Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

GLOVES, MEN'S AND WOMEN

Active
SPE1C1-26-T-1562Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of men’s and women’s gloves conforming to the MechaniX MG55 spec sheet under Cage Code 07LZ4, with five size variants identified by NSN and UPC codes: small, medium, large, x-large, and xx-large. Each size has a unique NSN and UPC for tracking, and no PDMs, FAT, or patterns are required. The gloves are subject to technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Covered defense information provisions and DLA packaging standards apply, and government identification must be removed from non-accepted supplies. The purchase request is for 20 pairs of the medium size NSN 8415-01-677-9241, with a 20-day delivery timeline after order award. The solicitation number is SPE1C1-26-T-1562, issued by the Department of Defense through C and T Supply Chain, with a response deadline of August 10, 2026, and performance location at JBSA Lackland, TX 78236-5214. Primary point of contact is Ryan Zarkowski with provided email and phone details.

General Info

Procure 20 medium MechaniX MG55 gloves, NSN 8415-01-677-9241, deliver in 20 days to JBSA Lackland, TX.

Agency

Department Of Defense → C AND T SUPPLY CHAINView Agency

NAICS

315210 - Cut and Sew Apparel ContractorsView NAICS

Place of Performance

1865 SELFRIDGE AVE BLDG 5160 STE 4, JBSA LACKLAND, TX, 78236-5214, US

Set-Aside

NONE

Documents

(1)

SPE1C1-26-T-1562.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → C AND T SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → C AND T SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Ryan Zarkowski
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GLOVES,MEN'S AND WOMEN'S
GLOVES, MEN'S AND WOMEN'S PGC00625
GLOVES, MEN'S AND WOMEN'S SHALL BE MADE IN ACCORDANCE WITH MECHANIX
(CAGE 07LZ4) MG55 SPEC SHEET.
NSN,,,,,,,,,,SIZE,,,,,,UPC
8415-01-677-9240 SMALL 718020994918
8415-01-677-9241 MEDIUM,,,,,,718020994901
8415-01-677-9246 LARGE,,,,,,718020994871
8415-01-677-9248 X-LARGE,,,,,,718020994857
8415-01-667-9250 XX-LARGE,,,,,,718020994840
PDM's are NOT required. FAT is NOT required. NO PATTERN.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES NSN/Part Number: 8415-01-677-9241 Quantity: 20 PR Purchase Request: 7017546802QTY: 20 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 315210
New
DIBBS
GLOVES, MEN'S AND WOMENGloves for men and women must be manufactured in strict compliance with the MechaniX MG55 spec sheet under cage code 07LZ4, with available sizes including small, medium, large, x-large, and xx-large, each linked to a specific NSN and UPC. The NSNs are 8415-01-677-9240 through 8415-01-667-9250, corresponding to the respective sizes and barcode identifiers, and no PDMs, FAT, or patterns are required. Procurement is governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size, and all supplies must meet DLA packaging standards. Government identification must be removed from non-accepted items, and covered defense information provisions may apply. The solicitation is issued under SPE1C1-26-T-1564 with a response deadline of August 10, 2026, and requires delivery within 20 days of award. The order specifies 20 pairs for a single purchase request, with performance occurring at JBSA Lackland, Texas, under the Department of Defense’s C and T Supply Chain. Primary point of contact is Ryan Zarkowski, reachable via provided phone and email.
C AND T SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 315210
New
DIBBS
GLOVES, FIREMEN'SThe contract is for the procurement of firemen’s structural gloves, specifically part number LPG928BK in size L (NSN 8415-01-737-8691), with a quantity of 15 pairs to be delivered within 20 days FOB destination. The gloves are certified to NFPA standards and feature a three-piece back-of-hand design for enhanced flexibility and grip, constructed from Eversoft water-repellent thermal cowhide split leather with Lite N Dri cushioning for knuckle protection. Integrated Kovenex thermal fabric provides superior resistance to heat, flame, cuts, and tears, while a Gore Crosstech insert ensures breathable, liquid-proof protection. All items must comply with DLA Master List of Technical and Quality Requirements and cannot deviate from specified materials or construction. Packaging must adhere to MIL-STD-129 labeling and DLA packaging guidelines, with commercial packaging per ASTM D3951 only acceptable if the item is not classified as hazardous under FED-STD-313. Palletization must follow RP001 requirements, and no parcel post is permitted for shipment. Deliveries must be traceable and sent to the specified freight address at Cherry Point, North Carolina, with inspection and acceptance occurring at the delivery point and no tolerance allowed for quantity variance. The contract is issued under solicitation SPE8EZ-26-T-0026 by the Defense Logistics Agency, with a required delivery date of April 14, 2026, and the point of contact is Robert Singley.
Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 315210
New
Federal
Fire Fighter's EnsembleThe Solicitation N6278626Q0005 issued by the Supervisor of Shipbuilding, Conversion and Repair, Bath (SUPSHIP Bath), seeks the procurement of Honeywell Morning Pride Firefighter Ensembles (FFE) for use by Civilian Mariner Crew Members and Navy personnel during shipboard fire emergencies. This requirement specifies brand-new, unaltered two-piece ensembles consisting of turnout coats and turnout pants in bronze color, model LTO 96I3, manufactured exclusively in the United States and compliant with NFPA 1971-2013 (and the latest edition), as well as OSHA Standard 29 CFR 1910.1030. The brand name Honeywell is mandatory; no grey market, refurbished, or non-original products will be accepted. The solicitation has been amended to remove the prior small business set aside, allowing large businesses to compete, but only direct authorized resellers with documented certification of manufacturer-approved distribution channels for federal sales are eligible. Submittals must include full pricing per line item inclusive of all shipping costs under FOB Destination San Diego, CA, along with delivery lead time, product verification, and company details including CAGE Code, UEI/DUNS number, SAM.gov registration, and small business status. The delivery location is 8511 Kerns St., Dock 5, San Diego, CA 92154, with a maximum delivery window of 60 days after receipt of order, though faster delivery may receive preference. Quotes must remain valid for 30 days past the closing date and are to be submitted via email to the designated government contacts. The evaluation will be based on a Firm-Fixed-Price contract award determined by Best Value, with technical acceptability—including compliance with brand name, country of origin, and safety standards—as a mandatory pass/fail gate. Price, delivery schedule, and past performance are weighted factors in the selection. The solicitation incorporates numerous FAR and DFARS clauses addressing cybersecurity, information safeguarding, payment procedures, export controls, whistleblower rights, and supplier restrictions, including the requirement for NIST SP 800-171 compliance and the prohibition on ByteDance-related applications. Payment will be processed through Wide Area Workflow and electronic submission systems. All submissions are subject to review for responsiveness, and failure to meet any mandatory requirement will result in non-responsiveness. The Government retains full discretion to reject any or all offers without obligation.
Supply Of Shipbuilding Conv And Repair

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 315210
New
Federal
Future Soldier T-shirtsThis contract, issued under solicitation number W9124D26QA279 by the W6QM Micc-Ft Knox office of the Department of Defense, mandates the production, printing, packaging, and distribution of 75,000 US Army Future Soldier T-shirts to 69 Military Entrance Processing Stations, 38 Battalions, and the US Army Recruiting Division Headquarters. The contractor is responsible for all costs related to freight and shipping, including deliveries to overseas locations, and must comply with the Berry Amendment, requiring all textile materials and manufacturing to be wholly of U.S. origin. The shirts must feature specific artwork—including the American Flag on the right sleeve, the Army Logo on the front, and BAYCB on the back—with each shirt individually folded and packaged in a clear poly bag clearly labeled with size, and shipped in boxes by size according to strict guidelines: no more than 50 shirts per box for MEPS and USARD deliveries, with international shipments not exceeding 70 pounds or 108 inches in combined length and girth. All outer cartons must include the contract number, purchase order number, size, quantity, and final destination address, with no barcoding or machine-readable labels required. The solicitation is a Small Business Set-Aside under NAICS code 315210 and will result in a firm-fixed-price award to the lowest-priced, technically acceptable offeror on a Lowest Price Technically Acceptable (LPTA) basis, with no trade-offs allowed between cost and technical factors. Technical acceptability hinges on compliance with the Berry Amendment, SAM.gov registration, and adherence to packaging, labeling, and distribution requirements outlined in the Statement of Work and supporting attachments, including updated artwork and the distribution list. The response deadline has been extended to August 3, 2026, at 10:00 AM EDT, and proposals must be submitted electronically via email to the designated contracting officers. Delivery of all T-shirts must be completed by November 19, 2026, with final acceptance centralized at Fort Knox, Kentucky, under F.O.B. Destination terms. The contractor must maintain active SAM.gov registration, comply with all applicable FAR and DFARS clauses including restrictions on subcontractor sales, whistleblower rights, executive compensation reporting, and prohibitions on certain foreign telecommunications equipment and interrogation practices, and submit documentation affirming U.S.-only sourcing throughout the supply chain. The contracting officer is Lauren Zuniga,
W6QM Micc-Ft Knox

POSTED

about 23 hours ago

DEADLINE

in 5 days
View Details
NAICS: 315210
New
DIBBS
MAS SHIELD KIT, SPECThe contract pertains to the procurement of MAS SHIELD KITS, SPEC, identified by NSN 8415015940416, with two identical line items each representing one unit at a unit price of $1.00, totaling $2.00. The items are designated for Medium/Large and X-Large/X-Large Wide cages, both manufactured by GENTEX CORPORATION under part number 05D12001-2. Delivery is required within 20 days after receipt of order, with FOB Destination terms, and must be shipped using the fastest traceable means—parcel post is strictly prohibited. The delivery destination is Marine Aviation Logistics Squadron 39 at Camp Pendleton, California, with specific freight and parcel post addresses provided. Packaging and labeling must comply strictly with MIL-STD-129, and palletization must adhere to DLA’s RP001 packaging requirements. If the material is classified as hazardous under FED-STD-313, it must be packaged per TQ Requirement IP025; otherwise, commercial packaging per ASTM D3951 is required, with all DLA Master List of Technical and Quality Requirements superseding ASTM standards. The Unit of Issue is EA, with a Quantity per Unit Pack of 001, and no variance in quantity is permitted. Inspection and acceptance occur at origin. The solicitation number is SPE1C1-26-T-1532, issued under the Department of Defense’s DLA Troop Support, C and T Supply Chain, with a NAICS code of 315210 and a HUBZone price evaluation preference applicable for award. The contract incorporates numerous FAR and DFARS clauses pertaining to cybersecurity, employment equity, trafficking prevention, sustainable products, hazardous materials, data rights, subcontractor payments, and compliance with System for Award Management requirements. Contractors must register in SAM and use WAWF for electronic invoicing and receiving reports. All submissions are considered information, not offers, and the Government assumes no liability for submission costs. The original required delivery date is July 14, 2026, and the contract includes strict compliance mandates for hazardous materials labeling per 29 CFR 1910.1200, adherence to federal and state regulations, and the retention of government rights to use and disclose hazardous material data.
C AND T SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 315210
New
Federal
BNO Fire Fighter Uniforms for DDJCThis contract solicitation, SP330026Q0220, is a single award Firm Fixed Price contract for the procurement of Brand Name Only firefighter uniforms, specifically Workrite Part Numbers FP50 pants and FSC2 NAV shirts. The contract is exclusively for these specified items with no substitutions allowed, and all custom alterations including tailoring, hemming, and patch sewing must be performed separately by the contractor. The solicitation is a Total Small Business Set-Aside under NAICS code 315210, reserved solely for small businesses as defined by the SBA. The contract will be awarded by the Department of Defense through DLA Distribution, with performance designated to occur in Tracy, California, while the office responsible for administration is located in New Cumberland, Pennsylvania. Responses must be submitted by August 14, 2026, at 5:00 PM Eastern Time, and inquiries should be directed to Michael Hayes Minto or Eric Hopkins. The solicitation was posted on July 27, 2026, and is available through the SAM.gov platform.
DLA Distribution

POSTED

2 days ago

DEADLINE

in 16 days
View Details
NAICS: 315210
New
SLED
Uniform Manufacturing and Supply
Procurement Department of OmniTrans

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 315210
New
DIBBS
Manufacture of Medical-Grade Pajama CoatsThe contract calls for the manufacture and supply of seven men’s full-length, collarless pajama coats constructed from cotton-polyester broadcloth, featuring a snap-front closure and a blue coloration, all designed to meet strict military medical acquisition standards. These garments are intended for use in medical environments under Department of Defense supply chains and must adhere to specified quality, durability, and safety criteria aligned with institutional healthcare requirements. The production must ensure consistent sizing, fabric integrity, and functional fastening to support patient comfort and ease of use in clinical settings. The contract is structured as a subcontract under NAICS code 315210, which pertains to apparel knit manufacturing, and was posted on July 26, 2026, with a response deadline of August 3, 2026. It is managed by the Medical Supply Chain FSH under the Department of Defense, and while no specific place of performance or point of contact is listed, the solicitation is accessible via a DIBBS platform link. Bidders must submit proposals by the deadline to qualify for award, and compliance with military medical standards is non-negotiable, requiring documentation and potential inspection to verify material composition, manufacturing process, and conformity to regulated specifications.
MEDICAL SUPPLY CHAIIN FSH

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 315210
New
International
RFP Tailoring ServicesThis contract is exclusively reserved for Indigenous businesses under the Procurement Strategy for Indigenous Business, seeking tailoring services for military clothing and accessories at the 4 Canadian Division Support Garrison Technical Services Detachment in London, Ontario. The work supports all three branches of the Canadian Armed Forces — Air Force, Army, and Navy — across southwestern Ontario, with services required at the facility located at 701 Oxford Street East. The base contract period is one year, with three additional one-year optional periods available, providing potential for up to four years of service. There are no security clearance requirements for this engagement. The solicitation number is WS5742041011, posted on July 24, 2026, with responses due by July 29, 2026, under NAICS code 315210 for apparel manufacturing. The contract is being managed by the Government of Canada through Public Services and Procurement Canada, with Allison Fernandez serving as the primary contracting authority and point of contact.
Department of Public Works and Government Services

POSTED

5 days ago

DEADLINE

in about 8 hours
View Details
NAICS: 315210
New
SLED
Summer Camp ShirtThe District of Columbia’s Parks and Recreation Department has issued a forecast for a summer camp shirt procurement, with no solicitation number assigned and no set-aside type specified. The opportunity is publicly posted as of July 23, 2026, and details regarding requirements, quantities, or delivery timelines will be outlined in a subsequent statement of work. The place of performance and organizational specifics such as NAICS code, office address, and point of contact are not currently provided, indicating the notice is preliminary. Interested parties should monitor for forthcoming documentation to understand the full scope, compliance obligations, and submission procedures for supplying summer camp shirts to the agency.
Parks and Recreation (DPR)

POSTED

6 days ago

DEADLINE

N/A
View Details
NAICS: 315210
New
SLED
FY26/FRO/DFS CSSU/UniformsThe contract titled FY26/FRO/DFS CSSU/Uniforms is a forecasted procurement issued by the Forensic Sciences division of the District of Columbia, targeting the provision of uniforms for the Crime Scene Unit. Though the solicitation number is not yet assigned and the posting date is listed as July 23, 2026, this forecast indicates an upcoming procurement cycle likely to materialize in the upcoming fiscal year. The requirement is specific to the District of Columbia’s forensic operations, with uniforms to be issued to personnel responsible for crime scene documentation and evidence collection, ensuring they are equipped with standardized, durable, and functionally appropriate attire suited for forensic work environments. No details have been provided regarding the anticipated contract value, delivery timeline, or vendor eligibility criteria, and the point of contact information remains unset. The place of performance is not specified beyond the District of Columbia jurisdiction, and NAICS codes, set-aside classifications, and organizational type details are not yet defined. Potential vendors should monitor the official procurement portal linked for updates as the solicitation progresses toward release.
Forensic Sciences (DFS)

POSTED

6 days ago

DEADLINE

N/A
View Details
NAICS: 315210
New
International
Custom Corporate Apparel Manufacturing and SupplyThe contract entails the end-to-end manufacturing and supply of 36 custom corporate shirts designed for government personnel under the Ministry of National Security of Jamaica. The scope includes all phases of production from fabric cutting and sewing to final quality control and packaging, ensuring compliance with specified corporate standards. This subcontract is classified under NAICS code 315210, which pertains to apparel knit product manufacturing, and is intended to fulfill the uniform needs of government staff with professionally crafted garments. The production must meet exacting standards for fit, durability, and presentation consistent with official government attire requirements. All work is to be performed in accordance with the contractual obligations established by the Government of Jamaica, with no specified place of performance or set-aside provisions detailed in the documentation. The solicitation was posted on July 23, 2026, and interested parties can access further details through the official eProcurement portal of Jamaica. The contract does not include information on delivery timelines, pricing, or payment terms, but the successful vendor must deliver fully finished, inspected, and packaged shirts ready for official issue.
Ministry of National Security

POSTED

6 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → C AND T SUPPLY CHAIN

Same awarding agency

NAICS: 315990
New
DIBBS
BAG, SPECIFIC PURPOSThe contract pertains to a single large-specific purpose bag identified by NSN 8465-01-696-6691 and part number 888564229040, with a quantity of one unit to be delivered within 20 days FOB destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling compliance. Packaging must adhere to DLA-specific standards, requiring each item to be individually labeled with a paper tag made of standard bleached sulfate paper, 100-pound basis weight, featuring a smooth finish suitable for thermal transfer and direct printing. The label must include a 13-digit NSN and a government-assigned 12-digit UPC, both in medium to high density, legible to scanners, clearly visible when the item is folded and packaged, and attached with a fastener without causing damage. For items in plastic bags, Type VII pressure-sensitive labels per MIL-DTL-32075 must be used; for bundled or individual items, Type VIII paper tags are required. Packaging and marking must follow MIL-STD-129, and if non-hazardous, must comply with ASTM D3951 unless overridden by a higher-priority DLA requirement. Palletization and unit pack quantities must align with RP001 DLA packaging guidelines. Inspection is governed by FAR 52.246-2, and MIL-STD-105E is no longer valid; contractors must use MIL-STD-1916 or ANSI/ASQ Z1.4 for sampling. Delivery is to the 8th ESB 2D MLG at Camp Lejeune, North Carolina, and shipments must be sent via traceable freight—parcel post is prohibited. The required delivery date is July 30, 2026, and the contract is under solicitation number SPE1C1-26-T-1561 with a response deadline of August 10, 2026.
Apparel Accessories and Other Apparel Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 315990
New
DIBBS
GLOVES, MEN'S AND WOMENThe contract pertains to the procurement of men’s and women’s gloves meeting the MechaniX MG55 specification sheet under Cage Code 07LZ4, with specific NSNs assigned for each size—small, medium, large, x-large, and xx-large—each paired with a corresponding UPC code for inventory and tracking purposes. No PDMs, FAT, or patterns are required, simplifying compliance and submission processes. Technical and quality requirements referenced under RA001 are sourced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance or award date depending on acquisition size. Packaging must adhere to DLA standards as outlined in RP001, and any non-accepted supplies must have government identification removed per RQ011. The item is covered under defense information protocols as noted in RD003, and the solicitation, identified as SPE1C1-26-T-1563, was posted on July 28, 2026, with a response deadline of August 10, 2026. The contract is managed by the Department of Defense through C and T Supply Chain, with delivery expected within 20 days after order placement at a performance location in Tampa, Florida. The primary point of contact is Ryan Zarkowski, reachable via email and phone listed in the contract data.
Apparel Accessories and Other Apparel Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 424350
New
DIBBS
GLOVES, WELDERS'The contract is for 200 pairs of large, ambidextrous welder’s gauntlet gloves designated by NSN 8415-01-678-0898, with primary part number 5800-L and secondary part number 0851689. The item is being procured under solicitation SPE1C1-26-Q-0299, which was posted on July 28, 2026, and requires responses by August 12, 2026. Delivery must be completed within 60 days after award, with the place of performance specified as Pendergrass, Georgia, ZIP 30567. The procurement is managed by the Department of Defense through C and T Supply Chain, with Vanessa Cirminiello listed as the primary point of contact with the provided email and phone number. The gloves are intended for federal use, with the order originating from purchase request 7014242539, and are to be delivered under the standard commercial terms outlined in the DIBBS RFQ portal.
Clothing and Clothing Accessories Merchant Wholesalers

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 315990
New
DIBBS
LEG IRONSThe contract pertains to the procurement of two pairs of leg irons, identified by NSN 8465-01-446-8616 and part number Model 703 from Peerless Handcuff Co Inc, with a total quantity of two units at a unit price of $2.00, resulting in a total price of $4.00. Delivery is required within five days of contract award under FOB destination terms, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The items must be packaged in full compliance with DLA’s Master List of Technical and Quality Requirements, adhering to MIL-STD-129 for marking and labeling, and palletization must follow RP001 guidelines. If the material is non-hazardous, commercial packaging per ASTM D3951 applies, but only if not superseded by higher-priority DLA requirements. Hazardous material shipments must comply with TQ requirement IP025. Shipping must be conducted via the fastest traceable means, strictly prohibiting parcel post. The delivery address for freight is at GD NASSCO in San Diego, CA, while the parcel post address is designated for administrative use only. Cybersecurity Compliance requires a CMMC Level 2 self-assessment, and the contract includes provisions for Covered Defense Information. The solicitation number is SPE1C1-26-T-1560, with a response deadline of August 10, 2026, and the original required delivery date is July 6, 2026. Point of contact is David Falkowski at DLA, and the contract is issued under the Department of Defense with NAICS code 315990.
Apparel Accessories and Other Apparel Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339993
New
DIBBS
FASTENER TAPE, HOOKThe contract pertains to the procurement of FASTENER TAPE, HOOK with part number 311336C91L and NSN 8315015635893, under solicitation SPE1C1-26-T-1559, issued by the Department of Defense through C AND T SUPPLY CHAIN. A total quantity of 1,210 units is required, to be delivered FOB destination within 106 days, with no variance allowed in quantity. The item must comply with MIL-STD-2073-1E packaging standards and be marked in accordance with MIL-STD-129, with no special marking required. The delivery destination is the Travis Association for the Blind in Austin, Texas, with specific freight shipping addresses provided for logistics coordination. Transportation requirements reference DLAD Proc Notes C19 and C20, and the unit of issue is each, consistent with DLA’s authorized standards. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issuance or award date depending on acquisition scale. Palletization must adhere to DLA Packaging Requirements, and the product is to be packaged using prescribed methods including preservative treatment, with intermediate containers specified. The contract specifies the original required delivery date as October 15, 2025, with the solicitation posted on July 27, 2026, and a response deadline of August 7, 2026. The primary point of contact is Dominik DOS, reachable via email and phone, and the NAICS code 339993 identifies the product category. The item is part of a kit designated for Mine Resistant Ambush Protected (MRAP) applications, emphasizing its defense-critical nature.
Fastener, Button, Needle, and Pin Manufacturing

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 339993
New
DIBBS
LAPEL BUTTON, AWARDThe contract specifies the procurement of 1,000 marine corps civilian award lapel buttons, identified by NSN 8455-01-513-5344, under solicitation SPE1C1-26-Q-0392, with a firm fixed price and zero variance allowed in quantity. Delivery is required within 90 days after contract award, with inspection and acceptance occurring at the destination point. The items must be packaged in accordance with MIL-STD-2073-1E, with each button individually housed in a hinged red velvet box as defined by MIL-DTL-11484/292, then enclosed in a poly sleeve or heat-sealed bag, grouped into batches of 100 in commercial-grade cardboard boxes, and optionally packed into robust shipping containers suitable for protection against corrosion, deterioration, or damage during transit. Marking must follow MIL-STD-129 with no special markings applied. The contractor is required to submit five first-article samples for testing, with written notification of results due within 30 days of receipt by the contracting officer. Quality and technical requirements are governed by the DLA Master List, and MIL-STD-105E is revoked, with MIL-STD-1916 or ANSI/ASQ Z1.4 as recommended alternatives for sampling. Packaging and delivery details align with DLA standards, and the final destination is the Arizona Industries for the Blind in Phoenix, AZ. All supplies are subject to standard inspection under FAR 52.246-2, and covered defense information guidelines may apply.
Fastener, Button, Needle, and Pin Manufacturing

POSTED

2 days ago

DEADLINE

in 2 days
View Details
NAICS: 315990
New
DIBBS
FIELD PACKThe FIELD PACK contract under solicitation SPE1C1-26-T-1558 requires the delivery of one unit of NSN 8465-01-659-9500 with a strict delivery timeline of 20 days FOB destination, and no variance in quantity is permitted. The item must comply with DLA’s Packaging Requirements for Procurement, including individual barcoding using a 13-digit National Stock Number and a corresponding 12-digit Universal Product Code, both of which must be printed on standardized bleached sulfate paper tags with a smooth finish, securely attached via fastener, and fully visible when the item is folded and packaged. Labeling must adhere to MIL-STD-129, and packaging must follow either MIL-DTL-32075 Type VII for plastic bagged items or Type VIII for bundled or standalone items, while hazardous materials must be packaged per Fed-Std-313 and TQ requirement IP025. Non-hazardous items must meet ASTM D3951 unless superseded by DLA’s Master List of Technical and Quality Requirements, which take precedence. Inspection is conducted at destination per FAR 52.246-2, and acceptance occurs at the same point. The contract mandates compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and applies to Covered Defense Information, as noted under RD002. MIL-STD-105E has been canceled and is no longer valid; future references must consider MIL-STD-1916 or ANSI/ASQ Z1.4 for sampling procedures, subject to user evaluation for applicability. All packaging must be palletized according to RP001, and the item must be shipped via traceable freight methods, explicitly prohibiting parcel post. Shipment is directed to the Distribution Management Office at Camp Pendleton, California, with a required delivery date of July 28, 2026, and must be accompanied by the assigned government-controlled tracking reference numbers. The contract is issued under the Department of Defense, with the primary point of contact at DLA Safety and Protection, and all technical requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the official DLA web portal.
Apparel Accessories and Other Apparel Manufacturing

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 541512
New
DIBBS
WAWF Electronic Invoicing and Data SubmissionThe contract requires the submission of electronic invoices and shipping data through the Wide Area Workflow system to facilitate timely payment processing and ensure compliance with government acceptance standards. Participation is limited to subcontractors who must adhere strictly to the electronic data transfer protocols mandated by the Department of Defense through the C and T Supply Chain office, with all documentation routed via the WAWF platform. The place of performance is designated as FPO with ZIP code 96607, indicating operations are tied to military postal destinations, and the North American Industry Classification System code 541512 confirms the scope pertains to computer systems design services supporting defense logistics. The solicitation is open for bids until August 6, 2026, with postings effective from July 26, 2026, leaving a window of approximately two weeks for interested parties to respond. This is classified as a subcontract with no specific set-aside designation, meaning it is open to all eligible subcontractors regardless of business size or ownership status. All communication and submission must occur electronically through the designated DIBBS portal, and failure to comply with WAWF requirements will result in rejection of invoices and delay or denial of payment. There is no designated point of contact listed, so inquiries should be directed through the official portal or associated defense supply chain channels.
Computer Systems Design Services

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 541620
New
DIBBS
Hazard Communication and MSDS Compliance SupportThe contract requires the preparation and submission of comprehensive hazard communication materials for shipped items, including Safety Data Sheets in accordance with global standards and federal disclosures under the Federal Insecticide, Fungicide, and Rodenticide Act and the Federal Food, Drug, and Cosmetic Act. All deliverables must be accurate, fully compliant with regulatory requirements, and tailored to the specific chemical and product contents being transported. The work is being conducted as a subcontract under the North American Industry Classification System code 541620, focused on scientific and technical consulting services. Performance must be completed by the response deadline of August 6, 2026, and the place of performance is designated as FPO with ZIP code 96607, indicating the work may involve logistics or support for military or defense-related shipments. The contracting activity is managed by the Department of Defense through C and T Supply Chain, and compliance with all federal statutes governing hazard communication is critical to fulfilling the obligations of this agreement.
Environmental Consulting Services

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 561910
New
DIBBS
Military Packaging and Preservation ServicesThe contract requires the provision of certified military-grade packaging, preservation, and labeling services for defense-related materials, ensuring full compliance with stringent military standards. This includes dry conditioning to control moisture, preservative treatments to prevent corrosion and degradation, and standardized unit packaging designed for secure handling, storage, and transport under harsh operational conditions. All work must adhere to specified military specifications to maintain equipment integrity through extended storage and deployment cycles. The solicitation is issued under NAICS code 561910 for other support services and is structured as a subcontract under the Department of Defense, managed by C AND T SUPPLY CHAIN. Performance is designated for FPO, zip code 96607, aligning with overseas or expeditionary logistics requirements. Interested parties must submit responses by August 6, 2026, with no set-aside designation applied, meaning open competition is permitted. The opportunity is accessible via the DIBBS portal and demands full certification and documentation to validate compliance throughout the packaging and preservation process.
Packaging and Labeling Services

POSTED

3 days ago

DEADLINE

in 8 days
View Details