This Solicitation opportunity from Government of Canada was posted on June 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

FORKLIFT - 4X4 10000LB OFF ROAD

Closed

0197034-27International

Submission Closed06/15/2026, 05:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # W8476-26M419/A

The Department of National Defence is seeking to procure fourteen EMD Forklifts with various configurations for delivery to Canadian Forces Base Dundurn, Trenton, and Borden. The required delivery timeline is 180 days following the award of the contract. This solicitation is restricted to suppliers who hold a Supply Arrangement under RFSA E60HS-21FRKL. Interested offerors must submit their proposals via email to the designated receiving address by the deadline of September 23, 2026. The procurement process allows for submissions in either official language of Canada, and the Crown maintains the right to negotiate with suppliers. Primary contact for this requirement is Contracting Authority Marie-Eve Bouchard.

Department of National Defence

POSTED

DEADLINE

Informal Bid - ID #1255603 - PROCUREMENT OF RAILROAD SWITCH TIES & SPIKES FOR RAILROAD REPAIRS AT TURNING BASIN TERMINAL

Solicitation # port-of-houston-authority-1255603

The Port of Houston Authority in Texas is seeking bids for the procurement of railroad switch ties and spikes to be used for repairs at the Turning Basin Terminal. The required materials must consist of A.R.E.M.A mixed hardware with 100 percent iron end plates. This informal bid, identified by solicitation number port-of-houston-authority-1255603, was posted on September 3, 2026. Interested parties must submit their responses by the deadline of September 10, 2026, at 7:00 PM.

Port of Houston Authority

POSTED

DEADLINE

Halifax-class Main Lube Oil System Spares

Solicitation # W8482-275494/A

The Department of National Defence is soliciting offers under solicitation number W8482-275494 for Halifax-class Main Lube Oil System Spares to support the starboard main lube oil coolers. The requirement consists of four line items: two Bush Front Covers (part number WE17027) and two Pneumatic Control Assemblies (part number WE20158-GA-NPT), both associated with Walton Engineering Co Ltd. These items are to be distributed between CFB Halifax and CFB Esquimalt, with specific quantities allocated to each location. Interested bidders must submit their proposals by September 17, 2026, including the Offeror Submission Details in both Excel and PDF formats, along with the Offeror Submission and Declaration forms. The procurement allows for the proposal of equivalent or substitute products provided the brand name, model, part number, and NCAGE are specified. The process includes detailed requirements for quality assurance, packaging, and potential controlled goods or hazardous materials certifications as outlined in the Statement of Requirements.

Department of National Defence

POSTED

DEADLINE

Aviation Replacement Parts for the Various Aircrafts

Solicitation # W8485-279587/A

The Department of National Defence, through the Directorate of Aerospace Procurement, is seeking to acquire six aviation replacement parts for various aircraft under solicitation W8485-279587/A. This procurement is restricted to qualified holders of Supply Arrangement W8485-184741 series, and a specific list of invited companies, including Honeywell Ltd, Rockwell Collins Canada, and PAL Aerospace, have been asked to submit proposals. The request for proposal documents are distributed directly by the contracting officer via email rather than through the Government Electronics Tendering System. Interested parties must submit their responses by September 15, 2026. Inquiries are directed to Ivan Khanzadeev, while those seeking to become qualified for the overarching Supply Arrangement may contact Megan McCandless.

Department of National Defence

POSTED

DEADLINE

Aviation Replacement Parts for the Various Aircrafts

Solicitation # W8485-279589/A

The Department of National Defence, through the Directorate of Aerospace Procurement, is seeking to acquire six aviation replacement parts for various aircraft under solicitation W8485-279589/A. This procurement is restricted to qualified holders of Supply Arrangement W8485-184741 series, and a specific list of invited companies, including Honeywell Ltd, Rockwell Collins Canada, and StandardAero Atlantic Inc, have been selected to submit proposals. The request for proposal documents are distributed directly by the contracting officer via email rather than through the Government Electronics Tendering System. Interested parties must submit their responses by September 11, 2026. Inquiries are directed to Ivan Khanzadeev at the Aerospace Equipment Program Management office in Gatineau, while those seeking to become qualified for the broader supply arrangement should contact Megan McCandless.

Department of National Defence

POSTED

DEADLINE

26-04060TD S70 MT & CT HPU Overhaul Material IFB

Solicitation # 26-04060TD

The Utah Transit Authority (UTA) has issued a firm fixed-price Invitation for Bids (IFB) to procure materials necessary for the overhaul and update of Hydraulic Power Units (HPUs) for its fleet of 77 Siemens S70 Light Rail Vehicles. The objective is to ensure reliable service for an additional 15 years through the replacement of wearable items and pump motors, with the actual overhaul work to be performed by UTA personnel. The contractor is required to provide materials packaged as complete kits; individual parts will not be accepted. Specifically, the procurement includes Kit A for Motor Truck HPUs, Kit B for Non-Power or Center Truck HPUs, and Kit C for updating MT/CT HPUs with Interface Blocks and pump motor half-life replacements. All parts must meet or exceed OEM specifications, maintenance manual requirements, and the standards detailed in the solicitation. Bids are due by October 8, 2026, at 3:00 pm via the Euna portal, and the award will be granted to the lowest responsive and responsible bidder based on the bid price of the parts. To be considered responsive, submissions must include a technical bid limited to 25 pages, a bid sheet, and all required signed forms and certifications. The contractor must maintain a Quality Assurance Program and provide completed test documents to certify that all materials meet specifications prior to delivery, which is FOB to a UTA-designated destination. This contract includes strict compliance with federal regulations, including the Build America, Buy America Act, ADA standards, and record retention requirements under 2 C.F.R. § 200.334. Payment for approved invoices will be issued within 30 calendar days of submittal.

POSTED

DEADLINE

NSC Spare Parts Kits SupplyThis subcontract through the Department of Homeland Security Sflc Procurement Branch 2 involves the supply of complete spare parts kits for NSC-type air compressors. The contractor is responsible for assembling and delivering kit part number WP65L-4KF-NSC, identified by NSN 2990-01-572-8195, for prime contractors working on US Coast Guard Surface Forces Logistics Center projects. All components must meet Condition Code A for new parts and adhere to ASTM D3951-98 commercial packaging standards. The work is performed in Curtis Bay, Maryland, under NAICS code 423860. The response deadline for this opportunity is September 10, 2026.

Sflc Procurement Branch 2(00085)

POSTED

DEADLINE

Supply and Delivery of One Diamond C Dump Trailer to Green River, Wyoming

Solicitation # 0048-N

The State of Wyoming is soliciting bids for the supply and delivery of one Diamond C Dump Trailer to Green River, Wyoming, under solicitation number 0048-N. All responses must be submitted electronically via the Public Purchase online bidding system by 2:00 p.m. Mountain Time on September 10, 2026. Submissions must be complete by the deadline to avoid being deemed non-responsive, and documents should be provided in PDF, Excel, or Microsoft Office formats. Interested parties must submit any individual questions through Public Purchase by 2:00 p.m. Mountain Time on September 3, 2026. Bidders are responsible for monitoring the Public Purchase system for all addenda, answers to questions, and award information, as the Wyoming Procurement Office will not provide these updates via email, phone, fax, or mail. The primary point of contact for this solicitation is Brenda Crozier.

POSTED

DEADLINE

Aviation Maintenance Parts IDIQThe Aviation Maintenance Parts IDIQ is a forecasted contract initiated by the Department of State to establish an Indefinite Delivery, Indefinite Quantity vehicle for aviation parts and services. The primary objective of this procurement is to create a more efficient sourcing mechanism that provides faster and more cost-effective access to essential aviation components. Classified under NAICS code 423860, the contract is designed to streamline the acquisition process for maintenance requirements, ensuring that necessary parts are available to support aviation operations without the delays associated with traditional procurement methods. This forecast was posted on August 20, 2026, and serves as an advance notice for potential industry participants. Interested parties can coordinate with designated points of contact, including Jamillah Timmons and Small Business Specialist Tyler Sinclair, for further inquiries. While specific set-aside details are not currently defined, the initiative represents a strategic effort by the Department of State to optimize its supply chain for aviation maintenance through a flexible and responsive contracting framework.

POSTED

DEADLINE

Transit Coach Fluids & Absorbent

Solicitation # 107-2026

The Southwest Ohio Regional Transit Authority (SORTA), operating as Cincinnati Metro, has issued solicitation 107-2026 for Transit Coach Fluids and Absorbent. This procurement is managed by the Maintenance agency in Cincinnati, Ohio, with a response deadline of September 16, 2026. The scope of work involves the delivery of specialized fluids and absorbents to support a fleet of approximately 390 vehicles, including fixed-route, paratransit, and micro-transit buses serving Hamilton, Butler, Clermont, and Warren Counties. The contractor is required to be fully qualified to perform these services in compliance with federal, state, and local laws, providing all necessary work products, manuals, and warranties. The contract is governed by custom terms and conditions rather than standard FAR clauses, emphasizing strict compliance with the Americans with Disabilities Act, the Clean Air Act, the Clean Water Act, and FTA drug and alcohol testing regulations. Key administrative requirements include the designation of an approved Project Manager, the maintenance of adequate liability insurance, and a commitment to maximize the participation of small and disadvantaged businesses. Invoices must be submitted in writing to the SORTA Accounts Payable Department in Cincinnati and must include a valid purchase order number. Performance is subject to inspection and acceptance by SORTA, with a strong emphasis on equal employment opportunity and non-debarment certifications.

POSTED

DEADLINE

Train Control Grade Crossing Spare Parts

Solicitation # 269-2027-2053

The City of Charlotte is soliciting bids under solicitation number 269-2027-2053 for the procurement and supply of Train Control Grade Crossing Spare Parts to support the Charlotte Area Transit System (CATS) in North Carolina. The primary objective is the delivery of compatible spare parts necessary for the operation of train control systems at grade crossings. The place of performance is located within North Carolina, specifically for the City of Charlotte and CATS. All submissions must be completed electronically through the Bonfire Procurement Portal by the response deadline of September 14, 2026. The solicitation was posted on August 17, 2026, and Andre Branch serves as the primary point of contact. While the procurement is for tangible goods, the provided documentation does not specify the contract value, detailed part lists, specific delivery schedules, or particular evaluation criteria. Vendors are instructed to use the Bonfire portal for all proposal uploads and to submit any clarifying questions through the portal's Vendor Discussions section.

POSTED

DEADLINE

RFP for Non-CDL Aerial Bucket Truck

Solicitation # 261709

The City of Hartsville is soliciting sealed bids for the procurement of a new, unused, current production non-CDL aerial bucket truck. Interested parties must submit their bids to City Hall at 100 E. Carolina Ave., Hartsville, South Carolina, ensuring that all submissions are clearly marked as RFP for Non-CDL Aerial Bucket Truck. The deadline for responses is September 17, 2026, at 6:00 PM. For further inquiries, the primary point of contact is Matt Mills, who can be reached via email or phone. This solicitation is managed by the City of Hartsville within the state of South Carolina.

City Of Hartsville

POSTED

28 days ago

DEADLINE

in 9 days

AI Contract Overview

The Department of Transportation & Infrastructure is seeking the supply and delivery of one 4X4, 10,000LB off-road forklift under solicitation number 0197034-27, with a bid submission deadline of June 15, 2026. Bidders must adhere strictly to the technical specifications provided and may propose equivalent products only if they submit detailed product information for pre-approval prior to bidding. All bids must include completed technical and product specifications, with pricing submitted as a unit price including all discounts, shipping, and delivery costs, multiplied by the quantity to determine the extended price; taxes must not be included in the total. The contract will be awarded to the lowest compliant bid, with the Department reserving the right to evaluate the bidder’s past performance over the previous five years through reference checks with other government departments, and any unsatisfactory results may lead to disqualification. Delivery must be completed within 180 days of contract award, and late deliveries are subject to cancellation. All inquiries must be submitted at least five calendar days before the closing date and must reference the tender number and deadline. Bidders are required to sign and date their submissions to confirm compliance.

General Info

Supply and delivery of one 10,000-pound capacity 4x4 forklift; bids due June 15, 2026.

Agency

Government of Canada → Central Tendering Branch

NAICS

423860 - Transportation Equipment and Supplies (except Motor Vehicle) Merchant WholesalersView NAICS

Place of Performance

New Brunswick, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJun 5

Solicitation

Response DeadlineJun 15

Deadline has passed

Submission Closed

06/15/2026, 05:30:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Central Tendering Branch

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → Central Tendering Branch

Office AddressN/A

Contacts

Sally GoodheartContracting Authority

contact@example.gov

+1 (555) 000-0000

Full Description

SCOPEThis Invitation to Tender consists of the supply and delivery of one (1) 4X4 -10 000LB Off Road Forklift on behalf of the Department of Transportation & Infrastructure (DTI).If bidder(s) choose to submit an "Equivalent Product", the bidder must submit the product information for the equivalent product to be pre-approved prior to bid submission. SPECIFICATIONSRefer to the attached Technical Specifications.SUBMITTALSBidders should include the completed technical specifications, and the product specifications with their bid submission.CONTRACT AWARD CRITERIACompliant bids will be evaluated and awarded based upon the lowest total price bid that meets the specifications listed within this document. Prior to contract award the department may conduct reference checks and reserves the right to contact other departments and agencies within GNB to obtain information on the bidder's past performance withing the previous five (5) years. Results from the aforementioned consultation that are unsatisfactory to the Department, in its sole and absolute discretion, will result in the disqualification of the bidder's bid.HOW TO SUBMIT PRICINGBidders are invited to submit their UNIT PRICE--the price for a single product within the Tender Item--under the 'Unit Price Including Discount' column. Bidders should then multiply their unit price by the 'Quantity/Unit' to calculate the 'Extended Price'. The 'Unit Price Including Discount' and 'Extended Price' column directly on this Invitation to Tender. The "Total including all charges" should not include taxes.Unit pricing MUST include all shipping and delivery costs.DELIVERY DATEBidder should deliver the within 180 days upon contract award.Deliveries thereafter the requested date may be cancelled.BIDDER QUESTIONSAll inquiries should be received five (5) calendar days prior to the closing date; any inquiries received less than five (5) calendar days prior to the closing date cannot be guaranteed a response. Please reference the tender number and closing date within your communications to ensure a prompt and accurate reply.REQUIREMENTSBIDDERS ARE REQUIRED TO SIGN AND DATE THEIR BID IN THE SPACE PROVIDED BELOW.10 000LB 4X4 OFF ROAD FORKLIFT

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS