Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Subcontract opportunity from Department Of Defense was posted on September 18, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Hardwood Saw-Timber and Pulpwood Harvesting

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 113310
New
SLED
04-2026BC01 - Jones Mill Run
Solicitation # 042026BC01
The Pennsylvania Department of Conservation and Natural Resources Bureau of Forestry is soliciting a Tree Estimate Timber Stumpage Sale for 140 acres located in Jefferson Township, Somerset County, Pennsylvania. The sale is divided into sixteen blocks and consists of approximately 2169.91 MBF of mostly Red Oak and 356.34 HCF of mostly Red Maple and Northern Hardwood pulp. The contract will be awarded to the highest qualified bidder, provided they meet the statewide Contractor Responsibility Program requirements and conform to Pennsylvania non-discrimination regulations. Bidders must submit electronically signed bids via Bid Express by December 9, 2026, accompanied by a 10,000 dollar bid deposit. The scope of work requires the buyer to perform significant infrastructure and site maintenance, including the installation of three temporary skid trail bridges, 32 broad based dips, six stone headwalls, and six stone endwalls. The buyer is also responsible for procuring and installing various HDPE culverts, 8 rolls of non-woven geotextile, and over 2,100 tons of limestone (including #3, ZRC, and ZA varieties), as well as seeding and mulching approximately 4 acres of disturbed areas. Operational restrictions prohibit hauling and skidding from November 16 to April 1. On-site crew leaders must be trained under the Pennsylvania Sustainable Forestry Initiative, and strict marking protocols using specific paint colors must be followed to distinguish between trees to be felled and reserved trees.
Pennsylvania Department of Conservation and Natural Resources Bureau of Forestry, Silviculture Section

POSTED

2 days ago

DEADLINE

in about 1 month
NAICS: 113310
New
Federal
Invitation for Bids, Camp Navajo, Arizona, Salvage Contract
Solicitation # DACA63-9-26-0522
Solicitation DACA63-9-26-0522 is an Invitation for Bids issued by the Fort Worth District of the U.S. Army Corps of Engineers for a salvage contract involving the purchase and removal of Ponderosa Pine timber at Camp Navajo, Arizona. The property is sold on an as is and where is basis, requiring the successful bidder to provide all necessary labor, equipment, and supplies for harvesting and removal at their own expense. Bids are evaluated based on the per unit bid price and must be accompanied by a 1,000 dollar deposit. The contract requires the purchaser to begin operations within ten days of a written notice to proceed, with all designated timber removed by September 30, 2028. Operational requirements include mandatory Munitions of Explosive awareness and Cultural Resources training for personnel, as well as strict adherence to environmental protections to minimize stream pollution. Equipment must meet safety standards, including the use of mufflers or spark arresters and compliance with Arizona state trucking laws. The government prohibits the possession of marking equipment on the reservation to ensure the integrity of the Installation Forester's designations. Bidders must also provide a small business status certification if the estimated value exceeds 2,000 dollars and may provide a performance bond for 100 percent of the performance deposits to cover potential damages or defaults.
W076 Endist Ft Worth

POSTED

2 days ago

DEADLINE

in about 1 month
NAICS: 113310
New
Federal
Invitation for Bids, Camp Navajo, Arizona, Lump Sum Contract
Solicitation # DACA63-9-27-0509
The United States Army Corps of Engineers, Fort Worth District, is soliciting bids for a lump sum contract for the purchase and removal of Ponderosa Pine timber located at Camp Navajo, Arizona. Under solicitation DACA63-9-27-0509, the selected purchaser must harvest and remove all designated timber by December 31, 2029. The project requires strict adherence to marking guidelines, where unmarked trees are to be cut, while yellow or orange paint indicates leave trees and white paint or flagging designates avoidance areas. Performance standards require pine sawtimber to be utilized to a 6-inch top diameter inside bark, with stumps cut as low as practical and no higher than 12 inches on the uphill side. Bids must be submitted in sealed envelopes by 11:00 AM local time on December 9, 2026, and must include a bid deposit of $10,000, split equally between a performance deposit and pre-paid timber. Contractors must comply with all federal and state environmental regulations and Camp Navajo access rules, including providing employee identification and ensuring all internal combustion equipment is fitted with mufflers or spark arresters. The contract allows for termination for convenience by the Real Estate Contracting Officer with ten days' notice, and any factual disputes will be decided by the same officer. Bidders must also provide a Corporate Certificate and a Certificate as to Small Business Status if the estimated value exceeds $2,000.
W076 Endist Ft Worth

POSTED

2 days ago

DEADLINE

in about 1 month
NAICS: 113310
New
SLED
F&W Anadromous Fisheries Division, Salmon Creek RM8 Fish log procurement
Solicitation # RFP-Salmon-Creek-RM8-Fish-Log-Procurement_001-1.pdf
The Confederated Tribes of the Colville Reservation Anadromous Fisheries Division is soliciting proposals for a fixed-price contract to procure, haul, and deck 750 fish logs to support salmon habitat restoration near Okanogan, Washington. The scope of work requires the contractor to secure Douglas Fir or Western Larch logs with root structures, each measuring at least 40 feet in length with a diameter at breast height of 18 to 24 inches. Logs must be of sound stock, free from rot, splitting, or pest infection. Additionally, the contractor is responsible for improving access roads to staging areas, which may involve delivering 2 to 4 dump truck loads of material. All logs must be delivered and stockpiled at 696 Salmon Creek Road no later than July 1, 2026, with the overall performance period extending through September 30, 2027. Proposals are due by 3:00 p.m. PST on November 19, 2026. The evaluation process prioritizes reliable and effective services within a reasonable budget, utilizing a TERO tiering system that provides preferences to Colville and other Indian Business Enterprises. A responsible Indian Offeror may be awarded the contract if their price is within 10 percent of the lowest non-Indian offer and they demonstrate necessary expertise. Awarded contracts exceeding 100,000 dollars require a performance bond; otherwise, a 25 percent retainage is required. Payments are contingent upon the availability of funds in the tribal treasury and follow the tribal fiscal year of October 1 to September 30. Offerors must submit a detailed cost proposal covering mobilization, hauling, decking, fish logs, and road improvements, along with professional resumes and a certification regarding debarment and suspension.
Confederated Tribes of the Colville Reservation

POSTED

2 days ago

DEADLINE

in 11 days
NAICS: 113310
New
SLED
North Star Huckleberry Restoration Contract
Solicitation # NorhtStarHuckRest2026.pdf
The North Star Huckleberry Restoration Contract is a solicitation issued by the Confederated Tribes of the Colville Reservation for restoration work at huckleberry gathering sites affected by the North Star fire in Washington. The primary objective is to restore these sites to pre-wildfire conditions and improve safety for gatherers and planting crews. The scope of work involves the removal of all standing dead and dying conifer trees and dead/down material across approximately 27 acres in Block 133 and 20 acres in Block 129. Contractors must utilize a shovel logging system with a heel rack to minimize disturbance to the huckleberries and are responsible for providing all necessary labor, equipment, and transportation. Materials must be sorted into firewood decks for Western Larch and Douglas-fir, BioChar piles for identifiable species, and haystacked burn piles for undetermined species, with all debris hauled to an off-site location. Bids must be submitted in a sealed envelope by November 19, 2026. To be considered, offerors must provide proof of Contractors Liability Insurance of at least $1,000,000, current Sam.gov registration, and a list of at least three references demonstrating successful completion of similar work. Additionally, bidders must provide certifications regarding Title 10 and Indian Preference, including a copy of their blue card if applicable. The contract requires all work to comply with NRCS Implementation Requirements and guidance from the Colville Conservation District Program's Contracting Officer Representative, who must provide written approval for all pile and trail locations. The project must be completed by December 31, 2027, and the award will be based on a ranking of proposals.
Confederated Tribes of the Colville Reservation

POSTED

2 days ago

DEADLINE

in 11 days
NAICS: 113310
New
International
TA1450 - Mahood - Kamloops TSA (Clearwater)
Solicitation # TA1450
Solicitation TA1450 is a Timber Sale Licence issued by the BC Timber Sales Branch for the Mahood West area within the Kamloops Business Area of British Columbia. The project focuses on the construction and management of road infrastructure for Road CL R25092.01 Mahood West, involving earthworks, clearing, and the installation of culverts ranging from 600 mm to 800 mm over a total trail length of 1,573 meters. Performance standards require strict adherence to BCTS Environmental Management Systems to prevent sediment transport and ensure road drainage is shaped to prevent water pooling. Regeneration targets for the area include a performance standard of 100% and a block target of 80%. The contract will be awarded to the applicant who submits the highest bonus bid or bonus offer among all eligible applications. To be eligible, applicants must provide proof of identity, registration as a BC timber sales enterprise, and evidence of meeting primary performance and financial criteria. Bidders are required to review the Safety and Highlights Report to identify field hazards and must comply with the Workers Compensation Act, where TSL holders are classified as owners. Hardcopy submissions must be delivered to the Kamloops Timber Sales office by December 8, 2026, at 11:00 A.M. local time, utilizing the specified tender envelopes and response forms.
BC Timber Sales Branch

POSTED

3 days ago

DEADLINE

in about 1 month

AI Contract Overview

Show more

This subcontract involves the harvesting of hardwood saw-timber and pulpwood at Arnold Air Force Base in Tennessee for the Department of Defense. The scope of work includes felling, skidding, and loading operations using specialized equipment such as feller bunchers, skidders, and log loaders. The project requires the harvest of approximately 91,200 board feet of hardwood saw-timber and 314 actual tons of hardwood pulpwood, with measurement and scaling conducted using the Doyle Scale. The contractor is responsible for the removal and delivery of all harvested timber from the site. This opportunity is managed by the FA9101 Aedc Pkp Procurement Branch and falls under NAICS code 113310. The response deadline for this requirement is October 9, 2026.

General Info

Hardwood timber and pulpwood harvesting at Arnold Air Force Base, Tennessee by October 2026.

NAICS

113310 - Logging

Place of Performance

TN-01, TN, 37389, USA

Set-Aside

NONE

Documents

This scope was carved out of FA910126QB076_2027_Timber_Sale_ArnoldAFB.

The full solicitation package (10 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

2027 Timber Harvest Arnold AFB, TN

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA9101 Aedc Pkp Procrmnt Branch
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Performs felling, skidding, and loading of hardwood timber for prime contractors on US Air Force projects at Arnold AFB, TN. Harvests approximately 91,200 board feet of Hardwood Saw-Timber and 314 actual tons of Hardwood Pulpwood. Uses feller bunchers, skidders, and log loaders. Performs measurement and scaling using the Doyle Scale. Delivers harvested hardwood timber removed from the site.

More opportunities from Department Of Defense → FA9101 Aedc Pkp Procrmnt Branch

Same awarding agency

NAICS: 332912
New
Federal
Tunnel 9 Pitch Upgrade
Solicitation # FA9101T9PU
The Arnold Engineering Development Complex (AEDC) requires the comprehensive modernization of a high-performance hydraulic motion system for Tunnel 9 located in Silver Spring, Maryland. This 100% Small Business Set-Aside is a Firm-Fixed-Price contract encompassing the design, engineering, procurement, off-site fabrication, pre-assembly, on-site demolition, installation, and commissioning of core system components. Key hardware requirements include a primary control valve with a step response time of 55 ms or less, a main actuating cylinder with a 120.5-inch working stroke capable of 13 ft/s linear speed, a Hydraulic Power Unit (HPU), and a dedicated filtration and cooling kidney loop. All components must adhere to ASME B31.1, ASME BPVC VIII, and ISO 4406 standards, with specific requirements for near-vacuum environment reliability and compatibility with DTE-26 Ultra hydraulic oil. The project is structured into three distinct phases: Engineering Design, Part Procurement and Pre-assembly, and Demolition, Installation, and Commissioning. The total period of performance is 46 weeks from the lead time event. Award will be based on a combination of technical capability, past performance on similar hydraulic systems, and price reasonableness. Contractors must meet CMMC Level 1 (Self) cybersecurity requirements and possess the ability to handle Controlled Unclassified Information (CUI). Rigorous quality controls are mandated, including hydrostatic pressure testing, live performance demonstrations witnessed by AEDC, and strict adherence to MIL-STD-130 and MIL-STD-129 for item marking and shipment. Payment will be processed electronically via the Wide Area WorkFlow (WAWF) system.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 811310
New
Federal
PES E-Unit Footer Repair
Solicitation # FA9101_PESEUNITREPAIR
The Air Force Test Center is issuing a Sources Sought Notice to identify capable small and large businesses for emergency structural thread repair and precision mechanical alignment of an Allis Chalmers 1409 axial compressor at the Arnold Engineering Development Complex in Arnold AFB, Tennessee. The project involves lifting an 80,000 lbf compressor unit to repair stripped 2-1/2 inch-8 hold down threads on four footers, replacing 16 bolts with hardware that meets or exceeds original specifications, and performing a cold alignment of the complete drive system. The scope of work is divided into two CLINs covering the lift and repair process and the subsequent reconnection of the compressor to the motor and aft compressor. The government requires the work to be completed within 15 workdays or no later than December 15, 2026. The contractor is responsible for providing the necessary crane for lifting the unit and couplers, and must submit a detailed lift plan five working days prior to the operation. A site visit is required before the contract award. Interested respondents must provide their company information, SAM Unique Entity Identifier, and a brief description of their technical approach to meet the requirements by November 10, 2026. This notice is for informational purposes to determine market capability and does not constitute a formal solicitation or request for quote.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 333517
New
Federal
Large CNC EDM Sinker
Solicitation # FA9101_LARGE_CNC_EDM_SINKER
The Department of Defense, through the Arnold Engineering Development Complex (AEDC) at Arnold Air Force Base, Tennessee, has issued a Sources Sought Notice to identify capable small and large businesses for the procurement of a new, fully functional Large CNC EDM Sinker. This requirement strictly prohibits the use of refurbished or remanufactured parts. The selected contractor must provide all materials, labor, and equipment to deliver the machine FOB Arnold Air Force Base, with a required delivery timeline of four months from the receipt of order. The scope includes installation at the Model Shop in Building 451, supervised by factory-trained servicemen, and the provision of two days of formal training for three individuals on machine controls and operation. Technical specifications require the machine to be built to NFPA 79 standards and compatible with a 480V, 3PH, 60 HZ power system. Post-delivery, the contractor must perform functional accuracy tests according to ISO/ANSI standards, ensuring repeatability and positioning within +/- .0001”. The contract includes a 24-month warranty on materials and workmanship, a ten-year accuracy guarantee on the Linear Drive System, and strict support requirements, including a 36-hour on-site repair response time and 48-hour delivery for repair parts. Interested respondents must submit company information, SAM data, a capabilities statement, a rough-order-of-magnitude budgetary estimate, and a projected delivery schedule by November 13, 2026.
Machine Tool Manufacturing

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 334418
New
Federal
ENETX-MA4
Solicitation # FA910127QB002
Solicitation FA910127QB002 is a combined, firm-fixed-price procurement for the Department of the Air Force, specifically supporting the 704th Test Group and 746th Test Squadron at Holloman Air Force Base, New Mexico. The primary objective is the acquisition of manufactured commercial hardware to support the integration, maintenance, and troubleshooting of the Ultra High Accuracy Reference System and customer Units Under Test. The required deliverables include two ENETX-MA4-2F4 Converter Appliances, two ENETXCAB-MA4-J1-01 interface cable assemblies for power and MIL-STD-1553, and two ENETXCAB-MA4-J2-02 interface cable assemblies for ARINC-429. All equipment must be RoHS compliant and adhere to the Alta dt Hardware Manual. This procurement is a 100% Small Business Set-Aside for brand-name items, specifically requiring genuine OEM Alta dt parts; offers of alternate brands will be deemed technically unacceptable. Award will be granted to a responsible source that is technically acceptable and provides a fair and reasonable price, with a 10 percent price evaluation preference applied to HUBZone small business concerns. Delivery is required within 10 weeks from the date of award receipt, with shipping terms set as FOB Destination. The contract incorporates various FAR and DFARS clauses, including those regarding the Buy American program, safeguarding covered defense information, and prohibitions on certain procurements from the Xinjiang Uyghur Autonomous Region and the Maduro regime. Quotes must be submitted electronically by November 20, 2026, and must include a total firm-fixed-price quote and confirmation of active SAM.gov registration.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

5 days ago

DEADLINE

in 12 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS