Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Materials Compliance & SDS Preparation

Active

Federal

Response Deadline07/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires identification of hazardous materials involved in manufacturing or packaging processes and the preparation of fully compliant Safety Data Sheets (SDS) in accordance with OSHA 29 CFR 1910.1200 and Federal Standard No. 313. The work focuses on ensuring regulatory adherence for chemical safety documentation, which is critical for workplace safety and legal compliance within defense-related operations. The contractor must accurately assess materials used in production environments and generate SDS documentation that meets federal standards for hazard classification, labeling, and emergency response information. This subcontract is issued under NAICS code 541620 for environmental consulting services and is associated with the Department of Defense's ASC SUPPLIER OPER AE AND AF DIV. The performance location is specified as San Diego, California, with a zip code of 92136-3581. The solicitation was posted on July 22, 2026, with a response deadline of July 30, 2026. Bidders must respond before the deadline to be considered, and the work is expected to support defense supply chain compliance by ensuring accurate and legally valid safety documentation for hazardous substances used in manufacturing or packaging activities.

General Info

Identify hazardous materials and create OSHA-compliant SDS for defense operations in San Diego.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

SAN DIEGO, CA, 92136-3581, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineJul 30

Submission deadline

Response Deadline

07/30/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Identify hazardous materials in manufacturing or packaging processes and prepare compliant Safety Data Sheets (SDS) per OSHA 29 CFR 1910.1200 and Federal Standard No. 313.

Similar Contracts

Same NAICS industry code

IFB No. 131007 Mitigation Implementation Planning and Agency Permitting, Camp San Luis ObispoThe Contractor is required to deliver all resources necessary to complete emergency mitigation planning for Camp San Luis Obispo, including materials, labor, bonds, licenses, insurance, equipment, tools, permits, taxes, transportation, and fees, fully aligned with the Scope of Work and the terms of Invitation for Bid No. 131007. The Prime Contractor must satisfy all qualification criteria specified in the Scope of Work and submit bids via email to PWC@cmd.ca.gov with Joy Lubic copied, using a subject line that includes the IFB number, project title, and business name. All inquiries must be directed to Joy Lubic at Joy.Lubic@cmd.ca.gov and received no later than 5:00 PM on July 27, 2026, with subject lines referencing IFB No. 131007; any addenda will be issued before the bid deadline. The bid submission deadline is 2:00 PM on August 5, 2026, followed by a public bid opening at 2:15 PM the same day. The project is under the California Military Department, with performance taking place in San Luis Obispo, California.

California Military Department

POSTED

about 14 hours ago

DEADLINE

ENVIRONMENTAL PROFESSIONAL SERVICES - Killingly and ChaplinThe Northeastern Connecticut Council of Governments is seeking qualified environmental consulting firms and Licensed Environmental Professionals to deliver environmental assessment services for two brownfield redevelopment sites in Chaplin and Killingly, Connecticut. These assessments are critical for supporting municipal efforts to revitalize underused or contaminated properties, with the goal of enabling future development while ensuring regulatory compliance and environmental safety. The solicitation, identified as 38115, is open for responses until August 24, 2026, and is issued on behalf of member municipalities under the state’s procurement authority. Applicants must demonstrate expertise in environmental investigations, site characterization, and familiarity with state and federal brownfield programs. All proposals must be submitted by the deadline and should reflect the firm’s qualifications, relevant experience with similar projects in Connecticut, and capacity to deliver accurate and timely assessments. The primary point of contact for questions and submissions is Jordan Lumpkins, reachable by phone or email, and all work is expected to be performed within the state of Connecticut. This solicitation does not specify a set-aside for small or disadvantaged businesses and is categorized under state and local government procurement. Interested parties can access further details and submission guidance through the Connecticut Department of Administrative Services portal.

DAS Procurement

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Hazardous Materials Compliance & LabelingThis contract requires strict compliance with hazardous materials regulations, specifically enforcing 29 CFR 1910.1200 for hazard communication and MIL-STD-129 for uniform labeling of military materiel. A critical requirement is the verification that no mercury or mercury-containing components are present in any delivered items; if mercury cannot be entirely excluded, the contractor must implement robust containment measures and apply precise labeling to ensure safe handling and transport. The work is scoped as a subcontract under NAICS code 541620, indicating a focus on scientific and technical consulting services related to hazardous materials management. Performance is to be executed at FPO with a zip code of 09514, pointing to a military overseas location, and all deliverables must align with Department of Defense standards. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, and is managed by the Defense Logistics Agency under the Department of Defense.

Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires the provision of compliant hazard warning labels and Safety Data Sheets for all hazardous materials included in a motor parts kit, strictly adhering to OSHA and Department of Defense regulatory standards. All labeling and documentation must meet federal safety protocols to ensure proper handling, storage, and disposal of hazardous substances throughout the supply chain. The requirement is issued as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond. The NAICS code 541620 designates it as an environmental consulting and related services category, aligning with the technical and compliance expertise needed. The solicitation was posted on July 22, 2026, with responses due by August 6, 2026, and the overseeing agency is the Department of Defense through its Maritime Supply Chain organization. The place of performance and point of contact details are not specified, but the official solicitation can be accessed via the DIBBS portal.

MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

Hazardous Materials Handling and LabelingThe contract titled Hazardous Materials Handling and Labeling requires the identification, labeling, and documentation of hazardous materials used in manufacturing or packaging processes under a subcontract arrangement. It is associated with the NAICS code 541620 and falls under the Department of Defense’s LAND SUPPLY CHAIN organization, indicating its relevance to defense supply chain operations. The solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026, requiring timely submission of proposals that meet precise compliance standards for hazardous material management. The place of performance and point of contact details are not specified, suggesting the work may be conducted at multiple or undefined locations consistent with broader defense logistics requirements. All activities must align with federal regulations governing hazardous material handling to ensure safety, traceability, and regulatory adherence across the supply chain.

LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

Hazardous Materials Compliance and DocumentationThe contract titled Hazardous Materials Compliance and Documentation requires the preparation and ongoing maintenance of Safety Data Sheets for supplied hose or packaging products, ensuring full adherence to OSHA and federal hazardous materials regulations. All labeling associated with these materials must also meet current federal compliance standards to guarantee safe handling, storage, and transportation. The work is to be performed in San Diego, California, under the oversight of the Fluid Handling Division within the Department of Defense, with a response deadline of August 3, 2026. This is a subcontract opportunity classified under NAICS code 541620, indicating it involves scientific and technical consulting services related to environmental and safety compliance. Bidders must ensure their documentation processes are accurate, up to date, and fully aligned with regulatory requirements to support the Department of Defense’s operational safety protocols.

FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

Hazardous Material Labeling and Compliance ServicesThe contract seeks services for the design and application of hazardous material labels that adhere to OSHA and MIL-STD-129R standards, ensuring full compliance with federal regulations for military logistics. This includes the accurate placement of GHS pictograms, generation and encoding of 2D barcodes, and seamless integration with defense logistics information systems to support tracking, inventory management, and safe handling throughout the supply chain. All labeling must meet stringent Department of Defense requirements for durability, readability, and data accuracy under operational conditions. Performance is centered at Tracy, California, with a 95304-5000 zip code designation, and the work is intended as a subcontract under NAICS code 541620, which pertains to management, scientific, and technical Consulting services. The solicitation was posted on July 22, 2026, with a response deadline of July 28, 2026, indicating a tight turnaround expectation for qualified vendors. The contracting activity falls under DLA Dist San Joaquin, a branch of the Department of Defense responsible for logistics and distribution, and the scope suggests a focus on high-volume, mission-critical labeling for defense assets requiring regulatory precision and system interoperability.

DLA DIST SAN JOAQUIN

POSTED

about 19 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) PreparationThe contract requires identification of hazardous components within navigational lights and the preparation of Safety Data Sheets compliant with OSHA standards, ensuring all chemical and material risks are accurately documented and classified. The submitted SDS documents must align with federal regulatory requirements and be formally approved by relevant government authorities. Integration with MIL-STD-129 labeling standards is mandatory, ensuring that all hazardous materials are properly marked and coded for consistent identification, handling, and storage across defense logistics systems. This work supports safety, regulatory compliance, and operational readiness within Department of Defense environments. Performance is centered at the New Cumberland facility with a zip code of 17070-5002 and is classified under NAICS code 541620, indicating technical, scientific, or laboratory services related to environmental or safety compliance. The solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026, and is structured as a subcontract under the Department of Defense’s DDSP New Cumberland Facility. No set-aside provisions are specified, making it open to eligible subcontractors capable of meeting the rigorous technical and regulatory demands of defense-grade hazardous materials documentation and labeling.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 19 hours ago

DEADLINE

Hazard Communication and SDS Compliance ServicesThe contract titled Hazard Communication and SDS Compliance Services requires full adherence to OSHA’s 29 CFR 1910.1200 regulations for hazardous material labeling, including the accurate preparation and application of hazard warning labels on all regulated substances. The scope encompasses the complete management of Safety Data Sheets, ensuring they are up to date, properly formatted, and submitted in compliance with federal requirements. This subcontract is issued under NAICS code 541620 by the Electrical Devices Division within the Department of Defense and is open for response until August 3, 2026, with proposals must be submitted through the specified DIBBS portal. The work is expected to be performed in support of federal operations, though no specific location is designated, and the contract does not include a set-aside designation.

ELECTRICAL DEVICES DIV

POSTED

about 19 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling SupportThe contract requires comprehensive hazard communication support for Department of Defense shipments, focusing on the preparation of safety data sheets, the design of hazard warning labels, and the verification of regulatory compliance with DoD standards. All deliverables must align with federal transportation and workplace safety regulations to ensure safe handling, storage, and transit of hazardous materials. The work is scoped to support military logistics operations and must be executed in accordance with the applicable requirements for hazardous material documentation and labeling. The contract is issued as a subcontract under the NAICS code 541620 for scientific and technical consulting services, with a response deadline of August 3, 2026. Performance is designated to take place in Bremerton, Washington, with a zip code of 98314-6001. The contract is managed under the Department of Defense through its Construction & Equipment MRO Service I procurement office, and all proposals must meet the specified compliance criteria to be considered. The opportunity is not subject to a set-aside classification, and interested parties must respond via the provided DIBBS portal before the deadline to be eligible for award.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 19 hours ago

DEADLINE

Hazardous Materials Identification & LabelingThe contract requires the identification of hazardous materials within shipments and the accurate application of labels compliant with OSHA’s Hazard Communication Standard 29 CFR 1910.1200, ensuring all chemical hazards are properly communicated through standardized labeling practices. This includes the generation of Safety Data Sheets (SDS) and the pre-award submission of labels for review and approval, which are critical to meeting regulatory requirements before any materials are transported or handled. The work demands a thorough understanding of chemical classification, labeling criteria, and documentation procedures to ensure full compliance and safety across the supply chain. The contract is a subcontract under the NAICS code 541620, associated with environmental consulting services, and is issued by the Department of Defense through LSO COMBAT VEHICLES AND ARMAMENT. The place of performance is in Tampa, Florida, with a response deadline of August 3, 2026. Although the solicitation number and point of contact are not provided, the UI link directs to the DIBBS platform where full details may be accessed. The absence of a set-aside designation suggests the opportunity is open to all eligible contractors without preference, and all work must align with federal hazardous material handling standards applicable to defense-related logistics.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 19 hours ago

DEADLINE

Hazardous Materials Identification and Safety Data ReportingThe contract requires the identification of all hazardous materials used in manufacturing or packaging processes, with full compliance to DFARS 252.223-3. This includes the generation of accurate Safety Data Sheets for each identified hazardous substance and the mandatory reporting of any hazardous materials not previously listed to the contracting officer without delay. The requirement applies to all stages of production and packaging, ensuring transparency and safety in alignment with Department of Defense regulations. All materials, regardless of volume or perceived risk, must be cataloged and documented to meet federal defense supply chain standards. Performance is tied to the location in Jacksonville, Florida, with a response deadline of July 30, 2026. The contract is structured as a subcontract under NAICS code 541620, indicating a focus on scientific and technical consulting services related to hazardous material management. It is administered by the Defense Logistics Agency under the Department of Defense, requiring strict adherence to federal compliance protocols. Failure to identify, document, or report unlisted hazardous materials could result in contract noncompliance and potential penalties.

Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Export Control Compliance Advisory (ITAR/EAR)The contract requires advisory services focused on compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR) for technical data associated with a shim. The scope centers on preventing unauthorized disclosure of controlled information to foreign persons and ensuring all transfers adhere to proper authorization protocols, including export licenses or exemptions. The consultant must possess detailed expertise in U.S. export control frameworks and be able to interpret and apply regulatory requirements to specific technical data, particularly as it pertains to defense-related components. Performance is expected to be conducted in San Diego, California, with the contracting entity being the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV. This is a subcontract award issued under NAICS code 541611, which classifies management consulting services. The solicitation was posted on July 22, 2026, with responses due by July 30, 2026. While no set-aside type is specified, the work involves strict compliance obligations requiring familiarity with defense export controls and the ability to support internal processes that safeguard regulated technical data from inadvertent or illegal transmission.

Administrative Management and General Management Consulting Services

POSTED

about 19 hours ago

DEADLINE

Ocean Freight Transportation CoordinationThe contract seeks coordination of ocean freight transportation with a priority on utilizing U.S.-flag vessels whenever feasible, ensuring compliance with all regulatory standards for hazardous materials handling and documentation. The successful vendor will be responsible for preparing accurate bills of lading and managing the end-to-end logistics process to guarantee timely and compliant delivery to DLA San Joaquin. All activities must align with federal transportation and safety protocols, with particular emphasis on documentation integrity and traceability from origin to final destination. The opportunity is classified as a subcontract under NAICS code 483111, with a deadline for responses on July 30, 2026, and a posting date of July 22, 2026. Performance is required at San Diego, CA, with the contracting entity being the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV. There is no set-aside designation specified, and the contract does not include a designated point of contact. Potential bidders must review the full solicitation through the provided DIBBS link to ensure full compliance with submission requirements and performance expectations.

Deep Sea Freight Transportation

POSTED

about 19 hours ago

DEADLINE

Precision Metal Shim ManufacturingThe contract requires the manufacture of 42 precision metal shims identified by NSN 5365-00-942-1796, with all production activities—including machining, inspection, and packaging—strictly following Department of Defense technical specifications and military standards. The work must be completed in compliance with the NAICS code 332710, which covers other fabricated metal product manufacturing, and performance is to take place at a designated location in San Diego, California, with ZIP code 92136-3581. The solicitation is structured as a subcontract under the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense, with a response deadline of July 30, 2026, and was posted on July 22, 2026. All deliverables must meet exacting quality and documentation requirements to ensure full alignment with military supply chain protocols.

POSTED

about 19 hours ago

DEADLINE

Cybersecurity and CDI Compliance SupportThe contract requires the implementation and ongoing maintenance of NIST SP 800-171 security controls to safeguard Covered Defense Information, ensuring compliance with Department of Defense cybersecurity standards. This includes conducting regular assessments to validate the effectiveness of these controls and promptly reporting any cyber incidents as mandated by DFARS regulations. The work is structured as a subcontract under the NAICS code 541512, targeting specialized cybersecurity support services for defense-related operations. All activities must be performed in alignment with federal requirements to protect sensitive information and uphold the integrity of defense systems. The solicitation was posted on July 22, 2026, with a response deadline of July 29, 2026, indicating a tight turnaround for potential subcontractors to submit proposals. The contracting office is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, and while specific performance locations are not detailed, the work is expected to support defense infrastructure wherever Covered Defense Information is handled. Successful bidders must demonstrate proven capability in executing NIST 800-171 requirements, incident response protocols, and defense compliance reporting to meet the stringent security obligations of this engagement.

Computer Systems Design Services

POSTED

about 19 hours ago

DEADLINE

Technical Documentation and Traceability SupportThe contract requires the preparation and ongoing maintenance of comprehensive technical documentation packages for each delivery, ensuring all deliverables are supported by accurate drawings, detailed specifications, and complete traceability records. These documents must be meticulously organized to meet compliance requirements and enable potential reverse-engineering verification, emphasizing precision and continuity throughout the product lifecycle. The effort is critical for sustaining accountability and facilitating technical validation under stringent oversight. This subcontract is issued under NAICS code 541330 by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of July 29, 2026, and a posting date of July 22, 2026. Although specific performance location and point of contact details are not provided, the work is intended to support defense-related technical operations with no set-aside designation. All documentation must be delivered in a manner that aligns with federal technical standards and supports long-term operational readiness and audit readiness.

Engineering Services

POSTED

about 19 hours ago

DEADLINE

Logistics and Delivery Services (FOB Origin)The contract involves transporting defense items from the contractor’s facility at FOB Origin to multiple military stock locations across the continental United States, requiring full delivery tracking and comprehensive risk-of-loss management throughout the transit process. All shipments must adhere to strict defense logistics standards, ensuring secure, timely, and accountable movement of sensitive materials to designated DOD inventory points. The contractor is responsible for end-to-end operational control from pick-up at the origin facility until successful receipt and confirmation at the final military destination. This is a subcontract under the Department of Defense, managed by the ASC SUPPLIER OPER AE AND AF DIV, with a NAICS code of 484121 indicating a focus on truck transportation for freight and general logistics services. The solicitation was posted on July 22, 2026, with a firm response deadline of July 29, 2026, and all performance activities are limited to CONUS locations. The contractor must demonstrate capability in handling defense-related logistics, including secure tracking systems, compliance with military delivery protocols, and accountability for any loss, damage, or delay during transit.

General Freight Trucking, Long-Distance, Truckload

POSTED

about 19 hours ago

DEADLINE

Defense Item Manufacturing and PackagingThe contract requires the manufacture, packaging, labeling, and preparation of defense-related items for shipment, with strict adherence to MIL-STD-129 standards for labeling and packaging documentation. Each package must include complete technical documentation to ensure operational readiness and compliance with military logistics requirements. The work is classified as a subcontract under the NAICS code 332999, indicating it involves other miscellaneous manufacturing activities not elsewhere classified, and is being managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Performance is expected to meet rigorous federal defense specifications, and all deliverables must be fully compliant with established military protocols for identification, handling, and documentation. The solicitation was posted on July 22, 2026, with responses due by July 29, 2026, and is accessible via the DIBBS platform for qualified subcontractors.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 19 hours ago

DEADLINE

Packaging, Marking, and Logistics SupportThe contract requires full packaging and marking of aerospace fasteners in strict compliance with MIL-STD-129 and ASTM D3951 standards, ensuring all items are properly labeled, documented, and prepared for military logistics use. In addition to packaging and marking, the contractor must coordinate freight movement and prepare ocean bills of lading specifically for delivery to DLA Warner Robins, aligning all documentation and shipping procedures with Defense Logistics Agency requirements. The work is targeted for performance at Robins Air Force Base, Georgia, with the NAICS code 488510 indicating the scope falls under support activities for air transportation. This is a subcontract opportunity with a response deadline of July 30, 2026, issued under the Department of Defense's ASC SUPPLIER OPER AE AND AF DIV, and all activities must support the secure, accurate, and timely delivery of critical aerospace components to DLA facilities.

Freight Transportation Arrangement

POSTED

about 19 hours ago

DEADLINE

Hazard Warning Labeling and Compliance ServicesThe contract requires the provision of hazard warning labels and the preparation of safety data sheets to ensure full compliance with DFARS 252.223-7001 and OSHA hazard communication standards. This subcontract focuses on delivering accurate, standardized labeling and documentation for hazardous materials used in defense-related operations, with all work to be performed at Robins Air Force Base, Georgia, 31098-1887. The solicitation is open to bidders through July 30, 2026, and falls under NAICS code 541690, which encompasses other scientific and technical consulting services. The contracting entity is the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, indicating this effort supports military supply chain needs by enforcing regulatory compliance and safety protocols for chemical and material handling across defense systems.

Other Scientific and Technical Consulting Services

POSTED

about 19 hours ago

DEADLINE

Threaded Pin-Rivet Supply (NAS1724V5-13E Compliant)The contract calls for the supply of 429 threaded pin-rivets that must fully comply with the NAS1724V5-13E specifications and meet DLA quality standards, ensuring rigorous adherence to military-grade engineering requirements. All units are subject to zero-defect inspection upon arrival at the designated performance location, Robins Air Force Base, Georgia, with no tolerance for non-conforming items, thereby placing full responsibility on the supplier for quality assurance throughout production and shipment. The solicitation is classified as a subcontract under NAICS code 332312 and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with a clear deadline for responses on July 30, 2026, and the posting date listed as July 22, 2026. Failure to meet the zero-defect standard at destination will result in rejection of the entire lot, requiring suppliers to implement robust inspection protocols and traceability systems prior to delivery.

Fabricated Structural Metal Manufacturing

POSTED

about 19 hours ago

DEADLINE

Electronic Invoicing & WAWF Submission SupportThe contract titled Electronic Invoicing & WAWF Submission Support requires the vendor to prepare and electronically submit invoices and receiving reports through the Wide Area WorkFlow system, adhering to EDI standards for document formatting and submission. This includes handling combined document submissions and resolving errors that arise during the electronic filing process, ensuring compliance with federal procurement requirements. The work is critical to maintaining accurate and timely payment processing for government transactions, with a focus on seamless integration and error resolution within the WAWF environment. This is a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses can compete, and it is classified under the NAICS code 541512 for Computer Systems Design Services. The solicitation was posted on July 22, 2026, with responses due by August 5, 2026, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Performance location details are not specified, and the opportunity is available through the DIBBS portal with a publicly accessible link for further reference.

Computer Systems Design Services

POSTED

about 19 hours ago

DEADLINE

Supply Chain Traceability & Documentation ServicesThe contract requires comprehensive supply chain traceability documentation services to ensure full transparency and compliance with federal procurement regulations, specifically the Buy American Act and Defense Logistics Agency sourcing standards. This includes providing accurate and verifiable material certifications, country of origin declarations, and all supporting documentation necessary to demonstrate adherence to these stringent requirements throughout the supply chain. The work scope is focused on maintaining end-to-end traceability to support audit readiness and regulatory compliance for defense-related procurements. This is a total small business set-aside under the SBA program, meaning only small businesses are eligible to compete, and it is classified under NAICS code 541611 for management consulting services. The solicitation was posted on July 22, 2026, with responses due by August 5, 2026, and is issued under the Department of Defense through the ASC Supplier Operations AE and AF Division. The place of performance and point of contact details are not specified, but the contract is accessible via the DIBBS portal and is structured as a subcontract.

Administrative Management and General Management Consulting Services

POSTED

about 19 hours ago

DEADLINE