Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from Department Of Veterans Affairs was posted on April 24, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

General Labor & Trade Coordination (Subcontractor Pool)

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238350
New
SLED
Board Chambers Countertop Installation Project
Solicitation # PWB-2637.1
The County of San Benito is soliciting lump-sum quotes for the fabrication and installation of a new fixed wood countertop within the County Board Chambers at 481 4th Street, Hollister, CA. The project involves furnishing and installing a 2-inch-thick Monterey Cypress wood countertop, approximately 30 inches deep, along the existing pony wall serving the Supervisors' main dais and the Clerk of the Board return area. The selected contractor is responsible for field verifying all dimensions and clearances, providing metal support brackets, and creating precise openings for microphones and cabling. The final product must be stained and finished to match existing furniture, subject to County approval of a color sample, and installed at a height of 30 inches above the finished floor. The project must be completed within 30 calendar days from the Notice to Proceed. Qualified contractors must be registered with the Department of Industrial Relations, adhere to prevailing wage requirements, and maintain a valid California contractor's license. Insurance requirements include Comprehensive General and Excess Public Liability and Property Damage Insurance of 1,000,000 dollars. Bidders must submit their proposals via the OpenGov portal by September 21, 2026. Local, minority, and disabled veterans businesses are encouraged to apply, and a 3 percent local preference may be applied to the award. All work must comply with applicable building, accessibility, and safety codes, and the contractor is required to coordinate scheduling with County staff to minimize operational disruptions.
Capital Improvement Projects

POSTED

about 22 hours ago

DEADLINE

in 9 days
NAICS: 238350
New
SLED
General Carpentry Services
Solicitation # GD 26-55
The Greater Dayton Regional Transit Authority (RTA) is soliciting bids for solicitation GD 26-55 to obtain as-needed general carpentry services across its various facilities in Ohio, including transit centers, administrative buildings, and the Wright Stop Plaza Tower. The scope of work encompasses commercial carpentry, framing, drywall, ceilings, doors and hardware, and finish carpentry. Services must be performed during normal business hours and coordinated to minimize disruption to public transit operations. The contract has an initial term of three years, with the possibility of two one-year extensions, for a total potential duration of five years. The engineer's estimate for the project is 1,640,000 dollars. The contract will be awarded to the lowest responsive and responsible bidder based on price, experience, financial responsibility, and equal opportunity employer status. Bids must be submitted via the OpenGov portal by November 3, 2026. Key requirements include a bid bond of 10 percent of the total bid amount, performance and payment bonds for the full contract price, and strict adherence to Buy America certifications and prevailing wage regulations. Contractors must also comply with FTA requirements, including seismic safety standards and non-discrimination guidelines. Payment is generally issued within 30 calendar days following invoice approval, and all work must be performed in a skillful and workmanlike manner subject to RTA inspection.
Capital Management/Executive

POSTED

about 23 hours ago

DEADLINE

in about 2 months

AI Contract Overview

Show more

This contract seeks qualified subcontractors to provide general labor and trade coordination services for a healthcare facility project in Leavenworth, Kansas, with a strict 180-day timeline. The scope of work includes demolition, framing, tiling, painting, electrical rough-in, and other finishing trades, all performed in compliance with the stringent standards required in a healthcare environment. The project is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, ensuring priority participation by eligible businesses that meet the criteria outlined under NAICS code 238350. Bids must be submitted by May 1, 2026, at 3:00 PM, and the contracting office is the Department of Veterans Affairs under the 255-NETWORK Contract Office 15. All work must be executed efficiently and safely to meet both contractual deadlines and healthcare operational requirements.

General Info

Service-Disabled Veteran-owned small businesses bid by May 1, 2026, for healthcare facility labor in Leavenworth, Kansas, within 180 days.

Agency

Department Of Veterans Affairs → 255-NETWORK Contract Office 15 (36C255)View Agency

NAICS

238350 - Finish Carpentry ContractorsView NAICS

Place of Performance

LEAVENWORTH, KS, 66048

Set-Aside

SDVOSBC

Documents

This scope was carved out of 36C25526Q0357.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Y1DA--589A6-24-407, Upgrade Building 71 Restrooms for ADA Compliance (VA-26-00044065)

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Veterans Affairs → 255-NETWORK Contract Office 15 (36C255)
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Veterans Affairs → 255-NETWORK Contract Office 15 (36C255)
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Support for demolition, framing, tiling, painting, electrical rough-in, and other finishing trades in a healthcare environment with 180-day schedule.

More opportunities from Department Of Veterans Affairs → 255-NETWORK Contract Office 15 (36C255)

Same awarding agency

NAICS: 333310
New
Federal
Supply and Install Pot, Pan and Utensil Washer for KC VAMC (brand name or equal to Hobart PW20)
Solicitation # 36C25526Q0656
The Department of Veterans Affairs, through the Heartland Network 15 Contracting Office, is conducting market research via a Sources Sought Notice to identify qualified small businesses, including SDVOSBs, VOSBs, 8(a), and HUBZone firms, for the procurement of a commercial pot, pan, and utensil washer. The requirement is for a new OEM commercial flight-type dishwasher, specifically a Hobart PW20 or an approved equal, to be installed at the Kansas City VA Medical Center in Missouri. The anticipated scope of work includes the removal and disposal of existing equipment, delivery, installation, commissioning, and the provision of on-site operator training. The equipment must meet strict physical dimensions, NSF sanitation standards, and UL/cUL safety listings, with a required minimum one-year parts and labor warranty. The project requires the contractor to complete delivery and installation within 60 calendar days of the order, with a target need-by date of November 15, 2026. Technical performance criteria include specific sanitization temperatures, water usage limits, and functional throughput capacities. Contractors must provide proof of authorized reseller status to prevent the use of gray-market items and must comply with VA security, privacy, and safety protocols, including PIV badging and infection control risk assessments. Interested parties must submit their capabilities statements and relevant OEM authorizations to the designated point of contact by September 15, 2026. The government may use this information to determine if the final procurement will be set aside for specific small business categories under NAICS code 333310.
Commercial and Service Industry Machinery Manufacturing

POSTED

1 day ago

DEADLINE

in 3 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS