Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous and Industrial Waste Disposal Services

Active

Federal

Response Deadline08/14/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Hazardous and Industrial Waste Disposal Services is a subcontract under a Small Business Set Aside designation, aimed at ensuring the compliant disposal of stator sections containing regulated materials such as insulating compounds or oils. The work must adhere strictly to all applicable federal, state, and local environmental regulations, with particular attention to the safe handling and disposal of hazardous substances to prevent environmental contamination and ensure regulatory compliance. The performance location is specified as Pickstown, and the solicitation falls under NAICS code 562910, which corresponds to hazardous waste collection and treatment services. The opportunity was posted on July 30, 2026, with a response deadline of August 14, 2026, at 7:00 PM. It is managed by the W071 Endist Omaha office under the Department of Defense and is restricted to small businesses as defined by the SBA. Although no point of contact or specific address details are provided, the procurement is accessible through the SAM.gov portal. Contractors are expected to demonstrate proven expertise in the handling and disposal of industrial hazardous waste, particularly within defense-related contexts, and must possess the necessary permits, certifications, and operational protocols to conduct work in full compliance with environmental laws.

General Info

Small business subcontract for hazardous waste disposal of stator sections in Pickstown under DOD, compliant with environmental regulations.

Agency

Department Of Defense → W071 Endist OmahaView Agency

NAICS

562910 - Remediation ServicesView NAICS

Place of Performance

Pickstown, SD, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 07:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W071 Endist Omaha

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W071 Endist Omaha

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Ensure compliant disposal of stator sections in accordance with federal, state, and local environmental regulations, potentially involving regulated materials such as insulating compounds or oils.

Similar Contracts

Same NAICS industry code

Civida - Request for Quotes - Biohazard Cleaning Services

Solicitation # AB-2026-05424

Civida is soliciting qualified contractors to provide biohazard clean-up services on an as-needed basis across properties in Edmonton and its surrounding areas. The request, identified by solicitation number AB-2026-05424, was posted on July 30, 2026, with responses due by September 3, 2026. Contractors must be equipped to handle a range of biohazard scenarios including bloodborne pathogens, chemical spill cleanup, trauma scenes, and other hazardous material removal in compliance with all applicable safety and regulatory standards. Services are expected to be delivered promptly and professionally, with contractors required to maintain appropriate certifications, insurance coverage, and trained personnel capable of responding to emergency situations at any time. The contract does not specify a fixed term or volume of work, meaning services will be engaged based on actual client needs as they arise. All work must be performed within the designated geographic area, primarily focused on the City of Edmonton in Alberta. Interested parties should direct inquiries to Karndeep Pannu, Procurement Specialist, via phone or email provided in the solicitation. Full details and submission guidelines are available through the official Alberta Purchasing portal link, and all proposals must be submitted by the stated deadline to be considered.

POSTED

DEADLINE

in about 1 month

COC-RWR-FY27-31100: Sink Undercoating Abatement

Solicitation # BD-26-1144-CAMBR-CAMBR-131923

The City of Cambridge is soliciting bids for Sink Undercoating Abatement under solicitation number BD-26-1144-CAMBR-CAMBR-131923, with the bid available for viewing and download via the City’s eProcurement Portal. The proposal submission deadline is August 13, 2026, at 7:00 PM, and the solicitation was posted on July 30, 2026. The work is to be performed within Cambridge, Massachusetts, specifically at locations where sink undercoating removal and abatement are required, and the project falls under the jurisdiction of the City of Cambridge as a state and local government entity. Shuo Wang is designated as the primary point of contact, serving in the role of Purchaser for the procurement. There is no set-aside classification specified, and the NAICS code is not provided, but the contract is open to qualified vendors meeting the technical and regulatory requirements for hazardous material abatement work. Bidders are expected to follow all applicable safety, environmental, and labor standards associated with the removal of sink undercoating materials.

CAMBR - City of Cambridge

POSTED

DEADLINE

Hazardous Materials Packaging and Labeling ServicesThe contract pertains to specialized packaging, hazard warning labeling, and preparation of Material Safety Data Sheets for an electronic accessory kit that may contain hazardous materials, ensuring compliance with safety and regulatory standards. Services are required to meet rigorous Department of Defense specifications, with performance location specified as New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation falls under NAICS code 562910, categorizing it as waste management and remediation services, and is structured as a subcontract opportunity under the ACTIVE DEVICES DIVISION. All proposals must be submitted by the deadline of August 10, 2026, with the solicitation posted on July 30, 2026, and accessible via the DIBBS portal. The requirement emphasizes accurate identification, containment, and documentation of hazardous components within the electronic kit to facilitate safe handling, transportation, and disposal.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Hazardous Materials Packaging and Labeling ServicesThe contract entails specialized handling, packaging, and labeling of hazardous and potentially radioactive materials in strict compliance with federal and defense regulations. All work must be performed to meet the rigorous safety and regulatory standards required for transporting and managing materials that pose significant risk to health, safety, and the environment. The services are classified as a subcontract under NAICS code 562910, indicating a focus on hazardous waste collection and treatment. Performance is required at the designated location in New Cumberland, Pennsylvania, with the zip code 17070-5002, and the contracting activity is under the Active Devices Division of the Department of Defense. The solicitation was posted on July 30, 2026, withResponses due by August 10, 2026, providing a tight window for qualified vendors to submit proposals. While no set-aside type is specified, the nature of the work demands certified expertise and adherence to stringent federal protocols, making experience with defense and hazardous materials compliance non-negotiable for potential subcontractors.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Hazardous Materials Packaging and LabelingThe contract requires comprehensive packaging, labeling, and preservation of hazardous materials in strict adherence to MIL-STD-129, DLA RP001, and applicable federal regulations. This includes proper containerization techniques and accurate hazard communication to ensure safety, compliance, and traceability throughout the supply chain. All work must meet rigorous Department of Defense standards for handling dangerous goods, with emphasis on durability, environmental protection, and clear identification of chemical risks and handling instructions. Performance of this subcontract is obligated at New Cumberland, Pennsylvania, with a response deadline of August 10, 2026, and the solicitation was posted on July 30, 2026. The North American Industry Classification System code 562910 indicates the work falls under Other Waste Management Services, reflecting the specialized nature of hazardous material management. The contracting entity is the Maritime Supply Chain under the Department of Defense, underscoring the critical role of this effort in supporting military logistics and safety protocols.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Hazardous Materials Handling and PackagingThe contract requires the proper packaging and labeling of a valve shipment in strict adherence to hazardous materials regulations, with specific prohibitions against the use of mercury and ozone-depleting substances throughout the manufacturing and packaging processes. Compliance with these environmental and safety standards is mandatory to ensure the shipment meets federal and international transportation requirements for hazardous goods. The work must be performed in accordance with applicable regulatory frameworks governing the handling of dangerous materials, with an emphasis on environmental protection and worker safety. This subcontract is issued by the Department of Defense through its DDSP NEW CUMBERLAND FACILITY and is categorized under NAICS code 562910, which pertains to other waste management services. The place of performance is designated as NEW CUMBERLAND with a ZIP code of 17070-5002. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026. There is no set-aside classification specified, and the contract is available through the DIBBS platform for interested parties to review and submit proposals.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Radioactive Materials Notification & Labeling ServicesThe contract requires specialized services for the handling, labeling, and advance notification of radioactive material shipments in full compliance with MIL-STD-129 and FAR 52.223-7, ensuring adherence to Department of Defense standards for packaging, marking, and documentation. All activities must be executed with precision to meet regulatory and safety requirements, with an emphasis on accurate labeling and timely communication prior to shipment arrival. The work is to be performed at Fort Hood, Texas, with a bid deadline of August 10, 2026, and is structured as a subcontract under the NAICS code 562910 for waste management and remediation services. The sponsoring agency is the Land Supply Chain under the Department of Defense, underscoring the mission-critical nature of the logistics and safety protocols involved.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Hazardous or Radioactive Materials Handling for Shipment

LAND SUPPLY CHAIN

POSTED

DEADLINE

Hazardous Materials Handling & Labeling ComplianceThis contract requires strict adherence to OSHA Hazard Communication standards and all relevant federal regulations concerning the labeling and safe handling of hazardous materials, particularly as they pertain to clips or their packaging. Compliance is mandatory and must be maintained throughout all stages of fulfillment, ensuring that all substance identities, hazards, and precautionary measures are clearly identified and documented according to federal mandates. The performance of this work is designated for Hill Air Force Base, Utah, with a zip code of 84056-5713, and the contractor must ensure that all materials and processes meet these safety and labeling requirements without exception. The contract, issued under the NAICS code 562910 for waste treatment and disposal services, is structured as a subcontract within the Department of Defense’s Maritime Supply Chain ESOC Buys initiative, administered by the agency named MARITIME SUPPLY CHAIN ESOC BUYS. It was posted on July 30, 2026, with responses due no later than August 10, 2026. There is no specified set-aside status, and the solicitation number is not provided, but the official procurement portal for submissions and inquiries is accessible via the linked DIBBS platform. Contractors must be prepared to demonstrate full compliance with all applicable regulatory frameworks as a condition of award and ongoing performance.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Hazardous Materials Handling and LabelingThe contract titled Hazardous Materials Handling and Labeling requires comprehensive support for the safe management, labeling, and documentation of hazardous materials used in preservation activities. It mandates strict adherence to the Hazard Communication Standard HAZCOM and the specific regulatory clause 252.223-7001 to ensure all handling procedures meet federal safety and compliance requirements. The work involves accurate identification, proper labeling, and thorough recordkeeping of hazardous substances to safeguard personnel and maintain regulatory alignment throughout the lifecycle of the materials. Issued as a subcontract under the NAICS code 562910 for waste management and remediation services, this solicitation is administered by the Fluid Handling Division of the Department of Defense. The response deadline is August 5 2026 with the solicitation posted on July 30 2026. The place of performance and exact location details are not specified but the work is expected to align with Defense Department protocols. All participants must be prepared to demonstrate proven experience in hazardous materials compliance and be capable of implementing documented procedures that meet the stringent standards of the contract.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Hazardous Materials Handling and ComplianceThe contract mandates strict adherence to hazardous materials regulations as outlined in NAVSEA 5100-003D, requiring compliance with mercury content restrictions, proper HAZCOM labeling for chemical hazards, and the use of shockproof containment measures to ensure safety during handling and transport. All activities must align with these technical standards to mitigate risks associated with hazardous substances in military operations. The subcontract is issued by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY, with performance required at the location in NEW CUMBERLAND, Pennsylvania, ZIP 17070-5002. It falls under NAICS code 562910 for waste treatment and disposal services and was posted on July 30, 2026, with a response deadline of August 10, 2026. The agreement is structured as a subcontract without a specific set-aside designation, and bids must be submitted through the designated DIBBS platform to meet procurement requirements.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Hazardous Materials Packaging and Labeling

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → W071 Endist Omaha

Same awarding agency

Recyclable Materials Processing (Copper/Steel Recovery)The contract involves processing stator sections to recover copper windings and steel laminations, with financial reimbursement tied to prevailing commodity market prices for these scrap materials. The work is classified as a small business set aside under SBA guidelines, specifically designated for total small business participation, and falls under NAICS code 331420 for primary metal manufacturing. Performance of the contract is required at Pickstown, with all processing activities expected to occur at this location. The solicitation was posted on July 30, 2026, and responses must be submitted by August 14, 2026. The contracting agency is the Department of Defense through W071 Endist Omaha, and the procurement is structured as a subcontract under the federal acquisition system. Financial recovery is contingent on the market value of the recovered copper and steel, making profit dependent on timely processing and market fluctuations during the contract term.

Copper Rolling, Drawing, Extruding, and Alloying

POSTED

DEADLINE

Flatbed Transportation and Hauling ServicesThe contract requires the safe and compliant transport of twenty-one stator sections from the Fort Randall Powerhouse in Pickstown, South Dakota, to off-site disposal or recycling facilities using DOT-compliant flatbed trucks capable of handling oversized and heavy industrial loads. All transportation must adhere to federal regulations for oversized cargo, including proper permitting, escort services if required, load securing protocols, and adherence to weight and dimensional restrictions on public roadways. The vendor must ensure the integrity of the components during transit and coordinate logistics to minimize disruptions and environmental impact. This is a Small Business Set Aside subcontract under NAICS code 484220, issued by the Department of Defense through W071 Endist Omaha, with a response deadline of August 14, 2026, and a posting date of July 30, 2026. The place of performance is Pickstown, South Dakota, and the solicitation is open exclusively to small businesses as defined by the SBA. Bidders are expected to demonstrate proven experience in transporting large-scale power generation components and possess the necessary equipment, insurance, and operational capacity to execute the move safely and on schedule.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Stator Cutting and Dismantling ServicesThe contract entails the precise cutting and dismantling of seven generator stators at the Fort Randall Powerhouse, with each stator divided into three sections for a total of 21 segments, requiring specialized expertise in handling large, complex electrical components under strict safety protocols. This work demands meticulous planning and execution to ensure structural integrity during disassembly, minimal risk to personnel and equipment, and compliance with all safety and environmental standards applicable to hazardous industrial operations. The contract is identified as a Small Business Set Aside under the NAICS code 238990, reserved exclusively for small businesses, with an expected deadline for proposals on August 14, 2026. Work will be performed exclusively at the Pickstown location associated with the Department of Defense's W071 Endist Omaha agency, and the opportunity is posted as a subcontract under a federal procurement vehicle. All interested parties must submit responses by the stated deadline to be considered, with no further details on pricing, timeline, or technical specifications provided beyond the scope of cutting and dismantling services.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Fort Randall Logistical Support and Stator Custody Transfer of Remaining Stators

Solicitation # W9128F26QA089

The US Army Corps of Engineers, Omaha District, is conducting market research through a sources sought notice to identify qualified small businesses capable of handling the logistical support and custody transfer of seven remaining generator unit stators located at Fort Randall Dam in Pickstown, South Dakota. This effort is designated as a Small Business Set Aside, total, under NAICS code 423930, ensuring priority consideration for small businesses with the capacity to manage the disposition of these large, specialized components. The solicitation, issued under number W9128F26QA089, was posted on July 30, 2026, with responses due by August 14, 2026, and is being managed by the Department of Defense through the Omaha District office located in Omaha, Nebraska. Point of contact for inquiries includes Brandie Murphy as the primary representative and Sara Edwards as the secondary contact, both reachable via their official USACE email addresses. All activities related to the custody transfer, transportation, and final disposition of the stators must be performed in coordination with the agency, with performance centered at the Fort Randall Dam site. Interested parties are directed to review the attached sources sought document for detailed requirements and submit responses through the SAM.gov portal linked in the posting. This action is strictly for market research purposes and does not constitute a solicitation for proposals or a commitment to award a contract.

Recyclable Material Merchant Wholesalers

POSTED

DEADLINE

SP-POL-CMP-INSPECT-NVL-PO 35

Solicitation # W9128F26QA062

This contract is for non-personnel services to conduct inspections and maintenance on Department of Defense aboveground storage tanks located at Fort Rucker, Alabama. The work includes the removal and proper disposal of remaining fuel, thorough cleaning of the tanks, replacement of wiper seals, and completion of an API-compliant internal inspection for six designated tanks. All tasks must be performed in accordance with established industry standards and safety protocols to ensure operational readiness and environmental compliance. The contract is specifically set aside for Service-Disabled Veteran-Owned Small Businesses under FAR 19.14, and the North American Industry Classification System code 541990 applies to this procurement. The solicitation is identified as SP-POL-CMP-INSPECT-NVL-PO 35 with solicitation number W9128F26QA062, posted on July 30, 2026, with responses due by August 31, 2026. The contracting office is the W071 Endist Omaha under the Department of Defense, with the physical office located in Omaha, Nebraska, and performance anticipated at a zip code area of 36362 in Alabama. Timothy Boyte serves as the primary point of contact, reachable via email and phone provided in the contract data. The opportunity is available for bidding through the SAM.gov portal.

All Other Professional, Scientific, and Technical Services

POSTED

DEADLINE

in about 1 month

Mackall AAF Obstruction Survey

Solicitation # W9128F26RA138

The contract seeks architectural and engineering services to conduct an airfield obstruction survey at Mackall Army Airfield located at Fort Bragg, North Carolina, focusing on one Class A IFR runway and one UAS runway. The selected firm will be responsible for identifying, documenting, and analyzing any obstructions that could impact flight safety and navigational accuracy, ensuring compliance with federal aviation standards. The solicitation, numbered W9128F26RA138, was posted on July 28, 2026, with responses due by August 5, 2026, and falls under NAICS code 541330 for architectural and engineering services. The contracting office is the U.S. Army Corps of Engineers, Omaha District, located in Omaha, Nebraska, and the point of contact is Brian Reynolds, reachable by phone or email for inquiries. The work will be performed on-site at the airfield, and no set-aside status has been designated for this opportunity.

Engineering Services

POSTED

DEADLINE

Wheeler AAF Obstruction Survey

Solicitation # W9128F26RA137

The contract solicits architectural and engineering services to conduct an airfield obstruction survey at Wheeler Army Airfield in Schofield Barracks, Hawaii, specifically targeting a Class A IFR Runway. The selected firm must deliver precise survey data to identify and document any obstructions that could impact aviation safety and navigational compliance under federal aviation standards. This work is critical for ensuring the airfield remains fully operational and meets all regulatory requirements for instrument flight operations. The solicitation, identified by number W9128F26RA137, was posted on July 28, 2026, with proposals due by August 5, 2026. It falls under NAICS code 541330 for architectural and engineering services and is managed by the Department of Defense through the Office of the U.S. Army Corps of Engineers in Omaha, Nebraska. All technical inquiries and communications should be directed to Brian Reynolds, the primary point of contact, via email or phone. The place of performance is located in Hawaii, and the contract requires on-site execution of the survey with no specified set-asides for small or disadvantaged businesses.

Engineering Services

POSTED

DEADLINE

Gavins Point Raw Water Intake Zebra Mussel Mitigation

Solicitation # W9128F26QA074

The U.S. Army Corps of Engineers, Omaha District, is soliciting proposals for the design and installation of a zebra mussel mitigation system at the Gavins Point Project in Crofton, Nebraska, with the solicitation closing on August 31, 2026. This effort is exclusively open to small businesses as defined by the SBA, with a size standard of $45 million in annual receipts under NAICS code 237110 for water and sewer line construction. The project requires the contractor to supply all labor, equipment, and materials necessary to install a comprehensive abatement system safeguarding the powerhouse’s raw water intakes and associated piping, including two local tank skids with integral spill containment, two pump skids for distribution, electrical power connections to distribution equipment, and integration with existing raw water flow meters. A mandatory site visit is scheduled for August 5, 2026, with further details outlined in the solicitation under FAR Clause 52.236-27. The contractor must begin work immediately upon contract award and complete all work within 210 calendar days of receiving the Notice to Proceed, though this timeline remains subject to adjustment after solicitation issuance. Project costs are estimated between $250,000 and $500,000. All inquiries must be submitted through ProjNet, as specified in the solicitation, and the performance location is Gavins Point Project at Crofton, Nebraska 68730. The contracting office is located at 616 Capital Ave, Omaha, NE 68102, with Brianna Wohlers listed as the primary point of contact for technical and procedural questions regarding the solicitation.

Water and Sewer Line and Related Structures Construction

POSTED

DEADLINE

in about 1 month

Gavins Point Crane Rail Replacement

Solicitation # W9128F26RA023

The U.S. Army Corps of Engineers Omaha District is preparing to issue a solicitation for the replacement of the crane runway rail at the Gavins Point Powerhouse Intake near Crofton, Nebraska, with the solicitation expected to be released on or about August 10, 2026, and responses due by September 29, 2026. The project entails the complete removal and installation of 328 feet of 80-ton gantry crane rail, to be aligned to CMAA 70 standards, including demolition of existing rails, clips, asphalt, base plates, and non-shrink grout, as well as replacement of approximately 80 percent of the concrete anchors based on imaging and condition assessments, with all anchors at joint bars replaced. The new anchors must be suitable for cracked concrete and seismic conditions, and the grout pockets will be refilled with two-component aliphatic polyurethane elastomer grout. Work must be sequenced to minimize downtime of the intake crane, typically progressing from one end of the dam to the other with a controlled transfer of the crane to the new rail upon completion of the final segment. The contractor will have 360 calendar days from the Notice to Proceed to complete all work, with an estimated project cost between one and five million dollars. The solicitation is unrestricted and open to both large and small businesses, with the primary NAICS code 238120 and a small business size standard of $19 million in annual revenue. A mandatory site visit is tentatively scheduled for August 26, 2026, with full details provided in the solicitation. All inquiries must be submitted through ProjNet, and performance will occur at the Gavins Point Project in Crofton, Nebraska, with the contracting office located in Omaha, Nebraska.

Structural Steel and Precast Concrete Contractors

POSTED

DEADLINE

CO₂ Cylinder Transportation and LogisticsThe contract involves the transportation of 123 CO₂ cylinders from the Gavins Point Powerhouse to an off-site facility for servicing, recertification, and refilling, with the subsequent return of the cylinders to their origin. The work is classified under NAICS code 484220, indicating it pertains to specialized freight trucking, and is structured as a subcontract under the Department of Defense through the W071 Endist Omaha office. The place of performance is designated as Crofton, Nebraska, with a ZIP code of 68730, and all logistics must comply with federal transportation and hazardous materials handling standards, given the nature of CO₂ cylinders as pressurized containers. Responses to this solicitation are due by August 24, 2026, at 7:00 PM, and the opportunity was posted on July 22, 2026. While no set-aside type or point of contact is specified, the contract demands precise coordination to ensure timely pickup, secure transit, proper handling during servicing, and reliable return of all cylinders. The successful contractor must demonstrate proven experience in hazardous materials transport, regulatory compliance, and logistics management for industrial gas systems, with an emphasis on safety, traceability, and schedule adherence to support ongoing operations at the Gavins Point Powerhouse.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supply of 3/4" Threaded CO₂ Hose AssembliesThe contract calls for the supply of 64 new hose assemblies with a 3/4 inch diameter, threaded ends, and approximately 15 inches in length, specifically designed for use in CO₂ fire suppression systems. These assemblies must meet exacting technical specifications to ensure compatibility and reliable performance within critical fire safety applications. The work is solicited as a subcontract under NAICS code 332994, indicating a focus on other fabricated metal product manufacturing, and is tied to a Department of Defense initiative managed by W071 Endist Omaha. Performance of the contract is required at Crofton, Nebraska, with a zip code of 68730, and all deliveries must be completed by the response deadline of August 24, 2026, at 7:00 PM. The solicitation was posted on July 22, 2026, providing potential bidders just over a month to prepare and submit proposals.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Kidde Model 4706 Valve Rebuild Services (Total)The contract involves the complete rebuild of 64 Kidde Model 4706 valves, requiring full disassembly, replacement of all worn or degraded components, precise reassembly, and rigorous functional testing to ensure full operational integrity. Every rebuilt valve must meet stringent quality standards and is subject to 100 percent inspection and acceptance by the Contracting Officer’s Representative and Quality Assurance teams before delivery. Work must be performed in accordance with approved technical specifications and quality control protocols to guarantee consistent performance and reliability under operational conditions. The solicitation is classified as a subcontract under NAICS code 811310, focusing on industrial and commercial repair and maintenance services. The performance location is designated as Crofton, Nebraska, with a zip code of 68730, and the contracting entity is the Department of Defense through W071 Endist Omaha. The opportunity was posted on July 22, 2026, with a firm response deadline of August 24, 2026, at 7:00 PM Eastern Time. All proposals must demonstrate capacity to execute the rebuilds within the required timeframe and comply with DoD quality and compliance standards.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE