Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Materials Handling and Safety Data Compliance

Active

Federal

Response Deadline07/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the identification and management of hazardous materials throughout the supply chain, with a focus on ensuring full compliance with OSHA’s Hazard Communication Standard and DFARS regulatory requirements. Providers must prepare complete and accurate Safety Data Sheets for all regulated substances, maintaining up-to-date documentation that meets federal safety and transparency standards. This work is essential to safeguard personnel, support operational readiness, and align with Department of Defense supply chain protocols. This subcontract is issued under NAICS code 541620 and is tied to the Subsistence FSE Supply Chain within the Department of Defense. Responses are due by July 28, 2026, with solicitation materials accessible via the DIBBS platform. While no specific geographic place of performance is designated, the work is expected to support nationwide defense logistics operations. Compliance is non-negotiable, and failure to meet SDS and regulatory obligations may result in contract rejection or termination.

General Info

Manage hazardous materials per OSHA and DFARS, deliver accurate SDS, support DoD supply chain by July 28, 2026.

Agency

Department Of Defense → SUBSISTENCE FSE SUPPLY CHAINView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineJul 28

Submission deadline

Response Deadline

07/28/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → SUBSISTENCE FSE SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → SUBSISTENCE FSE SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Identify hazardous materials in the supply chain, prepare Safety Data Sheets (SDS), and ensure compliance with OSHA HCS and DFARS requirements.

Similar Contracts

Same NAICS industry code

AQD Professional ServicesThe District of Columbia’s Office of Energy and Environment is seeking professional services to support a mobile air monitoring program funded under the Inflation Reduction Act, with a budget allocation of $205,000. This initiative aims to enhance ambient air quality data collection through mobile monitoring technologies, enabling more accurate and dynamic assessment of pollutant levels across the city. The contract focuses on deploying advanced sensing platforms, operational support, data analysis, and reporting capabilities to identify pollution hotspots and inform public health and environmental policy decisions. The effort is part of a broader strategy to improve environmental justice outcomes by targeting areas with historically elevated air pollution levels and limited monitoring coverage. Contractors will be expected to deliver tailored mobile monitoring solutions, ensure data integrity, integrate findings into existing air quality frameworks, and potentially engage community stakeholders to increase transparency and outreach. Although the solicitation is currently in forecast status and lacks specific deadlines or set-aside details, it signals the agency’s intent to procure expert services in the near future, with performance expected to take place within the District of Columbia. All work must align with federal funding requirements and environmental monitoring standards under the Inflation Reduction Act.

Energy and Environment (DOEE)

POSTED

about 9 hours ago

DEADLINE

FY26-DOEE-WPD-District Waterways Advisory PlanThe District of Columbia’s Office of the Environment (DOEE) has issued a forecast for the development of the District Waterways Advisory Plan under contract FY26-DOEE-WPD-District Waterways Advisory Plan, scheduled for release on July 23, 2026. This initiative aims to create a comprehensive advisory framework to guide the management, protection, and sustainable use of the District’s waterways, though specific scope details, funding levels, and performance metrics have not yet been published. The contract is anticipated to require expert input on environmental planning, stakeholder engagement, and regulatory alignment to support long-term waterway health and public access. No set-aside provisions, NAICS codes, or organizational type restrictions have been specified at this stage, and the place of performance is not yet defined, though work is expected to focus within the District of Columbia. The contracting activity will be managed by the Energy and Environment agency under the District government, with no point of contact listed publicly at this time. Interested parties should monitor the official portal at the provided UI link for upcoming solicitations, deadlines, and detailed requirements as the fiscal year 2026 procurement process advances.

Energy and Environment (DOEE)

POSTED

about 9 hours ago

DEADLINE

FY26-DOEE-WPD-Reservation 630 Desgins and Environmental AssessmentThe contract targets the provision of specialized design services and a National Environmental Policy Act Environmental Assessment for a planned stream restoration project at Reservation 630. This effort will involve detailed engineering and ecological planning to restore natural hydrologic functions, stabilize stream banks, improve water quality, and enhance riparian habitats, all while adhering to regulatory standards and environmental compliance requirements. The scope requires the development of site-specific designs that integrate ecological resilience with infrastructure needs, alongside a thorough Environmental Assessment to evaluate potential impacts and identify mitigation measures. The work is forecasted under the District of Columbia’s Department of Energy and Environment, with a posted date of July 23, 2026, indicating this is a future opportunity for procurement. While no solicitation number or set-aside details are included yet, the project is expected to draw from firms with expertise in environmental planning, stream restoration, and NEPA documentation. Performance will occur at Reservation 630, though exact location details are not specified. The contract is anticipated to support long-term environmental goals for the District by restoring impaired waterways and ensuring compliance with federal and local environmental regulations.

Energy and Environment (DOEE)

POSTED

about 9 hours ago

DEADLINE

FY26-DOEE-USA-Battery Stewardship OutreachThe District of Columbia’s Office of Energy and Environment is forecasting a contract opportunity for fiscal year 2026 focused on battery stewardship education and public engagement initiatives. The program aims to raise awareness about proper battery disposal, recycling, and the environmental risks of improper handling, with an emphasis on reducing battery waste and promoting sustainable practices across the community. The initiative will involve developing and deploying outreach campaigns, educational materials, and community engagement activities designed to inform residents, businesses, and institutions about responsible battery management and existing local recycling resources. This effort is part of a broader zero waste strategy to minimize landfill contributions and support circular economy goals. The contract will require a deep understanding of local demographics and environmental equity issues to ensure outreach is inclusive and reaches underserved populations. Activities will likely include partnerships with schools, community organizations, waste haulers, and retailers to implement collection points and educational workshops. While specific eligibility criteria and funding amounts are not yet available, interested parties should prepare proposals that demonstrate experience in environmental education, public communication, and program implementation within urban settings. The forecast was posted on July 23, 2026, and further details are expected to be released through the District’s procurement portal.

Energy and Environment (DOEE)

POSTED

about 9 hours ago

DEADLINE

FY26-DDOT-TPA-Metropolitan Branch Trail - First Pl to Oglethorpe St NE PlanningThe District of Columbia Department of Transportation is forecasting planning services for the Metropolitan Branch Trail, specifically for the segment between First Street NE and Oglethorpe Street NE, under the fiscal year 2026 budget cycle. The scope of work involves conceptual planning and compliance with the National Environmental Policy Act, requiring detailed evaluation of trail alignment options, environmental impacts, community engagement, and preliminary design considerations to support future construction. This effort aims to advance a multi-use trail that integrates seamlessly with existing infrastructure and neighborhoods while addressing accessibility, safety, and sustainability goals. The project is part of the city’s broader transportation planning initiative to expand non-motorized transit options, enhance connectivity across Northeast Washington D.C., and support equitable access to greenways. Although no solicitation number or set-aside details are currently available, the anticipated contract will require expertise in transportation planning, environmental review, public outreach, and Geographic Information Systems. The work must be completed in alignment with District regulations and federal environmental standards, with deliverables including design concepts, NEPA documentation, and recommendations for next steps in the project development process. The forecast does not indicate a specific award date, but interested parties should monitor the provided UI link for updates on posting and submission requirements.

Transportation (DDOT)

POSTED

about 9 hours ago

DEADLINE

FY26-DOEE-WPD-NPS East NEPA Environmental Assessment RSC's (WPD)The District of Columbia’s Office of Energy and Environment is forecasting a contract for an environmental assessment focused on identifying and evaluating poor quality stormwater outfalls in the East region. This effort is part of the National Pollutant Discharge Elimination System program under the Clean Water Act and will involve a NEPA-compliant environmental review to determine potential impacts from degraded stormwater discharges and to support future mitigation or remediation planning. The assessment will likely include field surveys, water quality sampling, site characterization, and analysis of existing infrastructure to identify sources of pollution and assess risks to local waterways and ecosystems. The contract is scheduled for release in fiscal year 2026 and is expected to be awarded under agency-specific procedures, with no set-aside designation indicated. Work will be performed in the East area of the District of Columbia, though exact locations and boundaries have not been specified. The solicitation will be issued through the District’s public contracting portal, and interested parties should monitor the official website for updates. No point of contact information is currently available, and the NAICS code and set-aside details have not been provided, suggesting the full scope and eligibility requirements will be detailed in the upcoming solicitation document.

Energy and Environment (DOEE)

POSTED

about 9 hours ago

DEADLINE

FY26-DDOT-TPA-Commuter ConnectionsThe Commuter Connections Program for FY26 under the District of Columbia Department of Transportation aims to reduce mobile source emissions by decreasing vehicle miles traveled through the promotion of alternative transportation methods and other transportation control measures. The initiative focuses on encouraging modal shifts away from single-occupancy vehicles by supporting programs such as carpooling, transit use, biking, walking, and other sustainable commuting options that contribute to improved air quality and reduced traffic congestion. This forecasted contract is part of the city’s broader environmental and transportation sustainability goals, targeting measurable reductions in emissions and enhanced commuter mobility across the district. The solicitation is posted on the DC Government contracts portal with a published date of July 23, 2026, and is open for future competitive bidding, though specific award details, set-aside status, NAICS code, and point of contact information have not yet been provided.

Transportation (DDOT)

POSTED

about 9 hours ago

DEADLINE

FY26-OCP-DOH Facilities-BSIThe contract opportunity titled FY26-OCP-DOH Facilities-BSI is forecasted for fiscal year 2026 and relates to industrial hygiene services for the District of Columbia Department of Health. It is posted under the Health (DOH) agency and will be performed within the District of Columbia, though specific city and address details are not yet provided. The solicitation is currently in forecast status, meaning it is a preliminary notice and not yet open for bidding, with no solicitation number assigned and no set-aside provisions indicated. This opportunity is aimed at securing an industrial hygienist to support facility operations, likely involving assessment, monitoring, and mitigation of workplace environmental health hazards. No point of contact information is listed, and the official reference can be accessed through the provided UI link for further updates as the procurement progresses.

POSTED

about 9 hours ago

DEADLINE

Behavioral Health Stakeholders' Engagement ContractThe District of Columbia’s Health Care Finance Agency is forecasting an engagement contract aimed at involving behavioral health stakeholders to support the development, improvement, or implementation of behavioral health services and policies. This initiative is part of ongoing efforts to enhance community-based care and ensure that key voices in the behavioral health ecosystem contribute meaningfully to decision-making processes. Though solicitation details such as NAICS code, set-aside status, and specific funding amounts are not yet available, the contract is expected to establish a structured framework for collaboration with providers, advocates, patients, and other relevant parties. The engagement will likely focus on gathering insights, feedback, and recommendations to shape behavioral health initiatives in the District, potentially including outreach, consultation sessions, workshops, or advisory panels. Performance is anticipated to occur within the District of Columbia, with no specific office location or point of contact listed at this forecast stage. Interested parties should monitor future solicitations for detailed requirements, submission guidelines, and timeline information, as this notice serves as an early indicator of the agency’s intent to formalize stakeholder involvement in behavioral health planning and system reform.

Health Care Finance (DHCF)

POSTED

about 9 hours ago

DEADLINE

FY26 - DOEE-Toxic Substances Division - Contractual Services for Defense Site Memorandum of AgreementThe District of Columbia’s Department of Energy and Environment is forecasting a contract to engage an environmental engineering firm for site assessments related to properties governed by the Defense Site Memorandum of Agreement. This effort is part of FY26 planning and aims to support environmental compliance and remediation activities on defense-related sites under the jurisdiction of the District. The work will involve conducting detailed environmental evaluations to identify potential contamination, assess risks, and generate data necessary for remedial planning and regulatory reporting in alignment with federal and local environmental standards. The contract will be awarded to a qualified firm capable of delivering professional environmental site assessment services, including but not limited to preliminary site inspections, sampling, data analysis, and preparation of technical reports. Although specific details such as set-aside provisions, NAICS code, or point of contact are not yet available, the work will be performed within the District of Columbia and is directly tied to fulfilling obligations under the Defense Site Memorandum of Agreement. The opportunity was posted on July 23, 2026, and interested vendors should monitor official procurement channels for upcoming solicitations that will provide further requirements, timelines, and submission criteria.

Energy and Environment (DOEE)

POSTED

about 9 hours ago

DEADLINE

FY26-DOEE-WPD-Pinehurst Design and EA (WPD)The contract pertains to the completion of an environmental assessment and design work for the Pinehurst Branch project under the District of Columbia’s Department of Energy and Environment for fiscal year 2026. The scope involves comprehensive environmental evaluation and engineering design activities necessary to advance the project toward implementation, ensuring compliance with regulatory and environmental standards. The work will be performed within the District of Columbia, although specific location details are not provided. This forecasted opportunity is posted by the Energy and Environment agency and is intended to solicit qualified vendors or consultants to carry out the assessment and design tasks. There is no current solicitation number or set-aside designation specified, indicating that the procurement is still in the planning phase and may be subject to changes prior to formal release. The posting date reflects the forecast notification timeline, and no point of contact information is included, suggesting further details will be released in subsequent solicitations.

Energy and Environment (DOEE)

POSTED

about 9 hours ago

DEADLINE

AQD PilotThe Clean Construction Pilot is a forecasted initiative by the District of Columbia’s Energy and Environment Agency aimed at advancing sustainable construction practices. Though specific details such as NAICS code, set-aside type, and place of performance are not yet defined, the effort is expected to focus on promoting clean, low-emission construction methods within the District. This pilot program signals a strategic move by the agency to align infrastructure development with environmental goals, potentially incorporating energy efficiency, waste reduction, and cleaner vehicle usage on job sites. The posting date indicates the initiative is in early planning stages, with no formal solicitation yet issued. Interested parties should monitor the official portal for upcoming opportunities, as the program may evolve into a competitive procurement or partnership opportunity later in 2026.

Energy and Environment (DOEE)

POSTED

about 9 hours ago

DEADLINE

More opportunities from Department Of Defense → SUBSISTENCE FSE SUPPLY CHAIN

Same awarding agency

Small Business and Veteran Employment Reporting SupportThe contract supports veteran employment reporting requirements under FAR 52.222-37 by providing services to collect, manage, and submit necessary data through the EVTAR or VETS-4212 reporting systems. This effort ensures compliance with federal obligations related to veteran employment metrics and requires accurate and timely reporting to meet regulatory standards. The work is structured as a subcontract under NAICS code 541611, which corresponds to management consulting services, indicating the need for specialized administrative and analytical support to fulfill reporting obligations. The solicitation was posted on July 22, 2026, with a response deadline of July 28, 2026, and is administered by the Subsistence FSE Supply Chain under the Department of Defense. The place of performance and point of contact details are not specified, suggesting work may be performed remotely or at the discretion of the offeror, provided reporting deliverables are met. The absence of a set-aside designation implies this opportunity is open to all eligible contractors, with no preference given to small businesses or veteran-owned concerns. The UI link indicates the solicitation is hosted on the DIBBS platform, and all submissions must be processed through that system.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Packaging, Labeling, and Logistics SupportThe contract requires full compliance with MIL-STD-129 standards for packaging, labeling, and palletization of government-issued materiel, ensuring all items are properly marked, arranged, and secured for military transport and storage. All activities must align with RP001 guidelines to meet strict defense logistics requirements, including accurate barcoding, container identification, and pallet configuration that supports automated handling and inventory tracking systems. The subcontractor is responsible for assembling and verifying all shipping documentation to ensure seamless movement of goods through the Department of Defense supply chain. This is a subcontract under the NAICS code 493190, classified under the Subsistence FSE Supply Chain within the Department of Defense, with a response deadline of July 28, 2026. Performance is expected to support federal logistics operations, though the exact place of performance is not specified. The solicitation is part of a broader effort to maintain end-to-end visibility and standardization in defense shipping, requiring precise adherence to technical specifications and regulatory compliance without deviation. The contract’s structure emphasizes reliability, traceability, and timeliness in delivering critical supplies under stringent military conditions.

Other Warehousing and Storage

POSTED

DEADLINE

Supply of Full-Size Perforated Steam Table Pans (NSN 7310-01-390-2620)The contract calls for the manufacture or supply of 24 full-size perforated 20-gauge stainless steel steam table pans designated by NSN 7310-01-390-2620, adhering strictly to military packaging and material standards to ensure durability, hygiene, and compliance with federal specifications. The pans must be produced to exact military-grade tolerances, with perforations designed to facilitate proper steam circulation and food service efficiency in institutional or field settings. All items are subject to stringent quality control requirements consistent with Department of Defense standards, and delivery must meet defined logistics and packaging protocols to ensure integrity during transit and storage. The contract is posted as a subcontract under the NAICS code 332322, which pertains to fabricated metal product manufacturing, and is managed by the Subsistence FSE Supply Chain under the Department of Defense. The solicitation opened on July 22, 2026, with a response deadline of July 28, 2026, indicating a short turnaround window for submissions. The place of performance and point of contact details are unspecified in the documentation, but the contract is accessible through the DIBBS portal, where interested vendors can obtain full technical specifications and submission requirements. Bidders must ensure alignment with all military procurement guidelines and be prepared to provide documentation verifying material authenticity, manufacturing capability, and compliance with relevant defense standards.

Sheet Metal Work Manufacturing

POSTED

DEADLINE

REFRIGERATOR, MECHANThe contract is for a single unit of a mechanical refrigerator with part number TR2R-2S and NSN 4110015663460, designated as TRUE FOOD SERVICE EQUIPMENT 0DWS4 for use on naval vessels. The item must comply with strict technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which take precedence over all other specifications including ASTM D3951. Only approved refrigerants R134A and R404A are permitted; R290A is strictly prohibited due to its flammable nature. All packaging and labeling must follow MIL-STD-129 and DLA Packaging Requirements, with palletization adhering to RP001 specifications. The delivery is FOB destination within 20 days of contract award, with no tolerance for quantity variance, and inspection and acceptance occur upon arrival. The unit must be shipped by traceable freight methods only, excluding parcel post. The delivery destination and shipping address is the USPFO facility in East Greenwich, Rhode Island, with a required delivery date of July 20, 2026. The contract is issued under solicitation SPE3SE-26-T-1049, falls under NAICS code 333241, and is managed by the Department of Defense’s Subsistence FSE Supply Chain. Contact for inquiries is Madelyn Kane, with detailed compliance and tracking information provided through government-specific codes including TCN, RDD, and DIC identifiers.

Food Product Machinery Manufacturing

POSTED

DEADLINE

TOASTER, ELECTRICThe contract specifies the procurement of one electric toaster with part number CTS1000 and NSN 7310016287230 under solicitation SPE3SE-26-T-1048, issued by the Department of Defense’s Subsistence FSE Supply Chain. Delivery is required within 20 days to a military address at USS Tripoli LHA 7, FPO AP 96694-2900, with delivery terms FOB destination and no variance allowed in quantity. The item must comply with DLA’s Master List of Technical and Quality Requirements, which override all other standards including ASTM D3951, and must be packaged and labeled per MIL-STD-129 with palletization adhering to RP001. Mercury or mercury-containing compounds are strictly prohibited in or on the product except for limited exceptions such as functional batteries or specified instruments, and any portable fluorescent lamps must be shockproof with a secondary containment barrier in accordance with NAVSEA 5100-003D. Inspection and acceptance occur at the destination, and all packaging must reflect the specified unit of issue and quantity per unit pack. The contract also incorporates Covered Defense Information requirements and mandates compliance with DLA’s transportation and shipping procedures, including references to DLAD PROC NOTES C19 and C20. The point of contact is Khuong Nguyen, and the response deadline for the solicitation is July 27, 2026, with an original required delivery date of July 20, 2026.

Food Product Machinery Manufacturing

POSTED

DEADLINE

SENSOR CABINETThe SENSOR CABINET contract, issued under solicitation SPE3SE-26-T-1047, requires the delivery of one unit identified by NSN 4110-01-632-3232 and part number RWTS16, with a firm delivery deadline of 20 days from award and a required delivery date of July 20, 2026. The item must be shipped FOB destination with zero quantity variance and inspected and accepted at the delivery point. Packaging must comply with ASTM D3951, but is subject to precedence by the DLA Master List of Technical and Quality Requirements, with all packaging and labeling conforming to MIL-STD-129 and palletization following RP001 procurement standards. Shipping is to be made via traceable means, explicitly prohibiting parcel post, and must be routed to the designated delivery address in Norfolk, Virginia. The contract incorporates specific DLA procedural notes for vessel shipments and transportation, and includes mandatory government-use identifiers and tracking codes such as RDD 777, M/F TCN V466076195GF23, and project code 478 TP 2. The supplier is bound by federal procurement directives with full compliance expected for technical, packaging, labeling, and delivery requirements, and all referenced technical standards take absolute precedence over general commercial practices.

Food Product Machinery Manufacturing

POSTED

DEADLINE

PAN, STEAM TABLEThe contract pertains to the procurement of 40 units of a PAN, STEAM TABLE identified by NSN 7310-01-107-1141 under Purchase Request 7017084544, with a solicitation number SPE3SE-26-Q-0397. The solicitation was posted on July 22, 2026, and responses are due by July 27, 2026, with delivery required within 30 days of award. The item is procured under a fully competitive process in accordance with a military or federal specification or standard, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements accessible via the DLA website, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The contract is issued by the Department of Defense, specifically the Subsistence FSE Supply Chain, with Nicholas D’Aulerio listed as the primary point of contact. Government identification must be removed from any non-accepted supplies, and all provisions are subject to the DLA packaging requirements outlined in RP001 and incorporated technical specifications referenced by R or I numbers.

Other Commercial Equipment Merchant Wholesalers

POSTED

DEADLINE

FUEL ADAPTER, MBUThe contract specifies the procurement of 146 units of the Fuel Adapter, MBU, identified by NSN 7310-01-455-3736, under solicitation SPE3SE-26-Q-0398, with a firm fixed price and no variance allowed in quantity. Delivery is required within 30 days after award, with inspection and acceptance occurring at the destination. All supplies must be packaged in compliance with ASTM D3951, but DLA’s Master List of Technical and Quality Requirements take precedence and must be followed explicitly. Packaging and labeling must adhere to MIL-STD-129, and palletization must conform to RP001 DLA Packaging Requirements for Procurement. The item must be shipped to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with transportation details governed by DLAD Proc Notes C19 and C20. The government retains the right to remove its identification from non-accepted supplies, and covered defense information may apply. The contract is issued under the DoD unit of issue system, and the referenced unit of issue and purchase unit data must be consulted via the official DLA link. The purchase request number is 7016620583, and the material need ship date is August 8, 2026.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

WELL, HOT FOOD, SOUPThe contract pertains to the procurement of a single unit of hardware identified by NSN 7310-01-496-4525, described as WELL, HOT FOOD, SOUP, to be delivered within 20 days to USS RONALD REAGAN CVN 76 at FPO AP 96616. Delivery is FOB destination with no tolerance for quantity variance, and inspection and acceptance occur at the destination. All packaging must comply with ASTM D3951 and be marked and labeled per MIL-STD-129, with palletization following DLA’s RP001 packaging requirements, prioritizing the DLA Master List of Technical and Quality Requirements. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with supplied hardware, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical analysis reagents specifically authorized by NAVSEA; portable devices containing mercury must be shock-proof and feature a secondary containment boundary per NAVSEA 5100-003D. The procurement is governed by DLA’s eProcurement standards, with technical and quality requirements referenced by R or I numbers incorporated from the DLA Master List. The contract is issued under solicitation SPE3SE-26-T-1051, with an original required delivery date of July 24, 2026, and transportation logistics are subject to DLAD Proc Notes C19 and C20. The unit of issue is EA, priced at $1.00, and the supplier is designated under DLA vendor codes with specific shipping and project identifiers.

Food Product Machinery Manufacturing

POSTED

DEADLINE

ICE MAKING MACHINE,The contract calls for the procurement of a single ice making machine, model WCC500A or WCC500AS, compliant with U.S. Navy shipboard standards and approved for use on naval vessels. The unit must operate on 115V AC, 60 Hz, single phase, use R404A refrigerant exclusively, and meet specified dimensional requirements of 14.5 inches wide by 24.5 inches high by 25 inches deep. It must include a Marine Water Leveler 20000001 and comply with strict prohibitions against intentional use of mercury or mercury-containing compounds in or on any supplied hardware, with limited exceptions for specific functional components like batteries, fluorescent lights, sensors, or chemical reagents authorized by NAVSEA. Fluorescent lamps containing mercury must be shockproof and doubly contained per NAVSEA 5100-003D. The machine must conform to all DLA Master List of Technical and Quality Requirements, which override other standards such as ASTM D3951, and packaging must adhere to MIL-STD-129 labeling and RP001 palletization directives. Delivery is FOB destination within 20 days of contract award, with no variance allowed in quantity, and inspection and acceptance occur at the point of delivery. The sole delivery address is USS Montgomery LCS 8, FPO AP 96692, with shipping required via traceable means, prohibited from parcel post. The NSN is 4110-01-453-2373, referenced under solicitation SPE3SE-26-T-1050, with a required delivery date of July 24, 2026. The contract is under the Department of Defense’s Subsistence FSE Supply Chain, with primary point of contact Lauren Breisch.

Food Product Machinery Manufacturing

POSTED

DEADLINE

PAN, STEAM TABLEThe contract pertains to the procurement of a full-size steam table pan with perforations, manufactured from 20-gauge material, identified by NSN 7310-01-390-2620, with a total quantity of 24 boxes required. The procurement is conducted under a fully competitive process in accordance with military and federal specifications, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the designated DLA website. Compliance with applicable revisions is determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions, with amendments overriding the original revision if issued. The government mandates the removal of any government identification from supplies that are not accepted. The solicitation, numbered SPE3SE-26-Q-0399, was posted on July 22, 2026, with responses due by July 28, 2026, and delivery must be completed within 30 days of award. The contracting entity is the Department of Defense’s Subsistence FSE Supply Chain, with primary point of contact Nicholas D’Aulerio, reachable via email and phone. The contract is subject to Covered Defense Information requirements, indicating sensitivity around handling and safeguarding data.

Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

DEADLINE

Supply of Left Hand Door Plate (NSN 7310015831320)

Sheet Metal Work Manufacturing

POSTED

DEADLINE