Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Guralp seismic sensor equipment

Active
80NSSC26937181QFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Vendors must submit a bid for Guralp seismic sensor equipment referencing solicitation number 80NSSC26937181Q with the CAGE/UEI code, FOB destination, lead time for delivery, and point of contact name and email included in their response. All inquiries must be submitted no later than day three of the posting, and quotes must be sent via email with the RFQ notice ID clearly stated in the subject line. Payment will not be made via credit card. The opportunity is issued by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, with the office located at Stennis Space Center, Mississippi, 39529. The response deadline is August 5, 2026, at 1:00 PM EST, and no set-aside provisions apply to this combined solicitation under NAICS code 334519. Primary point of contact is Monica Wilson at monica.d.wilson@nasa.gov, with Shari Trigg as the secondary contact at shari.trigg@nasa.gov.

General Info

NASA seeks sole-source Guralp seismic sensors under FAR 12 for Marshall Space Flight Center, no set-aside, responses due July 17, 2026.

Agency

National Aeronautics And Space Administration → NASA Shared Services CenterView Agency

NAICS

334519 - Other Measuring and Controlling Device ManufacturingView NAICS

Place of Performance

MS

Set-Aside

NONE

Documents

(2)

SATPC0041614+Tab+10+1+SAM+RFQ+OTSB.pdf

PDF

SATPC0041614+Tab+07+2+SOW_Redacted.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseCombined Synopsis
Posted

Solicitation

Type Changed

Solicitation → Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyNational Aeronautics And Space Administration → NASA Shared Services Center
Contacts2 people available
OfficeSTENNIS SPACE CENTER, MS, 39529, USA
Organization / Agency
National Aeronautics And Space Administration → NASA Shared Services Center
View Agency Profile
Office AddressSTENNIS SPACE CENTER, MS, 39529, USA
Contacts
Monica Wilson
contact@example.gov
Shari Trigg
contact@example.gov

Full Description

Show more

PLEASE INCLUDE THE FOLLOWING IN YOUR BID:
•    CAGE/UEI CODE
•    FOB DESTINATION
•    LEADTIME FOR DELIVERY
•    POC NAME & EMAIL 
Questions must be sent no later than day 3 of the posting.


** SEE THE ATTACHMENTS **
We will not be paying with a credit card


VENDORS MUST REFERENCE THE RFQ NOTICE ID NUMBER IN THE SUBJECT LINE OF YOUR EMAIL WHEN SUBMITTING A QUOTE

Similar Contracts

Same NAICS industry code

NAICS: 334519
New
Federal
MLX-VLX MOBILE MAPPING SYSTEMThe solicitation for the MLX-VLX Mobile Mapping System, identified by number SPMYM226Q7827, is issued by DLA Maritime – Puget Sound under the Department of Defense and is posted on SAM.gov. Bids must be submitted via email to TRICIA.WINTERSTEEN@DLA.MIL by the deadline of July 30, 2026, at 5:00 PM Eastern Time and must include a completed and signed solicitation, manufacturer details, country of origin, and lead time for delivery with FOB destination terms. Expedited or earliest possible delivery is strongly requested. The solicitation does not use any set-aside provisions and is classified under NAICS code 334519. Contractors awarded the contract must comply with NIST SP 800-171 cybersecurity requirements unless the item is identified as Commercial Off the Shelf, in which case the exemption must be clearly stated with supporting information provided during the bid submission. Any awardee subject to NIST SP 800-171 must maintain a current assessment dated no more than three years prior to award, unless a shorter period is specified. All responses must be directed to the primary point of contact, Tricia Wintersteen, at the provided email and phone number, with performance taking place in Bremerton, Washington.
DLA Maritime - Puget Sound

POSTED

about 3 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334519
New
DIBBS
Motor Controller Manufacturing and AssemblyThe contract encompasses the full manufacturing, assembly, and testing of a motor controller unit adhering to rigorous military specifications with a zero-defect quality standard and strict configuration control. All work must be performed to ensure absolute reliability and traceability, meeting the demanding environments and performance criteria expected by defense applications. The subcontract is part of the Department of Defense’s Maritime Supply Chain ESOC Buys initiative, with performance required at the facility located in Fife, Washington, 98424-3710. The North American Industry Classification System code 334519 applies, indicating specialized electronic equipment manufacturing. Bidders must submit responses by the deadline of August 10, 2026, following the solicitation issued on July 28, 2026, with all deliverables expected to conform to predefined military technical and quality benchmarks without deviation.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 22 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334519
New
DIBBS
Supply of Radioactive Components (e.g., Gauges, Sensors)The contract pertains to the supply of devices containing regulated radioactive materials, such as ionization smoke detectors and density gauges, which must meet stringent labeling standards set by the Nuclear Regulatory Commission and the Department of Defense. These components are critical for operational safety and measurement functions in military and defense applications, necessitating full compliance with federal radiation safety and transportation regulations. All items must be properly documented, packaged, and labeled to ensure secure handling throughout the supply chain and during deployment. The solicitation, issued under the Defense Logistics Agency of the Department of Defense, is structured as a subcontract with a response deadline of August 10, 2026, and was posted on July 28, 2026. The North American Industry Classification System code 334519 identifies the scope as other electronic component manufacturing, indicating the technical nature of the devices involved. Performance is to be delivered to a military postal address designated as FPO with ZIP code 96616, reflecting the global and often remote nature of DoD operations. Bidders must demonstrate expertise in handling regulated radioactive materials and possess the necessary certifications to meet federal compliance requirements.
Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334519
New
DIBBS
GAGE, PRESSURE, DIAL INDThis contract specifies the procurement of one dial indicating pressure gage, identified by NSN 6685-01-457-1285 and part number 9314652, under solicitation SPE4A6-26-T-10AZ. The item must be delivered within 20 days to a FPO address in the Pacific, with delivery terms set as FOB destination and no variance allowed in quantity. Inspection and acceptance both occur at the destination point, and the product must be packaged in strict compliance with MIL-STD-2073-1E, including packaging code U, preservation method 10, and unit container D3. Marking must follow MIL-STD-129 with a special code 05 indicating it is a delicate instrument, and palletization must adhere to DLA packaging standards. The gage must be free of any intentional addition or direct contact with mercury or mercury-containing compounds, except for specific functional uses such as in calibrated instruments as approved by NAVSEA, and any such instruments must include a secondary containment barrier. All preservation, packaging, and marking materials must also be mercury-free. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with sampling to comply with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise specified. Attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs, and unspecified attributes default to major. The contract prohibits mercury in any packaging or preservation materials, and shipment must follow DLAD procedure notes for vessel and first destination transportation. The supplier must comply with all DLA requirements including unit of issue alignment via the official ANSI X12 reference, and delivery must meet the original required date of July 20, 2026. The point of contact for contract inquiries is Briana Covington of the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
THERMOSTAT, FLOW CONThis contract is for the procurement of a thermostat, flow control, part number 9844X110, manufactured by AMOT Controls Corp with CAGE code 94607, under the NSN 6685-01-288-9802. A total of four units are required at a unit price of $4.00, resulting in a total contract value of $16.00. The item is classified as a critical application item, and mercury or mercury-containing compounds are strictly prohibited from being intentionally added to or coming into direct contact with the hardware, except for specified functional uses such as batteries, fluorescent lights, sensors, or weapon systems as defined by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shock-proof and include a secondary containment boundary, per NAVSEA 5100-003D. Packaging and shipping must fully comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and all packaging must adhere to DLA’s proprietary packaging requirements. Hazardous materials packaging regulations prohibit mercury in preservation, packaging, packing, or marking. The delivery is FOB origin, with inspection and acceptance occurring at destination, and no quantity variance is permitted. The delivery timeline is 78 days from the contract award, with the original required delivery date set for July 28, 2026. The contract is a total small business set-aside under NAICS code 334519, administered by the Department of Defense, with deliveries directed to the DLA Distribution facility in New Cumberland, Pennsylvania. Technical and quality requirements referenced in the document are drawn from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
METER, TIME TOTALIZIThis contract, issued under solicitation number SPE4A6-26-T-10BD by the Department of Defense’s ASC Commodities Division, pertains to the procurement of one unit of a meter and time totalizing device identified by NSN 6645-01-703-2251 and part number B16C8CA-136. The item must be delivered within 20 days to the address in Virginia Beach, Virginia, under FOB origin terms with zero variance in quantity. Delivery must be made by the fastest traceable means, explicitly prohibiting parcel post, and must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements. The item has a non-extendable 12-month shelf life as a Type I item and must not contain mercury or mercury compounds in any component, packaging, or preservation method except for specified functional uses in batteries, fluorescent lights, or instrument controls per NAVSEA 5100-003D, which also mandates secondary containment for portable mercury-containing devices. Inspection and acceptance occur at the destination, with sampling to follow MIL-STD-1916 or an approved zero-based sampling plan, assigning verification levels of VII, IV, and II for critical, major, and minor attributes respectively. Packaging must adhere to DLA requirements, and all documentation must reflect the designated unit of issue per DoD standards. The required delivery date is July 22, 2026, and the item is subject to strict government-use-only tracking and compliance protocols including compliance with defense information handling and procurement regulations.
ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
INDICATOR, TEMPERATURE,This contract pertains to the procurement of temperature indicators with electrical resistance, identified by NSN 6685-00-956-5040 and part numbers 414-290F-143C and TLL-21-290, supplied by Palmer Wahl Instruments Inc. and Tempil Inc. The unit of issue is Package 1 (PG), with a quantity of 8,086 units required, to be delivered in 53 days FOB origin with no variance permitted in quantity. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951 unless explicitly overridden. Inspection and acceptance occur at the origin, following zero-defect sampling criteria per MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Marking and packaging must comply with MIL-STD-129 and DLA Packaging Requirements, with hazardous materials handled per TQ requirement IP025 and non-hazardous items packaged per commercial standards. The item is designated a critical application item and must be physically identified as specified. Delivery is to DLA Distribution Cherry Point, North Carolina, and all documentation, including source approval requests, must adhere to specified contractual provisions. The solicitation number is SPE4A6-26-T-10CK, with a response deadline of August 5, 2026, and an original required delivery date of July 28, 2026.
ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
ADAPTER, QUICK RELEAThe contract pertains to the procurement of 21 units of an ADAPTER, QUICK RELEASE with NSN 6675-01-564-4712 under solicitation SPE8EE-26-T-2190, issued by the Department of Defense through the Defense Logistics Agency. The delivery must be completed within 57 days after order award, and the place of performance is identified as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, and is classified under NAICS code 334519 for other electrical equipment and component manufacturing. The acquisition is subject to DLA packaging requirements and incorporates technical and quality specifications referenced through R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Covered Defense Information may apply, and suppliers must remove any government identification from non-accepted supplies. Primary point of contact for inquiries is Philip Ferrara, reachable via email and phone provided.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 22 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334519
New
DIBBS
CONTROLLER, MOTORThe contract pertains to the procurement of a single unit of a motor controller identified by NSN 6110-01-286-5041, with a delivery requirement of five days after award. The solicitation number is SPE7M0-26-T-020H, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office, with performance location in Fife, Washington. The item does not require Unique Instrument Identification per customer request, and applicable DFARS provisions govern packaging and compliance. Technical and quality requirements are defined by the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation or award date depending on acquisition size. Sampling must follow MIL-STD-1916 or a comparable zero-based plan, with specified verification levels or AQLs for critical, major, and minor attributes; unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stated, and MIL-STD-105/ASQ Z1.4 may be used only to determine sample size, not acceptance criteria. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with supplied hardware, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or specified reagents, with portable mercury-containing devices requiring shock resistance and secondary containment per NAVSEA 5100-003D. Configuration control is enforced through engineering change proposals and variance requests, and the technical data package is not available from DLA. The contract was posted on July 28, 2026, with responses due by August 10, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 22 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334519
New
DIBBS
PANEL, INDICATORThe contract pertains to the procurement of one PANEL, INDICATOR with NSN 1680-01-168-3722, issued under solicitation SPE4A7-26-R-X970 as a total small business set-aside. Delivery is required within 223 days after order placement, with technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, including packaging standards RP001, tailored quality requirements RQ001, and inspection and acceptance at origin under RQ009. Removal of government identification from non-accepted supplies is mandated under RQ011. Item Unique Identification is not required per the service customer’s directive, though DFARS 252.211-7003(c)(1)(i) remains applicable. Digital Mylar data is provided as part of the technical package, and the contractor must ensure any conversion to stable base format maintains strict dimensional accuracy per ASME Y14.31 standards, with tolerances of ±0.005 inches vertically and horizontally and ±0.007 inches diagonally for individual grid units, and total grid tolerances of ±0.010 and ±0.014 inches diagonally. Measurements for trammmel points and registration marks must adhere to similar precision benchmarks. Sampling must follow MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. All export-controlled technical data is subject to ITAR or EAR regulations, with disclosure restricted to contractors holding approved US/Canada Joint Certification Program certification, having completed required DLA training and questionnaires, and receiving explicit authorization. DFARS 252.225-7048 governs the handling and dissemination of such data to foreign persons, regardless of location.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
GENERATOR, TACHOMETEThe contract is for a single unit of a tachometer generator, part number 30A-0262, with NSN 6680-00-618-5821, procured under solicitation SPE4A5-26-T-310Q. Delivery is required within 20 days from the contract date, with FOB origin terms, zero variance in quantity allowed, and inspection and acceptance performed at the origin. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with specific packaging codes and methods designated, and palletization must adhere to DLA packaging requirements. The item is not hazardous, as confirmed by HMIC review, and requires no Safety Data Sheet. No shelf life applies to this item, and unit identification is not required per customer request. Sampling for quality assurance follows MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels or AQLs as specified. Technical and quality requirements referenced through R and I numbers are governed by the DLA Master List, with revision control tied to the solicitation or award date. Marking and documentation must conform to contract specifications, and the final destination is the Taiwan Army’s Zuo-Ying Ammunition Subsite in Kaohsiung City. The contract is managed by the Department of Defense, with point of contact Hien-Van Trinh, and is classified for government use only.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
INDICATOR, ROUNDS REThe contract pertains to the procurement of three units of an INDICATOR, ROUNDS RE with NSN/Part Number 6680-00-224-9084, under solicitation SPE4A6-26-T-10DV, with a response deadline of August 5, 2026, and a delivery requirement within 20 days after award. Technical data associated with this item is subject to U.S. export control regulations, including ITAR or EAR, and any disclosure to foreign persons—whether within or outside the United States—requires prior authorization from the Department of State or Commerce. Access to this controlled data is restricted to contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by DLA. DFARS 252.225-7048 governs the handling of such data, and distribution is limited exclusively to DLA contractors meeting these stringent criteria. The offering is issued by the ASC Commodities Division of the Department of Defense, with Katisha Carter designated as the primary point of contact for inquiries.
ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

NAICS: 423830
New
Federal
Aerospace-Grade Equipment and Tooling Supply for Fiber ProcessingThe contract calls for the supply of specialized equipment, tooling, and instrumentation designed for the handling, storage, and processing of fibers in aerospace-grade cleanroom and laboratory environments, with all items required to meet stringent purity and contamination control standards appropriate for NASA mission-critical applications. The equipment must be compatible with sensitive aerospace manufacturing processes and capable of performing reliably under the exacting conditions of controlled environments where particulate and chemical contamination cannot be tolerated. All deliverables must be fully documented with compliance certifications, materialTraceability records, and validation testing data to ensure alignment with NASA’s quality and operational requirements. This is a subcontract opportunity issued by the NASA Shared Services Center under the National Aeronautics and Space Administration, with a North American Industry Classification System code of 423830, indicating a focus on wholesale trade of industrial equipment. The solicitation was posted on July 29, 2026, and responses are due by August 1, 2026, at 1:30 a.m. Eastern Time. While the specific place of performance and point of contact details are not provided, the nature of the work implies that equipment will be delivered to and utilized in NASA-affiliated facilities where fiber processing occurs in support of advanced aerospace systems. Potential vendors must demonstrate proven experience supplying similar high-precision tools for aerospace or highly regulated industries, with an emphasis on cleanroom compatibility, documentation rigor, and adherence to strict delivery timelines.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 3 hours ago

DEADLINE

in 2 days
View Details
NAICS: 326299
New
Federal
Cross-Lapper Equipment Operation and Variation TrialsThe contract requires the operation and modification of cross-lapper equipment to conduct trials that assess fiber laydown variations and enhance the uniformity and performance of TPS material on a commercial production line. The work centers on optimizing material characteristics through practical adjustments to equipment settings and processes, with a focus on achieving consistent, high-quality output suitable for aerospace applications. Success demands technical expertise in textile machinery operation, analytical evaluation of fiber distribution, and iterative process refinement to meet stringent performance criteria. This subcontract, listed under NAICS code 326299, is issued by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. It was posted on July 29, 2026, with a strict response deadline of August 1, 2026, at 1:30 AM. There is no designated set-aside classification, and while the specific location of performance is not provided, the work is expected to take place on a commercial production line aligned with NASA’s advanced material development objectives. The opportunity is open for competitive submission among qualified subcontractors with relevant experience in fiber processing and industrial equipment optimization.
All Other Rubber Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 2 days
View Details
NAICS: 541380
New
Federal
Thermal Protection System (TPS) Fiber Trade Studies and Material EvaluationThe contract involves conducting comprehensive trade studies to evaluate fiber diameter, carbon-to-phenolic composition, and performance characteristics of materials intended for NASA’s Thermal Protection System applications. These studies require detailed analysis of material behavior under extreme thermal and mechanical conditions to identify optimal formulations and configurations that enhance performance, durability, and mass efficiency for spacecraft re-entry environments. The work includes collecting, interpreting, and correlating experimental data to support decision-making in material selection and system design, with a strong emphasis on technical documentation and reporting to communicate findings clearly to NASA engineering teams. The subcontract is open for response until August 1, 2026, and falls under NAICS code 541380, indicating it is for other scientific and technical consulting services. It is administered by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, and while the place of performance is unspecified, the work is expected to support critical TPS development efforts for future space missions. The solicitation, posted on July 29, 2026, targets specialized contractors with expertise in advanced composite materials and aerospace thermal protection systems, requiring precision in testing methodologies and analytical rigor to meet NASA’s high-performance standards.
Testing Laboratories and Services

POSTED

about 3 hours ago

DEADLINE

in 2 days
View Details
NAICS: 325998
New
Federal
Procurement of Carbon and Kynol Fibers for Aerospace ApplicationsThe contract seeks the supply of 5 denier carbon and Kynol phenolic precursor fibers exclusively for development of thermal protection systems in aerospace applications, requiring strict adherence to aerospace-grade performance and material specifications. All fibers must meet rigorous quality standards, including consistent physical and chemical properties necessary for high-temperature environments, and full traceability of raw materials through every stage of production and delivery is mandatory to ensure compliance with NASA’s aerospace protocols. The subcontract is issued under the NAICS code 325998 for other chemical product and preparation manufacturing and is procured through the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration to support critical TPS research and development initiatives. Responses are due by August 1, 2026, at 1:30 AM, with no set-aside provisions specified, indicating open competition among qualified suppliers capable of fulfilling the technical and documentation demands of the requirement.
All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 2 days
View Details
NAICS: 541611
New
Federal
Off-site Training PurchaseThe contract titled Off-site Training Purchase, under solicitation number 80NSSC26939644Q, is issued by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. It is posted for response by August 3, 2026, at 6:00 PM Eastern Time, with a NAICS code of 541611 indicating it pertains to management consulting services. The contract requires vendors to submit a capability statement exclusively; quotes or pricing proposals will not be accepted. Performance is expected to occur at Stennis Space Center, Mississippi, with the primary point of contact being Cara Craft, reachable via email at cara.s.craft@nasa.gov. Interested parties must review the attached documents for detailed requirements and ensure their submissions demonstrate relevant expertise and capacity to deliver the off-site training services, with no other forms of proposals permitted under this opportunity.
Administrative Management and General Management Consulting Services

POSTED

about 3 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334516
New
Federal
INVENIO-X Fourier Transform Infrared Spectrometer with MultiTect unitNASA/NSSC is procuring the INVENIO-X Fourier Transform Infrared Spectrometer with MultiTect unit from BRUKER SCIENTIFIC LLC under a sole source contract authorized by FAR 12.102(a), as this vendor is the sole provider of the specified equipment. The contract will be managed by NASA/NSSC with performance taking place at NASA’s Goddard Space Flight Center, and the acquisition will follow commercial item procedures outlined in FAR Part 12. The NAICS code for this procurement is 334516. Interested parties may submit written capability statements to the designated point of contact no later than 8:30 p.m. Central Standard Time on July 31, 2026, to allow the government to evaluate whether full and open competition is warranted; however, the decision to proceed without competition rests solely with the government. Oral communications are not permitted in response to this notice. The NASA FAR Supplement Clause 1852.215-84, Ombudsman, applies, and inquiries may be directed to Cody Guidry, Procurement Specialist II, at Cody.d.guidry@nasa.gov, with Shari Trigg as the secondary point of contact. The solicitation number is 80NSSC26938746Q, and vendors must reference the Notice ID when submitting any capability information.
Analytical Laboratory Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335999
New
Federal
Electrical MaterialsThe solicitation for Electrical Materials is issued under RFQ Notice ID 80NSSC26938743Q by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, with a small business set aside totaling the contract. Vendors must submit their bids by August 5, 2026, at 3:00 PM Eastern Time and are required to reference the RFQ notice number in the subject line of their submission. All responses must include the vendor’s CAGE/UEI code, FOB destination terms, lead time for delivery, and the name and email of the point of contact. The place of performance is at Stennis Space Center, Mississippi, and payment will not be made via credit card. The North American Industry Classification System code for this procurement is 335999, and inquiries must be submitted no later than three days after the posting date of July 29, 2026. Primary point of contact is Monica Wilson at monica.d.wilson@nasa.gov, with Will Garrett as the secondary contact at will.c.garrett@nasa.gov.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333912
New
Federal
66A Rotary feedthrough for VOiD deposition systemNASA/NSSC is seeking to award a sole source contract to KURT J LESKER CO for the 66A Rotary feedthrough required for a VOiD deposition system, as it has been determined that this vendor is the sole provider of this specific component. The procurement will be conducted under FAR Part 12 as a commercial item acquisition, with performance taking place at NASA’s Glenn Research Center. The NAICS code for this effort is 333912, and the solicitation number is 80NSSC26938965Q. Although this is not a request for quotes and price submissions will not be reviewed, interested organizations may submit written capability and qualification statements by 9:00 a.m. Central Standard Time on August 3, 2026, solely to assist the government in determining whether to pursue competitive bidding. All correspondence must reference the contract ID to ensure proper tracking. Oral communications are prohibited, and the NASA FAR Supplement Clause 1852.215-84 on the Ombudsman applies. The primary point of contact is Monica Wilson, Procurement Assistant, with Karen Artis as the secondary contact. The contract will not utilize any set-aside programs.
Air and Gas Compressor Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 5 days
View Details
NAICS: 513210
New
Federal
ZCOVThe NASA Shared Services Center is soliciting capability statements for services under contract ZCOV, identified by solicitation number 80NSSC26939506Q, with a posted date of July 29, 2026, and a response deadline of August 3, 2026, at 5:00 PM Eastern Time. This solicitation is classified as a special notice under NAICS code 513210, which corresponds to data processing and hosting services, and is issued by the National Aeronautics and Space Administration. Only capability statements will be accepted; quotations or price proposals are explicitly not permitted. The office responsible for this requirement is located at Stennis Space Center, Mississippi, with the primary place of performance in Houston, Texas, zip code 77058. The sole point of contact for inquiries is Cara Craft, reachable via email at cara.s.craft@nasa.gov. All interested parties must submit their capability statements through the provided SAM.gov link before the deadline.
Software Publishers

POSTED

about 3 hours ago

DEADLINE

in 5 days
View Details
NAICS: 611430
New
Federal
Storytelling with Data Immersive WorkshopNASA Shared Services Center is procuring a Storytelling with Data Immersive Workshop under a sole-source contract authorized by FAR 12.102(a) from STORYTELLING WITH DATA LLC, recognized as the exclusive provider of this service. The contract, identified by solicitation number 80NSSC26937906Q and governed under NAICS code 611430, requires the vendor to deliver two full-day, in-person workshops for up to 35 participants each, totaling 70 attendees, at NASA’s Marshall Space Flight Center in Huntsville, Alabama. The workshops must focus on crafting impactful data stories, developing skills in graph and slide creation, integrating data with narrative messaging, and enhancing audience engagement, using NASA-provided examples and visuals to tailor content. All training materials, including participant handouts, exercise kits, and follow-up resources, must be provided by the vendor. Performance is scheduled for either August 24–26 or September 14–17, 2026. The procurement is structured as a commercial item acquisition, adhering to FAR Part 12 procedures, and no competitive bidding is planned unless objections submitted in writing by July 14, 2026, demonstrate sufficient alternative capabilities. Oral communications are prohibited in response to this notice, and the NASA FAR Supplement Clause 1852.215-84, Ombudsman, applies, with oversight contact information available through the designated procurement ombudsman directory. No contract value, CLIN structure, or specific payment terms are detailed.
Professional and Management Development Training

POSTED

about 3 hours ago

DEADLINE

in 2 days
View Details
NAICS: 518210
New
Federal
ForeFlight MFB and Jeppesen MCSNASA/NSSC is seeking to award a sole source contract to JEPPESEN FOREFLIGHT, INC. for the acquisition of ForeFlight MFB and Jeppesen MCS, as the company is the sole provider of these commercial items. The procurement is being conducted under FAR Part 12, which governs commercial item acquisitions, and is being managed by the NASA Shared Services Center with performance taking place at NASA’s Armstrong Flight Research Center in Edwards, California. The NAICS code for this procurement is 518210, and no set-aside designation applies. Interested parties may submit written capabilities and qualifications to the designated point of contact by 4:00 p.m. Central Standard Time on July 31, 2026, solely to assist the government in determining whether to pursue full and open competition; however, the final decision to proceed without competition rests entirely with the government. Oral submissions are not permitted, and the NASA FAR Supplement Clause 1852.215-84 on the Ombudsman is applicable, with the Center Ombudsman accessible via the provided link. The primary point of contact is Tracy Bremer, and the solicitation number is 80NSSC26939762Q.
Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

about 3 hours ago

DEADLINE

in 2 days
View Details
NAICS: 313230
New
Federal
FIBER TRADE STUDIES FOR THE COMMERCIAL PRODUCTION OF MERINO TPSNASA/NSSC is proceeding with a sole source procurement under FAR 12.102(a) to award a contract to American Felt and Filter Company Inc. for fiber trade studies supporting the commercial production of MERINO Thermal Protection Systems (TPS). The work, to be performed at NASA’s Ames Research Center in Moffett Field, California, involves procuring 5 denier carbon and Kynol fibers and conducting cross-lapper process trials to determine optimal configurations for maximizing through-thickness strength and yield of TPS batting. The contract is structured around two CLINs: the first for fiber and equipment procurement with a delivery deadline of December 30, 2026, and the second for cross-lapper variation trials, due by March 30, 2027. The acquisition is classified under NAICS code 313230 and treated as a commercial item procurement, following FAR Part 12 procedures without formal competitive bidding. The vendor must hold ISO 9001/AS9100 certification and demonstrate prior experience in fabricating flight-quality TPS, though no pricing, contract value, or FOB terms are disclosed. Submissions of capability statements referencing notice ID 80NSSC26939884Q must be submitted in writing via email to Cody Guidry by 8:30 p.m. CST on July 31, 2026, with oral communications prohibited. The NASA FAR Supplement clause 1852.215-84 on the Ombudsman applies, and while no formal evaluation factors or representation requirements are outlined, the contracting office is located at Stennis Space Center, Mississippi, with no Government-furnished property or anticipated travel costs involved.
Nonwoven Fabric Mills

POSTED

about 3 hours ago

DEADLINE

in 2 days
View Details