Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Materials Compliance and Labeling Services

Active

Federal

Response Deadline08/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of OSHA-compliant hazard labeling and Safety Data Sheet submissions for any manufacturing or packaging activities involving hazardous substances, ensuring full regulatory alignment with federal safety standards. The work must adhere to the technical and procedural requirements dictated by OSHA for the accurate identification, classification, and communication of chemical hazards, including proper label content, signal words, pictograms, and SDS formatting. All deliverables must be submitted in a timely and precise manner to support the safe handling, storage, and transportation of hazardous materials throughout the supply chain. This is a subcontract under the NAICS code 541690, issued by the Department of Defense through LAND SUPPLIER OPNS ENGINES, with performance required in New Cumberland, Pennsylvania, under zip code 17070-5002. The solicitation, posted on July 26, 2026, demands responses by August 6, 2026, and is accessible through the DIBBS platform. While no set-aside provisions are specified, the contractor must demonstrate proven capability in hazardous materials compliance, experience with federal procurement regulations, and the capacity to manage documentation and labeling requirements for complex industrial processes.

General Info

Provide OSHA-compliant hazard labels and SDS for hazardous materials in New Cumberland, PA, per DOD subcontract.

Agency

Department Of Defense → LAND SUPPLIER OPNS ENGINESView Agency

NAICS

541690 - Other Scientific and Technical Consulting ServicesView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 26

subcontract

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLIER OPNS ENGINES

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLIER OPNS ENGINES

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide OSHA-compliant hazard labeling and Safety Data Sheet (SDS) submission for manufacturing or packaging processes involving hazardous substances.

Similar Contracts

Same NAICS industry code

Safety and Compliance Management

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Role of Glucagon-like Peptide-1 (GLP-1) receptor agonists versus DPP-4 inhibitors for alcohol and substance use disorders in improving HIV-related outcomes and providing health benefits in people living with HIVThis contract solicits commercial services through a combined synopsis/solicitation under solicitation number 75N95026R0007 issued by the National Institute on Drug Abuse within the National Institutes of Health, Department of Health and Human Services. The requirement is for a firm fixed-price contract to conduct a pharmacoepidemiological study using Veterans Affairs electronic health record data to evaluate the impact of GLP-1 receptor agonists on HIV-related outcomes and alcohol and substance use disorders in adults living with HIV. The study will employ propensity-score matching and multivariable linear regression analysis to assess changes in health outcomes before and after exposure to these medications, with deliverables including aggregate-level findings, support for conference abstracts, and peer-reviewed publications led by NIDA and its collaborators. Performance is expected to occur in Bethesda, Maryland, with a base period running from August 7, 2026, to August 6, 2027, and three optional one-year extension periods through August 6, 2030. The NAICS code is 541690, with a small business size standard of $19.0 million in average annual receipts, and the acquisition is full and open with no set-aside restrictions. The solicitation requires comprehensive offer submissions including detailed technical capability demonstrations and fully loaded pricing for labor categories, hours, other direct costs, and total amounts, along with mandatory representations including UEI, TIN, and active SAM registration. Evaluation will be based on technical capability, past performance, and price, with non-price factors significantly more important than price, indicating a trade-off selection process rather than lowest price technically acceptable. Several FAR clauses are incorporated by reference, including those related to labor standards, equal opportunity, subcontracting, whistleblower rights, cybersecurity, and prohibition of confidentiality agreements that restrict reporting misconduct. Clause 52.222-49 is included in full text due to an unknown place of performance at the time of solicitation, requiring wage determinations to be retroactively applied if needed without price adjustment. Restrictions on data handling are strict: only de-identified, aggregate data may be shared outside VA systems, with no personally identifiable information permitted to leave secure VA servers. Proposals must be submitted electronically by 9:00 a.m. EST on July 30, 2026, to Robin.Knightly@nih.gov, and the contracting officer retains authority to award without further negotiation upon timely acceptance of the best

National Institutes Of Health Nida

POSTED

about 10 hours ago

DEADLINE

Hazardous Materials Compliance & LabelingThe contract requires the preparation and submission of hazard warning labels and safety data sheets for hazardous materials used in cable production, ensuring full compliance with OSHA and Department of Defense standards. All documentation must be accurately formatted and scientifically valid to meet federal regulatory requirements for workplace safety and hazardous material handling. The work is under a subcontract and is performance-based, with the place of performance located at Barstow, California, ZIP 92311-5015. The solicitation was posted on July 26, 2026, and responses are due by August 3, 2026, under the NAICS code 541690 for other professional, scientific, and technical services. The contracting entity is the ASC Commodities Division within the Department of Defense, and all deliverables must align with DOD’s specific protocols for hazard communication and material safety management.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Hazardous Materials Compliance and LabelingAll hazardous materials must be labeled in strict accordance with OSHA’s 29 CFR 1910.1200 and the DFARS clause 252.223-7001 to ensure proper identification and handling of chemical hazards. Suppliers are required to submit hazard labels to the contracting officer if the materials are not already listed in the official inventory, ensuring full transparency and regulatory compliance. This subcontract, issued by the Department of Defense’s Fluid Handling Division under NAICS code 541690, is open for response until August 6, 2026, with performance expected to align with federal safety standards for chemical labeling across all work locations. Failure to comply with labeling requirements or to submit unlisted hazard information may result in contractual noncompliance penalties.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Hazard Communication Compliance & LabelingThe contract seeks specialized services for the preparation of hazard warning labels and Material Safety Data Sheets (MSDS/SDS) for hazardous materials, ensuring full compliance with OSHA 29 CFR 1910.1200 and MIL-STD-129 marking standards. This work is critical for maintaining regulatory adherence in handling, storing, and transporting dangerous substances, with precise formatting, language, and visual elements required to meet both federal safety and military specification requirements. The deliverables must be accurate, consistently formatted, and capable of being integrated into existing logistics and inventory systems used by the Department of Defense. The contract is classified as a subcontract under NAICS code 541690 for other scientific and technical consulting services, and it is being managed by the Fluid Handling Division within the Department of Defense. Performance is required to be conducted at Tracy, California, with a ZIP code of 95304-5000, and proposals must be submitted by the deadline of August 6, 2026. This opportunity is open to qualified subcontractors meeting the technical and compliance criteria, though no set-aside criteria have been specified. Interested parties can access the full solicitation through the DIBBS system using the provided link.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Hazard Communication and Safety Labeling ComplianceThe contract requires strict adherence to hazardous materials labeling standards under OSHA 29 CFR 1910.1200 and DFARS 252.223-7001, ensuring all chemical containers and associated documentation are accurately marked to comply with federal safety regulations. This includes the timely submission of Material Safety Data Sheets and verification of any applicable exemptions under FIFRA, FDCA, or CPSA to confirm legal handling and storage protocols. The work must be performed at the designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the contract is classified as a subcontract under NAICS code 541690, indicating it involves other scientific and technical consulting services. Proposals must be submitted by the deadline of August 6, 2026, and the solicitation is managed by the Department of Defense through its Maritime Supply Chain division, indicating this is part of a broader defense logistics or supply chain operation requiring high-level compliance and documentation rigor.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Technical Documentation and Traceability ServicesThe contract requires the preparation and secure submission of DLA Form 918 along with all associated test documentation to ensure complete traceability of components throughout the supply chain, emphasizing accuracy, compliance, and accountability at every stage. This work is critical to maintaining the integrity of defense logistics and ensuring that all parts meet stringent military standards for identification, testing, and documentation. The task is part of a subcontract under the NAICS code 541690, issued by the Active Devices Division of the Department of Defense, with performance centered in Columbus, Ohio, ZIP 43213. Responses must be submitted by August 6, 2026, following the solicitation posted on July 26, 2026, and must align with federal traceability protocols to support defense system reliability and audit readiness. The nature of the work demands strict adherence to documented procedures and secure handling of sensitive technical data.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Regulatory and Compliance Documentation SupportThe contract requires the preparation and submission of comprehensive regulatory documentation including hazard warning labels, safety data sheets, and compliance certifications that meet stringent OSHA, DFARS, and military standards. This work must be completed both prior to contract award and throughout performance to ensure ongoing adherence to federal and defense-specific safety and compliance requirements. The deliverables are critical for enabling the procurement and handling of materials within defense supply chains where regulatory accuracy directly impacts operational readiness and safety. This subcontract is issued under the NAICS code 541690 and is managed by the ASC Commodities Division under the Department of Defense. The place of performance is FPO with a ZIP code of 09587, indicating operations may involve overseas or expeditionary logistics. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, leaving a short window for qualified vendors to submit proposals. While no set-aside type is specified, the contract is part of a larger defense acquisition framework, demanding strict timelines, regulatory precision, and the ability to support military logistics under high-stakes conditions.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Hazardous Materials Documentation and LabelingThe contract requires the preparation and accurate submission of Safety Data Sheets and hazard labels for all hazardous materials utilized in production processes, ensuring full compliance with the Occupational Safety and Health Administration’s Hazard Communication Standard and the Defense Federal Acquisition Regulation Supplement clause 252.223-7001. This work is critical to maintaining regulatory adherence and operational safety across the defense supply chain, with deliverables must meet federal mandates for hazard communication, chemical classification, and labeling consistency. The submission must be finalized and delivered by the response deadline of August 3, 2026, and the effort is structured as a subcontract under NAICS code 541690, managed by the Department of Defense’s Aviation Supply Chain ESOC Buys office. All documentation must be technically precise, legally defensible, and aligned with current federal standards for hazardous material handling and dissemination.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Hazardous Materials Compliance and Labeling ServicesThe contract entails the identification, documentation, and labeling of hazardous materials associated with motors, ensuring full compliance with Department of Defense and OSHA standards. This includes the preparation of Safety Data Sheets and proper labeling protocols to meet regulatory requirements for handling, storage, and transportation of hazardous substances. Work must be performed in accordance with established federal safety guidelines, with emphasis on accuracy, consistency, and documentation integrity to support supply chain safety and operational readiness. This is a small business set-aside subcontract under NAICS code 541690, with performance located at FPO 09587, and is open exclusively to small businesses as defined by the SBA. The solicitation was posted on July 26, 2026, with proposals due by August 6, 2026. The contracting activity falls under the Maritime Supply Chain division of the Department of Defense, and all work must comply with applicable federal regulations governing hazardous material management. While no point of contact is listed, all responses must be submitted through the designated DIBBS portal.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Hazardous Materials Compliance and SDS PreparationThe contract requires identification of all hazardous components within air breathing hoses and the preparation of Safety Data Sheets that fully comply with OSHA’s 29 CFR 1910.1200 and Federal Standard No. 313, with all documentation to be completed and submitted before the contract award is finalized. This effort is focused on ensuring regulatory adherence for chemical safety and hazard communication, targeting the specific materials used in respiratory equipment. The work must be performed with precision to meet federal standards, and the deliverables are critical for the award process, making timely and accurate compliance non-negotiable. The solicitation is issued under the NAICS code 541690, indicating a professional, scientific, and technical services context, and is classified as a subcontract within the Department of Defense’s Fluid Handling Division. The place of performance is designated as San Diego, California, with a response deadline of August 6, 2026, and the posting date is July 26, 2026, leaving a narrow window of approximately two weeks for submission. There is no set-aside designation provided, meaning the opportunity is open to all eligible vendors without preference based on business size or category. The contractual obligations demand technical expertise in hazardous material analysis and SDS formatting, with no room for deviation from the mandated federal requirements.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) PreparationThe contract requires the preparation and submission of Safety Data Sheets (SDS) for hazardous materials to ensure full compliance with OSHA’s 29 CFR 1910.1200 regulations and the Defense Federal Acquisition Regulation Supplement (DFARS) clause 252.223-7001, which governs hazardous materials handling within Department of Defense contracts. This subcontract is specifically tied to the ASC Commodities Division and mandates accurate, up-to-date documentation that conveys hazard information, safe handling procedures, and emergency response protocols for all applicable substances used or distributed under the program. The SDS must meet all formatting, content, and language requirements specified by both federal safety standards and defense acquisition policies to support operational readiness and worker protection. Performance is expected to be executed in support of activities centered in San Diego, California, with a firm deadline for proposal submission set for August 3, 2026. The North American Industry Classification System code 541690 indicates the work falls under other scientific and technical consulting services, suggesting the contractor will provide specialized expertise in chemical safety documentation rather than manufacturing or distribution. While there is no set-aside classification provided, the solicitation is issued through the Defense Logistics Agency’s DIBBS platform, indicating it is open to qualified subcontractors seeking to fulfill defense-related compliance obligations. Contractors must be prepared to work under strict regulatory oversight and deliver documentation that is traceable, audit-ready, and aligned with DoD-specific environmental and safety requirements.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLIER OPNS ENGINES

Same awarding agency

Supply of Diesel Engine Starter Components (COTS)The contract involves the procurement and delivery of 485 units of a commercial off-the-shelf diesel engine starter component identified by NSN 2990013230307 and Part Number 714260-76821, manufactured by YANMAR AMERICA CORPORATION. The component must fully comply with military technical and quality standards despite being a COTS item. This is a subcontract under a Women-Owned Small Business Set-Aside, classified under NAICS code 336390, and is intended for performance at Tracy, California, with a zip code of 95304-5000. The solicitation was posted on July 26, 2026, and responses are due by August 6, 2026. The contracting activity is managed by the Department of Defense through the Land Supplier Operations Engines organization, with all logistics and delivery responsibilities tied to the specified performance location.

Other Motor Vehicle Parts Manufacturing

POSTED

DEADLINE

Cybersecurity Compliance and CMMC Self-Assessment SupportThe contract seeks support for achieving CMMC Level 2 compliance and conducting a self-assessment aligned with NIST SP 800-171 requirements to safeguard covered defense information, specifically related to technical data and supply chain reporting. The work involves implementing and validating controls necessary to protect sensitive information throughout the defense supply chain, ensuring adherence to federal cybersecurity standards for organizations handling defense-related technical data. The scope is focused on preparing the contractor to meet the Department of Defense’s cybersecurity maturity model criteria through structured evaluation, documentation, and remediation efforts. This subcontract is issued under NAICS code 541512, indicating it relates to computer systems design services, and is tied to performance at Tracy, California with a ZIP code of 95304-5000. The opportunity was posted on July 26, 2026, and responses are due by August 6, 2026, with the contracting activity managed by the Department of Defense under the organization name LAND SUPPLIER OPNS ENGINES. The contract is classified as a subcontract and does not specify a set aside category. Interested parties must respond via the provided DIBBS portal link to be considered for award.

Computer Systems Design Services

POSTED

DEADLINE

Configuration Management and Technical Documentation ServicesThe contract requires the provision of configuration control documentation and maintenance of technical data packages in strict alignment with MIL-STD-973 to ensure full traceability of delivered gear assemblies. This includes the accurate recording, updating, and management of technical data throughout the lifecycle of the assemblies to support accountability, compliance, and operational readiness. The vendor must establish and sustain a documented configuration management system that guarantees all changes are controlled, reviewed, and properly reflected in the technical records. The work is to be performed at Tracy, California, with a zip code of 95304-5000, under a subcontract structure as part of a Department of Defense initiative managed by LAND SUPPLIER OPNS ENGINES. The solicitation closed on August 6, 2026, and is classified under NAICS code 541330, indicating it falls within engineering services. All deliverables must meet the stringent military standards for documentation integrity and traceability, ensuring that every gear assembly can be uniquely identified and its history fully reconstructed at any point.

Engineering Services

POSTED

DEADLINE

Military-Compliant Packaging and Labeling ServicesThe contract requires the provision of military-compliant packaging, preservation, and labeling services for precision gear assemblies, ensuring full adherence to defense standards. Key deliverables include the application of barcodes for tracking and the inclusion of hazardous material warnings to meet regulatory and safety requirements. The work is classified as a subcontract under NAICS code 561910 and is issued by the Department of Defense through the LAND SUPPLIER OPNS ENGINES office. Performance is to be conducted at Tracy, California, with a zip code of 95304-5000. The solicitation was posted on July 26, 2026, with responses due by August 6, 2026, and can be accessed via the specified DIBBS platform link.

Packaging and Labeling Services

POSTED

DEADLINE

Precision Gear Assembly ManufacturingThe contract requires the manufacture and supply of nine units of an idler gear assembly specifically designed for fuel oil pumps used in GMC 567 and EMD 16-645E5LR diesel engines, with strict compliance to military specifications to ensure operational reliability and performance under demanding conditions. The components must meet exacting engineering and quality standards suitable for defense applications, and production must align with the NAICS code 332994, indicating the work falls under other fabricated metal product manufacturing. The place of performance is designated as Tracy, California, with a ZIP code of 95304-5000, indicating where the delivered assemblies are to be shipped or installed. This is a subcontract under the Department of Defense, solicited by LAND SUPPLIER OPNS ENGINES, with a response deadline set for August 6, 2026, and the solicitation posted on July 26, 2026. The contract is not subject to any specific set-aside program, and there is no designated point of contact listed. Interested parties must submit proposals through the DIBBS portal using the provided link before the deadline to qualify for award consideration, and successful bidders are expected to deliver fully compliant gear assemblies within the required timeframe to support military engine systems.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Specialized Packaging and Marking ServicesThe contract requires the provision of military-compliant packaging, preservation, and marking services for exhaust manifolds, adhering strictly to the standards outlined in ASTM D3951, MIL-STD-129, and DLA RP001. All work must ensure that components are protected against environmental damage during transport and storage, properly labeled with military-specification markings, and packaged to maintain integrity through handling and deployment. The performance location is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the operational scope is tied to this geographic area. This is a subcontract under the NAICS code 561910, which classifies it within Miscellaneous Support Services, and it is issued by the Department of Defense through the LAND SUPPLIER OPNS ENGINES organization. The solicitation was posted on July 26, 2026, with a binding response deadline of August 6, 2026. All bids must fully comply with defense logistics requirements and demonstrate capability to meet the exacting standards for military logistics and supply chain readiness. The contract is part of the broader DLA procurement system, accessible via the provided DIBBS link, and failure to meet any specified standard may result in rejection of the proposal.

Packaging and Labeling Services

POSTED

DEADLINE

Exhaust Manifold Manufacturing and SupplyThe contract involves the manufacture and supply of exhaust manifolds designated by NSN 2815-00-920-2073, specifically for CUMMINS NTC-400 engines installed in M915 to M920 tactical military vehicles. Delivery must be made FOB origin with a strict turnaround time of eleven days from the date of award, emphasizing the urgency and operational readiness requirements of the end-use application. The work is classified under NAICS code 336310, which corresponds to engine and engine parts manufacturing, and is issued as a subcontract under the Department of Defense's Land Supplier Operations Engines division. The solicitation was posted on July 26, 2026, with a response deadline of August 6, 2026, indicating a compact procurement window to ensure rapid vendor selection and fulfillment. The place of performance is listed as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, suggesting the deliverables may be coordinated through a designated logistics or distribution hub within the defense supply chain. While no specific set-aside status or point of contact is provided, the contract is accessible via the DIBBS platform, indicating it is part of the Defense Logistics Agency’s transparent procurement system for defense contractors.

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

DEADLINE

Manufacture and Supply of Spring, Spring Guide (NSN: 5360-01-169-5457)The contract requires the manufacture and delivery of six precision spring guide components conforming to military specifications, with the National Stock Number 5360-01-169-5457. Each unit must meet exacting quality and performance standards as defined by military requirements, and all deliveries must include proper packaging and compliance with hazardous materials labeling regulations to ensure safe handling and transportation. The work is to be performed under a subcontract arrangement, with a response deadline of August 6, 2026, and the place of performance is designated as Greensboro, North Carolina, with a zip code of 27409. The North American Industry Classification System code is 332613, indicating the nature of the industrial activity relates to spring manufacturing. The contracting entity is the Department of Defense under the Land Supplier Operations Engines division, and the solicitation is accessible via the DIBBS portal.

Spring Manufacturing

POSTED

DEADLINE

Export-Controlled Technical Data ManagementThis contract governs the secure handling and management of ITAR and EAR-controlled technical data related to the exhaust pipe component, ensuring strict compliance with U.S. export control regulations. The work is classified as a small business set-aside under the SBA’s Total Small Business Set-Aside program, with the NAICS code 541618 indicating it falls under other scientific and technical consulting services, and is being managed by the Department of Defense under the organization name LAND SUPPLIER OPNS ENGINES. Performance is required at the specified location in Tracy, California, with a zip code of 95304-5000, and all activities must be conducted under stringent protocols to safeguard sensitive technical information from unauthorized disclosure or transfer. The solicitation was posted on July 26, 2026, with a mandatory response deadline of August 6, 2026, and bidders must demonstrate proven capability in managing controlled technical data within a defense supply chain context.

Other Management Consulting Services

POSTED

DEADLINE

Domestic and International Transportation LogisticsThe contract involves the transportation of exhaust pipe units from the manufacturer to Tracy, California, with potential inclusion of sea transport as part of the logistics plan. Full compliance with Department of Defense shipping regulations is required, ensuring adherence to all military transport standards, documentation, and security protocols. The effort is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid. The North American Industry Classification System code 484121 confirms the scope falls under truck transportation and warehousing services. The solicitation was posted on July 26, 2026, with responses due by August 6, 2026, and the performance location is specifically designated as Tracy, CA, with a zip code of 95304-5000. The contracting agency is the Department of Defense under the organization name LAND SUPPLIER OPNS ENGINES, and the work must be executed with precision to meet DOD logistics requirements including potential international transit components prior to domestic delivery.

General Freight Trucking, Long-Distance, Truckload

POSTED

DEADLINE

Packaging, Labeling, and Hazard Communication ServicesThe contract requires the provision of packaging, labeling, and hazard communication services for exhaust pipe shipments in full compliance with MIL-STD-2073-1E packaging standards and MIL-STD-129 labeling requirements. All materials must be properly packaged to ensure protection during transit and storage, with precise labeling that meets military specifications for traceability, identification, and handling. Additionally, the contractor must manage Safety Data Sheets (SDS) to ensure accurate, up-to-date hazard communication documentation is available for all shipped items, aligning with federal regulatory expectations for chemical and material safety. This subcontract is a Total Small Business Set-Aside under the SBA program, meaning only small business concerns are eligible to respond, and it is classified under NAICS code 561910 for other support activities. The performance location is in Tracy, California, with a zip code of 95304-5000. The solicitation was posted on July 26, 2026, and responses are due by August 6, 2026. The contracting activity falls under the Department of Defense through the Land Supplier Ops Engines office, and all work must be executed in accordance with defense supply chain requirements.

Packaging and Labeling Services

POSTED

DEADLINE

Exhaust Pipe Component ManufacturingThe contract is for the manufacture and delivery of 91 exhaust pipe units to meet strict military specifications covering form, fit, function, and durability. This is a small business set-aside subcontract under the SBA program, exclusively available to qualified small businesses as defined by FAR 19.5, with the NAICS code 332999 indicating miscellaneous manufacturing. The solicitation was posted on July 26, 2026, and responses are due by August 6, 2026. Delivery must be performed at the designated place of performance in Tracy, California, with the zip code 95304-5000. The contracting activity falls under the Department of Defense through the Land Supplier Operations Engines organization, and all work must align with the rigorous standards required for military-grade components.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE