Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

HANDLE, BOW

Active
SPE7LX-26-U-9061Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a HANDLE, BOW with NSN 5340-01-521-6772 and quantity of 103 units, under solicitation SPE7LX-26-U-9061, issued by the Department of Defense’s Strategic Acquisition Program Directorate. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions determined by the solicitation or award date depending on acquisition size. The item is classified as a critical application item and must comply with MIL-STD-130N for identification marking. Ozone-depleting chemicals are strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be classified with verification levels or AQLs as specified. Packaging must adhere to DLA’s RP001 requirements and MIL-STD-129 for labeling, with hazardous materials complying with FED-STD-313 and TQ requirement IP025, while non-hazardous items follow ASTM D3951 subject to DLA requirements. Delivery is FOB origin with a 155-day delivery window, no quantity variance permitted, and inspection and acceptance occur at destination. The contract mandates full and open competition and includes specific technical documentation referenced to revision levels and drawing numbers.

General Info

Procure 103 HANDLE, BOW units under MIL-STD-130N, FOB origin, 155-day delivery, zero defects, no ozone-depleting chemicals.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE7LX-26-U-9061.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
View Agency Profile
Office AddressUS
Contacts
Theodore Misiolek
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HANDLE,BOW
HANDLE, BOW
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
FULL AND OPEN COMPETITION APPLY
CRITICAL APPLICATION ITEM
TDP Rev B Gen 2 IAW BASIC DRAWING NR 19207 12423270 REVISION NR DTD 07/09/2003
SPE7LX-26-U-9061
SECTION B
PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12420325 REVISION NR K DTD 07/09/2020 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12423270-001 REVISION NR DTD 06/21/2022 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE STD NR MIL-STD-1916 NOT 2 REVISION NR DTD 06/05/2014 PART PIECE NUMBER:
LINE ITEM 0000000001 TYPE OF COVERAGE: DLA DIRECT, CONUS
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 1000237075 0001 EA 103.000
This is an estimated quantity and may not be purchased by the IDC.
NSN/MATERIAL:5340015216772
DELIVERY (IN DAYS):0155
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

SPE7LX-26-U-9061 NSN/Part Number: 5340-01-521-6772 Quantity: 103 EA Purchase Request: 1000237075QTY: 103 Delivery: 155 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADEDThe item specified is a PIN, STRAIGHT, HEADED with NSN 5315-00-734-1175, quantity of 67 units, under purchase request 7015605086, with delivery required within 12 days ADO. This item is subject to strict export control regulations under either ITAR or EAR, meaning technical data associated with it cannot be disclosed to foreign persons regardless of location, including foreign national employees or subsidiaries of U.S. companies. Access to this technical data is restricted solely to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled data, and have been formally approved by the DLA controlling authority. The solicitation number is SPE4A6-26-T-10AJ, posted on July 28, 2026, with responses due by August 5, 2026. The procurement falls under NAICS code 332510 and is managed by the ASC Commodities Division of the Department of Defense, with performance taking place in Cherry Point, North Carolina, 28533-5040. Primary point of contact is Debra Fowler, reachable via email and phone listed in the contract data.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
DISK, SOLID, PLAINThe contract pertains to the procurement of two solid plain disks with NSN 5340-01-005-1903 under solicitation SPE7L1-26-T-882P, issued by the Department of Defense’s Land Supply Chain. Delivery is required within 20 days of award, and responses are due by August 10, 2026. The item falls under NAICS code 332510, and the solicitation is governed by DLA packaging and technical quality requirements as outlined in the DLA Master List of Technical and Quality Requirements, accessible via the provided web link. All technical and quality specifications referenced by R or I numbers are incorporated by reference and must be strictly adhered to. Sampling and inspection protocols must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with the manufacturer allowed to choose attribute or variable inspection methods unless otherwise directed. Critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0; any unspecified attributes are deemed major. Acceptance criteria require zero non-conformances in the sample lot under MIL-STD-105/ASQ Z1.4 unless the contract specifies otherwise. Government identification must be removed from non-accepted supplies, and all provisions are subject to the revision of the DLA Master List in effect at the relevant solicitation or award date. Contact for inquiries is Michael Nordahl at dla.flbc2prs@dla.mil or 445-737-0596.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
LOOP, STRAP FASTENERThe contract is for the procurement of 50 units of a LOOP, STRAP FASTENER with NSN 5340-01-453-6529 under solicitation SPE7L1-26-T-887T, issued by the Department of Defense’s Land Supply Chain. The item must be delivered within five days of award to Anniston, Alabama, with full and open competition applicable. The supplier must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including packaging, removal of government identification from non-accepted supplies, and handling of covered defense information. The product is subject to strict environmental restrictions: no intentional addition of mercury or mercury compounds unless exempted for specific functional uses such as batteries or instruments, and portable fluorescent lamps or instruments containing mercury must have shock-proof design and a secondary containment boundary per NAVSEA 5100-003D. Additionally, class I ozone-depleting chemicals are prohibited, and any substitute chemicals require prior approval unless explicitly authorized. The contract mandates compliance with MIL-STD-1916 or ASQ H1331 for sampling, assigning verification levels VII, IV, and II to critical, major, and minor attributes respectively, or AQLs of 0.1, 1.0, and 4.0, with unspecified attributes treated as major. Zero non-conformances are required in sample lots unless otherwise stated, and manufacturers may choose attribute or variable inspection methods. Export control is critical: technical data associated with this item is subject to ITAR or EAR regulations, requiring prior authorization for any export or disclosure to foreign persons, even within the United States. Only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on handling export-controlled data, and formal DLA approval may access such data. The solicitation closes on August 10, 2026, and all suppliers must meet cybersecurity requirements through CMMC Level 2 certification as a third-party assessment organization.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
PIN, GROOVED, HEADEDThe contract pertains to the procurement of five grooved headed pins, identified by NSN 5315-00-721-8488 and part number 6827118, meeting stringent technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. The item is designated as a critical application part, used by major defense contractors including General Motors, Rolls-Royce, and Dyna-Empire Inc. Sampling must comply with MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are to be classified with verification levels or AQLs as prescribed. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization specified accordingly, while all items must be marked per RQ017 and prepared for delivery in accordance with ASTM D3951 only where not overridden by DLA standards. Delivery is required FOB origin within 255 days of contract award, with no tolerance for quantity variance, and inspection and acceptance occur at the destination facility. The goods must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, by the required ship date of April 18, 2027. The unit of issue is each, with a total contract value of $25.00, and the contract is issued under solicitation SPE4A6-26-T-10DJ, with full source approval documentation and quality verification procedures mandated. Transportation and shipping protocols are governed by DLAD Proc Notes C19 and C20, and all documentation must align with the DoD unit of issue guidelines referenced in the official DLA spreadsheet. The point of contact for procurement inquiries is Ericka Mosley of the ASC Commodities Division, Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
HINGE HALFThe contract pertains to the supply of 18 units of HINGE HALF with NSN 5340-01-472-0836, under solicitation SPE7L1-26-T-886N, with a response deadline of August 10, 2026, and a required delivery within 116 days after order. The product is governed by technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and all supplies must be free of asbestos; any alternatives require formal approval per Clause L30. Mercury and mercury-containing compounds are strictly prohibited unless used functionally in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier, in accordance with NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies. The contract is administered by the Department of Defense’s Land Supply Chain, with performance location in San Diego, California, and primary point of contact Michael Nordahl at dla.flbc2prs@dla.mil.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
STUD, TURNLOCK FASTENERThe contract is for the procurement of 167 units of a STUD, TURNLOCK FASTENER with NSN 5325-00-343-4903 and part number 121J-440-Z3YT from SOUTHCO INC, delivered FOB origin within 19 days. The item is classified as a critical application item and must comply with all applicable DLA technical and quality requirements referenced in the DLA Master List, including strict prohibitions against the intentional use of mercury or mercury-containing compounds in the hardware, preservation, packaging, or marking processes, with limited exceptions for specified functional uses like batteries or instrument components, which must meet additional containment standards per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E with specific preservation methods and materials, and all markings must conform to MIL-STD-129 without any special labeling. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The contract includes a zero percent quantity variance and requires compliance with DLA transportation procedures C19 and C20. The solicitation number is SPE4A6-26-T-10CX, with a response deadline of August 5, 2026, and the original required delivery date is February 13, 2027.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
RING, EXTERNALLY THRThe contract specifies the procurement of an externally threaded ring with part number 5365-00-105-3858, quantity of 10 units, to be delivered FOB origin within 330 days of contract award, with no tolerance for quantity variance. Delivery is directed to Arizona Industries for the Blind in Phoenix, AZ, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marked identification per MIL-STD-129 with no special marking codes, and palletization per RP001. The item is designated as a critical application, requiring zero non-conformances in sampling per MIL-STD-1916 or ASQ Z1331, with unspecified attributes treated as major and verification levels assigned accordingly. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with applicable revisions determined by the solicitation or award date. The contracting activity is under SPE4A7-26-T-598U, issued by the Department of Defense, with Johanna Cruz Cruz as the point of contact for inquiries. The solicitation was posted July 28, 2026, with responses due by August 5, 2026, and the product falls under NAICS code 332510 for machinery manufacturing.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOPThis contract, identified by solicitation number SPE7L4-26-U-1025, pertains to the procurement of CLAMP, LOOP with NSN 5340-00-664-3774, for a quantity of 616 units, under a total small business set-aside. The item is to be delivered FOB origin within 116 days of contract award, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply fully with MIL-STD-2073-1E and DLA’s packaging requirements, including specific methods for preservation, wrapping, and containerization, with marking aligned to MIL-STD-129 and no special marking required. The contract explicitly prohibits the use or incorporation of Class I ozone-depleting chemicals, overriding any conflicting specification requirements while maintaining all product performance standards. Substitute chemicals must be approved prior to use unless already authorized by the specification. The items are designated as critical application items with potential application of Covered Defense Information requirements. Only two approved suppliers are listed: SMITHS TUBULAR SYSTEMS-LACONIA, INC. and GE DBA GENERAL ELECTRIC COMPANY. The unit of issue is each, in accordance with DoD standards. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revision control tied to the solicitation issue or award date depending on acquisition size. The point of contact for inquiries is Karryn Hoston at the Department of Defense’s LSO Combat Vehicles and Armament office.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
PAD EYEThe contract specifies the supply of a single PAD EYE item with NSN 2040-01-128-5942 and part number 87725-4505, requiring delivery within 20 days from the origin point under FOB origin terms with no tolerance for quantity variance. Strict prohibitions are in place against the intentional addition or direct contact of mercury or mercury-containing compounds with the hardware or supplies, except for functional uses in batteries, fluorescent lamps, calibrated instruments, sensors, weapon systems, or chemical analysis reagents specifically authorized by NAVSEA. Portable devices containing mercury must be shockproof and include a secondary containment barrier compliant with NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 marking standards, with palletization following DLA packaging requirements. The item is destined for the Royal Jordanian Air Force at Muwaffaq Salti AB in Jordan, with transportation governed by DLAD procedural notes C19 and C20. The contract is issued under solicitation SPE7M4-26-T-290Q, with a response deadline of August 10, 2026, and falls under NAICS code 332510. All technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List, and the specified revision in effect at the RFP issue date controls unless amended.
FLUID HANDLING DIVISION

POSTED

about 15 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
SPACER, RINGOfferors must comply with strict domestic sourcing requirements under the Berry Amendment and Buy American Act, with thresholds now set at $150,000, mandating disclosure of any non-domestic materials and adherence to DFARS clauses 252.225-7006, 252.225-7012, and 252.225-7015. The solicitation prohibits the use of covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and additive manufacturing is strictly forbidden unless prior written approval is obtained from the contracting officer. Quantities must be quoted as ranges due to fluctuating demands, facilitating award flexibility without resolicitation, except for Auto IDC. Small business joint ventures must provide certifications under FAR 52.212-3 and 52.219-1 for eligibility categories including small business, service-disabled veteran-owned, WOSB, economically disadvantaged WOSB, or HUBZone. All contractors must register via DLA’s AMPS system within two months to access the Vendor Shipment Module, with WebServices users required to update their internal schemas to avoid shipment disruptions. Offers submitted after the closing date must use the “No Bid” option on DIBBS with a reason or anticipated quote date to inform buyers and prevent unnecessary follow-ups. The item in question is a ring spacer, NSN 5365-01-147-2623, with a quantity of five units, delivery due in 164 days, under solicitation SPE4A7-26-T-599E, managed by the Department of Defense through the ASC Supplier Operations AE and AF Division, with Destiny Stevenson as the primary point of contact. Fast Pay is not applicable.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, ANGLEThe item is a BRACKET, ANGLE with NSN/Part Number 5340-01-336-6760, with a quantity of four units required under Purchase Request 7017639054, and delivery must be completed within five days of award. The solicitation number is SPE7L1-26-T-887A, posted on July 28, 2026, with responses due by August 10, 2026, under NAICS code 332510. This procurement is managed by the Department of Defense through the Land Supply Chain, with performance to occur in Chambersburg, Pennsylvania, and primary point of contact is Kristina Derry at kristina.derry@dla.mil or 6146920158. The technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons or entities without prior authorization from the Department of State or Department of Commerce. Access to this controlled data is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and questionnaire, and have received explicit approval from the DLA controlling authority. DFARS 252.225-7048 governs the handling of this technical data, and compliance with these restrictions applies uniformly to all contractors, including U.S. companies and their foreign subsidiaries.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
MOUNT, RESILIENT, UTIThis contract specifies the procurement of a resilient mount for utility applications under solicitation SPE7L1-26-U-0512, with a total quantity of 53 units to be delivered FOB origin within 64 days. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any commercial standards such as ASTM D3951 unless otherwise directed. The item must comply with strict material restrictions, including a complete ban on asbestos as defined in FED-STD-313 and prohibitions against the intentional addition of mercury or mercury-containing compounds, except for specific functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical reagents specified by NAVSEA. Portable mercury-containing devices must include shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. Packaging and labeling must adhere to MIL-STD-129 and DLA Packaging Requirements (RP001), with hazardous material packaging following IP025 if applicable. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required for acceptance unless otherwise stated, and attributes are categorized with assigned verification levels or AQLs. The contract is a total small business set-aside under NAICS code 332510, with delivery and acceptance occurring at the destination, and no variance permitted in quantity. DIN standards are not provided directly and must be acquired from third parties. Covered Defense Information may apply, and the item is identified by NSN 5340-12-333-9433 with the part number DIN95363-A25X20-M6X16-NR70ST.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 336320
New
DIBBS
WINDSHIELD WIPER ASSEMThe contract pertains to the procurement of a windshield wiper assembly with NSN 2540-01-504-5424 and part number 8036274, supplied by JLG Industries, Inc., under solicitation SPE7LX-26-U-9054. The quantity ordered is 13 units, delivered FOB origin with a delivery period of 81 days, and no variance is permitted in quantity. Inspection and acceptance occur at the destination, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, which override any ASTM D3951 standards. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must meet RP001 DLA Packaging Requirements. If the item is classified as hazardous per FED-STD-313, it must be packaged according to TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable, subject to DLA’s higher-priority standards. The unit of issue is each, with a quantity per unit pack of one, and government identification must be removed from non-accepted supplies. The contract is part of a direct, CONUS acquisition under DLA, and all technical specifications referenced are controlled by the version of the DLA Master List in effect on the solicitation issue date. The solicitation was posted on July 28, 2026, with a response deadline of August 12, 2026, and involves a NAICS code of 336320 under the Department of Defense’s Strategic Acquisition Program Directorate.
Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336211
New
DIBBS
BOOT, DUST AND MOISTUREThe contract pertains to the procurement of 409 units of a BOOT, DUST AND MOISTURE SEAL with NSN/Part Number 5340-01-108-3680, under solicitation SPE7LX-26-U-9060, issued by the Department of Defense’s Strategic Acquisition Program Directorate. Delivery is required within 155 days after contract award, and the solicitation is a Total Small Business Set-Aside as defined by FAR 19.5, with responses due by August 12, 2026. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting access and disclosure to foreign persons regardless of location, including foreign nationals employed by U.S. companies or their subsidiaries. Only DLA contractors with approved US/Canada Joint Certification Program status, who have completed required training and questionnaire submissions, are authorized to access this controlled data, with DFARS 252.225-7048 governing compliance. The point of contact for inquiries is Theodore Misiolek, reachable via phone or email provided.
Motor Vehicle Body Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMEDThis contract, identified by solicitation number SPE7LX-26-U-9049, seeks the procurement of 322 units of preformed packing with NSN 5330-01-172-2590, to be delivered within 80 days of award. The requirement incorporates all technical and quality specifications referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. Compliance with MIL-STD-130N for identification marking of U.S. military property is mandatory, and all items must be free of Class I ozone-depleting chemicals, with any substitutes requiring prior approval unless explicitly authorized by the specification. The contract enforces strict export control protocols under ITAR or EAR, prohibiting unauthorized disclosure of technical data to foreign persons or entities, and restricts access to contractors who hold valid US/Canada Joint Certification Program certification, have completed required DLA training on handling export-controlled data, and obtained formal approval from the DLA controlling authority. Configuration changes require formal engineering change proposals and variance requests, and all government identification must be removed from non-accepted supplies before disposal. Cybersecurity compliance mandates CMMC Level 2 certification for third-party assessment organizations involved in performance, and covered defense information is subject to applicable DFARS clauses, including DFARS 252.225-7048. The performance location and delivery terms are governed by U.S. federal standards, and inquiries should be directed to the primary point of contact, Theodore Misiolek, at the provided DLA email and phone.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, SHOULDEREDThe contract is for the procurement of a SHAFT, SHOULDERED with NSN 3040-00-200-1392 and part number 195533, supplied by AERO INTERNATIONAL, LLC, under solicitation SPE7LX-26-U-9041. It is a Total Small Business Set-Aside with a NAICS code of 333613 and includes a requirement for Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment. The item is classified as a Critical Application Item and must comply with DLA packaging standards per RP001 and MIL-STD-2073-1E, with specific packaging codes and marking per MIL-STD-129. Delivery is to be FOB origin within 151 days, with inspection and acceptance occurring at the destination. The quantity is strictly fixed at 15 units with no variance allowed and is estimated, meaning the IDC may not purchase all units. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero nonconformances unless otherwise specified, and attributes must be verified at assigned levels or AQLs. Item Unique Identification is not required per the Service customer's request. Measurement and test equipment must meet applicable standards, and all technical and quality requirements are governed by the DLA Master List. The contract is administered by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336412
New
DIBBS
NOZZLE, STARTER FUELThe contract is for the procurement of 67 units of a starter fuel nozzle, identified by NSN 2910-00-919-2022 and part numbers 915914C1 from RTX Corporation and 970-2 from COLLINS ENGINE NOZZLES, INC, intended for use on CH-47 Chinook helicopters. This is a critical application item sourced under a total small business set-aside, with a unit price of $67.00 per unit, resulting in a total price of $4,489.00. Delivery is required within 167 days FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at destination. All packaging must comply with ASTM D3951 and MIL-STD-129, strictly adhering to DLA’s Master List of Technical and Quality Requirements, which override any other standards. Palletization must follow DLA’s RP001 packaging guidelines, and the item is subject to configuration change management and variance control procedures. The solicitation number is SPE7LX-26-U-8795, issued by the Department of Defense’s Strategic Acquisition Program Directorate, with responses due by July 31, 2026, and the point of contact is Theodore Misiolek.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, SHOULDEREDThe contract pertains to the procurement of a SHAFT, SHOULDERED with NSN 3040-01-208-9288 and part number 7-0064-01 manufactured by AIR & LIQUID SYSTEMS CORPORATION, under solicitation SPE7LX-26-U-9059. A total of 11 units are required at a unit price of $11.00, with delivery due within 129 days FOB origin and no variance allowed in quantity. The item is classified as a critical application component, and delivery must comply with MIL-STD-2073-1E packaging standards including Preservative Method 10, wrapping material JA, cushioning material AD, and unit container FO, with marking in accordance with MIL-STD-129 and no special marking codes. Packaging must adhere to DLA’s RP001 requirements. The contract prohibits the intentional use or direct contact of mercury or mercury-containing compounds except for specified functional uses such as batteries, fluorescent lamps, sensors, and weapon systems, with portable devices containing mercury required to have shockproof design and secondary containment per NAVSEA 5100-003D. Class I ozone-depleting chemicals are strictly forbidden, and any substitute chemicals must be approved unless explicitly permitted by specification. Inspection and acceptance occur at the destination. The solicitation is issued by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact, and the item falls under NAICS code 333613. The estimated quantity is subject to non-purchase by the IDC.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333612
New
DIBBS
DISK, CLUTCH, NONVEHIThis contract pertains to the procurement of a nonvehicular clutch disk, identified by NSN 3010-00-812-8162 and part number 367237, with a quantity of 129 units to be delivered FOB origin within 104 days. The item is classified as a critical application item under DLA Direct, CONUS coverage, with no tolerance for quantity variance. All packaging and labeling must adhere to ASTM D3951 and MIL-STD-129 standards, with palletization strictly following DLA’s packaging requirements outlined in RP001, and all technical and quality specifications from the DLA Master List of Technical and Quality Requirements take precedence over any other standards. The contract includes mandatory compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and applies to covered defense information. Inspection and acceptance occur at the destination, and government identification must be removed from any non-accepted supplies. The unit of issue is each, priced at $129.00 per unit, with a total price of $16,641.00, and the quantity shown is an estimate potentially subject to adjustment by the IDC. The solicitation is issued under SPE7LX-26-U-9065, with a response deadline of August 12, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
RETAINER, PACKINGThe contract pertains to the procurement of 112 units of RETAINER, PACKING with NSN 5330-01-140-9926 under solicitation SPE7LX-26-U-9046, which is a total small business set-aside targeting small businesses as defined by FAR 19.5. Technical and quality standards governing this item are mandated by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment supersedes it. The item must conform to a recognized military or consensus non-government part standard, and only hardware produced to the current revision of the standard after the solicitation date is acceptable, though previously manufactured items adhering to former valid revisions remain eligible. Asbestos, as defined in FED-STD-313, is strictly prohibited. Mercury or mercury-containing compounds are banned from intentional addition or direct contact with the hardware, except for specific functional applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable devices containing mercury must be shockproof and include a secondary containment barrier in compliance with NAVSEA 5100-003D. Government identification must be removed from any non-accepted supplies. The delivery schedule requires fulfillment within 97 days of award, with the solicitation closing on August 12, 2026, and the point of contact being Theodore Misiolek of the Department of Defense’s Strategic Acquisition Program Directorate.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
HANDLE, MANUAL CONTROLThe contract pertains to the procurement of a manual control handle, identified by part number 10208-1003 and NSN 5340-01-413-3729, with a quantity of 93 units at a unit price of $93.00, resulting in a total price of $8,649. Delivery is required within 71 days under FOB origin terms, with no variance allowed in quantity. The item is classified as a critical application and must comply with all DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129 for marking, including specific packaging codes and methods without special marking. Mercury and mercury-containing compounds are strictly prohibited unless functionally essential and explicitly authorized, such as in batteries, fluorescent lamps, or certain instruments, with additional requirements for shock-proof containment and secondary boundaries as specified by NAVSEA 5100-003D. Packaging and shipping must adhere to IP025 standards for hazardous materials where applicable. Inspection and acceptance occur at the destination, and the item is procured through a DLA Direct, CONUS contract. The solicitation is issued under SPE7LX-26-U-9048 with a response deadline of August 12, 2026, and falls under NAICS code 332510. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date. The point of contact for inquiries is Theodore Misiolek of the Department of Defense’s Strategic Acquisition Program Directorate.
Hardware Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
RETAINER, NUT AND BOLTThe contract pertains to the procurement of 111 units of a retainer, nut, and bolt identified by part number SLR409-16AF and NSN 5340-01-387-5261, classified as a commercial item. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or award date depending on the acquisition size. Government identification must be removed from non-accepted supplies in accordance with RQ011. The solicitation, numbered SPE7LX-26-U-9045, was posted on July 28, 2026, with responses due by August 12, 2026, and is a total small business set-aside under NAICS code 332510. Delivery is required within 116 days after contract award, and the contracting office is the Strategic Acquisition Program Directorate within the Department of Defense. The primary point of contact is Theodore Misiolek, reachable via email and phone provided.
Hardware Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332999
New
DIBBS
PANEL, BODY, VEHICULAThe contract pertains to the procurement of a PANEL, BODY, VEHICULA with NSN 2510-01-574-8401 and part number 500K3171-1, issued under solicitation SPE7LX-26-U-9055 by the Department of Defense’s Strategic Acquisition Program Directorate. The quantity is 78 units, each priced at $78.00, for a total of $6,084, with delivery required within 129 days FOB origin. The unit of issue is each (EA), and no quantity variance is permitted. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 while strictly adhering to the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards. All packaging and labeling must follow MIL-STD-129, and palletization must conform to RP001: DLA Packaging Requirements for Procurement. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted supplies per RQ011. The contract is classified as DLA Direct, CONUS, and the solicitation was posted on July 28, 2026, with a response deadline of August 12, 2026. Primary point of contact is Theodore Misiolek, reachable via phone or email provided.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333415
New
DIBBS
PUMP, COOLING SYSTEMThe contract pertains to the procurement of a remanufactured cooling system pump kit for engine applications, specifically identified by NSN 2930-01-496-1268 and part number DDE R23539929, supplied by Daimler Truck North America LLC. The item is to be delivered in 71 days under a DLA Direct, CONUS coverage arrangement with a total quantity of 72 kits, each comprising a water pump and seal. The delivery is FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must strictly comply with ASTM D3951, but DLA’s Master List of Technical and Quality Requirements takes precedence, mandating marking and labeling in accordance with MIL-STD-129 and palletization per RP001. The unit of issue is KT, and all packaging details must align with the specified QUP. This solicitation, issued under SPE7LX-26-U-9067, is a total small business set-aside under NAICS code 333415, with responses due by August 12, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details