Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

GENERATOR, ENGINE ACCES

Active
SPE7L1-26-T-886BFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract covers the procurement of a generator engine accessory with NSN 2920015959464, sourced from CUMMINS INC under part number 4982228, issued under solicitation SPE7L1-26-T-886B. Seven individual line items are specified, each for one unit delivered FOB origin with a five-day delivery window, zero quantity variance, and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 unless superseded by higher-priority DLA Master List of Technical and Quality Requirements, and all packaging and labeling must adhere to MIL-STD-129 with palletization conforming to RP001 requirements. Each unit is to be shipped as a single piece, with no parcel post allowed; transportation must use traceable freight methods. Delivery is directed to multiple global locations including Tinker AFB in Oklahoma, Camp Humphreys in South Korea, Fort Irwin in California, Rose Barracks in Germany, and Fort Hood in Texas, with specific RDD codes and transportation directives applied per destination. Required delivery dates range from April through July 2026, and all shipments must be accompanied by precise government use identifiers including TCN, IPD, DIC, and SUPP ADD codes. The contract enforces strict compliance with DLA's unit of issue standards and technical specifications, with the master requirements controlling over general packaging standards.

General Info

Procurement of seven generator engine accessories, FOB origin, delivered globally by July 2026, per MIL-STD-129 and DLA specs.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

336310 - Motor Vehicle Gasoline Engine and Engine Parts ManufacturingView NAICS

Place of Performance

7330 SENTRY BLVD BLDG 469 DOOR 10, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

SPE7L1-26-T-886B.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Kristina Derry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GENERATOR,ENGINE ACCESSORY
GENERATOR,ENGINE AC
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CUMMINS INC 0B8S3 P/N 4982228
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017540777 0001 EA 1.000
NSN/MATERIAL:2920015959464
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
SPE7L1-26-T-886B
SECTION B
PR: 7017540777 PRLI: 0001 CONT’D
REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
FB2037
FB2037 DLA DISTRIBUTION OKC
CP 405 855 3267
7330 SENTRY BLVD BLDG 469 DOOR 10
TINKER AFB OK 73145-8000
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB2037
FB2037 AF DLA DIST OKC OK
CP 405 855 3267
7330 SENTRY BLVD BLDG 469 DR 10W
TINKER AFB OK 73145
US
M/F: (TCN) FB203761980016
RDD: 777
PROJ: 123 TP 2
SUPP ADD: YBT884 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A0A DIST: 01 ADV: 2D FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:07/22/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017584490 0001 EA 1.000
NSN/MATERIAL:2920015959464
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
SPE7L1-26-T-886B
SECTION B
PR: 7017584490 PRLI: 0001 CONT’D
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
WT4KDK
0194 CS BN CO A COMPOSITE
AWCF SSF
CAMP HUMPHREYS BLDG P6953
PYEONGTAEK 17982
KR
RDD 999/NMCS SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANS SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
WT4KDK
0194 CS BN CO A COMPOSITE
AWCF SSF
CAMP HUMPHREYS BLDG P6953
PYEONGTAEK 17982
KR
MARKFOR
WT4KDK
0194 CS BN CO A COMPOSITE
AWCF SSF
CAMP HUMPHREYS BLDG P6953
PYEONGTAEK 17982
KR
M/F: (TCN) WT4KDK62030116
RDD: 999
PROJ: 9GD TP 1
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A01 DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:07/24/2026
SPE7L1-26-T-886B
SECTION B
PR: 7017584490 PRLI: 0001 CONT’D

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0003 7017524694 0001 EA 1.000
NSN/MATERIAL:2920015959464
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
FB6231
SPE7L1-26-T-886B
SECTION B
PR: 7017524694 PRLI: 0001 CONT’D
FB6231 133 AW LRS LGRDD
CP 612 713 2635
610 MILITIA DR BLDG 610
SAINT PAUL MN 55111-4112
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB6231
FB6231 133 AW LRS LGRDD
CP 612 713 2635
610 MILITIA DR BLDG 610
SAINT PAUL MN 55111
US
M/F: (TCN) FB623161970032
RDD:
PROJ: TP 3
SUPP ADD: YBZ999 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 10
DIC: A0A DIST: 01 ADV: 2D FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:07/21/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0004 7017484161 0001 EA 1.000
NSN/MATERIAL:2920015959464
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be
SPE7L1-26-T-886B
SECTION B
PR: 7017484161 PRLI: 0001 CONT’D
as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W80QJK
W6F7 SUP DIV DSSA CLASS IX
AWCF SSF
DEPOT ST REC WHSE BLDG 860
FORT IRWIN CA 92310-9986
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W80QJK
W6F7 SUP DIV DSSA CLASS IX
AWCF SSF
DEPOT ST REC WHSE BLDG 860
FORT IRWIN CA 92310-9986
US
MARKFOR
W80QJK
W6F7 SUP DIV DSSA CLASS IX
AWCF SSF
DEPOT ST REC WHSE BLDG 860
FORT IRWIN CA 92310-9986
SPE7L1-26-T-886B
SECTION B
PR: 7017484161 PRLI: 0001 CONT’D
US
M/F: (TCN) W80QJK61940620
RDD: N
PROJ: TP 1
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:07/16/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0005 7017562857 0001 EA 1.000
NSN/MATERIAL:2920015959464
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
SPE7L1-26-T-886B
SECTION B
PR: 7017562857 PRLI: 0001 CONT’D
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
WK4F8Q
W6Y1 USALRCTR BAVARIA
AWCF SSF 405TH AFSB EUR
ROSE BARRACKS SOUTH CAMP BLDG 113
VILSECK 92249
DE
RDD 999/NMCS SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANS SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
WK4F8Q
W6Y1 USALRCTR BAVARIA
AWCF SSF 405TH AFSB EUR
ROSE BARRACKS SOUTH CAMP BLDG 113
VILSECK 92249
DE
MARKFOR
WK4F8Q
W6Y1 USALRCTR BAVARIA
AWCF SSF 405TH AFSB EUR
ROSE BARRACKS SOUTH CAMP BLDG 113
VILSECK 92249
DE
M/F: (TCN) WK4F8Q62010179
RDD: 999
PROJ: 9GU TP 1
SUPP ADD: W9046W SIG: C
SPE7L1-26-T-886B
SECTION B
PR: 7017562857 PRLI: 0001 CONT’D
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A01 DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:07/23/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0006 7017541051 0001 EA 1.000
NSN/MATERIAL:2920015959464
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
SPE7L1-26-T-886B
SECTION B
PR: 7017541051 PRLI: 0001 CONT’D
REQUIREMENTS FOR PROCUREMENT
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
FB2037
FB2037 DLA DISTRIBUTION OKC
CP 405 855 3267
7330 SENTRY BLVD BLDG 469 DOOR 10
TINKER AFB OK 73145-8000
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB2037
FB2037 AF DLA DIST OKC OK
CP 405 855 3267
7330 SENTRY BLVD BLDG 469 DR 10W
TINKER AFB OK 73145
US
M/F: (TCN) FB203761980018
RDD: 777
PROJ: 123 TP 2
SUPP ADD: YBT884 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A0A DIST: 01 ADV: 2D FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:07/22/2026
SPE7L1-26-T-886B
SECTION B
PR: 7017541051 PRLI: 0001 CONT’D

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0007 7017242069 0001 EA 1.000
NSN/MATERIAL:2920015959464
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.
SPE7L1-26-T-886B
SECTION B
PR: 7017242069 PRLI: 0001 CONT’D
Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W80XYJ
0553 CS BN CO A COMPOSITE
AWCF SSF
BLDG 40054 MOTOR POOL ROAD
FORT HOOD TX 76544
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W80XYJ
0553 CS BN CO A COMPOSITE
AWCF SSF
BLDG 40054 MOTOR POOL ROAD
FORT HOOD TX 76544
US
MARKFOR
W80XYJ
0553 CS BN CO A COMPOSITE
AWCF SSF
BLDG 40054 MOTOR POOL ROAD
SPE7L1-26-T-886B
SECTION B
PR: 7017242069 PRLI: 0001 CONT’D
FORT HOOD TX 76544
US
M/F: (TCN) W80XYJ61010089
RDD: N
PROJ: TP 1
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:04/16/2026

SPE7L1-26-T-886B NSN/Part Number: 2920-01-595-9464 Quantity: 1 EA Purchase Request: 7017484161QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336310
New
DIBBS
NOZZLE, FUEL INJECTIONThe contract specifies the procurement of a fuel injection nozzle with part number 27910-10 and NSN 2910013183720, quantity of eight units, to be delivered within 20 days FOB origin. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific methods for preservation, wrapping, and unit containerization, with no special marking required. Palletization follows DLA packaging standards, and delivery is directed to the Assault Craft Unit 4 in Virginia Beach, Virginia, with explicit instructions to avoid parcel post and ship via the fastest traceable means. The required delivery date is July 10, 2026, with inspection and acceptance occurring at the destination. The contract includes detailed government-use identifiers, freight shipping information, and a point of contact for inquiries.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336310
New
DIBBS
POPPET, OVERRIDEThe contract pertains to the procurement of a single unit of a poppet override component identified by NSN 4820-01-484-0122 and part number V2D12101-1, supplied by VACCO INDUSTRIES, under solicitation SPE7MC-26-T-157A. Delivery is required within 20 days FOB origin to the USS HYMAN G RICKOVER in Groton, Connecticut, with no tolerance for quantity variance. The item must comply strictly with DLA packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking codes applied. Packaging must be palletized according to DLA’s procurement guidelines and shipped via the fastest traceable means, explicitly prohibiting parcel post. The shipment is designated RDD 777 and linked to project ZH9 TP 2, with specific freight and parcel post addresses provided for vendor use. The contract enforces stringent material restrictions, prohibiting all Class I ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, except for specific functional uses such as in batteries, fluorescent lights, sensors, weapon systems, or Navsea-specified chemical reagents. Portable devices containing mercury must be shock-proof and feature a secondary containment barrier consistent with NAVSEA 5100-003D. All technical and quality requirements referenced through R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Suppliers must adhere to the authorized DoD unit of issue and verify corresponding ANSI X12 equivalents via the official DLA link. The required delivery date is July 23, 2026, with the solicitation response deadline set for August 10, 2026, and point of contact information provided for vendor inquiries.
Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336310
New
DIBBS
O-RINGThis contract specifies the procurement of a single O-RING with National Stock Number 5331-01-670-1078 and part number 391 2882 499 from EATON CORP FLUID POWER OPNS, under solicitation SPE7L1-26-T-884B. The item must be delivered within five days of contract award, FOB origin, with no variance allowed in quantity, and is subject to inspection and acceptance at the destination. Packaging must strictly comply with MIL-STD-2073-1E and MIL-DTL-117, TYPE II, CLASS C, STYLE 1, requiring medium duty, waterproof, greaseproof, and opaque sealing to protect against ultraviolet degradation. Marking shall follow MIL-STD-129, including special instruction “20 -20 Do not bend,” and palletization must meet DLA packaging requirements. The supply is destined for Prince Sultan Air Base, Saudi Arabia, with freight logistics governed by DLAD PROC NOTES C19 and C20. Technical and quality requirements referenced via R and I numbers are defined in the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. The unit of issue is each, and the purchase request number is 7017636739. The contract includes federal supply classification data and imposes hazardous materials shipping compliance under IP025. The original required delivery date is July 27, 2026, with a response deadline of August 10, 2026.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336310
New
DIBBS
RETAINER, BALLThe contract is for the procurement of one ball retainer with NSN 4820-01-484-0103 and part number V2C13690-1 from VACCO Industries, under solicitation SPE7MC-26-T-156Y, issued by the Defense Logistics Agency. Delivery is required within 20 days, FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specified methods for preservation, wrapping, and containerization, and all marking must adhere to MIL-STD-129 with no special codes. Mercury and mercury-containing compounds are strictly prohibited from contact with the item unless specifically exempted for functional components like batteries or instruments specified by NAVSEA, and any such exempted items must include a secondary containment boundary. The item must be shipped via traceable freight to the USS HYMAN G RICKOVER (SSN 795) in Groton, Connecticut, with parcel post explicitly forbidden. The required delivery date is July 23, 2026, and the contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements referenced in the document.
Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336310
New
DIBBS
PUMP, FUEL, METERINGThe contract is for the procurement of two fuel metering pumps, cataloged under NSN 2910-01-691-5517 and CATERPILLAR part number 110-8897, classified as a commercial off-the-shelf item. The requirement mandates delivery within five days of award, with shipment to Fort Eustis, Virginia, under FOB origin terms and no tolerance for quantity variance. The items must be packaged in strict compliance with MIL-STD-2073-1E and marked in accordance with MIL-STD-129, with no special marking required, and palletization must follow DLA packaging standards. All supplies are prohibited from containing Class I ozone-depleting chemicals, and any substitute materials must be submitted for approval unless explicitly permitted by the specification. Inspection and acceptance occur at the destination, and shipment must use the fastest traceable method—parcel post is forbidden. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List, with the applicable revision tied to the solicitation or award date. The contract is a total small business set-aside under NAICS code 336310, with Kristina Derry listed as the primary point of contact. The required delivery date is July 28, 2026, and the contract number is SPE7L1-26-T-885L.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336310
New
DIBBS
PIN ASSEMBLY, PUSHThe contract pertains to the procurement of two units of a PIN ASSEMBLY, PUSH, identified by NSN 4820-00-036-3865, under solicitation SPE7MC-26-T-136F, issued by the Defense Logistics Agency. Delivery is required within 20 days after order placement, with a specified original delivery date of July 10, 2026, and all items must be shipped FOB destination to the USNS SALVOR (ARS 52) at FPO AP 96678, with inspection and acceptance also occurring at the destination. Packaging must strictly conform to MIL-STD-2073-1E with packaging code U, preservation method CLNG/DRY:1, wrap material JA, and unit container A1, while intermediate packaging uses EC containers. Marking must adhere to MIL-STD-129, including bar-coded data matrix symbols for logistics tracking, and no special marking is required. Mercury or mercury-containing compounds are strictly prohibited in packaging, preservation, and marking unless specifically exempted for functional uses in batteries, instrument sensors, weapon systems, or NAVSEA-specified reagents, with portable mercury-containing devices requiring shock-proof construction and a secondary containment barrier. All materials must comply with the DLA Master List of Technical and Quality Requirements and avoid any introduction of hazardous substances as mandated by DFARS 252.223-7001 and FAR 52.223-3. The contract includes mandatory compliance with a suite of federal and defense acquisition regulations, including clauses on combating human trafficking, employment eligibility verification, sustainable products, hazardous material identification, cybersecurity safeguards, and the prohibition of covered defense telecommunications equipment from certain Chinese entities. Contract performance is subject to electronic invoicing through Wide Area WorkFlow (WAWF), and payment is governed by streamlined procedures with accelerated payments available to small business subcontractors. Offerors must hold a valid Unique Entity ID and disclose socioeconomic status as a small business or under programs such as HUBZone, SDVOSB, WOSB, or SDB, along with complete representations under FAR and DFARS terms. The solicitation is issued under NAICS code 336310, with no set-aside designation, and responses must be submitted electronically via the DIBBS portal by the deadline of July 30, 2026. The procurement applies simplified acquisition procedures
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 336310
New
DIBBS
GENERATOR, ENGINE ACCESThe contract pertains to the procurement of five generator engine accessories with NSN 2920-01-595-9464 and part number 4982228 from CUMMINS INC, under solicitation SPE7L1-26-T-880Y. Delivery is required within five days of contract award, with FOB origin terms, zero tolerance for quantity variance, and inspection and acceptance occurring at the point of origin. All items must be packaged in accordance with MIL-STD-2073-1E, using packing code Q, level B, and marked per MIL-STD-129 with no special marking required; palletization must comply with DLA packaging standards. The units are to be shipped to the General Depot of Naval Supplies in Kaohsiung, Taiwan, with freight details governed by DLA procedural notes and no single freight forwarder assigned. The technical and quality requirements referenced are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The purchase price is set at $5.00 per unit for a total of $25.00, and the required delivery date is July 28, 2026, with the solicitation posted on July 27, 2026 and responses due by August 7, 2026. The contracting officer is Kristina Derry of the Department of Defense, Land Supply Chain, and the contract is classified under NAICS code 336310.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336310
New
DIBBS
VALVE, RELIEF, PRESSUThe contract pertains to the procurement of two relief pressure valves with NSN 4820-01-629-6894 and part number 11.1839/MLCP03AXAXB1V0NS, supplied by Emerson Automation Solutions and Proconex Inc. Delivery is required within five days of award, with shipment FOB origin and inspection and acceptance occurring at the destination. The unit of issue is each, with no allowable variance in quantity. All packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, cushioning, and containerization, and marking must adhere to MIL-STD-129 with no special marking required. The valves are to be delivered to Norfolk Naval Shipyard in Portsmouth, VA, with shipment directed via the fastest traceable means, explicitly excluding parcel post. The contract references the DLA Master List of Technical and Quality Requirements for applicable technical and quality standards identified by R or I numbers. The solicitation number is SPE7M0-26-T-019R, with a response deadline of August 7, 2026, and the contract falls under NAICS code 336310, administered by the Department of Defense through the Maritime Supply Chain ESOC Buys office. The point of contact for inquiries is Abaigael Masterson, with the original required delivery date set for December 8, 2025.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336310
New
DIBBS
FILTER, FLUIDThis contract is for the procurement of fluid filters under solicitation SPE7L3-26-U-0653, issued by the Department of Defense through the Land Supplier Operations Vehicle Support office. The item is identified by NSN 2910-01-644-0410 with a total quantity of 162 units, each unit priced at $162.00, resulting in a total contract value of $26,244. The delivery schedule requires shipment within 74 days, with delivery terms set at FOB origin, and inspections and acceptance occurring at the destination. The quantity is fixed with zero variance allowed, and the contract is structured as a total small business set-aside under NAICS code 336310. Packaging must comply fully with DLA’s Master List of Technical and Quality Requirements, which take priority over ASTM D3951, and all packaging and labeling must adhere to MIL-STD-129. Palletization is governed by RP001: DLA Packaging Requirements for Procurement, and government identification must be removed from non-accepted supplies. The contract references multiple approved part numbers from different manufacturers, including PTI Technologies Inc., PALL AeroPower Corporation, and Falls Filtration Technologies Inc., with the unit of issue being each unit. The contract specifies that technical and quality requirements incorporated by reference are drawn exclusively from the DLA Master List accessible via the official DLA eProcurement webpage, with the revision in effect on the solicitation issue date controlling for this simplified acquisition. All packaging must be marked with the correct Unit of Issue and Quantity per Unit Pack as specified in the contract. The designated point of contact for inquiries is Stephen Weaver, reachable via phone and email, and the solicitation response deadline is August 11, 2026. The solicitation was posted on July 27, 2026, and bidders must access the full details via the DIBBS platform. The contract does not guarantee purchase of the estimated quantity, as the final obligation rests with the IDA, and delivery must comply fully with DoD standardized unit of issue definitions.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 336310
New
DIBBS
O-RINGThe contract pertains to the procurement of six O-rings with NSN 5331-01-535-1192 under solicitation SPE7L5-26-T-4641, with a delivery requirement of 53 days ADO. These O-rings are classified under Federal Supply Classifications 5330/5331 and are subject to strict packaging mandates requiring medium-duty, waterproof, greaseproof, and opaque packaging conforming to MIL-DTL-117, Type II, Class C, Style 1, to protect against UV degradation. This packaging standard applies to all delivery types including direct vendor delivery, foreign military sales, and stock shipments. The item must be free of asbestos and any ozone-depleting chemicals, with mercury or mercury-containing compounds prohibited unless specifically exempted for functional components like batteries, fluorescent lamps, or instrument sensors under NAVSEA guidelines, in which case double containment and shockproof design are mandatory. Supply chain traceability documentation must be retained by the contractor per DLA Procurement Note C03 (August 2016), and government identification must be removed from non-accepted supplies. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The point of contact for this solicitation is Shane Harrington, and performance is to be delivered to New Cumberland, Pennsylvania, with responses due by August 7, 2026.
LAND SUPPLIER OPNS ENGINES

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336310
New
Federal
PUMP ASSEMBLY,FUELThis contract solicitation, identified as N0010426QXB89, seeks repair services for the PUMP ASSEMBLY,FUEL under a fixed-price arrangement, with emphasis on strict adherence to military standards and government-imposed performance timelines. The contractor must provide a firm-fixed-price, not-to-exceed, or estimated quote specifically for repair, excluding test and evaluation fees unless tied to a final determination of报废或返修状态. The repair turnaround time is mandated at 265 days from receipt of the asset at the contractor’s facility, as recorded in the Commercial Asset Visibility system, with penalties applied per unit per month for late delivery unless delays are excusable. The contractor must also commit to a monthly throughput capacity and adhere to an induction expiration date of 365 days post-award, beyond which repairs require bilateral consent. All repairs must comply with MIL-STD-130 marking requirements, DFARS 252.211-7003 for Item Unique Identification, and the government’s source inspection and packaging standards, including MIL-STD-2073. Only authorized repair sources may be awarded, and proof of authorized distributor status must accompany the proposal. The contract mandates full compliance with Buy American requirements, cybersecurity maturity certification, and small business subcontracting obligations, along with strict documentation and recordkeeping practices. All quotes must include unit and total repair pricing, RTAT duration, price type designation, CAGE codes for award, inspection, and shipping locations, as well as the basis of pricing and a minimum 90-day expiration. Price reductions are enforceable for unexcused RTAT delays, capped at a specified maximum per unit per month, without precluding government remedies such as termination for default. Technical adherence to manufacturer specifications, drawings, and approved repair procedures is required, with any design or part number changes subject to prior written approval. Documentation distribution is governed by strict classification and dissemination codes per OPNAVINST 5510.1, and all submissions must be electronically sent to the designated point of contact. Responses are due by August 10, 2026, and awardees must operate under the contract’s quality assurance, inspection, and logistics framework as managed through Navy CAV or Proxy CAV.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 336310
New
DIBBS
Exhaust Manifold Manufacturing and SupplyThe contract involves the manufacture and supply of exhaust manifolds designated by NSN 2815-00-920-2073, specifically for CUMMINS NTC-400 engines installed in M915 to M920 tactical military vehicles. Delivery must be made FOB origin with a strict turnaround time of eleven days from the date of award, emphasizing the urgency and operational readiness requirements of the end-use application. The work is classified under NAICS code 336310, which corresponds to engine and engine parts manufacturing, and is issued as a subcontract under the Department of Defense's Land Supplier Operations Engines division. The solicitation was posted on July 26, 2026, with a response deadline of August 6, 2026, indicating a compact procurement window to ensure rapid vendor selection and fulfillment. The place of performance is listed as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, suggesting the deliverables may be coordinated through a designated logistics or distribution hub within the defense supply chain. While no specific set-aside status or point of contact is provided, the contract is accessible via the DIBBS platform, indicating it is part of the Defense Logistics Agency’s transparent procurement system for defense contractors.
LAND SUPPLIER OPNS ENGINES

POSTED

2 days ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 332510
New
DIBBS
DISK, SOLID, PLAINThe contract pertains to the procurement of two solid plain disks with NSN 5340-01-005-1903 under solicitation SPE7L1-26-T-882P, issued by the Department of Defense’s Land Supply Chain. Delivery is required within 20 days of award, and responses are due by August 10, 2026. The item falls under NAICS code 332510, and the solicitation is governed by DLA packaging and technical quality requirements as outlined in the DLA Master List of Technical and Quality Requirements, accessible via the provided web link. All technical and quality specifications referenced by R or I numbers are incorporated by reference and must be strictly adhered to. Sampling and inspection protocols must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with the manufacturer allowed to choose attribute or variable inspection methods unless otherwise directed. Critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0; any unspecified attributes are deemed major. Acceptance criteria require zero non-conformances in the sample lot under MIL-STD-105/ASQ Z1.4 unless the contract specifies otherwise. Government identification must be removed from non-accepted supplies, and all provisions are subject to the revision of the DLA Master List in effect at the relevant solicitation or award date. Contact for inquiries is Michael Nordahl at dla.flbc2prs@dla.mil or 445-737-0596.
Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
COVER, ACCESSThe contract pertains to the procurement of one unit of a specific item identified by NSN 5340015750820 and part number AT364985 under solicitation SPE7L1-26-T-885S, with a required delivery within 20 days of award. The item must be delivered FOB origin with zero tolerance for quantity variance, inspected and accepted at the destination, and packaged in strict compliance with DLA’s Master List of Technical and Quality Requirements, which supersedes ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow RP001 guidelines. If the item is classified as hazardous under FED-STD-313, it must be packed in accordance with TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable. The item must be shipped by traceable means, not parcel post, and delivered to the designated military facility at Camp Lejeune, NC, using the specified freight address and contact information. The required delivery date is July 24, 2026, and the contract includes government-only identifiers and logistics codes for internal tracking and distribution. All technical and quality specifications referenced in the DLA Master List are binding and take precedence over any standard commercial practices.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333310
New
DIBBS
LIFTING TOOL, HUB ANThe contract solicits 14 units of a Hub and Final Drive Lifting Tool with NSN 4910-01-127-2712, under solicitation number SPE7L1-26-Q-1382, with a required delivery deadline 320 days after award. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date depending on acquisition size. The item must comply with DLA packaging requirements and严禁 the use of Class I ozone-depleting chemicals, requiring approval for any alternative substances unless explicitly permitted by specifications. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons anywhere, including U.S.-based subsidiaries or employees, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DLA export control training, and formal authorization from DLA. The place of performance is specified as Texarkana, Texas, 75507-5000, and the contracting officer is Adam Howell, reachable via email and phone provided. The NAICS code is 333310, and the solicitation was posted on July 28, 2026, with responses due by August 4, 2026.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAINThe contract pertains to the procurement of one unit of a plain seal identified by NSN 5330-01-584-9181 and purchase request number 7017465423, with a required delivery within 20 days to the destination APO AE 09321, FOB destination. Packaging must comply strictly with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containerization, with marking conforming to MIL-STD-129 and no special marking codes applied. The item is classified under the DoD unit of issue system, and packaging and palletization must adhere to DLA’s official packaging requirements referenced in RP001. The delivery is destined for the Royal Jordanian Air Force at Muwaffaq Salti Air Base in Jordan, with transportation logistics governed by DLAD procedural notes C19 and C20. The contract includes detailed government-use codes and project identifiers, and full technical and quality specifications are incorporated by reference from the DLA Master List of Technical and Quality Requirements. The solicitation number is SPE7L1-26-T-885J, issued under a federal acquisition framework with a response deadline of August 10, 2026, and an original required delivery date of July 15, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333618
New
DIBBS
TAPPET, ENGINE POPPEThe contract is for the procurement of six TAPPET, ENGINE POPPE LIFTER, VALVE units with NSN 2815-00-450-9341 and part number 7S3161 supplied by CATERPILLAR INC. Each unit has a fixed price of $6.00, resulting in a total contract value of $36.00, with delivery required within five days of award at FOB origin. The items must be packaged in strict compliance with ASTM D3951 and MIL-STD-129, adhering to the DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. Packaging must follow RP001 guidelines, with palletization conforming to specified DLA requirements and no parcel post permitted for shipment. Deliveries are to be routed to the government facility at Fort Eustis, Virginia, with a required delivery date of July 27, 2026, and must be sent by the fastest traceable means. The contract enforces zero variance in quantity and mandates inspection and acceptance at destination. Government-specific identifiers and markings are required, and all supplies must be labeled and documented according to DLA protocols, including the use of the provided military freight address, mark for details, and tracking information. The solicitation number is SPE7L1-26-T-883V, issued under the Department of Defense’s Land Supply Chain, with procurement subject to federal acquisition regulations and technical directives.
Other Engine Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332119
New
DIBBS
SPACER, RINGThe contract is for one spacer ring identified by NSN 5365-15-120-2240 and part number 60154625 manufactured by IVECO DEFENCE VEHICLES S.P.A., classified as a commercial item under DoD procurement guidelines. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with applicable revisions tied to the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA packaging standards, including specific methods for preservation, wrapping, and unit containerization, with marking conforming to MIL-STD-129 and no special marking codes applied. Sampling and inspection follow MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, and acceptance requires zero non-conformances unless otherwise directed. Delivery is FOB origin within 20 days, with inspection and acceptance occurring at destination, and no quantity variance is permitted. The item must be shipped by the fastest traceable means, explicitly excluding parcel post, to the designated military destination in Camp Lejeune, North Carolina. The contract is issued under solicitation SPE7L1-26-T-884G with a required delivery date of July 22, 2026, and ties to a purchase request number 7017607337 under a single unit of issue at a fixed price of $1.00. Government-specific data codes and shipping instructions are provided for logistics coordination, with procurement oversight by the Department of Defense’s Land Supply Chain through Katherine Woods as the point of contact.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336350
New
DIBBS
GEAR SUBASSEMBLY, SPThe contract pertains to the procurement of one gear subassembly with NSN 3010-01-570-7423 and part number A88245047, issued under solicitation SPE7L1-26-T-883Q by the Department of Defense’s Land Supply Chain. Delivery is required within five days of contract award, with shipment FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 and MIL-STD-129, with all DLA Master List of Technical and Quality Requirements taking precedence. The item must be palletized per DLA packaging standards and shipped via traceable means, excluding parcel post, to the designated delivery point in Burlington, Kentucky. The unit of issue is each, with a total price of one unit at $1.00, and the required delivery date is July 29, 2026. All markings, labels, and documentation must follow specified government formatting guidelines, including the inclusion of the government procurement request number and designated shipping identifiers.
Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC STThe contract is for the procurement of 22 units of a nonmetallic strip seal with NSN 5330-01-183-7118, under solicitation SPE7L1-26-T-884U, issued by the Department of Defense’s Land Supply Chain. The item is classified as a commercial off-the-shelf product, and delivery is required within five days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. Sampling and inspection must comply with MIL-STD-1916 or ASQ H1331 Table 1, using a zero-defect acceptance criterion unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. The place of performance is Tinker AFB, OK, with Kristina Derry listed as the primary point of contact and the response deadline set for August 10, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336340
New
DIBBS
PARTS KIT, AIR-HYDRAThe contract is for a Parts Kit, Hydraulic Brake Slave Cylinder with NSN 2530-00-204-9906, quantity of 33 units, under Purchase Request 7017385501, with delivery required within 185 days after award. The solicitation number is SPE7L1-26-Q-1381, issued on July 28, 2026, with responses due by August 4, 2026. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent quality controls including tailored higher-level contract quality requirements, configuration change management via engineering change proposals and variance requests, and inspection and acceptance at origin. Export control regulations under ITAR or EAR apply to associated technical data, restricting its disclosure to foreign persons regardless of location, and compliance with DFARS 252.225-7048 is mandatory. Access to controlled data is limited to contractors approved by DLA who hold a valid US/Canada Joint Certification Program credential, have completed mandated training, and have passed the DLA Export-Controlled Technical Data Questionnaire. The place of performance is Tracy, California, with the contracting office under the Department of Defense’s Land Supply Chain, and the primary point of contact is Adam Howell.
Motor Vehicle Brake System Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336390
New
DIBBS
CABLE AND CONDUIT AThe contract pertains to the procurement of one unit of a vehicular cable and conduit assembly identified by NSN 2530015596286 and part number 15300, supplied by SILVER EAGLE MANUFACTURING CO, under solicitation SPE7L1-26-T-885M. Delivery is required within 20 days from the award date with FOB origin terms, and no variance in quantity is permitted. The item must be packaged and preserved in strict compliance with MIL-STD-2073-1E and NEMA-WC26 standards, with marking governed by MIL-STD-129 and special preservation method ZZ as defined in SPE7L1-26-T-885M. The product is to be delivered to the designated government facility at 3920 KIRKWOOD HWY, WILMINGTON DE 19808-5194, with shipment required via the fastest traceable means and parcel post expressly prohibited. Inspection and acceptance occur at destination, and all packaging and shipping of hazardous materials must adhere to IP025 specifications. Preservation, packaging, and packing methods follow the technical requirements referenced in the DLA Master List of Technical and Quality Requirements. The contract includes precise government-only identifiers and logistical codes including TCN M2232061980033, RDD, and project code TP 2, with the original required delivery date set for July 23, 2026. Point of contact for procurement inquiries is Kristina Derry at DLA.
Other Motor Vehicle Parts Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details