Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

GOVERNMENT FIRST ARTIC

Active
SPE7L7-26-T-4670Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of 24 units of a critical gun part identified as a PLATE, SIDE or SIDEPLATE, LEFT HAND, with NSN 1095004508514, under solicitation SPE7L7-26-T-4670, issued as a Service-Disabled Veteran-Owned Small Business Set-Aside. The item must be manufactured in strict conformance to specific technical drawings and specifications, including Basic Drawing NR 98752 64H13218 Revision T and reference drawings dated through 2020, with anodizing per MIL-A-8625 Type II, finish in FED-STD-595 Code 17038 (Gloss Black), and compliance with MIL-PRF-85285. First Article Testing is mandatory and requires two separate exhibits: one assembled for dimensional inspection, including a minimum 150 lb bushing push-out test, and one disassembled for material analysis, to be delivered within 120 calendar days of contract award to Warner Robins ALCMC. Inspection and acceptance occur at the manufacturer’s origin facility by the DCMA QAR, and the supplier’s quality system must meet or exceed SAE AS9003 or ISO 9001 tailored to AS9003 requirements, aligned with tailored higher-level contract quality requirements. Packaging and labeling must follow MIL-STD-129 and DLA’s Master List of Technical and Quality Requirements, with palletization per RP001 and outer containers marked in 2-inch bold red letters as “FIRST ARTICLE” if applicable. The item is subject to export control under ITAR or EAR, requiring prior authorization from the Department of State or Department of Commerce; access to technical data is restricted to contractors with approved JCP certification, completion of DOD export control training, and DLA approval. Cybersecurity compliance requires CMMC Level 2 self-assessment or certified third-party assessment, alongside adherence to NIST SP 800-171 DOD Assessment Requirements under deviation 2026-O0025. All offers must be submitted via DIBBS by the stated deadline and must include accurate identification of the actual manufacturer, DDTC registration, and Safety Data Sheets. Payment and receiving reports must be processed electronically through WAWF. Delivery is FOB Origin to Hill AFB, Utah, with a need

General Info

Procure 24 left-hand plates NSN 0001S00000052 for SDVOSB, deliver in 253 days, CMMC Level 2, ITAR/EAR controlled.

Agency

Department Of Defense → DEPOT HILLView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, USA

Set-Aside

SDVOSBC

Documents

(1)

RFQ SPE7L7-26-T-4670 for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DEPOT HILL
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → DEPOT HILL
View Agency Profile
Office AddressUSA
Contacts
Charles Duncan
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PLATE,SIDE
SIDEPLATE, LEFT HAND
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD001: DEMILITARIZATION: SMALL ARMS WEAPONS AND PARTS AND ACCESSORIES
(CATEGORY I MUNITIONS LIST ITEMS, CATEGORY I-DODM 4160.28-VOL.3)
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United
SPE7L7-26-T-4670
SECTION B
States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 0001S00000052 Quantity: 24 EA Purchase Request: 7016887831QTY - See Solicitation Delivery: 253 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
Federal
Shotover ARS Airborne Surveillance mapping system - 2026-SG-0024The contract pertains to the Shotover Augmented Reality Mapping system designed for airborne surveillance, currently deployed alongside DEA airborne imaging systems. This advanced system enhances situational awareness by overlaying critical mission information such as street names, addresses, parcel data, business names, and landmarks directly onto live video feeds. It serves to bolster ground-based enforcement by providing recorded video evidence, improving the efficacy and precision of surveillance operations. Issued by the Drug Enforcement Administration under the Department of Justice, this contract is identified as "Shotover ARS Airborne Surveillance mapping system - 2026-SG-0024" and falls under the NAICS code 336413. Although certain logistical details such as solicitation number and exact place of performance are not specified, the contract emphasizes support for small businesses through a dedicated point of contact within the DEA Small Business Program. The system’s deployment indicates an ongoing effort to integrate cutting-edge technology into law enforcement surveillance capabilities.
Drug Enforcement Administration

POSTED

about 17 hours ago

DEADLINE

N/A
View Details
NAICS: 336413
New
DIBBS
Supply of Cross-Tube Component (NSN 1560-LL-NC0-1153)The contract seeks the manufacture or supply of two units of a cross-tube component identified by part number 205-030-104-005 and national stock number 1560-LL-NC0-1153, to meet the technical specifications established by Bell Textron and the Defense Logistics Agency. The component is critical for defense applications and must adhere to exacting quality and performance standards set by these entities. The place of performance is designated as Cherry Point, North Carolina, with a zip code of 28533-0021, indicating the operational location where the delivered parts will be managed or integrated. The contract is classified as a subcontract under NAICS code 336413, which corresponds to aircraft parts and auxiliary equipment manufacturing. The solicitation was posted on August 10, 2026, with a firm response deadline of August 18, 2026, giving potential suppliers a limited window of eight days to submit proposals. The responsible agency is the DLA Fleet Readiness Center under the Department of Defense, which oversees logistics and maintenance support for military equipment. Although no specific point of contact or set-aside details are provided, the procurement is part of the broader DLA procurement system, managed through the DIBBS platform, and interested parties must access the official UI link to obtain full submission requirements and technical documentation. Timely and compliant responses are essential to meet operational readiness timelines.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
GEARBOX ADJMNT ASSM
Solicitation # SPE4A0-26-T-4240
The contract pertains to the procurement of a Gearbox Adjustment Assembly identified by NSN 1680-01-561-6410 and part number 706E017-1, with a single unit quantity requiring delivery within five days FOB destination. The item is classified as a Critical Application Item and must comply with stringent DLA technical and quality requirements incorporated by reference from the DLA Master List, which supersedes any other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and labeling specifications strictly enforced. Sampling procedures must follow MIL-STD-1916 or an approved zero-based plan, with acceptance criteria mandating zero non-conformances unless otherwise defined, and attribute classifications must align with predefined verification levels or AQLs. The supplier must implement CMMC Level 2 Cybersecurity Self-Assessment and ensure physical identification markings per RQ017. Delivery is directed to a military facility in Iwakuni, Japan, with government-only shipping instructions and tracking identifiers. The item is not subject to Unit Unique Identification, per DFARS 252.211-7003(c)(1)(i), and the original required delivery date is August 3, 2026, with a solicitation response deadline of August 18, 2026.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
STRAP, METALLIC
Solicitation # SPE4A5-26-T-338Y
The contract is for a single metallic strap, identified by NSN 1650-01-254-9912 and part number 2733127-084, supplied by Parker-Hannifin Corporation under solicitation SPE4A5-26-T-338Y. The item must comply with DLA packaging requirements and technical specifications referenced from the DLA Master List of Technical and Quality Requirements, with sampling procedures governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances unless otherwise stated. Attributes are assigned verification levels or AQLs based on criticality, and unstated features are treated as major. The strap must be marked per MIL-STD-129 with no special markings, packed in accordance with MIL-STD-2073-1E using method 10 for preservation, and palletized per DLA guidelines. Delivery is required within 20 days to the Taiwan Army at Zuoying Ammunition Sub in Kaohsiung, with FOB origin terms and no variance allowed in quantity. The contract specifies origin as both inspection and acceptance point, with freight forwarding governed by DLA procedural notes. The unit of issue is each, with a total price of $1.00 for one unit, and the required delivery date is August 13, 2026. The item falls under NAICS code 336413 and is procured by the Department of Defense’s ASC Supplier Oper OEM Division, with primary point of contact Courtney Minor. The solicitation was posted on August 10, 2026, with a response deadline of August 18, 2026. Government use identifiers and logistics codes are included for tracking and distribution purposes, and all documentation must align with DLA’s authorized unit of issue standards as defined in their official reference file.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
PULLEY, GROOVE
Solicitation # SPE7M4-26-T-329Q
The contract is for the procurement of pulleys with grooves, identified by NSN 3020002771119 and part number MS20219-4, under solicitation SPE7M4-26-T-329Q, which is set aside for Women-Owned Small Businesses. The item is classified as a commercial item and must comply with MIL-DTL-7034F(2), including technical and quality requirements from the DLA Master List, which supersede other standards like ASTM D3951. The pulley is designated as a critical application item, requiring adherence to specific Technical Data Packages and Quality Assurance Provisions including QAP-106. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional components such as batteries, sensors, or instruments, with additional containment requirements for portable items containing mercury as per NAVSEA 5100-003D. The qualified products list applies, mandating that only qualified manufacturers may supply this item. The contract includes three line items totaling 1,652 units, each requiring delivery within 50 days under FOB origin terms with no variance allowed in quantity. Packaging must follow ASTM D3951 while fully complying with MIL-STD-129 labeling and DLA’s RP001 packaging requirements, including palletization standards. Each shipment must be directed to designated DLA distribution depots at Hill AFB, Robins AFB, and Tinker AFB, with specific need ship and required delivery dates ranging from October 2026 to February 2027. Inspection and acceptance occur at the destination, and all units must be properly marked, labeled, and palletized per contract specifications. The primary point of contact is Blake Tushar of the Fluid Handling Division, Department of Defense, and the solicitation was issued under NAICS code 336413 with a response deadline in August 2026.
FLUID HANDLING DIVISION

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336413
New
DIBBS
FORMER, AIRCRAFT
Solicitation # SPE4A6-26-T-14VJ
This contract pertains to the procurement of two former aircraft items identified by NSN 1560-01-152-8483, with delivery required within 109 days after award. The solicitation number is SPE4A6-26-T-14VJ, issued by the Defense Logistics Agency under the ASC Commodities Division of the Department of Defense, with performance located at Tinker AFB, OK. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition type. Strict compliance is mandated for documentation, packaging, and export control procedures, including adherence to DFARS clauses addressing the handling of controlled technical data subject to ITAR or EAR. Export of technical data is restricted to contractors holding approved US/Canada Joint Certification Program status, having completed required DLA training and questionnaires, and receiving explicit authorization. The item is exempt from Unique Item Identification per customer request, with DFARS 252.211-7003(c)(1)(i) applicable. Configuration changes require formal Engineering Change Proposal review, and inspection and acceptance must occur at origin. All supplies must be properly marked for physical identification, and government identification must be removed from rejected items. Cybersecurity compliance at CMMC Level 2 through a certified third-party assessment organization is enforced, and defense information protections apply under RD002.
ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
PULLEY, GROOVE
Solicitation # SPE7M4-26-T-328R
The contract calls for the procurement of 2,405 Pulley, Groove units identified by NSN 3020002771123, designated as a critical application item and classified as a commercial item. The part must conform to MS20220-2 and be manufactured in strict compliance with MIL-DTL-7034/2B, MIL-DTL-7034/1B, and MIL-DTL-7034F(2) specifications, excluding revision 3, as well as referenced drawing 98752 200415485 and applicable general engineering notes 1, 3, and 12. The item is subject to the Qualified Products List or Qualified Manufacturers List, requiring manufacturer qualification prior to award. Technical and quality requirements from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, take precedence over all other standards. Sampling must follow MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and III or AQLs of 0.1, 1.0, and 4.0, respectively; unspecified attributes default to major. All items must be packaged per ASTM D3951, but DLA requirements override this standard; palletization must adhere to RP001, and all packaging must be marked and labeled in accordance with MIL-STD-129, including specific labeling for hazardous materials under 29 CFR 1910.1200 and radioactive materials exceeding defined thresholds. The contract mandates full compliance with DFARS and FAR clauses regarding cybersecurity, including NIST SP 800-171 assessment requirements, safeguarding covered defense information, and prohibitions on hexavalent chromium, covered telecommunications equipment, and communist Chinese military company items. The item is to be delivered FOB Origin to Tinker AFB, Oklahoma, with inspection and acceptance occurring at destination after a 164-day delivery window. Payment must be submitted electronically via WAWF, with strict adherence to electronic invoicing and receiving report protocols. The solicitation is a HUBZone set-aside requiring offerors to submit representations on small business, WOSB, and HUBZone status, and to certify compliance with whistleblower rights, anti-trafficking,
FLUID HANDLING DIVISION

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336413
New
DIBBS
COIL ASSEMBLY, EXCHA
Solicitation # SPE4A6-26-T-14VT
The contract pertains to the procurement of a single coil assembly for an exchanger with NSN and part number 1650-01-020-8681, under solicitation SPE4A6-26-T-14VT, with a response deadline of August 18, 2026, and a delivery requirement of 20 days after order. This is a total small business set-aside under NAICS code 336413, managed by the Department of Defense’s ASC Commodities Division. The item is subject to stringent export control regulations under ITAR or EAR, meaning any handling, disclosure, or transmission of associated technical data to foreign persons—regardless of location—requires prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs the protection of this data, and distribution is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program designation, have completed mandatory DOD export control training, and have been formally authorized by DLA. Additionally, the winning contractor must be a Cybersecurity Maturity Model Certification Level 2 certified third-party assessment organization and must ensure physical identification and bare item marking compliance to meet all contractual requirements.
ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
COUNTER AND CHUTE A
Solicitation # SPE8EF-26-T-1610
The contract is for the procurement of two units of a Counter and Chute Assembly identified by NSN 1730-01-082-4002 under solicitation SPE8EF-26-T-1610, with a total delivery timeline of 52 days after order. The acquisition is a Total Small Business Set-Aside under FAR 19.5, restricted to small business entities, and classified under NAICS code 336413 for defense equipment manufacturing. The item involves technical data subject to export controls under either ITAR or EAR, requiring strict compliance with DFARS 252.225-7048; disclosure to foreign persons, including foreign nationals in the U.S. or abroad, is prohibited without prior authorization from the Department of State or Commerce. Access to this technical data is restricted to contractors with approved US/Canada Joint Certification Program credentials, completion of mandatory DOD export training, and formal approval from DLA. Packaging must meet DLA procurement standards, and non-accepted supplies must have all government identification removed. The contract requires CMMC Level 2 certification for any third-party assessment organization involved, and technical and quality requirements referenced are governed by the DLA Master List as of the solicitation or award date depending on acquisition size. Delivery is targeted to New Cumberland, Pennsylvania, with Shannon Anderson at DLA as the primary point of contact for inquiries.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336413
New
DIBBS
BRACKET ASSY, CYLIND
Solicitation # SPE4A7-26-T-637H
The contract solicitation SPE4A7-26-T-637H requires the procurement of six units of a BRACKET ASSY, CYLIND with NSN 1680-00-465-9457, to be delivered FOB ORIGIN within 102 days of contract award, with a required delivery date of November 4, 2027. The item is classified as a critical application item and must be manufactured by AVOX SYSTEMS INC under part number 800579-01. Sampling and inspection are governed by strict quality standards: MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based sampling plan must be used, with unspecified attributes deemed major. Inspection and acceptance occur at origin, and the manufacturer’s inspection system must comply minimally with SAE AS9003 or ISO 9001 tailored to AS9003 standards. Acceptance requires zero non-conformances in the sample lot, and verification levels for critical, major, and minor attributes are fixed at VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. Packaging must adhere to ASTM D3951, but DLA Master List requirements take precedence, and all packaging and labeling must conform to MIL-STD-129. Palletization follows RP001: DLA Packaging Requirements for Procurement. The contractor is required to complete a CMMC Level 2 self-assessment, safeguard covered defense information under FAR 252.204-7012, and comply with NIST SP 800-171 DOD assessment requirements. The Berry Amendment and Buy American Act apply with a $150,000 threshold, and non-domestic material disclosures are mandatory. Safety Data Sheets meeting 29 CFR 1910.1200(g) and Federal Standard No. 313 must be submitted prior to award, and hexavalent chromium is prohibited. The contractor must register in DLA’s AMPS system to access the Vendor Shipment Module and comply with all DLA procurement directives. The contract includes provisions on whistleblower rights, disclosure of information, cybersecurity incident reporting, electronic invoicing via WAWF, and restrictions on mandatory arbitration and acquisition of prohibited telecommunications equipment. Quotes must be
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
CAP ASSEMBLY, FILLER, VE
Solicitation # SPE8EF-26-T-1611
The contract specifies the procurement of two units of a miniature vented cap assembly, identified by NSN 1730-01-131-4493 and part number 7M710-1 from The Boeing Company and FCS-M from Lenz Inc, with a total value of $2.00 per unit. Delivery is required within 20 days from the contract award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, including specified preservation methods, wrapping, and unit container standards. Marking must follow MIL-STD-129 with no special marking codes applied, and palletization must adhere to DLA guidelines. The final delivery destination is RAF Lakenheath, Building 1035, Suffolk, United Kingdom, with the same address used for freight shipping and marking. Transportation details reference DLAD Proc Notes C19 and C20. Technical and quality requirements are incorporated by reference from the DLA Master List, and the contract is subject to defense information handling protocols. The solicitation number is SPE8EF-26-T-1611, with a response deadline of August 21, 2026, and the original required delivery date is August 12, 2026. The contract falls under NAICS code 336413 and is authorized by the Department of Defense.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336413
New
DIBBS
BOLT ASSY, HYDRAULIC
Solicitation # SPE4A7-26-T-637Z
The contract pertains to the procurement of two hydraulic bolt assemblies with part number ABC6094 and NSN 1650-00-549-3578, sourced from MONOGRAM AEROSPACE FASTENERS with CAGE code 98524. Delivery is required within 20 days after order date, with the solicitation issued under SPE4A7-26-T-637Z and a response deadline of August 18, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, subject to amendments. Comprehensive documentation is mandated, including a Source Approval Request with full data packages for both approved and alternate parts, since no existing data is available. Quality assurance is enforced through tailored higher-level requirements, inspection and acceptance at origin, and mandatory removal of government identification from non-accepted items. Physical marking of bare items is required, along with compliance to DLA packaging standards and Cybersecurity Maturity Model Certification Level 2 self-assessment. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted, unless otherwise specified, with attributes classified per critical, major, or minor designations corresponding to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0. Measuring and test equipment must be properly calibrated and documented. The contract enforces Covered Defense Information security protocols and is managed by the Department of Defense through the ASC Supplier Oper AE and AF Division, with primary point of contact provided for inquiries.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → DEPOT HILL

Same awarding agency

NAICS: 336412
New
DIBBS
INSULATION BLANKET,
Solicitation # SPE8E6-26-T-4180
This contract pertains to the procurement of two insulation blankets identified by NSN 5640-01-006-3265 and part number 160D955420-30 under solicitation SPE8E6-26-T-4180, issued by the Defense Logistics Agency for delivery to Hill Air Force Base. The items must be manufactured and packaged in strict compliance with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 packaging requirements, with hazardous material handled per FED-STD-313 and TQ requirement IP025. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned specific verification levels or AQLs; all deliveries are subject to zero non-conformances unless otherwise stated. The contract mandates CMMC Level 2 self-assessment compliance and prohibits intentional introduction of mercury or mercury-containing compounds except in exempted applications such as batteries, fluorescent lamps, and specified instruments, which must include a secondary containment boundary per NAVSEA 5100-003D. Delivery is due within 163 days from the contract award with FOB origin terms, a fixed quantity of two units with zero tolerance for variance, and final inspection and acceptance occurring at the destination. The required delivery date is May 2, 2028, with a need ship date of February 1, 2027, and all documentation must reflect the correct unit of issue and quantity per unit pack as specified.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
New
DIBBS
Unable to decompose sub-opportunities

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 488999
New
DIBBS
Hazardous Materials Handling and Transportation Compliance
All Other Support Activities for Transportation

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 541330
New
DIBBS
Source Inspection and Quality Assurance Services
Engineering Services

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging and Labeling
Other Warehousing and Storage

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 326113
New
DIBBS
Precision Plastic Sheet Fabrication
Unlaminated Plastics Film and Sheet (except Packaging) Manufacturing

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 488310
New
DIBBS
International Shipping & U.S.-Flag Vessel ComplianceThe contract requires the management of international shipments using U.S.-flag vessels, or the preparation of waiver documentation that includes verifiable proof of efforts to secure such vessels. All shipments must be accompanied by an ocean bill of lading, which must be submitted no later than 30 days after the shipment date. Compliance with U.S.-flag vessel requirements is central to the obligation, and any deviation must be formally justified and documented. The work is performed under a subcontract type with a North American Industry Classification System code of 488310, indicating a focus on freight transportation arrangement services. The place of performance is designated as Hill AFB, Utah, with the agency responsible being the Department of Defense through its Depo Hill office. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026.
Port and Harbor Operations

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Handling & LabelingThe contract pertains to the classification, labeling, and documentation of hazardous materials in full compliance with OSHA’s Hazard Communication Standard, requiring the accurate generation of hazard warning labels and material safety data sheets. The work involves ensuring all chemical substances are properly identified, labeled, and documented to meet federal safety and regulatory requirements, with an emphasis on clarity, consistency, and regulatory adherence. This is a subcontract under NAICS code 541690, issued by the Department of Defense under the agency name DEPOT HILL, with the performance location specified as Hill Air Force Base, Utah, zip code 84056-5734. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with no set-aside classification indicated. All work must be executed in alignment with established government safety protocols and documented thoroughly to support ongoing compliance and operational safety at the designated military facility.
Other Scientific and Technical Consulting Services

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 541380
New
DIBBS
Compliance & Certification Documentation SupportThe contract requires the preparation and submission of critical compliance documentation for defense-related deliverables, including the Certificate of Quality Compliance, Material Safety Data Sheet (MSDS), and metal certification (CDRL-METALSCERT), ensuring all materials meet rigorous military standards. This subcontract is issued under the NAICS code 541380 and is associated with the Department of Defense, specifically managed by the agency named DEPOT HILL, with performance requirements centered at Hill Air Force Base, zip code 84056-5734. The solicitation was posted on August 5, 2026, and responses must be submitted by August 17, 2026, to meet the deadline for consideration. The focus is entirely on generating accurate, complete, and timely documentation to verify material integrity and regulatory adherence for defense procurement, with no explicit set-aside specifications provided. All deliverables must align with Department of Defense compliance frameworks and be tailored to the specific CDRL requirements outlined in the contract. The submission must be coordinated through the designated DIBBS platform, and while no point of contact is listed, bidders are expected to follow official procurement channels to ensure proper handling and acceptance of all compliance materials.
Testing Laboratories and Services

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 332112
New
DIBBS
Aluminum Alloy Structural Angle SupplierThe contract calls for the supply of 52 feet of structural aluminum alloy angle stock, with a tolerance of ±10%, made from 2024/T-8511 alloy, measuring 0.500 inches in height, 0.750 inches in width, and 0.063 inches in thickness, delivered in 10 to 12 foot lengths. The material must fully comply with the SAE AMS-QQ-A-200C specification and include mill certification to verify composition, mechanical properties, and heat treatment. This requirement is part of a subcontract under the NAICS code 332112, specifically for specialized metal product manufacturing. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and the performance location is established at Hill Air Force Base, Utah, with the zip code 84056-5734. The contracting entity is the Department of Defense through the agency name DEPOT HILL, indicating this procurement supports military or defense infrastructure needs with strict material integrity standards.
Nonferrous Forging

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 326220
New
DIBBS
Nonmetallic Hose Supply and DeliveryThe contract calls for the supply and delivery of four units of nonmetallic hose designated by NSN 4210016132630, adhering strictly to military packaging, labeling, and hazardous materials reporting requirements to ensure compliance with defense logistics standards. The procurement is under the NAICS code 326220, indicating it relates to plastic pipe and pipe fitting manufacturing, and is structured as a subcontract with no set-aside provisions applied. Performance is mandated at Hill Air Force Base, with the delivery address specified as 84056-5734. The solicitation was posted on August 5, 2026, and responses must be submitted by August 17, 2026, providing a twelve-day window for potential vendors to prepare and submit proposals. The ordering activity is listed as DEPOT HILL under the Department of Defense, and the contract details are accessible via the DIBBS system through the provided link.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance (NIST SP 800-171)
Computer Systems Design Services

POSTED

6 days ago

DEADLINE

in 6 days
View Details