Top

Hazardous Material Labeling and Compliance Services

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

541690 - Other Scientific and Technical Consulting ServicesView NAICS

Place of Performance

FPO, AE, 09645-0010, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Provide OSHA-compliant hazard warning labels and safety data sheets (SDS) for the supplied component under DFARS 252.223-7001.

Similar Contracts

Same NAICS industry code

NAICS: 541690

New

Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction

Solicitation # C2305

Elsinore Valley Municipal Water District is soliciting professional design, bidding support, and engineering services for the replacement of the existing Corydon groundwater production well with a new facility on the same site, utilizing existing transmission infrastructure to maintain and enhance potable water production. The project, funded in part by a U.S. Department of the Interior Bureau of Reclamation WaterSMART Planning and Project Design Grant, requires comprehensive engineering services across two phases: Phase 1 involves civil site design, technical specifications, and line-bid items for drilling and abandoning the old well, including full-time construction management oversight and bidding assistance; Phase 2 covers architectural, structural, mechanical, electrical, and instrumentation design for equipping, testing, and commissioning the new wellhead facilities, along with continued engineering support during construction. The selected consultant must deliver final 100% design submittals including signed and stamped plans, calculations, permit documentation, an operations plan, a probable cost estimate, and a complete bid schedule, while also providing ongoing services such as response to RFIs, evaluation of change orders, shop drawing reviews, commissioning support, operator training, and record drawing development. All work must comply with Riverside County and California State Water Resources Control Board regulations, federal grant requirements including Good Faith Effort and monthly reporting, and the Buy America provisions under 2 CFR Part 184 and the Build America Act. The solicitation emphasizes the use of DBE, MBE, and WBE firms in key service areas including hydrology/hydraulic modeling, structural and electrical engineering, geotechnical investigation, and utility potholing. Proposals are evaluated on a weighted basis—qualifications and experience (25%), understanding of project and approach (25%), scope and schedule (20%), innovation (10%), cost (10%), and overall proposal quality (10%)—with the award based on demonstrated competence, not lowest price. The successful respondent must submit detailed cost proposals broken down by task with all hourly rates and incidental costs, and will be subject to a negotiated not-to-exceed dollar limit. Payment will be made monthly via the Department of Treasury ASAP system within 45 days of invoice approval, with strict adherence to federal requirements including audit thresholds of $750,000 in federal spending, whistleblower protections, conflict of interest disclosures, drug-free workplace standards, and trafficking in persons prohibitions. All proposals must be submitted via the PlanetBids portal by 10:00 a.m. local time on

TKE Engineering, Inc.

POSTED

DEADLINE

Judith Landing State Park Interpretation Plan

Solicitation # StateOfMontana-FWP-27-0012

Montana Fish, Wildlife & Parks is seeking a qualified interpretive planning consultant to develop a comprehensive interpretive plan for Judith Landing State Park, building upon an existing draft framework to guide future visitor engagement, educational programming, and phased implementation of interpretive media. The consultant will be responsible for refining the conceptual vision, creating a site-specific interpretive concept plan, and delivering actionable, prioritized recommendations that align with the park’s natural and cultural resources. This includes translating interpretive goals into tangible design elements and implementation strategies that enhance the visitor experience while ensuring long-term feasibility and resource compatibility. All proposals must be submitted via the eMACS vendor portal by the deadline of August 20, 2026, following the specified instructions and procedures outlined in the solicitation. Applicants are required to register as vendors, upload responses as attachments, and adhere to all technical requirements detailed in the scope of work and eMACS Vendor Handbook. Questions regarding system functionality or submission processes should be directed to the eMACS Help Desk, while inquiries about the solicitation itself should be addressed to Dani Lindeman at dlindeman@mt.gov. The contract is open to qualified consultants under a state procurement process, with no set-aside designation, and performance will be centered on Judith Landing State Park in Montana.

POSTED

DEADLINE

R425--Life Safety Drawings

Solicitation # 36C26126Q0995

The Department of Veterans Affairs, through its Network Contracting Office 21, has issued a sources-sought announcement for Life Safety Drawings under solicitation number 36C26126Q0995, exclusively set aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) as defined under FAR 19.14 and NAICS code 541690, with a small business size standard of $19 million in annual revenue. The work involves conducting on-site surveys at five buildings—2, 22, 22A, 24, and 32—at the VA Central California Health Care System in Fresno, California, to produce updated, code-compliant Life Safety Plans that reflect current as-built conditions. Deliverables include an AutoCAD DWG file and a corresponding PDF version of the plans, along with a Life Safety Code Summary & Legends document detailing occupancy classifications, fire and smoke barriers, sprinkler coverage, smoke compartments, hazardous storage areas, and suite boundaries per NFPA 101, OSHA guidelines, HCSM directives, and other applicable accreditation standards. All work must be coordinated with and approved by the Contracting Officer’s Representative, whose decisions resolve any conflicts between standards. Offerors must be registered in SAM with a valid Unique Entity ID and, if claiming SDVOSB status, must also be certified in the SBA’s VetCert portal. Compliance with FAR 52.219-14 and 52.219-27 requires that at least 50% of the contract’s personnel costs be performed by the prime contractor’s own employees, with full disclosure of in-house versus subcontracted work required. Contractors must provide their own tools and materials, wear both VA-issued temporary security badges and company identification while on-site, and adhere to strict access restrictions that prohibit connection to VA networks or systems. No IT accreditation is required. Work outside normal hours or involving utility shutdowns requires prior written authorization, with shutdown requests submitted at least 21 days in advance. The initial performance period is 90 days from the Notice to Proceed, and offers must include a price estimate for five potential one-year option periods. Proposals must be submitted by July 24, 2026, at 10:00 a.m. Pacific Time via email to Cynthia Diezel, Contract Specialist, and must include the required DWG and PDF Life Safety Plans. This announcement is

261-NETWORK Contract Office 21 (36C261)

POSTED

DEADLINE

Sources Sought - IHS P4 Program Support Contract

Solicitation # IHS1529527

The Indian Health Service is conducting market research through a Sources Sought Notice for the P4 Program Support Contract to evaluate industry capabilities in supporting the Produce Prescription Pilot Program, which aims to improve health outcomes for American Indian and Alaska Native communities by increasing access to fruits, vegetables, and traditional foods through structured food interventions integrated into healthcare settings. This initiative is led by the Division of Diabetes Treatment and Prevention and seeks to determine whether such models can effectively reduce food insecurity and enhance dietary health, ultimately leading to measurable clinical improvements. The notice is not a solicitation or binding commitment but is intended to inform future procurement decisions, including potential set-asides, based on responses received from qualified entities. Responses are due by August 14, 2026, and should be submitted in reference to solicitation number IHS1529527, with the North American Industry Classification System code 541690 applying to the effort. The office handling the procurement is the Division of Acquisitions Policy Headquarters under the Department of Health and Human Services, located in Rockville, Maryland, and primary points of contact for inquiries include Natasha Bitsoi at Natasha.Bitsoi@ihs.gov. The performance location is in Maryland, and all information must be submitted through the official SAM.gov portal. The government encourages eligible entities to respond with detailed information on their capacity to deliver services aligned with the program’s goals, ensuring the development of an effective and culturally appropriate procurement strategy.

Division Of Acquisitions Policy Hq

POSTED

DEADLINE

Consulting Services Cardiologist

Solicitation # 0000039958

The Department of Health Care Access and Information’s Healthcare Analytics Branch is seeking a consulting cardiologist to support the California Cardiovascular Outcomes Reporting Program, which is mandated by state law to annually publish risk-adjusted outcomes reports for hospitals performing coronary artery bypass graft surgery. The program relies on clinical data submitted by approximately 124 licensed California hospitals through the online Cardiac Online Reporting for California system, which aligns closely with the Society of Thoracic Surgeons Adult Cardiac Surgery Database in its data structure. The consultant will provide expert guidance on interpreting data elements from both the STS ACSD and CCORP systems, ensuring accurate analysis and proper understanding of patient medical records underlying the outcomes reports. The solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026, and is open to qualified professionals through the California eProcurement system. The position requires deep familiarity with cardiac surgery data standards and clinical documentation to support the state’s reporting obligations. All work will be performed within California, and inquiries should be directed to Victor Baker at victor.baker@hcai.ca.gov. There is no set-aside designation specified for this contract, and it is open to eligible consultants regardless of business size or category.

Health Care Access and Informa

POSTED

DEADLINE

Hazardous Material Compliance & SDS Preparation

POSTED

DEADLINE

Hazardous Materials Compliance and Labeling Services

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract entails the provision of hazardous materials identification, safety data sheet management, and compliant labeling services specifically for valve shipments, ensuring full adherence to OSHA and Department of Defense regulations. The work involves accurate classification of hazardous substances, maintaining up-to-date SDS documentation, and applying correct labeling that meets federal safety standards for transportation, handling, and storage. All activities must align with the stringent requirements of the Defense Logistics Agency under the Department of Defense to guarantee operational safety and regulatory compliance across military supply chains. This subcontract is solicited under NAICS code 541690 for other scientific and technical consulting services and is open for response until August 17, 2026. The place of performance is designated as FPO with ZIP code 09587, indicating operations are tied to overseas or military postal locations. The contract is issued by the Defense Logistics Agency and is part of broader efforts to standardize hazardous materials handling within DoD logistics networks, though no set-aside provisions are specified and no point of contact details are provided in the solicitation. Interested parties must submit proposals through the DIBBS portal before the deadline.

Defense Logistics Agency

POSTED

DEADLINE

Hazardous Materials Compliance and Labeling

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling Services

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Hazardous Materials Compliance & DocumentationThe contract mandates the preparation and submission of Material Safety Data Sheets and hazard warning labels for a reflective coating compound, ensuring full compliance with OSHA and Defense Logistics Agency regulations. All documentation must accurately reflect the chemical composition, health and safety hazards, and proper handling procedures for the compound, aligning with federal standards for hazardous materials communication. The work is scoped as a subcontract under NAICS code 541690, with performance to be carried out at FPO, 09645-0001, emphasizing the critical nature of accurate and timely documentation for military supply chain safety. The solicitation was posted on August 4, 2026, with a strict response deadline of August 10, 2026, indicating a prompt turn-around expectation. No set-aside designation is indicated, meaning the contract is open to eligible contractors without preference for small businesses or other categories. The issuing agency is the Department of Defense through the Defense Logistics Agency, underscoring the defense-related context and the non-negotiable requirement for regulatory adherence. Contractors must deliver compliant MSDS and labeling materials without delay, as failure to meet these requirements could disrupt procurement logistics and compromise safety protocols across military installations.

Defense Logistics Agency

POSTED

DEADLINE

Hazardous Materials Compliance and SDS Management

ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 12 days

View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

Solicitation # SPE7M0-26-Q-1147

This contract specifies the procurement of cold-rolled low-carbon steel strip, compliant with ASTM A109/A109M and SAE AMS2807C standards, measuring 0.0625 inches thick by 3 inches wide, in whole-foot lengths between 8 and 16 feet, with a weight of 0.638 pounds per foot and Edge Type No. 2. The material must be supplied as stripped metal with continuous identification markings on each unit, including the DLA contract delivery order number, NSN, specification revision, alloy and grade, manufacturer’s name, heat and lot number, and exact dimensions. Markings are required to be legible, waterproof, and applied via stamping or stenciling without contaminating the product; adhesive labels are permitted for bars, tubes, and shapes under 0.250 inches in nominal OD, while tags are acceptable for wire. A complete Certificate of Quality Compliance, or mill certification, must accompany every shipment and be submitted to the DLA Troop Support Contracting Officer. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD) as mandated by DLA Troop Support, and any deviation from this requirement constitutes a non-compliant bid with potential criminal penalties. Packaging and marking must conform to MIL-STD-2073-1E, MIL-STD-129, and ASTM A700, with special codes Z and ZZ for preservation and labeling. All items must be shipped in full-foot increments only, and shipments must exclude parcel post, using instead the fastest traceable freight method to the designated Puget Sound Naval Shipyard address. The contract is a firm-fixed-price agreement with zero variance allowance, destination inspection and acceptance, and FOB origin terms. Delivery is required within 30 days after award, and all technical data, including the CDRL-METALSCERT, must align with DLA’s Master List of Technical and Quality Requirements. Failure to meet any specification, including packaging, marking, or material certification, is grounds for rejection.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

DEADLINE

TAPE, INSULATION, ELECTR

Solicitation # SPE7M0-26-T-031K

This contract specifies the procurement of electrical insulation tape meeting MIL-I-19166C revision C dated 02/26/2021, with a unit of issue of 1 RO equaling 108 feet, for a total quantity of 1,200 ROs. The item is classified as a commercial item and carries a shelf life of 12 months from manufacture, non-extendable, unless stored under controlled conditions of 50°F to 80°F and less than 75% relative humidity, in which case it may be inspected and re-certified up to a maximum of five years. It is designated as hazardous under HMIC code P, requiring full compliance with Safety Data Sheet (SDS) submission standards including hazard labels and a completed transmittal form to dscrchempol@dla.mil. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129R, with palletization conforming to DLA packaging requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required for acceptance unless otherwise directed; unspecified attributes are treated as major. The tape must qualify under QPL-19166-30 revision 30 and comply with all referenced technical and quality requirements from the DLA Master List. Delivery is FOB origin with a five-day delivery window to Pearl Harbor Naval Shipyard, Hawaii, and requires full compliance with DLA procurement notes for transportation and freight. The NSN is 5970-00-612-8492 with a required delivery date of July 31, 2026, and all documentation must reflect current DLA unit of issue and marking specifications.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M0-26-T-031Q

This contract pertains to the procurement of one elbow hose, identified by NSN 4730016175913 and part number FS2702-12-12-FG from Brennan Industries, with a total quantity of one unit. The item is designated as a critical application component, and all materials must strictly comply with DLA’s Master List of Technical and Quality Requirements, which take precedence over any other standards including ASTM D3951 and MIL-STD-129 for packaging and labeling. The use of Class I ozone-depleting chemicals is explicitly prohibited, and any alternative substitutes must be pre-approved unless already authorized under the specifications. Delivery is required within five days of contract award, with FOB origin terms, no variance in quantity allowed, and inspection and acceptance occurring at the destination. Packaging must adhere to DLA’s packaging requirements, including palletization and labeling per MIL-STD-129, with unit of issue and quantity per unit pack exactly as specified. Shipment must be sent via traceable freight methods, excluding parcel post, to the designated delivery point at 547 Philadelphia Avenue, Reading, PA, under RDD/ NMCS shipment directives. The contract number is SPE7M0-26-T-031Q, with a required delivery date of July 15, 2026, and the solicitation was posted on August 5, 2026, with responses due by August 17, 2026. The item falls under NAICS code 332919 and is procured by the Department of Defense through the Maritime Supply Chain ESOc Buys office.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M0-26-T-031L

The contract pertains to the procurement of 8 machine bolts, identified by NSN 5306-01-507-7094 and part number 60-01-3745A, issued under solicitation SPE7M0-26-T-031L by the Department of Defense’s Maritime Supply Chain ESOC. Delivery is required within five days of award, FOB origin, with strict zero variance in quantity and inspection and acceptance occurring at the destination. The supplier must comply with all DLA Master List of Technical and Quality Requirements, which supersede other standards, including ASTM D3951 and MIL-STD-129 for packaging and marking. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances mandated unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The bolts must be physically marked per DLA requirements and packaged per RP001 with palletization adhering to DLA packaging directives. Delivery must be shipped via traceable freight to the Puget Sound Naval Shipyard in Bremerton, WA, with parcel post explicitly prohibited. The required delivery date is July 31, 2026, and the contract mandates full adherence to configuration change management and variance procedures. The supplier is identified as Electric Boat Corp or BEK, Inc., both listed under the same part number.

POSTED

DEADLINE

Solicitation # SPE7M0-26-T-031N

This contract is for the procurement of one electrical contact component, identified by part number 3RT2036-1AN20 and NSN 5999017312005, manufactured by SIEMENS INDUSTRY, INC. The requirement is issued under solicitation SPE7M0-26-T-031N with a firm delivery deadline of five days after award and delivery must be FOB origin. The quantity is fixed at one unit with no tolerance for variance. Packaging and marking must strictly follow MIL-STD-2073-1E and MIL-STD-129 standards, with packaging codes and methods specified including preservative method 41, dry packaging, and D3 unit container with E5 intermediate container. The item must be palletized according to DLA packaging requirements and shipped via traceable freight methods—parcel post is prohibited. The delivery and freight address is Fort Stewart, Georgia, with the same recipient for mark for instructions. A technical and quality compliance requirement is incorporated by reference from the DLA Master List, and all supplies must comply with government identification removal protocols and physical marking standards. The contract includes government-only administrative codes and indicates an original required delivery date of June 10, 2026, though no ship date is specified. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, under a federal procurement framework managed by the Department of Defense and the Maritime Supply Chain ESOC.

Other Electronic Component Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M0-26-T-031J

The contract specifies the procurement of a single electrical cord with NSN/Part Number 6145-01-695-6822, requiring delivery within five days of award. The solicitation is issued under SPE7M0-26-T-031J with a response deadline of August 17, 2026, and was posted on August 5, 2026. This is a federal procurement under the Department of Defense through the Maritime Supply Chain ESOC Buys office, with performance required at Camp Lejeune, North Carolina, 28542-0088. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable revision is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. Packaging must comply with DLA packaging requirements, and if the advice code is 2N, 28, or 34, the cord must be supplied in continuous length with no multiple unit packs; if 2P or 39, continuous length with multiple unit packs is acceptable, with the advice code superseding any conflicting schedule data. Any configuration changes require an engineering change proposal or variance request, and non-accepted supplies must have government identification removed. The alternate offeror must submit a complete data package including details for both the approved and alternate part. Primary point of contact is Abaigael Masterson at abaigael.masterson@dla.mil or 614-693-2532.

Saw Blade and Handtool Manufacturing

POSTED

DEADLINE

BEARING, STAVE SHAPED

Solicitation # SPE7M0-26-Q-1149

The contract specifies the procurement of 24 stave bearings, Class 3, Size No. 9, 1/16 inch oversize, 30 inches long, designed for use as an aft stern tube bearing assembly and manufactured to MIL-DTL-17901C with compliance to MIL-STD-129R and MIL-STD-2073-1E. Each stave is individually packaged in a unit package with no preservative required, wrapped in opaque or kraft paper to shield from sunlight, and enclosed in a weather-resistant single-wall fiberboard container with glued seams—no staples allowed. All units are overpacked in overseas-grade wooden boxes to ensure protection during transit and storage. Strict packaging rules prohibit bulk packaging, metal strapping directly on the staves, and any labeling on bare surfaces. The item is classified as a Type I shelf-life item with a non-extendable shelf life of 180 months and falls under the DLA Master List of Technical and Quality Requirements. The procurement prohibits ozone-depleting chemicals and mercury-containing compounds, with limited exceptions for specific functional uses mandated by NAVSEA. The delivery is FOB origin with a 30-day lead time, to be inspected and accepted at destination. The required sampling method follows MIL-STD-1916 or ASQ SPE7M0-26-Q-1149 with zero non-conformances permitted unless otherwise specified. Special marking “DO NOT BEND” must be applied to all unit containers, and shelf-life dates are to be indicated. The end user is the Egyptian Navy, with shipments routed through Amentum Warehouse in Fredericksburg, VA, and ultimately delivered to Ras El Tin, Alexandria. The contract mandates full and open competition and requires all technical and quality standards referenced from DLA’s eProcurement portal to be strictly adhered to. Substitutions for restricted materials require prior approval, and deviations must be formally requested through an Engineering Change Proposal. The item is identified by NSN 2010-01-209-9650 and is subject to a zero variance in quantity with delivery scheduled for early 2026.

Ball and Roller Bearing Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M0-26-Q-1148

The contract specifies the procurement of low-carbon cold-rolled steel strip measuring 0.0625 inches thick, 2 inches wide, and lengths between 96 and 192 inches, with a weight of 0.425 pounds per foot, as identified by NSN 9515-00-516-5739. The material must conform to ASTM A109/A109M and SAE AMS2807C standards, with temper 4 and finish 2, and must be supplied in whole-foot increments only. All units require continuous identification markings including the contract delivery order number, NSN, specification revision, alloy and temper details, manufacturer’s name, heat and lot numbers, and exact dimensions. Markings must be applied via stenciling or stamping, be legible, waterproof, and non-contaminating, while adhesive labels are permitted for narrow strips under 0.250 inches nominal OD. A Certificate of Quality Compliance, or mill material certification, must accompany each shipment and be forwarded to the DLA Troop Support Contracting Officer. The contract mandates strict compliance with the Qualified Suppliers List for Distributors (QSLD), restricting award eligibility exclusively to suppliers listed on the official DLA QSLD roster; any deviation or use of non-approved sources constitutes an unauthorized substitution and may result in criminal penalties. Packaging must follow MIL-STD-2073-1E and ASTM A700 specifications, with special codes Z and ZZ applied for preservation and marking as required. Markings must adhere to MIL-STD-129, including dual-unit quantities where applicable, and all shipments must avoid parcel post, instead using traceable freight methods. The delivery point is Puget Sound Naval Shipyard, with a firm fixed price and zero tolerance for quantity variance. Inspection and acceptance occur at destination, and the material must be delivered within 30 days after award. The contract also designates this item as a critical application, with a specific requirement for eight-foot continuous lengths for use on the USS Abraham Lincoln (CVN-72).

Rolled Steel Shape Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M0-26-T-031M

The contract is for one unit of an elbow fitting, specifically a pipe to tube component identified by NSN 4730-01-299-7309 and part number 16-12CTX-B from Parker-Hannifin Corporation, under solicitation SPE7M0-26-T-031M. Delivery is required within five days of award, with shipment to be made FOB origin in accordance with strict packaging standards including ASTM D3951 and MIL-STD-129 labeling, while adhering to DLA’s Master List of Technical and Quality Requirements which override any conflicting specifications. The item must not contain any Class I ozone-depleting chemicals, and any substitute materials require prior approval unless explicitly permitted by specification. Packaging must comply with DLA’s procurement guidelines including palletization standards, and the unit of issue is a single ea with no tolerance for quantity variance. Delivery destination is the Marine Wing Support Squadron 272 in Jacksonville, North Carolina, with all shipments required to use the fastest traceable transport method, explicitly prohibiting parcel post. The original required delivery date is July 24, 2026, and all government-specific identifiers, including the project code TP 1 and freight tracking number, must be accurately applied to the shipment.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M0-26-T-031P

The contract is for the procurement of two NUT, HOSE COUPLING units with NSN 4730015442756, each priced at $2.00, totaling $4.00, under solicitation SPE7M0-26-T-031P. Delivery is required within five days of order placement, with FOB origin terms and zero variance allowance on quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 while adhering strictly to all DLA Master List of Technical and Quality Requirements, which override any conflicting ASTM standards. Packaging and labeling must conform to MIL-STD-129, and palletization must follow RP001 DLA Packaging Requirements. The item is classified as a commercial off-the-shelf product, and government identification must be removed from non-accepted supplies. Shipment must be sent by the fastest traceable means, excluding parcel post, to Fort Eustis, Virginia, with detailed mark-for and freight shipping addresses provided. The required delivery date is August 6, 2026, and the contract specifies government-use-only identifiers including IPD, DIC, and FC codes. All documentation references the DLA unit of issue system and aligns with DoD procurement protocols.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

DEADLINE

Packaging and Palletization Services (DLA-Compliant)

Other Warehousing and Storage

POSTED

DEADLINE

Supply of Industrial Tube Elbow (NSN 4730016560532)

Industrial Valve Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days

View Details