This Solicitation opportunity from Government of Canada was posted on February 27, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Guidance for Prefabricated and Modular Construction Addressing Northern and Arctic Requirements

Closed

ACAN-2026-02International

Submission Closed03/14/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541330

New

SLED

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services through an Indefinite Delivery/Indefinite Quantity (IDIQ) contract to support a range of major construction projects across its facilities. These services will span the full lifecycle of projects including planning, design, construction, and closeout phases, with a focus on Design Build, Progressive Design Build, and alternative delivery methods. The contractor will be responsible for ensuring that all projects adhere to approved schedules, budgets, and quality standards while coordinating with Port staff and stakeholders to deliver complex infrastructure initiatives efficiently and effectively. The contract will serve as the primary mechanism for securing CM expertise across multiple future projects without specifying individual task orders at this time. The solicitation is classified under NAICS code 541330 for Architectural, Engineering, and Related Services and is managed by the Port’s Construction Management division. Primary point of contact for inquiries is Hala Rabbo, with additional support available from Project Manager Ann Davidson. The contract is forecasted for release in July 2026, though no formal solicitation number or set-aside details have been published. Performance will occur at various Port of Seattle locations, and interested firms are encouraged to monitor the official Port portal for official posting and submission guidelines. All contractors must demonstrate proven experience in managing large-scale public construction projects under similar delivery models.

Construction Management

POSTED

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, operating within a continuous 24/7/365 environment. The focus is on identifying and correcting performance deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance efficiency, reliability, comfort, and longevity while ensuring compliance with safety and regulatory standards. All work will be executed under Service Directives and executed in close coordination with Aviation Facilities and Infrastructure to meet agreed-upon deliverables. The contract is structured as an IDIQ vehicle under NAICS code 541330 and is managed by the Port of Seattle’s Aviation Facilities and Infrastructure division. Point of contact for inquiries and coordination includes Jason Gates as the primary liaison and Jim Farris as the project manager, with all communication and administrative details centered through the Port of Seattle’s official procurement portal. The solicitation was posted in July 2026 and is intended to establish a framework for ongoing support services critical to maintaining the airport’s complex operational systems.

Aviation Facilities & Infrastructure

POSTED

DEADLINE

Mechanical, Electrical, and Plumbing (MEP) EngineeringThe contract seeks qualified firms to design mechanical, electrical, plumbing, and fire protection systems for public buildings under a subcontract arrangement, classified under NAICS code 541330 for architectural and engineering services. The solicitation was posted on July 25, 2026, with a response deadline set for September 7, 2026, and is being managed by the State of Utah, though no specific city or office address is provided. Scope of work includes comprehensive MEP system design for public infrastructure projects, requiring technical expertise in integrated building systems to meet safety, efficiency, and code compliance standards. While no set-aside provisions or point of contact details are listed, interested parties must submit proposals through the designated online portal by the stated deadline.

POSTED

DEADLINE

Structural Engineering ServicesThe contract titled Structural Engineering Services seeks qualified providers to perform structural analysis and design for buildings and structures, with specific emphasis on foundation systems and seismic evaluations to ensure compliance with safety and resilience standards. Work is expected to involve detailed engineering assessments, modeling, and documentation to support the integrity and durability of constructed facilities under dynamic and environmental loads. The opportunity is categorized as a subcontract and was posted on July 25, 2026, with responses due by September 7, 2026, and is governed under NAICS Code 541330 for architectural and engineering services. All performance obligations are tied to the state of Utah, though no specific city or address is provided, and the contracting entity is identified as the Utah state agency without further organizational subdivision or point of contact details listed.

POSTED

DEADLINE

BD26-XX Pre-Qualified Design Professional Services Pre-Qualified Vendor ListThe State of Utah Division of Purchasing is seeking statements of qualifications from design professionals to establish a pre-qualified vendor list for architectural and engineering services, under the solicitation number BD26-XX. This open-ended list will remain active for twelve months from the date of approval, after which vendors must resubmit their qualifications for renewal. The State reserves the right to reopen the solicitation at any time, though not more frequently than once every twelve months, to accommodate additional qualified vendors or adjust criteria as needed. The posting date is July 25, 2026, with responses due by September 7, 2026, and all selections will be managed through the state’s procurement platform. Interested firms must submit their credentials to be considered for inclusion, which does not guarantee work but enables eligibility for future project assignments. The point of contact for this solicitation is Brayden Dent, reachable via email at braydend@utah.gov, and all submissions must be made through the official online portal at the provided UI link. The procurement is not subject to any specific set-aside classifications and applies across the State of Utah with no designated city or zip code for performance, meaning services may be required anywhere within the state. Vendors are expected to demonstrate relevant experience, expertise, and capability in design services appropriate for public sector projects. Approval does not constitute a contract or commitment to award work but allows the State to directly engage pre-qualified firms as needs arise, streamlining the selection process for time-sensitive or recurring design projects.

POSTED

DEADLINE

Quality Assurance and Sampling Inspection ServicesThis contract requires the performance of quality assurance and sampling inspection services under MIL-STD-1916 or ASQ H1331 Table 1, with a strict zero tolerance policy for any non-conformances on critical, major, and minor attributes. The work involves rigorous inspection protocols to ensure every product meets exacting standards without exception, targeting high-stakes components where even minor deviations are unacceptable. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond, reinforcing the intent to support small business participation in defense-related quality initiatives. The NAICS code 541330 indicates the primary focus is on scientific and technical consulting services, specifically quality control and inspection activities, and the contracting activity is under the ASC Commodities Division of the Department of Defense. The opportunity was posted on July 25, 2026, with a response deadline of August 8, 2026, providing a two-week window for qualified small businesses to submit proposals. While no specific place of performance or point of contact is detailed in the provided data, the work is tied to a Defense Logistics Agency procurement platform, suggesting inspections will support the broader DOD supply chain. The absence of an office address or zip code implies that the location of performance may be flexible or determined by the nature of the subcontracted materials being inspected, potentially across multiple facilities or contractor sites under the DOD’s control. The requirement underscores the critical importance of precision and compliance in defense-related quality assurance, where failure to meet zero tolerance standards could compromise operational readiness and safety.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply Chain Traceability & Quality Documentation ServicesThe contract requires comprehensive documentation and recordkeeping services to ensure end-to-end supply chain traceability in alignment with DLA quality standards, focusing on full visibility and accountability across all procurement and logistics activities. All work must adhere to the specified compliance framework to support audit readiness and operational integrity, with deliverables designed to validate the provenance and integrity of materials throughout the supply chain. This subcontract falls under NAICS code 541330 and is managed by the ASC Commodities Division within the Department of Defense, with responses due by July 31, 2026. The place of performance and point of contact details are not specified, but performance is expected to support DLA’s broader mission of maintaining rigorous quality control across defense supply networks.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Inspection, Testing, and Quality Assurance ServicesThe contract requires the performance of technical inspection and testing on newly manufactured compressor ducts at both their origin and destination locations to verify full compliance with established engineering and qualification standards. This work is critical to ensuring that each duct meets stringent performance, safety, and reliability criteria before being accepted for use in defense-related systems. The scope is focused on quality assurance through rigorous testing protocols and documentation, with an emphasis on traceability and adherence to technical specifications throughout the supply chain. This is a subcontract under the NAICS code 541330 for engineering services, issued by the Department of Defense through the Ok DLA Aviation office in Oklahoma City. The solicitation was posted on July 25, 2026, with a response deadline of August 25, 2026. While specific location details for performance are not provided, the work must be conducted at manufacturing sites and final delivery points to cover the full lifecycle of the components. There is no set-aside designation, indicating this opportunity is open to all eligible contractors, and the successful bidder will be responsible for delivering comprehensive inspection reports and test data to confirm regulatory compliance.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

On-Site Security System Testing & Compliance VerificationThe contract titled On-Site Security System Testing & Compliance Verification requires the performance of scheduled functional testing on security alarm components to ensure operational integrity and adherence to federal standards. Tasks include verifying system functionality, documenting test results, and providing support necessary for annual certification. All work must be conducted on-site at the specified location in Salem, with a zip code of 01970, and must meet rigorous compliance benchmarks tied to federal requirements for security systems. The contractor is expected to deliver thorough and accurate records to facilitate regulatory certification. This is a subcontract under NAICS code 541330, posted by the Department of the Interior through its office Ner Services Mabo (43000). The solicitation opened on July 25, 2026, with a deadline for responses set for August 7, 2026, at 2:00 PM. No set-aside classification is designated, and the contract is not associated with a specific point of contact or additional office address beyond the place of performance. All work must be completed in accordance with the stated federal compliance framework and submitted for certification purposes within the contractual obligations.

Ner Services Mabo (43000)

POSTED

DEADLINE

Generator Condition Assessment & ReportingThe contract requires comprehensive assessments of generator systems to ensure operational readiness and compliance, encompassing load bank testing to verify performance under simulated full-demand conditions, emissions evaluations to meet environmental standards, and detailed fuel quality analyses to detect contamination or degradation that could compromise system reliability. All findings and test results must be compiled into formal technical reports and submitted electronically via email, with copies retained for audit purposes to support accountability and regulatory compliance. The work is scoped as a subcontract under NAICS code 541330, which pertains to engineering services, and is issued by the Texas Department of Public Safety with a response deadline of August 14, 2026. The assessment activities are critical for maintaining emergency power infrastructure and must be performed to a high standard of technical accuracy and documentation rigor.

Department of Public Safety

POSTED

DEADLINE

Diagnostic and Troubleshooting Services for Water Treatment EquipmentThe contract awards services to perform up to three diagnostic evaluations aimed at identifying malfunctions within a water treatment system. Each evaluation includes comprehensive testing, root cause analysis, and detailed reporting to ensure accurate identification and documentation of system failures. The work is focused on ensuring operational integrity and compliance with water treatment standards, with all activities to be conducted at a designated location in Fresno. This is a subcontract under the NAICS code 541330, categorized as a professional, scientific, and technical service. The solicitation was posted on July 25, 2026, with responses due by August 11, 2026, at 10:00 PM Pacific Time. The contracting agency is the California Department of Fish & Wildlife, operating under the state of California, and the work is intended to support water infrastructure reliability within the state’s environmental management framework.

California Department of Fish & Wildlife

POSTED

DEADLINE

MEP Engineering ServicesTexas Southern University is seeking qualified subcontractors to provide MEP engineering services for the design and integration of HVAC, electrical, plumbing, and fire alarm systems within renovated study rooms. The project requires seamless coordination across all disciplines to ensure functional, code-compliant, and efficient building systems that support the academic environment. The contract is open for responses until August 18, 2026, with work to be performed on campus at the university’s location. The solicitation falls under NAICS code 541330, classifying it as architectural and engineering services, and is structured as a subcontract opportunity through the Texas SmartBuy procurement portal. Bidders must demonstrate expertise in multi-system integration and experience with institutional facility upgrades, though no specific set-aside provisions apply. All proposals must align with the university’s operational standards and technical requirements for renovated study spaces.

Texas Southern University

POSTED

2 days ago

DEADLINE

in 23 days

AI Contract Overview

The contract involves the development of a supplemental plain language user guide focused on prefabricated and modular construction tailored specifically for northern and Arctic conditions. This guide will be integrated with the existing standards framework established by the CSA modular standards, and will include adaptations addressing the unique climate resilience and environmental challenges of northern regions. The goal is to provide practical, step-by-step guidance to users by adapting content from current modular and manufactured standards, ensuring relevance and usability for construction in challenging northern environments. The project falls under the Standards Council of Canada (SCC) and is part of their Northern Infrastructure Standardization Initiative, with input from the Northern Advisory Committee to ensure regional appropriateness and technical accuracy. The contract was posted in late February 2026, with a response deadline in mid-March 2026. It is a federal solicitation managed by the SCC, aiming to enhance safety, efficiency, and standardization for modular construction projects in northern Canada. The primary contact for the contract is David LaBerge, the SCC Contracting Authority.

General Info

Develop supplemental user guide for northern modular construction under CSA standards, led by SCC.

Agency

Government of Canada → Standards Council of Canada (SCC-CCN)View Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Canada, CAN

Set-Aside

NONE

Documents

(2)

SCC_ACAN-2026-02 Modular Buildings Pre-Solicitation Notice

PDF•5 pages•presolicitation

Advance Contract Award Notice (ACAN) 2026-02 for Modular Construction Guide

PDF•5 pages•advance-contract-award-notice

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedFeb 27

Solicitation

Response DeadlineMar 14

Deadline has passed

Submission Closed

03/14/2026, 09:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Standards Council of Canada (SCC-CCN)

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → Standards Council of Canada (SCC-CCN)

View Agency Profile

Office AddressN/A

Contacts

David LaBergeContracting Authority

contact@example.gov

+1 (555) 000-0000

Full Description

Guidance for prefabricated and modular construction addressing northern and Arctic requirements (integrated with existing CSA modular standards framework) as described below; Standards Council of Canada requires the development of a supplemental plain language user guide for prefabricated and modular construction in northern and Arctic applications. The guide will be developed using content adapted from existing Group’s modular/manufactured standards, incorporating northern and climate-resilience provisions and will provide practical “how to” direction for users. The work will also incorporate input from the Northern Advisory Committee (NAC) under SCC’s Northern Infrastructure Standardization Initiative