Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Generator Set Semi-Annual Preservation and Layup Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract involves the semi-annual preservation and layup services for three 3516E generator sets aboard the USS Blue Ridge. The scope of work includes thorough inspection, cleaning, sealing, application of vapor corrosion inhibitor (VCI) oil, and management of desiccants to ensure the generators remain in optimal condition during periods of non-use. The preservation work aims to prevent corrosion and maintain the operational readiness of these critical power units. The contract is a subcontract designated as a Total Small Business Set-Aside under the Small Business Administration guidelines, specifically aligned with NAICS code 811310, which covers commercial and industrial machinery and equipment repair and maintenance. The Department of Defense's Naval Surface Warfare Center Philadelphia Division is the agency overseeing this service contract, emphasizing the importance of maintaining military equipment readiness. The performance location details are not specified, but the work is intended to take place aboard the USS Blue Ridge.

General Info

Semi-annual preservation and layup of three USS Blue Ridge 3516E generators, preventing corrosion.

Agency

Department Of Defense → Nswc Philadelphia Division

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

PA

Set-Aside

SBA

Documents

This scope was carved out of N6449826P2059.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

GENSET Preservation and Layup

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJun 4

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Nswc Philadelphia Division

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Nswc Philadelphia Division

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Biannual preservation of three 3516E generator sets including inspection, cleaning, sealing, VCI oil application, and desiccant management aboard USS Blue Ridge.

Similar Contracts

Same NAICS industry code

Bus Fire Suppression System Maintenance

Solicitation # WMATA-0000010906

The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed through the agency's Virginia operations. The solicitation was posted on October 28, 2026, and requires all responses to be submitted by the deadline of November 4, 2026. Interested parties can access further details and manage their bids through the official WMATA supplier portal.

Washington Metropolitan Area Transit Authority

POSTED

about 1 hour ago

DEADLINE

Kubota M8200 Clutch Replacement

Solicitation # kubota-m8200-clutch-replacement

Management & Training Corporation is soliciting bids for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include the replacement of friction discs, bearings, oil seals, and O-rings, as well as resurfacing the flywheel and replacing hydraulic pipes and filters as necessary. All work must adhere to manufacturer specifications, and the final acceptance is contingent upon the Facility Maintenance Department verifying proper clutch engagement and PTO operation under load. This is a fee-for-service solicitation with a lump sum award based on best value. Interested offerors must submit a bid sheet, a completed supplier packet including a W-9 and self-certification form, and proof of insurance by November 3, 2026. The contract is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone concerns, and requires compliance with various Federal Acquisition Regulations, including Service Contract Labor Standards and Buy American provisions. Proposals must include an itemized breakdown of costs and warranty information for parts and labor.

Earle C. Clements Job Corps Center

POSTED

about 1 hour ago

DEADLINE

Commercial Dishwashing & Steam Equipment ServicesThis subcontract opportunity with the Georgia Institute of Technology involves providing specialized repair and preventative maintenance for commercial dishwashers and steam-based equipment within dining facility projects. The scope of work includes critical technical tasks such as descaling boilers, repairing pumps, cleaning spray arms, and replacing steam valves to ensure all systems remain fully operational. Qualified candidates must hold a valid plumbing or mechanical license to perform these services. Interested parties should note that the response deadline is November 13, 2026, and the project falls under NAICS code 811310.

Georgia Institute of Technology

POSTED

about 3 hours ago

DEADLINE

Commercial Hot-Side Equipment Repair & MaintenanceThis subcontract for Commercial Hot-Side Equipment Repair and Maintenance involves providing repair and preventative maintenance services for commercial cooking and heating equipment at Georgia Institute of Technology dining facilities. The scope of work includes burner cleaning, pilot light repair, calibration of ovens and broilers, and the replacement of heating elements. The primary objective is to ensure all cooking equipment is safe and operational, with the delivery of completed preventative maintenance checklists. Qualified contractors must hold a mechanical license or a gas fitter certification to perform these services. The solicitation was posted on October 28, 2026, with a response deadline of November 13, 2026. This opportunity falls under NAICS code 811310 and is intended for those working as subcontractors for prime contractors on these specific institutional projects.

Georgia Institute of Technology

POSTED

about 3 hours ago

DEADLINE

Kitchen Equipment Repair & PM Services for GT Dining

Solicitation # PE-50300-RFQ-2027-000000353

The Georgia Institute of Technology is soliciting proposals under solicitation number PE-50300-RFQ-2027-000000353 for kitchen equipment repair and preventative maintenance services. The scope of work involves providing these essential maintenance and repair services for the Georgia Tech campus located in Atlanta, Georgia. This solicitation was posted on October 28, 2026, and requires responses to be submitted by November 13, 2026, at 5:00 PM UTC. Interested parties should coordinate with the primary point of contact, Anaya Carter-Merritt, and submit their proposals through the designated agency portal.

Georgia Institute of Technology

POSTED

about 3 hours ago

DEADLINE

271982 - Generator Monitoring - Houston Co Health Dept

Solicitation # SRC0000037434

Solicitation SRC0000037434 is a sole source procurement for generator monitoring services for the Houston County Health Department in Alabama. The contract is managed by the State of Alabama and is subject to a maximum total cost of 25,000 dollars. The agreement allows for annual renewals by both parties for a total duration of up to five years from the effective date. The contract is governed by the Standard Terms and Conditions for Quick Quotes, incorporating the Department of Finance Administrative Code and designating Montgomery, Alabama, as the sole venue for litigation and dispute resolution. Key requirements for the supplier include registration with the Alabama Secretary of State for foreign entities, enrollment in the E-Verify program, and certification of compliance with Alabama state and local tax laws. The State of Alabama maintains the right to inspect all products before acceptance, and payment is processed via electronic methods such as P-cards or EFT. Suppliers must submit all responses electronically through the Alabama Buys portal.

POSTED

about 4 hours ago

DEADLINE

IFB #26028 - 295.00 - Elevator Maintenance on the Governor Mario M Cuomo Bridge for NY Division

Solicitation # 49244

The New York State Thruway Authority is soliciting bids for the maintenance, inspection, repair, and testing of eight Fraco SEL-1000B Industrial Lifts for Personnel and Loads. These lifts are located within the New York Division at the Governor Mario M. Cuomo Bridge in Tarrytown, New York. The scope of work includes performing required service on a monthly, quarterly, and yearly basis to ensure operational safety and compliance. This solicitation, identified as IFB 26028, falls under NAICS code 811310 for commercial and industrial machinery and equipment repair and maintenance. Interested contracting firms must submit their responses by the deadline of November 30, 2026. The procurement is being managed by the New York State Thruway Authority Procurement Services.

New York State Thruway Authority - Procurement Services

POSTED

about 6 hours ago

DEADLINE

in about 1 month

On-Call Tent Repair and Emergency MaintenanceThis subcontract, titled On-Call Tent Repair and Emergency Maintenance, provides specialized labor for major repairs and emergency maintenance on Maryland Historical Trust facility projects. The contractor is responsible for performing structural overhauls and emergency repairs to canvas and tent structures both during and after normal working hours, utilizing industrial sewing equipment and specialized repair kits. All work must be performed in strict adherence to site-specific soil disturbance protocols to protect the project environment. Managed under the Maryland Department of Planning, the contract requires the delivery of fully repaired structures accompanied by itemized invoices. The solicitation was posted on October 28, 2026, with a response deadline of November 16, 2026. The work falls under NAICS code 811310, focusing on providing essential support services to prime contractors overseeing these historical facility projects.

Department of Planning

POSTED

about 7 hours ago

DEADLINE

NLV Pharos Buoy Crane 5-year service

Solicitation # TPHA/BCRN/2720

The Northern Lighthouse Board is soliciting quotes for the 5-year service and re-certification of the Liebherr RL-S 2650-30 Litronic buoy crane located on the NLV Pharos vessel at Leith docks. The project is estimated to be valued at 33,000 GBP excluding VAT. The primary objective is to ensure the crane is re-certified by December 20th, with maintenance works scheduled between December 13th and 17th, followed by attendance at a third-party load testing and inspection on December 18th. All performing engineers must be OEM and Class approved to work on this specific crane model. Interested parties must submit their proposals via the eSourcing portal by November 11, 2026, at 2:00pm. Submissions must include a proposed method of works, labor details, a program of expected timeframes, examples of previous works, and an itemized pricing quote. The award will be determined based on a weighted evaluation consisting of 60 percent for capability and technical price and 40 percent for price. The primary point of contact for this solicitation is Nicola Walker.

Northern Lighthouse Board

POSTED

about 7 hours ago

DEADLINE

ISO 14952 Level 300A Precision CleaningThis small business set-aside subcontract involves providing high-level technical cleaning services for prime contractors supporting the NASA Shared Services Center. The primary objective is the precision cleaning of filter components to meet ISO 14952 latest revision level 300A standards, ensuring that all parts are free of residue and particle contamination for use in space-flight environments. To achieve these rigorous specifications, the contractor must utilize cleanroom facilities or specialized chemical cleaning baths. All delivered components must be accompanied by ISO 14952 Level 300A certification. This opportunity falls under NAICS code 811310 and is specifically designated as a total small business set-aside.

NASA Shared Services Center

POSTED

about 8 hours ago

DEADLINE

Emergency Generator and Automatic Transfer Switch (ATS) Maintenance ServicesThis subcontract for the Indian Health Service involves providing comprehensive maintenance services for emergency generators and automatic transfer switches at facilities in Lawton, Oklahoma. The scope of work includes performing preventive maintenance, operational testing, and corrective repairs to ensure emergency power supply systems remain fully functional. Key technical requirements include monthly inspections, oil changes, 30-minute building-load tests, and annual 4-hour load-bank tests, as well as updating ATS software and firmware to maintain NFPA 110 compliance. To qualify for this engagement, contractors must possess MTU/Detroit Diesel certification and have access to the necessary load-bank equipment. The primary objective is to deliver ready-to-run systems supported by detailed electronic maintenance reports. This opportunity is designated as a Buy Indian Set-Aside under NAICS code 811310, specifically for the Department of Health and Human Services.

Indian Health Service

POSTED

about 8 hours ago

DEADLINE

Centrifugal Pump Repair & OverhaulThis subcontract involves the comprehensive repair and overhaul of a centrifugal pump unit supporting US Navy NAVSUP Weapon Systems Support projects. The scope of work includes the complete teardown, technical evaluation, and mechanical repair or modification of the unit in accordance with Cage Code 93232 and Reference Number RW-173417. Following repairs, the contractor is responsible for reassembly and functional testing conducted under TDP Version 005. The final deliverable is one fully operational pump unit that must successfully pass a Government Source Inspection. This project falls under NAICS code 811310 and is managed through the Department of Defense. Interested parties should note the response deadline of November 12, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

More opportunities from Department Of Defense → Nswc Philadelphia Division

Same awarding agency

Electrical Enclosure & Control System FabricationThis subcontract for Electrical Enclosure and Control System Fabrication supports the Naval Surface Warfare Center, Philadelphia Division. The scope of work involves the manufacture of specialized electrical enclosures and control valve assemblies for prime contractors, specifically fabricating MKIII REE, SEE, Mini-AU, AU, and various cooling, cleaning, and pulper control valves according to NAVSEA specifications. Performance of the contract takes place in Philadelphia. To ensure quality and security, the contractor must maintain ISO 9001:2015 certification and comply with NIST SP-800-171 and DFARS 252.246-7007 standards for supply chain traceability. The project falls under NAICS code 335999 and requires the final delivery of completed enclosures and valve assemblies.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 8 hours ago

DEADLINE

Solid Waste Shredder FabricationThis subcontract for Solid Waste Shredder Fabrication involves the production and testing of Mod I Metal and Glass Shredders as well as Mod I Plastics Waste Shredders. Working for prime contractors on projects for the Naval Surface Warfare Center, Philadelphia Division, the selected provider must manufacture units according to NAVSEA drawings of record for Top Level Assembly and Interface. The final deliverable consists of fully completed and tested shredder units. The project is managed under the Department of Defense and requires strict adherence to ISO 9001:2015 and NIST SP-800-171 compliance standards. Performance will take place in Philadelphia, Pennsylvania. Interested parties should note the response deadline of November 12, 2026, for this effort categorized under NAICS code 333999.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 8 hours ago

DEADLINE

Pulper System Fabrication (Large & Small)This subcontract involves the fabrication and testing of Mod I Large and Small Pulper systems for prime contractors supporting the Naval Surface Warfare Center, Philadelphia Division. The selected provider is responsible for manufacturing these systems in strict accordance with NAVSEA drawings and conducting all necessary testing based on specified interface drawings to ensure full operational functionality before delivery. The project is managed under the Department of Defense and requires the contractor to maintain ISO 9001:2015 and NIST SP-800-171 compliance. Performance will take place in Philadelphia, with the primary objective being the delivery of completed and verified Pulper systems that meet all technical and security standards.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 8 hours ago

DEADLINE

Plastics Waste Processing Equipment (PWP) FabricationThis subcontract involves the fabrication, production, and testing of Mod I and Mod II Plastics Waste Processors and Mod I CMU Assemblies for the Naval Surface Warfare Center, Philadelphia Division. The selected contractor is responsible for manufacturing equipment according to NAVSEA drawings of record and conducting rigorous testing as specified in the statement of work attachments to ensure the delivery of fully completed and tested units. Performance of this contract requires strict adherence to quality and security standards, including ISO 9001:2015, NIST SP-800-171, and DFARS 252.246-7007 compliance. The work will be performed in Philadelphia, Pennsylvania, under NAICS code 333999, supporting Department of Defense initiatives.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 8 hours ago

DEADLINE

Fairbanks Morse EDG Owners Group

Solicitation # N64498-26-SIMACQ-PD-42-0343

Professional Organizations

POSTED

about 8 hours ago

DEADLINE

BIG BLUE MACHALTS

Solicitation # N6449827Q5002

The Department of Defense, specifically the NSWC Philadelphia Division, has issued solicitation N6449827Q5002 for a requirement titled Big Blue Machalts. This procurement falls under NAICS code 336611 and is managed by the office located in Philadelphia, Pennsylvania. Interested parties must submit their responses by the deadline of November 12, 2026. For further inquiries or detailed specifications, the primary point of contact is Anthony Ricciardi, who can be reached via email or phone. Additional documentation and submission details are available through the provided government workspace link.

Ship Building and Repairing

POSTED

about 8 hours ago

DEADLINE

NSWCPD BIG BLUE 4 Pre-Solicitation Notice

Solicitation # PD-25-0222

Ship Building and Repairing

POSTED

about 8 hours ago

DEADLINE

PD-33-0001; Solid Waste Pulper

Solicitation # N64498-27-RFPREQ-PD-33-0001

The Naval Surface Warfare Center, Philadelphia Division (NSWCPD) is conducting market research via a Sources Sought notice for the production, testing, and delivery of solid waste processing equipment for naval ships. The requirement includes the procurement of plastic waste processing equipment, large and small pulpers, and solid waste shredders, specifically Mod I Metal and Glass Shredders and Plastics Waste Shredders, as well as associated control valves. The anticipated contract will be a Firm-Fixed-Price IDIQ with a five-year period of performance, including a 60-month ordering period. Manufacturing and testing will occur at the contractor's facility, with deliveries made to NSWCPD Philadelphia and various U.S. Navy ship construction or alteration sites, including locations in Pennsylvania, Virginia, Wisconsin, Mississippi, and Maine. Interested businesses, including large and small concerns such as HUBZone, 8(a) SDB, and SDVOSB, must submit a capability statement of no more than eight pages by 6:00 PM EST on November 12, 2026. Submissions must demonstrate prime contractor experience with similar requirements, the technical ability to perform at least 50 percent of the work with internal employees, and the capacity to manage the project's magnitude. The equipment must be manufactured according to NAVSEA drawings of record and adhere to ISO 9001:2015 quality standards. Additionally, contractors must comply with DFARS 252.246-7007 regarding counterfeit part prevention and NIST SP-800-171 for the protection of Controlled Unclassified Information. A formal Request for Proposal is expected to be issued in April 2026 via SAM.gov.

POSTED

about 8 hours ago

DEADLINE

BIG BLUE 3 MAC - N64498-26-Q-5284

Solicitation # N6449826Q5284

The BIG BLUE 3 MAC solicitation, identified by number N6449826Q5284, is issued by the Department of Defense through the Naval Surface Warfare Center Philadelphia Division. This procurement falls under NAICS code 336611, indicating a focus on the manufacture of boat and marine vessel engines. The opportunity was posted on October 27, 2026, with a response deadline set for November 2, 2026. The contracting office is located in Philadelphia, Pennsylvania. Interested parties may coordinate with the primary point of contact, Anthony Ricciardi, for further inquiries. Detailed specifications and submission requirements can be accessed via the provided government portals.

Ship Building and Repairing

POSTED

DEADLINE

PD-42-0030; PIP – Rolls Royce Marine Gas Turbines

Solicitation # N64498-26-RFPREQ-PD-42-0030_1

Engineering Services

POSTED

DEADLINE

Servo Valve SupplyThis subcontract involves the supply of high-precision electro-hydraulic servo valves for prime contractors working on submarine projects for the Naval Surface Warfare Center, Philadelphia Division. The scope of work requires the sourcing and rigorous testing of valves to guarantee precise fluid control and response times, ensuring all components meet strict Navy technical specifications for performance and reliability. The project is managed under the Department of Defense with performance taking place in Philadelphia, Pennsylvania. Interested parties should note the posting date of October 26, 2026, with a response deadline set for November 2, 2026. The contract is categorized under NAICS code 332911.

Industrial Valve Manufacturing

POSTED

DEADLINE

Directional Control Valve SupplyThis subcontract involves the procurement and supply of specialized directional control valves for prime contractors supporting the Naval Surface Warfare Center, Philadelphia Division. The scope of work requires the delivery of Navy-approved solenoid or manual valves specifically engineered for high-pressure submarine environments, ensuring all components meet rigorous flow, pressure, and interface specifications. The project is managed under the Department of Defense with performance taking place in Philadelphia. Interested parties must adhere to the established timeline, with the solicitation posted on October 26, 2026, and a response deadline set for November 2, 2026. The contract falls under NAICS code 332911, focusing on the delivery of high-quality, validated hardware for critical naval submarine projects.

Industrial Valve Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Hydraulic System Testing and Repair

FA8538 Afsc Pzaab

POSTED

CLOSED

Cruse Scanner Hardware Installation and Integration

FA8604 Aflcmc Pzi

POSTED

CLOSED

ADA Wheelchair Lift Maintenance

US Embassy Seoul

POSTED

DEADLINE

Hydraulic Freight Elevator Maintenance

US Embassy Seoul

POSTED

DEADLINE

Elevator Preventive Maintenance – Chancery Units

US Embassy Seoul

POSTED

DEADLINE

Emergency Diesel Generator Preventive Maintenance (Quarterly & Periodic)

Norfolk Naval Shipyard Gf

POSTED

CLOSED

Emergency Elevator Repair and Call-Back Services

260-NETWORK Contract Office 20 (36C260)

POSTED

CLOSED

Non-Routine Elevator Maintenance Labor

260-NETWORK Contract Office 20 (36C260)

POSTED

CLOSED

Preventive Elevator Maintenance – Building 27 & 40 (Employee Elevators E5–E8)

260-NETWORK Contract Office 20 (36C260)

POSTED

CLOSED

Preventive Elevator Maintenance – Building 1 (Passenger & Pharmacy Elevators)

260-NETWORK Contract Office 20 (36C260)

POSTED

CLOSED

Warranty & Repair Parts Support (European Theater)

0409 Aq Hq Contract

POSTED

CLOSED

REPAIR KIT, SOLENOID

Solicitation # SPE7MC-26-T-9319

Defense Logistics Agency

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS