Submission deadline

Response Deadline

11/19/2026, 11:00:00 AM CSTin 11 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs validation testing for prime contractors on Defense Logistics Agency (DLA) supply contracts. Conducts First Article Testing (FAT) for CLIN 0002 to verify that sample seals meet all technical specifications and performance requirements. Utilizes testing laboratory equipment to verify physical and chemical properties. Delivers FAT Report and certification of compliance.

Similar Contracts

Same NAICS industry code

First Article Testing and ValidationThis subcontract for First Article Testing and Validation supports prime contractors on DLA Weapons Support Land Supply Chain projects. The selected provider will perform validation testing on five initial units to ensure the manufacturing process aligns with the Technical Data Package and established quality standards. Work involves using precision testing equipment and metrology to verify material properties and dimensions, and must be conducted within a certified testing facility located in New Cumberland. The primary deliverables for this engagement are five validated units and a formal First Article Test Report. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties must adhere to the response deadline of November 19, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

First Article Test (FAT) Execution

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

First Article and Production Lot Testing (PLT)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, focuses on providing critical quality assurance testing for prime contractors fulfilling DLA supply contracts. The scope of work involves executing First Article Testing to validate initial production runs and Production Lot Testing to maintain batch consistency. All activities must align with the Technical Requirements Package and the DLA Master List of Technical and Quality Requirements, utilizing specialized facilities to verify material and structural integrity. The contractor is responsible for delivering formal test reports and CDRL Form DD 1423 to document compliance. This opportunity is categorized under NAICS code 541380, with the place of performance located in Phoenix, Arizona. Interested parties must adhere to the response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Quality Assurance & Inspection ServicesThis subcontract for Quality Assurance and Inspection Services involves the independent verification and sampling of manufactured levers for prime contractors fulfilling DLA supply contracts. The scope of work requires the inspection of critical, major, and minor attributes utilizing coordinate measuring machines, calipers, and precision gauging. All activities must be performed in accordance with DLA Master List requirements and standards MIL-STD-1916 or ASQ H1331, culminating in the delivery of certification of conformance and detailed inspection reports. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Hill AFB. Classified under NAICS code 541380, the solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

First Article and Production Lot Testing (FAT/PLT)This subcontract involves providing technical testing services for prime contractors supporting DLA Weapons Support Land projects. The scope of work focuses on conducting First Article Testing on two units followed by Production Lot Testing to ensure quality conformance with the Technical Data Package. The successful contractor is responsible for delivering a First Article Test Report and validated results from the production lot testing. The project is managed under the Department of Defense and requires strict adherence to ITAR and EAR compliance, as well as JCP certification for necessary data access. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 19, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 1 hour ago

DEADLINE

First Article Test (FAT) ExecutionThis subcontract involves the execution of First Article Testing for prime contractors supporting DLA Weapons Support Maritime Hardware projects. The primary objective is to validate the design and manufacturing processes for 1.5 inch stainless steel valves in accordance with FAR 52.209-3 or 52.209-4. The successful contractor will be responsible for delivering a validated test unit and a formal FAT report to the Department of Defense at the New Cumberland facility. To be eligible for this engagement, providers must hold JCP certification to access export-controlled technical data and maintain CMMC Level 2 compliance. The opportunity was posted on November 8, 2026, with a response deadline of November 19, 2026. The work falls under NAICS code 541380 and is managed through the DDSP New Cumberland Facility.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

First Article Test (FAT) Evaluation and CertificationThis subcontract, titled First Article Test (FAT) Evaluation and Certification, involves performing critical testing for prime contractors on Defense Logistics Agency projects. The primary objective is to validate the design and manufacturing processes of frequency converters using specialized electronic testing and measurement equipment to ensure conversion accuracy. The selected provider will coordinate directly with the Engineering Support Activity for acceptability evaluations and is required to deliver a comprehensive FAT Report along with a certified first article sample. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the work is designated under NAICS code 541380. Performance of the contract will take place at Robins Air Force Base. Interested parties should note the response deadline of November 16, 2026, for this specific procurement effort.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

First Article Test (FAT) and Validation ServicesThis subcontract for First Article Test (FAT) and Validation Services supports the DLA Weapons Support Fluid Handling Division at Tinker AFB. The selected provider will perform critical testing for prime contractors to validate manufacturing processes, specifically executing protocols for dimensional inspection, material verification, and Class 3 thread compliance. These tasks must be completed using high-precision gauging or CMM equipment within a facility that maintains ISO 9001 or SAE AS9003 compliance. The primary deliverables for this engagement include a comprehensive FAT Certification report and one validated first-article unit. This opportunity is designated as a Women-Owned Small Business set-aside under NAICS code 541380. Interested parties must adhere to the response deadline of November 19, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

Third-Party Quality Inspection and Certification

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Quality Assurance and Technical Certification for Safety ValvesThis subcontract, issued by the Department of Defense through DLA DIST SAN JOAQUIN, focuses on providing quality assurance and technical certification for safety valves. The selected contractor will perform technical inspections and quality certifications for prime contractors to ensure that valve specifications align with NSN 4820-01-673-7805. Key responsibilities include conducting pressure testing using calibrated rigs in accordance with the DLA Master List of Technical and Quality Requirements and delivering final quality inspection reports and Certificates of Conformance. The work is designated under NAICS code 541380 and will be performed in Tracy, California. Interested parties should note the posting date of November 8, 2026, with a response deadline set for November 19, 2026.

DLA DIST SAN JOAQUIN

POSTED

about 1 hour ago

DEADLINE

First Article Test (FAT) Laboratory Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Production Lot Testing (PLT) SupportThis subcontract opportunity is for Production Lot Testing support benefiting the Department of Defense under the DLA Weapons Support Electrical Devices Division. The selected contractor will be responsible for coordinating production lot testing for prime contractors, which includes selecting random samples for Government Quality Assurance Representative review, preparing comprehensive test data packages with material certifications and inspection sheets, and managing traceable shipping to the Redstone Technical Test Center. The final deliverable consists of five validated test samples along with all necessary supporting documentation. The project is designated as a Total Small Business Set-Aside under NAICS code 541380, with the place of performance located in New Cumberland, Pennsylvania. Interested parties must respond by November 19, 2026, to be considered for this specialized quality assurance and logistics coordination role.

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

about 1 hour ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

Accessories Stowage Basket Fabrication and SupplyThis subcontract, issued by the Department of Defense under the DLA Weapons Support Land Supplier Operations Vehicle Support agency, requires the fabrication and supply of seven Accessories Stowage Baskets (NSN 2541016449257). The selected provider must manufacture the items according to specific technical data, conduct first article approval testing on three units, and ensure all packaging adheres to MIL-STD 129 and ASTM D3951 standards. Performance for this contract will take place in Texarkana, Texas. To be eligible, contractors must maintain a quality system certified under SAE AS9003 or ISO 9001 and hold US/Canada Joint Certification Program certification. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 332312. Interested parties must submit their responses by November 19, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 1 hour ago

DEADLINE

Defense-Compliant Packaging and Crating ServicesThis subcontract for Defense-Compliant Packaging and Crating Services involves providing specialized packaging, marking, and palletization for prime contractors supporting DLA Weapons Support Land projects. The scope of work requires the processing of four hardware units using MIL-SPEC materials and industrial labeling equipment to ensure full compliance with ASTM D3951 packaging standards, MIL-STD-129 marking and labeling requirements, and RP001 DLA palletization guidelines. The completed units are to be delivered to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania. This opportunity is managed under the Department of Defense for the DLA Weapons Support Land Supplier Operations Vehicle Support agency, falling under NAICS code 488410. The response deadline for this requirement is November 19, 2026.

Motor Vehicle Towing

POSTED

about 1 hour ago

DEADLINE

Manufacturing of Rigid Connecting Links (PN: A05-27895-000)This subcontract involves the manufacture of four finished and inspected rigid connecting links, part number A05-27895-000, for prime contractors supporting DLA Weapons Support Land projects. The fabrication process requires CNC milling and turning to ensure all components meet the technical and quality specifications outlined in the DLA Master List RA001. The contractor must adhere to strict regulatory standards, including the Buy American Act and the Berry Amendment for material sourcing, as well as NIST SP 800-171 cybersecurity standards. Performance will take place in New Cumberland, Pennsylvania, under the oversight of the Department of Defense.

POSTED

about 1 hour ago

DEADLINE

Metal Casting and Tooling for Vehicular FendersThis subcontract involves the metal casting and tooling of 30 vehicular fenders for the Department of Defense, specifically supporting DLA Weapons Support Land projects. The selected provider is responsible for producing the fenders according to the specified Technical Data Package and must develop and maintain all necessary production tooling. Final deliverables include the finished fenders and a Certificate of Quality Compliance. To be eligible, contractors must hold JCP certification and adhere to ISO 9001 or SAE AS9003 quality standards, along with CMMC Level 2 compliance. The use of additive manufacturing is strictly prohibited for this project. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 331511.

POSTED

about 1 hour ago

DEADLINE

Structural Channel Supply (NSN 2590-01-6573537)

Fabricated Structural Metal Manufacturing

POSTED

about 1 hour ago

DEADLINE

Supply of Nonmetallic Round Section Seals (NSN 5330-01-073-3160)This subcontract involves the supply of 20 nonmetallic round section seals, identified by NSN 5330-01-073-3160, for prime contractors supporting the Defense Logistics Agency under the Department of Defense. The contractor is responsible for manufacturing or sourcing these seals and ensuring they meet strict marking and packaging standards, specifically MIL-STD-130N, MIL-STD-2073-1E, MIL-STD-129, and SPI 12285103-2. Packaging must utilize medium duty, waterproof, greaseproof, and opaque bags to provide necessary UV protection. Performance will take place in Tracy, California, under NAICS code 326199. To be eligible, the provider must maintain CMMC Level 2 and NIST SP 800-171 compliance. The solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026.

All Other Plastics Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

Defense-Compliant Packaging and Marking ServicesThis subcontract for Defense-Compliant Packaging and Marking Services supports the Department of Defense under the DLA Weapons Support Land Supplier Operations Vehicle Support project. The scope of work involves providing specialized packaging and marking for 60 units of hub clamps, ensuring all items are palletized and ready for transport to DLA Distribution DDSP New Cumberland. The contractor must adhere to strict military standards, specifically packaging per MIL-STD-2073-1E, marking shipments per MIL-STD-129, and palletizing according to RP001. Additionally, all deliverables must maintain full compliance with QUP:001 and PRES MTHD:10 standards to meet agency requirements.

Freight Transportation Arrangement

POSTED

about 1 hour ago

DEADLINE

Manufacturing of Clamp, Hub (NSN 3040-01-106-7301)This subcontract involves the manufacturing of 60 hub clamps under NSN 3040-01-106-7301 for the DLA Weapons Support Land Supplier Operations Vehicle Support. The contractor is required to fabricate the units using precision machining according to the provided technical data package, with a strict prohibition on the use of additive manufacturing. Quality assurance must be performed in accordance with MIL-STD-1916 or ASQ H1331 to ensure all finished units meet the necessary specifications. To be eligible for this project, the contractor must hold JCP certification for technical data access and maintain CMMC Level 2 compliance. The scope of work concludes with the delivery of 60 fully finished and inspected hub clamps. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332710.

POSTED

about 1 hour ago

DEADLINE

Plain Seal SupplyThis subcontract involves the manufacture or sourcing of two plain seals matching NSN 5330016974589 for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations Vehicle Support. The contractor is responsible for delivering the items in medium duty, waterproof, greaseproof, and opaque bags, while ensuring full supply chain traceability documentation in accordance with DLA Directive Procurement Note C03. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 339112. To facilitate delivery and logistics, the contractor must be registered via the DLA Account Management and Provisioning System to utilize the Vendor Shipment Module. The solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026.

Surgical and Medical Instrument Manufacturing

POSTED

about 1 hour ago

DEADLINE

Military-Grade Packaging and Labeling for Vehicular ComponentsThis subcontract involves providing specialized packaging and marking services for vehicular components supporting DLA Weapons Support projects. The contractor is responsible for utilizing ASTM D3951 materials to ensure components are protected from damage during transit and applying all necessary markings and labels in strict accordance with MIL-STD-129 and RP001 standards. The final deliverables consist of brackets that are fully packaged and labeled for FOB Origin shipment to DLA Distribution DDSP New Cumberland. Managed under the Department of Defense for the DLA Weapons Support Land Supplier Operations Vehicle Support agency, the project falls under NAICS code 561910. The performance of these services is centered in New Cumberland, Pennsylvania. Interested parties must adhere to the response deadline of November 19, 2026, to be considered for this military-grade logistics requirement.

Packaging and Labeling Services

POSTED

about 1 hour ago

DEADLINE

Precision Machining and Fabrication of Vehicular Component BracketsThis subcontract involves the precision machining and fabrication of 20 vehicular component brackets for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Operations. The contractor is required to produce the brackets according to NSN 2590-01-525-4736 and provided TDP drawing revisions using CNC, milling, or turning equipment. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332710. Strict quality and environmental standards apply to this project, including a prohibition on Class I ozone-depleting chemicals. The contractor must maintain SAE AS9003 or ISO 9001 quality systems and adhere to MIL-STD-1916 or ASQ H1331 sampling protocols. The final deliverable consists of 20 finished brackets.

POSTED

about 1 hour ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Precision Metrology and Quality Validation for Aircraft Structural Component

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Quality Assurance and Lot Acceptance Testing

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Aerospace Quality Inspection and Testing

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

First Article Testing and Validation Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

First Article and Production Lot Testing (PLT) for Critical Safety Items

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 1 hour ago

DEADLINE

First Article Testing (FAT) and Dimensional Inspection

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 1 hour ago

DEADLINE

Textile and Materials Testing Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

First Article Testing (FAT) Services

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 1 hour ago

DEADLINE

First Article Testing (FAT) Services

DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

Independent Material Verification and Quality Assurance

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

First Article Testing and Certification Services

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

First Article Testing (FAT) and Certification Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS