Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Flow Imaging Microscopy combined with Light Obscuration Capabilities

Awarded

1333ND26QNB64009Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Commerce National Institute of Standards and Technology has issued an award notice for a contract focused on Flow Imaging Microscopy combined with Light Obscuration capabilities. This project, identified by solicitation number 1333ND26QNB64009, falls under NAICS code 334510 and is managed by the agency's office located in Gaithersburg, Maryland. The performance of the contract will take place in Gaithersburg, Maryland. Primary administrative coordination is handled by Rene D. Edwards, with Robert Singman serving as the secondary point of contact for the initiative.

General Info

NIST contract for Flow Imaging Microscopy and Light Obscuration capabilities in Gaithersburg, Maryland.

Agency

Department Of Commerce Nist

Contract Value

$147,245

NAICS

334510 - Electromedical and Electrotherapeutic Apparatus Manufacturing

Place of Performance

Gaithersburg, MD, 20899, USA

Set-Aside

NONE

Awardee

YOKOGAWA FLUID IMAGING TECHNOLOGIES, INC.

Award Issued Date

09/22/2026, 12:00:00 AM UTC

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedOct 13

Award Notice

AwardedSep 22

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Commerce Nist

Contacts2 people available

OfficeGAITHERSBURG, MD, 20899, USA

Organization / AgencyDepartment Of Commerce Nist

Office AddressGAITHERSBURG, MD, 20899, USA

Contacts

Rene D. Edwards

contact@example.gov

+1 (555) 000-0000

Robert Singman

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Flow Imaging Microscopy with light obscuraion.

Similar Contracts

Same NAICS industry code

Specialized Medical Component FabricationThis subcontract for Specialized Medical Component Fabrication involves the production of precision components for medical devices focused on trauma care and fracture stabilization. Working under prime contractors for BARDA projects within the Department of Health and Human Services, the selected provider will utilize precision CNC machining and molding to fabricate hardware from biocompatible polymers and medical-grade alloys. The contract requires strict adherence to FDA regulatory compliance and ISO 13485 certification to ensure the quality of the finished medical device components. Performance will take place in Washington, with a response deadline set for November 18, 2026.

Barda - Aspr / Daappo / Barda Dcma

POSTED

about 22 hours ago

DEADLINE

Automated Ultrasound-Based, Super Intelligence (SI)-Enabled Fracture Detection

Solicitation # BARDA-FY27-10192026

The Center for Biomedical Advanced Research and Development Authority (BARDA) has issued Sources Sought Notice BARDA-FY27-10192026 to identify innovative medical countermeasure technologies for the rapid triage of musculoskeletal injuries, such as fractures and soft tissue injuries of extremities. This request for information is intended for planning and market research purposes to assess commercially available or nearing-commercial technologies that utilize Super Intelligence (SI) and machine learning for automated ultrasound-based fracture detection. The goal is to find standalone, point-of-care devices that can operate in emergency departments, urgent care centers, and austere field settings without relying on traditional imaging infrastructure like X-ray or CT scans. The desired technology must feature automated volumetric capture, 3D-rotatable modeling, and SI-enabled image processing that outperforms human imaging experts and has undergone FDA 510k clearance processes. BARDA is interested in ruggedized, portable units with sufficient battery life for disaster response, interoperability with electronic health record systems, and minimal training requirements for non-specialist operators. Potential acquisition strategies being explored include direct purchases, leases, or vendor-managed inventory arrangements. Interested small businesses and other than small business concerns under NAICS code 334510 must submit their capabilities statements by 1:00 p.m. Eastern Time on November 18, 2026. Submissions must include separate Technical and Business Representation sections, each limited to 10 pages in 12-point Times New Roman font, and be emailed to Justin Moore and Richard Hall. Responses should detail the company's manufacturing capabilities within the United States, regulatory maturity, supply chain resilience, and cybersecurity standards for handling sensitive patient health information.

Barda - Aspr / Daappo / Barda Dcma

POSTED

about 22 hours ago

DEADLINE

Supplier of Digital Levels and Survey AccessoriesThis subcontract agreement establishes a supplier for digital levels and non-core survey accessories to support prime contractors working on projects for the California Department of General Services and Caltrans. The scope of work includes the delivery of digital leveling equipment and a variety of catalog-based accessories, such as poles, prisms, and tripods, all of which must adhere to general land surveying industry standards. Managed under the DGS Statewide Procurement agency, the contract falls under NAICS code 334510. The solicitation was posted on October 20, 2026, with a response deadline set for November 2, 2026.

DGS - Statewide Procurement

POSTED

DEADLINE

Supplier of Robotic Total Stations and Spatial StationsThis subcontract agreement establishes a supplier for high-precision robotic total stations and spatial stations to support prime contractors working on California Department of General Services and Caltrans projects. The contract requires the delivery of new, latest-model equipment, specifically robotic total stations featuring reflectorless capabilities exceeding 50 meters and single prism capabilities exceeding 800 meters. Additionally, spatial stations must provide scan rates of 25,000 points per second and maintain an angular accuracy of 3 arcseconds. All provided equipment must strictly adhere to IEC 60825-1 and ANSI Z136.1 laser safety standards. Managed under the DGS Statewide Procurement agency with NAICS code 334510, the solicitation was posted on October 20, 2026, with a response deadline of November 2, 2026.

DGS - Statewide Procurement

POSTED

DEADLINE

Digital Tomosynthesis Veterinary X-Ray System SupplierThis subcontract involves the supply of a complete portable digital tomosynthesis-capable X-ray system for prime contractors working on City of Norfolk veterinary projects for the Zoo. The required equipment includes a portable X-ray generator, tube, a digital radiographic detector with a minimum size of 6x6 inches, a tomosynthesis workstation, necessary software, and mobile carts. To ensure seamless integration and accessibility, the system must be fully DICOM compatible, PACS-ready for storage, and the software must adhere to WCAG compliance standards. The successful supplier will deliver one fully functional imaging system backed by a one-year manufacturer warranty. This procurement falls under NAICS code 334510, with a response deadline set for November 2, 2026.

POSTED

DEADLINE

Public Safety and Emergency Services - Request for Quotes - CSD Biometrics Scanner

Solicitation # AB-2026-06949

Public Safety and Emergency Services is seeking quotes for the procurement of an in-cell biometric and contactless health-monitoring sensor system. This technology will be implemented at the Edmonton and Calgary Remand Centres to track critical vital signs, specifically heart rate and respiration, for individuals in custody. The solicitation, identified as AB-2026-06949, was posted on October 19, 2026, with a response deadline of November 2, 2026. The project will be performed within Alberta, and interested parties should coordinate with the primary procurement officer, Paul Dinh, for further inquiries.

Public Safety and Emergency Services

POSTED

DEADLINE

Defibrillator Electrode Pad SupplierThis subcontract opportunity is for a supplier to provide defibrillator electrode pads to prime contractors supporting Department of Defense contracts through the Medical Supply Chain MD Surg FSF. The selected provider must manufacture or source electrode pads that strictly adhere to NSN 6515-01-613-1594 specifications. The scope of work includes comprehensive commercial packaging and packing to ensure each unit is sealed in a suitable container for protection, meeting all DLA packaging requirements for medical acquisitions. Interested parties must respond by October 26, 2026, for this requirement categorized under NAICS code 334510.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Battery Test Set ManufacturingThis subcontract involves the manufacture and supply of 16 complete Battery Test Sets for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Nuclear Reactor Program. The scope of work includes the assembly, integration, and quality assurance testing of the units to ensure they meet the strict specifications required for NSN 6625-01-737-4917, utilizing specialized electronics assembly equipment and calibration tools. The project falls under NAICS code 334510 and will be performed in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 30, 2026, for this procurement effort.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

ADAPTER, AIRWAY, CAPNOME

Solicitation # SPE2DS-27-T-0778

Solicitation SPE2DS-27-T-0778 is issued by the Department of Defense Medical Supply Chain for the procurement of one box of hand-held capnometer airway adapters, NSN 6515-01-623-0942. These disposable, non-sterile, white plastic adapters are designed for adult and pediatric use and must have a maximum dead-space of 6.0 ml. Each box contains 25 units. The items are subject to a non-extendable shelf life of 60 months, with a requirement that no more than 9 months have elapsed from the date of manufacture to the date of delivery to the government. The contract specifies delivery within 20 days after receipt of order to the Commanding Officer Station Sar Lemoore in California, with FOB, inspection, and acceptance all set to destination. Packaging must comply with ASTM D3951 and DLA requirement RP001, while labeling must adhere to MIL-STD-129 and the latest MMS1A revision, including the manufacturer date, expiration or retest date, and contract/lot number. Bidders must specify the source and part number being supplied. The award is governed by NAICS code 334510 and incorporates various FAR and DFARS clauses, including the HUBZone price evaluation preference and strict cybersecurity reporting requirements under DFARS 252.204-7012.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Orthopaedic Surgical Equipment SupplierThis subcontract opportunity is for the supply of high-tech surgical equipment to prime contractors supporting NHS Supply Chain orthopaedic and trauma theater projects. The scope of work includes the delivery and installation of advanced hardware such as robotic-assisted surgery systems, surgical navigation, imaging equipment, fluid management systems, arthroscopic consoles, and high-speed bone power tools. Managed by Supply Chain Coordination Limited, the contract requires suppliers to hold ISO 9001:2015 and CE Certification to ensure quality and safety standards. Interested parties must submit their responses by December 14, 2026, to be considered for providing these critical surgical technologies and robotic arms.

Supply Chain Coordination Limited

POSTED

DEADLINE

in about 2 months

TTSH_ITQ- R681595 - Supply, delivery, installation, testing and commissioning of 1 unit of Upper Limb Robotic Equipment for Rehab Therapy

Solicitation # Doc2444107354

This sourcing event, managed by ALPS Pte. Ltd. under solicitation number Doc2444107354, concerns the supply, delivery, installation, testing, and commissioning of one unit of Upper Limb Robotic Equipment for Rehab Therapy. The procurement process opens on October 19, 2026, at 5 PM SGT and closes on October 20, 2026, at 5 PM SGT, with a final response deadline set for October 27, 2026. All requests for clarification must be submitted in writing to the designated procurement officer via email no later than October 22, 2026, at 12 PM. To maintain a fair and open competition, ALPS will distribute all clarifications and responses to all participating vendors. Submissions must include the specific subject line TTSH_ITQ- R681595 to ensure proper processing.

POSTED

DEADLINE

Hampton Regional Medical Center Replacement MRI "Correction"

Solicitation # SUS108MR

Hampton Regional Medical Center is soliciting proposals for the procurement of a current-generation 1.5T whole-body MRI system. The selected vendor will be responsible for the delivery, installation, integration, testing, and ongoing support of the system, including all necessary coils and software. The scope of work encompasses comprehensive site planning, installation support, system integration, and the provision of training, warranty, and service support. To ensure continuity of patient care, the contract requires the vendor to provide interim mobile MRI coverage during the construction, deinstallation, and installation phases. This solicitation, identified as SUS108MR, is issued by Hampton Regional Medical Center in South Carolina. Interested parties must submit their responses by the deadline of October 30, 2026.

Hampton Regional Medical Center

POSTED

DEADLINE

More opportunities from Department Of Commerce Nist

Same awarding agency

Building 215 Clean Room HEPA Filter Replacement

Solicitation # RFI-195000-26-00181

The National Institute of Standards and Technology is conducting market research through a Request for Information for the Building 215 Advanced Measurement Laboratory cleanroom repair and HEPA filter replacement project in Gaithersburg, Maryland. This initiative follows a previous solicitation that failed to produce an acceptable offer, prompting NIST to reassess its acquisition strategy and seek industry feedback on constructability, cost, and schedule feasibility. The project scope involves the modernization of an 1,800 square meter facility, including the replacement of approximately 1,200 HEPA filters, 70 VAV terminal units, and 54 airflow monitoring devices, as well as the installation of 32 exhaust air control valves and associated ductwork repairs, testing, and recertification. A critical component of the project is the proposed phasing plan, which aims to minimize research disruptions by utilizing 19 construction phases, including 18 critical cleanroom outage phases. Each critical outage is currently envisioned as a nine-day window starting Friday evening and requiring 24/7 operations to achieve ready-for-re-occupancy by the following Monday morning. NIST is specifically requesting rough-order-of-magnitude cost estimates and industry input on whether this aggressive outage schedule is realistic or if it creates prohibitive risks and costs. Responses, including company experience and recommendations for improving competition and project execution, are due by October 14, 2026.

Industrial Building Construction

POSTED

DEADLINE

Optional Leak Check System SupplyThis contract involves the supply of an optional high-sensitivity leak detection system designed to verify the hermetic seal integrity within a microfluidic TEM cell. The primary focus is to provide a reliable solution that ensures the cells remain sealed, which is crucial for maintaining the integrity and performance of these specialized devices. The contract is classified under NAICS code 334511, indicating its association with electromedical and electrotherapeutic apparatus manufacturing. The contract is a subcontract issued by the Department of Commerce's National Institute of Standards and Technology (NIST) and is to be performed in Gaithersburg, Maryland, with the ZIP code 20899. Although specific solicitation details and set-aside statuses are not provided, the project emphasizes precision and quality in leak detection technology to support advanced microfluidic applications. This system will likely enhance the reliability and accuracy of microfluidic experiments or operations conducted using the TEM cell.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Installation and Training ServicesThe contract involves the on-site installation of a Transmission Electron Microscope (TEM) holder at the National Institute of Standards and Technology (NIST) facility located in Gaithersburg. Along with the installation, the contractor is responsible for providing comprehensive operator training to ensure proper use and maintenance of the equipment. This subcontract, classified under NAICS code 541330, supports specialized professional services related to the setup and operational readiness of high-precision scientific instruments. Issued by the Department of Commerce, NIST, the contract ensures that the TEM holder is installed at the specified Gaithersburg location, with a focus on delivering both technical installation and in-depth training. This dual service approach is designed to enhance user proficiency and optimize the performance of the equipment, supporting NIST’s mission of advancing measurement science. The contract was posted in May 2026 and is accessible through the System for Award Management (SAM) platform.

Engineering Services

POSTED

DEADLINE

Real-Time Sample Correction Software DevelopmentThe contract involves the development and integration of specialized software designed to provide real-time correction for sample drift during Transmission Electron Microscopy (TEM) imaging, thereby ensuring imaging stability. This work is categorized under the NAICS code 541512, which relates to computer systems design services. The contract is a subcontract issued by the Department of Commerce, specifically through the National Institute of Standards and Technology (NIST). The project is set to be performed in Gaithersburg, with a focus on enhancing the precision and reliability of TEM imaging by addressing sample drift issues in real time. While specific financial or timeline details are not provided, the contract aims to support advanced scientific research through improved imaging software, reflecting the Department of Commerce's commitment to technological innovation in measurement and standards.

Computer Systems Design Services

POSTED

DEADLINE

Integrated Fluid Delivery System SupplyThis contract entails the supply of an integrated fluid delivery system designed for precise fluid management during transmission electron microscopy (TEM) experiments. The system enables in-situ solution exchange and degassing, which are critical for maintaining experimental accuracy and fluid integrity under the microscope. The contract is classified under the NAICS code 333992, indicating its focus on fluid power valve and hose fitting manufacturing, emphasizing the technical specificity required. The subcontract is issued by the Department of Commerce's National Institute of Standards and Technology (NIST) and calls for performance in Gaithersburg, Maryland, ZIP code 20899. Specific details such as the solicitation number or set-aside type were not indicated. This procurement reflects the agency’s commitment to advancing experimental capabilities in scientific research by integrating sophisticated fluid handling systems directly into microscopy workflows.

Welding and Soldering Equipment Manufacturing

POSTED

DEADLINE

Electrochemical Liquid TEM Holder SupplyThe contract entails the supply of a specialized electrochemical liquid transmission electron microscopy (TEM) holder designed to facilitate operando imaging of material dynamics. This advanced TEM holder incorporates integrated heating and cooling functionalities, enabling precise temperature control during imaging processes. The equipment is intended to support detailed analysis of material behaviors under electrochemical conditions in real time. Issued by the Department of Commerce’s National Institute of Standards and Technology (NIST), the subcontract falls under the NAICS code 334516, which pertains to analytical laboratory instrument manufacturing. The performance location is specified as Gaithersburg, with a ZIP code of 20899. The contract was posted on May 20, 2026, and although some logistical details such as solicitation number and point of contact are not provided, the primary goal is the procurement of this customized TEM holder to enhance research capabilities in material science.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Precision Handling and Packaging of Micro SpecimensThis contract involves the development of specialized protocols for the safe handling, storage, and shipping of fragile micro specimens. The work focuses on creating custom fixtures designed to securely hold these delicate items, alongside implementing environmental protection measures to ensure their integrity during transportation and storage. The objective is to mitigate risks associated with damage caused by improper handling or adverse conditions. The contract is a subcontract issued by the Department of Commerce's National Institute of Standards and Technology (NIST), with the place of performance located in Gaithersburg. It falls under the NAICS code 488490, which pertains to specialized freight trucking services. The project was posted on May 6, 2026, and aims to enhance precision in the packaging and transportation of micro-scale specimens, ensuring they reach their destinations safely and remain viable for their intended scientific use.

Other Support Activities for Road Transportation

POSTED

DEADLINE

Materials Characterization and Quality Validation ServicesThis contract involves the independent verification of micro specimen properties, focusing on microstructure, composition, and mechanical behavior analysis. The services include comprehensive reporting and ensuring traceability throughout the verification process. It is classified under subcontracting and pertains to materials characterization and quality validation, intended to support high standards in material assessment. The contract falls under the NAICS code 541380, aligning with testing laboratories and related services. It is administered by the Department of Commerce's National Institute of Standards and Technology (NIST) and performed in Gaithersburg, Maryland, ZIP code 20899. The work is designed to enhance the accuracy and reliability of material property data, which is critical for subsequent research and development initiatives or quality assurance in manufacturing processes.

Testing Laboratories and Services

POSTED

DEADLINE

Micro-Sized Lead-Free Solder Specimen FabricationThe contract involves the fabrication of micro-sized lead-free solder specimens specifically designed for fracture testing in advanced packaging applications. The focus is on producing specimens with precisely controlled composition and microstructure to meet the requirements for evaluating the mechanical performance of solder materials in microelectronics. This work is crucial for advancing reliable lead-free solder technologies that comply with environmental regulations and enhance device durability. Issued by the Department of Commerce's National Institute of Standards and Technology (NIST), the subcontract aims to support research and development efforts within the advanced packaging industry. The place of performance is Gaithersburg, Maryland, highlighting a location known for its concentration of scientific research. The contract aligns with NAICS code 334419, which pertains to other electronic component manufacturing, indicating that this effort supports manufacturing-related innovation.

Other Electronic Component Manufacturing

POSTED

DEADLINE

Microfabrication of Electroplated Copper Micro SpecimensThis contract involves the design and fabrication of free-standing micro-scale copper specimens with highly controlled geometry, microstructure, and grain size to closely mimic semiconductor interconnects for mechanical testing purposes. The work requires precision microfabrication techniques, focusing on electroplated copper to replicate the physical and material properties of actual semiconductor components used in reliability assessments. The ultimate goal is to provide accurate test specimens that can aid in advancing the understanding of mechanical behavior in microelectronic materials. The subcontract is issued by the Department of Commerce, specifically the National Institute of Standards and Technology (NIST), with the place of performance located in Gaithersburg. The solicitation aligns with NAICS code 334418, indicating a focus on electronic instrument manufacturing. This effort supports the development of standardized testing methodologies by ensuring that specimens closely replicate real-world interconnect conditions at the micro-scale level.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Building Automation and Controls EngineeringThis contract involves providing engineering design and integration services focused on building automation, controls, and energy management systems tailored for laboratory and office settings. It is a subcontract opportunity under a Total Small Business Set-Aside program, aligned with NAICS code 541330, which covers engineering services. The contract is associated with the Department of Commerce, specifically the National Institute of Standards and Technology (NIST), and the work will be performed in Gaithersburg, Maryland, ZIP code 20899. The primary objective is to support NIST by delivering expert services that enhance building system efficiency and integration in controlled environments such as labs and offices. This contract emphasizes small business participation and aims to leverage specialized engineering expertise to improve automation and energy management in government facilities.

Engineering Services

POSTED

DEADLINE

Elevator Modernization EngineeringThe contract involves providing engineering services for the modernization and upgrade of elevator systems within NIST facilities, focusing on design, specifications, and ensuring compliance with relevant accessibility and safety standards. It is a subcontract opportunity under a Total Small Business Set-Aside, adhering to FAR 19.5 regulations, specifically falling under NAICS code 541330, which covers engineering services. The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is the contracting agency, with the work to be performed in Gaithersburg, Maryland (zip code 20899). The contract aims to enhance the reliability, safety, and accessibility of elevator systems at the facilities, aligning with federal standards and requirements.

Engineering Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS