Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Duty Pay Compliance Support

Active

Federal

Response Deadline07/30/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks qualified subcontractors to provide trained personnel for the handling of contaminated recyclables that involve hazardous duties, with strict adherence to SCA-mandated pay differentials and comprehensive safety protocols. All workers must be prepared to manage materials posing health or environmental risks, and compensation must reflect the elevated risk level as dictated by prevailing wage regulations under the Service Contract Act. The work is situated in Durham, North Carolina, with a focus on ensuring workplace safety, regulatory compliance, and operational integrity throughout the duration of performance. This is a total small business set-aside under SBA guidelines, reserved exclusively for small businesses as defined by the North American Industry Classification System code 562998, which covers other waste management services. The contracting office is the Department of Veterans Affairs through the 246-NETWORK Contracting Office 6, with proposals due by July 30, 2026, at 2:00 PM Eastern Time. The solicitation does not specify a formal solicitation number and lacks a designated point of contact, requiring interested parties to refer to the official SAM.gov posting for additional submission details and compliance instructions.

General Info

Small business set-aside for hazardous recyclables handling in Durham, NC, under SCA pay rules, VA contract due July 30, 2026.

Agency

Department Of Veterans Affairs → 246-NETWORK Contracting Office 6 (36C246)View Agency

NAICS

562998 - All Other Miscellaneous Waste Management ServicesView NAICS

Place of Performance

Durham, NC, 27705, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineJul 30

Submission deadline

Response Deadline

07/30/2026, 02:00:00 PM UTCin 1 day

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → 246-NETWORK Contracting Office 6 (36C246)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Veterans Affairs → 246-NETWORK Contracting Office 6 (36C246)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide personnel trained to handle contaminated recyclables involving hazardous duties, requiring SCA-mandated pay differentials and safety protocols.

Similar Contracts

Same NAICS industry code

Emergency Response and System RepairsThe contract titled Emergency Response and System Repairs requires immediate action to address critical system failures, leaks, or environmental releases, with a focus on rapid repair to restore essential services and mitigate environmental damage. Responders must be prepared to deploy quickly to emergency sites, execute time-sensitive repairs, and ensure compliance with safety and environmental standards to prevent further harm. This is a subcontract opportunity open to qualified entities capable of delivering high-speed response capabilities under urgent conditions. The solicitation was posted on July 24, 2026, with a response deadline of August 21, 2026, and is managed by the Department of Business, Economic Development, & Tourism in Hawaii. The North American Industry Classification System code is 562998, indicating it falls under other support services for waste management. The place of performance is in Hawaii, and while specific location details are not provided, responders must be equipped to operate across the state. The contract does not specify a set-aside type, and there is no designated point of contact listed for inquiries. Applicants must submit their proposals through the official portal by the deadline to be considered.

Department of Business, Economic Development, & Tourism

POSTED

DEADLINE

Surface Preparation and Debris ManagementThe contract involves the specialized preparation of timber surfaces for coating application through cleaning, solvent rinsing, and debris collection, with strict adherence to methods that preserve the integrity of historic wood. All work must be performed using non-damaging techniques that ensure the structural and aesthetic qualities of the timber are maintained throughout the process. The handling and disposal of debris, particularly when treated or contaminated, must comply with safety and environmental protocols to prevent harm to the surrounding environment or heritage value of the materials. This subcontract is issued under the NAICS code 562998 and is managed by the Vermont office of the Department of Economic Development. The solicitation was posted on July 24, 2026, with a formal response deadline of August 6, 2026, at 5:00 PM. No set-aside provisions or organizational type restrictions are specified, and the place of performance has not been detailed in the available data. All work must be carried out in accordance with industry standards for historic preservation, and interested parties must respond through the provided Vermont Business Registry link before the deadline.

Department of Economic Development

POSTED

DEADLINE

Emergency Response and On-Call MaintenanceThe contract seeks a small business to provide on-call emergency maintenance services for urgent sewer system issues including blockages, backups, and critical repairs within a remote park environment, requiring rapid response and deployment capabilities to ensure public safety and operational continuity. Services must be available 24/7 with the ability to mobilize quickly to isolated locations where standard infrastructure access is limited, and response times are critical to mitigating environmental and health hazards. This is a total small business set-aside under the SBA guidelines, specifically designated for small business concerns as defined by FAR 19.5, and the NAICS code 562998 applies to other support activities for waste management. The solicitation was posted on July 24, 2026, with proposals due by August 21, 2026, and the award will be administered by the Department of the Interior through its MWR OHIO(64000) office. Contractors must be prepared to operate in challenging, off-grid conditions and demonstrate proven experience in remote emergency response, equipment mobility, and compliance with environmental and safety protocols without reliance on urban utilities or logistical support networks.

Mwr OHIO(64000)

POSTED

DEADLINE

A&CC Catch Basin/Underground Piping CleaningThe Department of Labor, through its Office of Acquisition Services on behalf of the Mine Safety and Health Administration, is seeking a contractor to provide storm catch basin and associated underground piping cleaning services at the Approval & Certification Center in Triadelphia, West Virginia. The requirement is structured as a performance-based contract governed by a detailed Performance Work Statement that mandates complete removal of sediment and obstructions from all catch basins and piping to ensure zero deviation from flow thresholds, with inspection criteria requiring no sediment within one inch of the piping bottom and full accessibility for vacuum trucks. The work must be completed within 30 days of the start date using high-pressure water jets and a vacuum truck, and contractors must submit a Quality Control Plan electronically within 30 days of award and provide documentation of waste transport and disposal to both the Contracting Officer and Contracting Officer’s Representative. The solicitation is issued as a total small business set-aside under NAICS code 562998, with offers due by August 3, 2026, and will be awarded on a Lowest Priced Technically Acceptable basis, meaning the technically compliant offer with the lowest price will be selected. All offerors must have a valid Unique Entity Identifier, provide accurate representation of small business status, and comply with mandatory certifications including compliance with the Buy American Act, prohibitions on using covered telecommunications equipment, and disclosure of any joint venture partners. The contract includes specific clauses related to organizational conflict of interest, contractor personnel telework, mandatory DOL training for employees, and compliance with the Trafficking in Persons and text messaging while driving policies. Invoicing must be submitted electronically through the Department of Treasury’s Invoice Processing Platform, not WAWF, and payment inquiries should be directed to the Office of the Chief Financial Officer. The Contracting Officer’s Representative will be designated after award and will conduct 100% on-site inspection at the performance location. Contractors must be fully licensed and certified, safeguard government property, conserve utilities, and adhere to all OSHA, FISMA, and Privacy Act requirements. All proposals must reflect up-to-date SAM.gov information, and any material misrepresentation may lead to disqualification or termination. The contract has no specified monetary value as pricing details remain blank in the solicitation, making evaluation purely on price reasonableness among technically acceptable responses.

DOL - Cas Division 4 Procurement

POSTED

DEADLINE

Hydrojetting and Camera ServiceThe U.S. Department of the Interior, through the Office of the Museum and Water Resources in Ohio, is soliciting quotes for Hydrojetting and Camera Service at Ozark National Scenic Riverway under solicitation number 140P6426Q0111. This combined synopsis and solicitation, issued under FAR Part 12, is exclusively for small business concerns as a 100% total small business set-aside with NAICS code 562998 and a size standard of $16.5 million in annual revenue. The requirement mandates that all offerors possess an active Unique Entity Identifier and be currently registered in the System for Award Management (SAM) with an active status as of the quote submission deadline and throughout contract performance. Quotes must be submitted by 4:00 PM Eastern Time on August 21, 2026, with an anticipated award date in late August 2026. The point of contact for inquiries is Jarrod Brown, reachable via email or phone, and all relevant provisions and clauses are incorporated by reference and available through acquisition.gov. Registration support is available through the National APEX Accelerator Alliance.

Mwr OHIO(64000)

POSTED

DEADLINE

Soil and Drilling Mud Storage and HandlingThe contract requires the temporary storage of soil cuttings and drilling mud in properly labeled 55-gallon drums at a designated staging area in San Diego for a period not exceeding 60 days. All storage activities must strictly adhere to applicable environmental regulations to ensure safe handling, containment, and prevention of contamination. The materials must be clearly marked and managed in compliance with state and federal standards for hazardous and non-hazardous waste disposal. This subcontract is tied to a project under the San Diego Unified Port District and falls under NAICS code 562998 for other waste management services. The work is to be performed on-site in San Diego, with no specified set-aside classification or formal point of contact provided. The posting date indicates the opportunity was made available in July 2026, and further details may be accessible through the provided link to the CEQA Net project database.

San Diego Unified Port District

POSTED

DEADLINE

SWMA - Porter PottiesThe District of Columbia Department of Public Works is forecasting a future opportunity to rent portable restrooms, commonly referred to as porta potties, for use at various locations across the city. This forecast outlines a potential procurement requiring the provision of temporary sanitation facilities to support public events, construction projects, or other city-managed activities. The solicitation is not yet active, and no specific contract award date, detailed requirements, or quantities have been released. The opportunity is categorized as a forecast with no set-aside designation, indicating it is open to all qualified vendors without restriction based on small business, minority-owned, or other classifications. The place of performance will be at multiple sites throughout the District of Columbia, and while no point of contact information is listed, interested parties can access further details through the provided public contracts portal link.

Public Works (DPW)

POSTED

DEADLINE

FY2026/DBH/SEH/NSD/Grease Trap/Line Jetting/Grease RemovalThe contract covers the annual maintenance and cleaning of grease traps and associated drainage lines originating from the SEH facility, ensuring proper functioning and compliance with sanitation standards. The vendor is responsible for the complete removal of grease and oil buildup from the traps and all connecting pipes, as well as the cleanup of all excess oil residues found on the grounds surrounding the facility to prevent environmental contamination and maintain safe, sanitary conditions. This service is scheduled under the fiscal year 2026 procurement plan by the District of Columbia’s Behavioral Health agency, with no set-aside designation or NAICS code specified. The work is forecasted to be performed at the SEH location, and while no detailed point of contact or specific performance timeline is provided, the posting date indicates this is a planning notice for services to be executed in the upcoming fiscal year.

Behavioral Health (DBH)

POSTED

DEADLINE

Catch Basin Cleaning & Disposal ServicesThe contract calls for the complete servicing of catch basins including all labor, tools, and equipment needed to gain access and perform thorough cleaning operations within the specified area in Dover, Massachusetts. All waste materials generated during the cleaning process must be properly collected, transported, and disposed of in accordance with environmental and regulatory standards. The work is to be carried out at locations along Dedham Street in Dover with a zip code of 02030, and the contractor is responsible for ensuring all operations comply with local, state, and federal requirements regarding stormwater management and hazardous material handling. The solicitation was issued by the Massachusetts Public Works Department under reference number BD-24-1709-PWD-PWD-131665 and is open to qualified bidders with a response deadline of August 6, 2026, at 4:00 PM. The primary point of contact for the contract is Kevin McCabe, Purchaser, and all inquiries should be directed through the official Commbuys portal. The project is classified under a state and local government agency procurement with no specific set-aside designation, and performance must be completed in the designated location without deviation.

PWD - Public Works Department

POSTED

DEADLINE

Aquatic Debris Removal and Waterway CleanupThe contract for Aquatic Debris Removal and Waterway Cleanup encompasses the removal of submerged and shoreline debris including abandoned vessels, lost or discarded fishing gear, general trash, and storm-related wreckage from lakes and their tributaries. Work will be conducted using waterborne vessels and dedicated shoreline crews to ensure thorough cleanup across targeted waterways. The effort is aimed at restoring environmental integrity and improving navigational safety in affected areas. This subcontract is posted under NAICS code 562998 and managed by the Department of Defense through the W072 Endist Louisville office. The opportunity was made available on July 23, 2026, with a firm response deadline of August 7, 2026, at 2:00 PM. The primary place of performance is located in Sweden, though specific regional details within the area are not provided. All work must be executed in alignment with federal contracting standards, with no set-aside designation specified for small or disadvantaged businesses.

W072 Endist Louisville

POSTED

DEADLINE

Dust Control and Air Quality Mitigation ImplementationThe contract titled Dust Control and Air Quality Mitigation Implementation requires the installation and ongoing maintenance of dust suppression systems including water sprays, chemical binders, and wind fences to ensure compliance with air quality regulations. The work is scoped to address particulate matter emissions in the Bakersfield area under Kern County’s oversight, with the primary objective of mitigating airborne dust that impacts public health and environmental standards. All systems must be designed and operated to meet or exceed current regulatory requirements and be maintained in functional condition throughout the contract term. This is a subcontract under NAICS code 562998, indicating it falls under other environmental cleanup services, and was posted on July 23, 2026. The place of performance is specifically located in Bakersfield, California, and the project is tied to a larger environmental compliance initiative linked to the CEQANet portal. The contract does not specify details on funding, duration, or performance metrics, but the focus is on long-term operational effectiveness of dust control infrastructure, requiring technical expertise in both installation and preventive maintenance to sustain regulatory compliance.

POSTED

DEADLINE

Trade-In Equipment Removal and Site CleanupThe contract involves the safe removal, packing, and proper disposal of a decommissioned Leica SP8 microscope located at the National Institutes of Health NICHD facility in Bethesda, Maryland, with a zip code of 20892. This work includes all necessary procedures to dismantle the equipment without risking damage to surrounding infrastructure, secure packaging for transport, and compliant disposal according to environmental and safety regulations. The contractor is also responsible for thorough site cleanup after removal, ensuring the area is left in a condition suitable for the installation of new equipment. All activities must be completed by the response deadline of July 31, 2026, and the work is classified as a subcontract under NAICS code 562998, which covers other environmental cleanup services. The entity responsible for issuance is the Department of Health and Human Services through its NIH NICHD office, though no specific point of contact or set-aside details are provided.

National Institutes Of Health Nichd

POSTED

DEADLINE

More opportunities from Department Of Veterans Affairs → 246-NETWORK Contracting Office 6 (36C246)

Same awarding agency

H961--Triennial Electrical Breaker Testing and Repairs Stage 2

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 8 hours ago

DEADLINE

J063--LYNX PANIC ALARM SERVICE AGREEMENTThe contract solicitation 36C24626Q0790-1 for the LYNX Panic Alarm Service Agreement is a total small business set-aside under FAR 19.5, targeting small business vendors to provide one year of maintenance and technical support services from July 31, 2026, through July 30, 2027. The procurement is a firm fixed price service contract administered by the Department of Veterans Affairs, Network Contracting Office 6 in Hampton, Virginia, with the contracting officer being Jerry L. Mann and the contract specialist Ruth A. Morris serving as the primary point of contact. The scope of work centers on technical assistance, software troubleshooting, command syntax guidance, and priority-based support via a dedicated portal during normal business hours, with no physical goods or delivery requirements indicated. Evaluations will be conducted on a best-value basis, prioritizing technical capability over price and past performance, with award not based on lowest price technically acceptable. The solicitation mandates that offerors submit a technical proposal as a single PDF and a pricing submission via SF-1449, with all submissions required by email to Ruth Morris no later than July 28, 2026, and questions limited to a July 23, 2026 deadline. All offerors must hold a valid Unique Entity Identifier and self-certify as a small business, with eligibility extended to SDVOSBs, VOSBs, WOSBs, and HUBZone firms, requiring SDVOSB/VOSB certification through the SBA’s portal. The contract incorporates numerous FAR and VAAR clauses, including those on whistleblower rights, trafficking in persons, employee eligibility verification, paid sick leave, DEI discrimination compliance, privacy training, and security prohibitions. Personnel must obtain PIV credentials under VA Directive 0710 and undergo Tier 3 or Tier 5 background investigations if accessing VA systems or facilities. Invoicing is exclusively through the VA’s EIPP system, with payments processed via EFT. While the estimated ceiling value is $25 million, no specific pricing data is provided in the CLIN table, and no options or delivery specifications beyond the one-year performance period are included. Section C contains no performance work statement, and Section B lacks populated pricing figures, meaning technical compliance and past performance dominate the evaluation. Offerors must also submit completed VA Section 508 accessibility checklists if affirming compliance, and they are subject to

Security Systems Services (except Locksmiths)

POSTED

about 8 hours ago

DEADLINE

Z2DA--565-26-110 REPLACE AHU 34The solicitation for Project 565-26-110, Replace Air Handling Unit #34, under solicitation number 36C24626Q0827, is a replacement for the previously issued 36C24626Q0784 due to a technical error that prevented amendments. It is a Service-Disabled Veteran-Owned Small Business Set Aside procurement under NAICS code 238220, targeting commercial and institutional building construction, with responses due by August 19, 2026 at 9:30 PM Eastern Time. Work is scoped to the full removal and replacement of Air Handling Unit #34 at a Department of Veterans Affairs facility in Fayetteville, North Carolina, including associated modifications to HVAC, electrical, and plumbing systems, with implied requirements for commissioning, testing, and operational verification. The contract mandates compliance with the Buy American Act, requiring certification of domestic materials and potential justification for exceptions, as well as adherence to Davis-Bacon Act prevailing wage rates and Executive Orders 13658 and 13706 governing minimum wage and paid sick leave for service workers. The solicitation is issued by the 246-NETWORK Contracting Office 6 of the Department of Veterans Affairs, located in Hampton, Virginia, with Daniel Spaulding listed as the contracting officer. While the SF-1442 form is referenced and suggests a fixed-price contract structure, detailed pricing, CLIN structures, period of performance dates, FOB terms, packaging specifications, and contract administration details such as payment offices or invoice methods are not provided in the available documentation. All pricing sections, including labor and material cost breakdowns, remain placeholder-filled, indicating that actual bid submissions will contain the required financial details. Offerors must be certified as service-disabled veteran-owned small businesses and are required to complete the Buy American Act certification form provided as Attachment D, but no other socioeconomic certifications or completed offeror representations are present in the solicitation materials.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 8 hours ago

DEADLINE

R699--Durham VAMC Recycle Contract

Solid Waste Collection

POSTED

about 8 hours ago

DEADLINE

Q517--Pharmacy Benefits Management

Pharmacy Benefit Management and Other Third Party Administration of Insurance and Pension Funds

POSTED

about 8 hours ago

DEADLINE

Solid Waste Removal Services

POSTED

about 8 hours ago

DEADLINE

Cabinet, Sink and Waste Units (Types 1–3) SupplyThe contract seeks the supply of three specialized shielded cabinets, each integrated with sinks and waste disposal systems, specifically engineered for the safe handling, decontamination, and drainage of radioactive liquids and materials. These units, designated as Types 1–3, are designed to meet stringent safety and regulatory standards for use in environments where radiological contamination is a concern, ensuring secure containment and efficient waste management. The equipment must be constructed with shielding materials that provide adequate protection against radiation exposure while maintaining functionality for routine laboratory or medical procedures involving radioactive substances. This is a subcontract issued under a Total Small Business Set-Aside, designated by the NAICS code 339113, and managed by the Department of Veterans Affairs through the 246-NETWORK Contracting Office 6. The opportunity was posted on July 27, 2026, with submissions due by 2:00 PM Eastern Time on July 30, 2026. The place of performance and contact details are not specified, but all units must be delivered and installed in compliance with federal safety and procurement regulations. Interested small business vendors must respond within the narrow window to qualify for this highly specialized procurement focused on mission-critical radiation safety infrastructure.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

L-Block Shield SupplyThe contract is for the supply of two L-shaped lead shields designed for directional radiation protection in nuclear medicine areas, offering partial shielding for rooms or equipment to enhance safety in radiological environments. These shields are essential for minimizing unnecessary radiation exposure to personnel and patients while maintaining operational efficiency in medical imaging and therapy settings. The solicitation is issued as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration may bid, ensuring opportunities for smaller enterprises within the federal contracting landscape. The North American Industry Classification System code 332312 indicates the work falls under the category of Metal Window and Door Manufacturing, reflecting the precision fabrication and shielding material expertise required. The contract was posted on July 27, 2026, with proposals due by 2:00 PM on July 30, 2026, under the authority of the Department of Veterans Affairs through the 246-NETWORK Contracting Office 6. The place of performance and other logistical details are not specified, but delivery and installation are expected to align with the needs of nuclear medicine facilities under VA oversight.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Decay & Storage Cabinet SupplyA lead-lined cabinet is being procured for the temporary storage of radioactive materials to ensure safe containment during decay periods until radiation levels fall to acceptable limits. The cabinet must meet stringent safety and shielding standards to protect personnel and the environment, designed specifically for use in medical or research settings where radioactive isotopes require controlled storage. This subcontract is a total small business set-aside under the SBA program, restricting eligibility to small businesses as defined by the NAICS code 339113, which covers medical equipment and supplies manufacturing. The opportunity was posted on July 27, 2026, with a response deadline of July 30, 2026, at 2:00 PM, managed by the Department of Veterans Affairs through its 246-NETWORK Contracting Office 6. Performance is expected to occur at an unspecified location under the purview of the VA, with all requirements centered on the delivery of a compliant, shielded storage unit that adheres to regulatory safety protocols for radiological materials.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

Lead Brick Cave Assembly and SupplyThe contract is for the supply and configuration of modular lead bricks to construct a shielded enclosure, known as a lead brick cave, designed to provide temporary or permanent radiation isolation for high-radiation work areas. The lead bricks must be precisely engineered and assembled to ensure optimal shielding effectiveness, meeting strict safety and regulatory standards for radiation containment. This is not a procurement of raw materials but a turnkey solution requiring expert installation and validation to guarantee structural integrity and radiological safety under operational conditions. This subcontract is a total small business set-aside under the SBA program, reserved exclusively for small businesses as defined by the SBA size standards for NAICS code 332312, which covers fabricated metal product manufacturing. The solicitation was posted on July 27, 2026, with responses due by July 30, 2026, indicating a fast-turnaround procurement cycle. The contracting office is the 246-NETWORK Contracting Office 6 under the Department of Veterans Affairs, and while specific performance location details are not provided, the work is intended for use in VA medical or research facilities requiring high-level radiation shielding. The nature of the requirement suggests specialized technical expertise in radiation protection engineering and modular assembly systems.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

PET Shielded Sharps Container SupplyThe contract is for the supply of a lead-shielded container specifically designed for the safe disposal of radioactive sharps generated during PET imaging procedures. The container must effectively prevent radiation leakage, ensure compliance with safety standards, and facilitate proper decontamination practices to protect personnel and the environment. Requirements emphasize robust shielding integrity, durable construction, and usability in clinical settings where radioactive waste handling is routine. Delivery must meet strict operational and safety benchmarks to support healthcare facilities managing radiopharmaceutical materials. This is a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to bid, reinforcing support for small business participation in federal contracting. The North American Industry Classification System code 339113 indicates the product falls under medical equipment and supplies manufacturing. The solicitation was posted on July 27, 2026, with a rigid response deadline of July 30, 2026, at 2:00 PM. The contracting office is the 246-NETWORK Contracting Office 6 under the Department of Veterans Affairs, and while specific performance location and point of contact details are not provided, all submissions must adhere to federal procurement rules and timelines as outlined by SAM.gov.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

PET Unit Dose Cabinet SupplyThe contract calls for the supply of a lead-shielded cabinet designed for the secure storage and handling of PET radiopharmaceutical doses, ensuring compliance with strict radiation safety protocols and decontamination requirements. The equipment must meet industry standards for shielding integrity, material durability, and operational safety in clinical nuclear medicine environments, with particular emphasis on minimizing radiation exposure to personnel and preventing cross-contamination during routine use and maintenance. This is a small business set-aside subcontract under the SBA program, exclusively available to small businesses, with a NAICS code of 339113 for medical equipment and supplies manufacturing. The solicitation was posted on July 27, 2026, with a firm response deadline of July 30, 2026, at 2:00 PM. The contracting office is the 246-NETWORK Contracting Office 6, operating under the Department of Veterans Affairs, though specific performance location and point of contact details are not provided. Bidders must ensure full alignment with federal radiation safety and procurement standards to qualify for award.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE