Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

HEATER, WATER, ELECTRIC

Active
SPE8E8-26-T-4986Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of two electric water heaters identified by NSN 4520-01-486-2925 under solicitation SPE8E8-26-T-4986, with a total delivery timeline of 167 days from award. This is a total small business set-aside as defined by FAR 19.5, categorized under NAICS code 333414, and managed by the Department of Defense through the DLA New Cumberland Facility. All supplies must comply with DLA’s Master List of Technical and Quality Requirements referenced by R and I numbers, with the applicable revision controlled by the solicitation issue date due to the simplified acquisition nature. Strict prohibitions are in place against the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific exempted uses such as batteries, fluorescent lights, sensors, weapon systems, and NAVSEA-specified reagents; any portable devices containing mercury must be shockproof and include a secondary containment boundary as per NAVSEA 5100-003D. Additionally, government identification must be removed from non-accepted supplies. The solicitation was posted August 5, 2026, with responses due by August 17, 2026, and the primary point of contact is Alexis Selby of DLA, reachable via phone or email provided.

General Info

Procurement of two electric water heaters under small business set-aside, 167-day delivery, DLA New Cumberland, mercury restrictions apply.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

333414 - Heating Equipment (except Warm Air Furnaces) ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(1)

RFQ SPE8E8-26-T-4986 for DLA Troop Support Construction & Equipment

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Alexis Selby
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HEATER,WATER,ELECTRIC
HEATER,WATER,ELECTR
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
ADEQUATE DATA FOR NSN/Part Number: 4520-01-486-2925 Quantity: 2 EA Purchase Request: 7017757492QTY: 2 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333414
New
DIBBS
IMPELLER, FAN, AXIAL
Solicitation # SPE8E7-26-T-3511
The item sought is an axial fan impeller, identified by NSN 4140-01-561-8011, with a quantity of 21 units, required as a component of an Uninterruptible Power Supply within the Vestdavit RIB Davit System on LCS-1 vessels. Though the UPS is manufactured by GE INV, procurement must use Vestdavit’s part number 12271 through their government distributor, Scan Pacific Northwest LLC, with CAGE code 3ESE0. The solicitation, issued under contract number SPE8E7-26-T-3511, is governed by DLA packaging and technical quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. All supplies must comply with the requirement to remove government identification from non-accepted items. Delivery is due in 167 days after award, and the place of performance is New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. The NAICS code 333414 applies, and the contracting office is the DLA New Cumberland Facility under the Department of Defense, with Kelly Mitchell listed as the primary point of contact.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
HEATING BLANKET, ELE
Solicitation # SPE8E8-26-T-5047
The contract is for the procurement of seven electric heating blankets identified by NSN 4520-01-708-1124 and part number T00233-5083-2 from Robertson Manufacturing Inc, with a unit price of $7.00 per unit and a total contract value of $49.00. Delivery is required FOB origin within 167 days from the contract award, with zero tolerance for quantity variance, and all items must be inspected and accepted at the destination. Packaging must comply with ASTM D3951 unless superseded by stricter requirements from the DLA Master List of Technical and Quality Requirements, which take precedence. All packaging and labeling must conform to MIL-STD-129, and palletization must meet DLA Packaging Requirements for Procurement, with the Unit of Issue specified as each and the Quantity per Unit Pack set to 1. The shipment must be delivered to the designated receiving warehouse in Tracy, California, following DLA Transportation Procurement Notes C19 and C20. The original required delivery date is March 28, 2027, with a need ship date of February 1, 2027, under solicitation SPE8E8-26-T-5047, which was posted on August 5, 2026, and closed on August 17, 2026. The contracting agency is the Department of Defense, specifically DLA District San Joaquin, with Alexis Selby listed as the primary point of contact.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
IMPELLER, FAN, CENTRIFUG
Solicitation # SPE8E7-26-T-3494
This contract specifies the procurement of a centrifugal fan impeller identified by part number ES9500-6354, with an approved source code of 0V5R4 under Snowbird Technologies Inc. The item is governed by technical and quality requirements from the DLA Master List, which take precedence over all other standards including ASTM D3951, and must be packaged and labeled in strict compliance with MIL-STD-129 and DLA packaging guidelines as outlined in RP001. The part is tied to a specific drawing revision A dated 10/20/2011 and is associated with the government NSN 4140015924133. The contract requires delivery of ten units FOB origin with zero allowable variance in quantity and inspection and acceptance to occur at the destination warehouse in Tracy, California. Packaging must conform to ASTM D3951 unless overridden by higher-priority DLA requirements, and all units must be palletized per DLA specifications. The delivery timeline mandates fulfillment within 124 days, with an original required delivery date of January 12, 2027, and a need ship date of December 20, 2026. The contract is issued under solicitation SPE8E7-26-T-3494 with a unit price of $10 per unit and a total value of $100. Transportation and shipping logistics are governed by specific DLA procedural notes, and all documentation and labeling must adhere to government protocols including the removal of government identification from non-accepted items. The point of contact for procurement inquiries is Kelly Mitchell of the Department of Defense, DLA District San Joaquin.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
BURNER ASSEMBLY, SPA
Solicitation # SPE8E8-26-T-5036
The contract pertains to the procurement of 23 burner assemblies for spa applications, identified by NSN 4520-01-690-4732 and part numbers associated with Webasto, Volvo, and Arquus. The unit price is $23.00 per unit, with a total contract value of $529.00, and delivery is required within 167 days from the contract award, with an original delivery target of November 22, 2026, and a need ship date of February 1, 2027. Delivery is FOB origin, inspection and acceptance occur at destination, and no quantity variance is permitted. All items must comply with technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 labeling and RP001 DLA packaging standards, with palletization following specified guidelines. Items must be marked with government identification unless rejected, and covered defense information provisions apply. The contract is issued under solicitation SPE8E8-26-T-5036, with the delivery address designated as the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation procedures governed by DLAD Proc Note C19 and C20.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
HEATER, WATER, ELECTRIC
Solicitation # SPE8E8-26-T-5045
The contract is for a single electric water heater identified by NSN 4520-12-317-7848 and part number 0002035996, sourced from manufacturers including NAVANTIA PROPULSION Y ENERGIA and MTU Friedrichshafen GmbH. It is issued under solicitation SPE8E8-26-T-5045 with a required delivery deadline of 167 days from award, and delivery must occur FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the destination, and the item must be packaged per ASTM D3951, with labeling and palletization strictly following MIL-STD-129 and DLA packaging requirements, which supersede any conflicting standards. The item is subject to all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and Covered Defense Information regulations may apply. Delivery is directed to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with an original required delivery date of January 14, 2027, and a need ship date of February 1, 2027. The unit of issue is each, priced at one unit, and transportation logistics align with DLA procedural notes C19 and C20. The solicitation was posted August 5, 2026, with responses due by August 17, 2026, under NAICS code 333414, and the contracting office is the Department of Defense, San Diego, with primary contact Alexis Selby.
SAN DIEGO

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
HEATING ELEMENT, ELECTR
Solicitation # SPE8E8-26-T-4974
The contract specifies the procurement of a nonimmersion electrical heating element manufactured by Chromalox Inc with part number 118-056222-057 and NSN 4520-01-137-2469, for a quantity of six units. All units must be packaged in strict accordance with MIL-STD-2073-1E, including specific packaging methods, materials, and markings compliant with MIL-STD-129, with no special marking required. Terminals must be sealed with silicone resin to prevent moisture ingress during transit or storage, and this compound must dissipate upon initial power application. The supply is strictly prohibited from containing intentional mercury or mercury compounds except under narrowly defined exceptions such as functional use in batteries, fluorescent lights, sensors, or instrument controls approved by NAVSEA, with portable mercury-containing items requiring shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. Delivery is FOB origin with zero tolerance for quantity variance and inspection and acceptance occurring at the destination. The required delivery date is December 12, 2026, with a 167-day delivery window, and the shipment must arrive at the designated warehouse in Tracy, CA. The contract falls under DLA procurement regulations incorporating technical and quality standards from the DLA Master List, and covered defense information provisions apply. Transportation and shipping are governed by specific DLA procedural notes, and the contract is issued under solicitation SPE8E8-26-T-4974 with a unit price of $6.00 per item for a total value of $36.00.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
IMPELLER, FAN, AXIAL
Solicitation # SPE8E7-26-T-3486
The contract pertains to the procurement of an axial fan impeller, identified by NSN 4140-01-562-0499 and part numbers 500K3354 and 500K3345 from HDT Expeditionary Systems Inc and KECO Industries Inc respectively. A total quantity of 12 units is required at a unit price of $12.00, with the total contract value reflecting this amount. Delivery is due within 167 days of contract award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination location, and all items must be packaged in accordance with ASTM D3951 and marked per MIL-STD-129, with palletization strictly following DLA’s packaging requirements. Technical and quality standards referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, which override any conflicting specifications. The item is designated for delivery to the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, though the original delivery requirement was January 5, 2027. Transportation and shipping instructions are governed by specific DLA procedural notes, and all documentation must comply with applicable defense information handling protocols. The solicitation, identified as SPE8E7-26-T-3486, was issued on August 5, 2026, with responses due by August 17, 2026, under a NAICS code of 333414 for industrial machinery manufacturing.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
HEATING ELEMENT, ELE
Solicitation # SPE8E8-26-T-5071
The contract pertains to the procurement of a heating element identified by part number 2194075 from DELFIELD CO and 801-3866 from ALLPOINTS FOODSERVICE PARTS, with the NSN 4520016999873, under solicitation SPE8E8-26-T-5071. A total of 30 units are required at a unit price of $30.00, resulting in a total contract value of $900.00, with delivery due in 167 days from the contract award, FOB origin, and inspection and acceptance occurring at the destination. The solicitation is a total small business set-aside under NAICS code 333414, with a response deadline of August 17, 2026, and is issued by the Department of Defense through the DDSP New Cumberland Facility. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards, including ASTM D3951. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements, with palletization following RP001 specifications. The delivered items must be labeled and marked according to federal guidelines, and the unit of issue is each, with no variance permitted in quantity. All supplies must be shipped to the designated DLA distribution facility in New Cumberland, Pennsylvania, and transportation is governed by DLAD Proc Notes C19 and C20. The original required delivery date was November 14, 2026, with a need ship date of February 1, 2027.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
HEATING ELEMENT, ELE
Solicitation # SPE8E9-26-T-3309
The contract specifies the procurement of 12 electrical immersion heating elements, each 26 inches long with a screw plug at the end, identified by NSN 4520-01-062-7355. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. Vendor compliance includes adherence to DLA packaging standards and the mandatory removal of government identification from non-accepted supplies. Traceability documentation may waive the need for source inspection. This is a total small business set-aside under NAICS code 333414, managed by the Department of Defense’s Construction & Equipment MRO Service I. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and delivery is required within 579 days after award. The point of contact is Matthew Kruc, with performance delivery to New Cumberland, PA, 17070-5002.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
HEATING ELEMENT, ELE
Solicitation # SPE8E8-26-T-5007
This contract specifies the procurement of a 7.5 kW electrical heating element rated at 480 volts AC, designed for use on the Insinger Machine Co. Model 60-20M-NSU-RH dishwashing machine, with part number 1000-04033 and NSN 4520013100693. The requirement is for 46 units to be delivered within 62 days under contract SPE8E8-26-T-5007, with delivery terms FOB origin and inspection and acceptance points at the destination. All supplies must comply with DLA packaging requirements including MIL-STD-2073-1E and MIL-E-17555, and marking must follow MIL-STD-129 with no special marking codes applied. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds in or on any supplied hardware, with limited exceptions for functional uses in batteries, fluorescent lights, sensors, controls, weapon systems, and approved chemical reagents; any portable devices containing mercury must be shockproof and feature a secondary containment system per NAVSEA 5100-003D. The solicitation is a total small business set-aside under NAICS code 333414, with a response deadline of August 17, 2026, and the specified delivery origin is the DLA Distribution facility in New Cumberland, Pennsylvania.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
FIXTURE, LIGHTING
Solicitation # SPE8E7-26-T-3499
The contract specifies the procurement of a lighting fixture with NSN 6210015953992 and part number 300L-15G, under solicitation SPE8E7-26-T-3499, for a quantity of 28 units at a unit price of $28.00, totaling $784.00. Delivery is required within 167 days from the contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, and all packaging and marking must adhere to DLA’s RP001 requirements and MIL-STD-129 guidelines, with no special marking codes applied. Palletization, parcel post address, and freight shipping destination are all directed to the DDSP New Cumberland Facility in New Cumberland, Pennsylvania. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. The unit of issue is each (EA), and no quantity variance is permitted. The required delivery date is March 15, 2027, with a need ship date of February 1, 2027. The contracting officer is Kelly Mitchell, and the solicitation was issued on August 5, 2026, with responses due by August 17, 2026. The NAICS code is 333414, and the agency is the Department of Defense.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
HEATING ELEMENT, ELECTR
Solicitation # SPE8E8-26-T-4963
This contract specifies the procurement of an electrical immersion heating element with precise technical parameters: a tubular body measuring 16.688 inches overall length and 14.00 inches active length, operating at 440.0 volts AC, 60 hertz, with a maximum power rating of 1200.0 watts and 0.688 inch terminal length. The item is identified by NSN 4520-00-802-8302 and part number F124403ES and is designated as a critical application item. The contract mandates strict adherence to DLA packaging requirements under RP001 and MIL-STD-2073-1E for preparation, with packaging marked according to MIL-STD-129 and no special marking codes applied. The heating element must be furnished without intentional addition of mercury or mercury-containing compounds, except for specific functional uses in batteries, fluorescent lights, sensors, or weapon systems as permitted under NAVSEA 5100-003D, with portable devices containing mercury requiring shockproof construction and a secondary containment boundary. The contract requires delivery of seven units FOB origin within 167 days, with zero variance allowed in quantity, inspection and acceptance occurring at destination. The delivery address is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, and shipping must comply with DLAD Proc Notes C19 and C20. The contract is a total small business set-aside under NAICS code 333414, originally solicited with a response deadline in August 2026 and an awarded need ship date of February 1, 2027.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 332216
New
DIBBS
HEATING UNIT, INFRAR
Solicitation # SPE8E5-26-T-3844
The contract is for the procurement of four heating units, infrared type, under NSN 3439-01-436-9799, with a delivery requirement of 167 days after date of award. The solicitation number is SPE8E5-26-T-3844, issued on August 5, 2026, with responses due by August 17, 2026, and is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside provision. The procurement is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance specified at New Cumberland, Pennsylvania, zip code 17070-5002. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA packaging standards, and government identification must be removed from any non-accepted items. Only products explicitly named and identified by part number in the purchase order are considered acceptable, with no alternative substitutes permitted. The item has no shelf life limitation. Primary point of contact is Ira Hedgepeth, reachable via email and phone provided in the contract data.
Saw Blade and Handtool Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FILTER, AIR, ELECTROS
Solicitation # SPE8E8-26-T-5042
The contract is for the procurement of 29 units of AIR FILTER, ELECTROS with NSN 4460-01-692-2652 under solicitation SPE8E8-26-T-5042, issued as a total small business set-aside under NAICS code 333413. Delivery is required within 167 days of award, with shipments to be furnished FOB origin and inspected and accepted at destination, with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation, wrapping, and marking requirements, with no special marking codes applied, and palletization must follow DLA packaging standards. The supplies are to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and the original delivery deadline was October 28, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date or award date controls depending on acquisition size. The contract incorporates provisions for potential coverage of covered defense information and requires adherence to DLA transportation and freight procedures. The point of contact for this procurement is Alexis Selby of the Department of Defense.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
GAGE, PROFILE
Solicitation # SPE8E5-26-T-3780
The contract pertains to the procurement of 12 GAGE, PROFILE units under solicitation SPE8E5-26-T-3780, with a response deadline of August 17, 2026, and a delivery requirement within 167 days after order. The item is identified by NSN 5220-00-446-8307 and is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Item Unique Identification (IUID) compliance is mandatory in accordance with MIL-STD-130 and the DFARS 252.211-7003 clause. The contractor must be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified through a qualified third-party assessment organization. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires prior government authorization. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of DOD export control training, and approval from the DLA controlling authority. The contracting office is the DLA New Cumberland Facility, with primary point of contact Khue Nguyen, and the place of performance is listed as New Cumberland, PA, 17070-5002. There is no shelf life requirement for this item.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 323117
New
DIBBS
MARKER, IDENTIFICATION
Solicitation # SPE8E6-26-T-4066
This contract pertains to the procurement of a Marker, Identification with NSN 7690-01-290-0175 and part number TKG0896-1, supplied by FRUEHAUF CORP, and is governed by stringent DLA packaging and quality requirements. The item is classified as a critical application item with a non-extendable Type I shelf life of 24 months, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, including the special marking code 32 for shelf-life identification. Packaging and palletization must adhere to DLA’s official procurement standards, and the item must be delivered FOB origin with no quantity variance allowed. Delivery is required within 36 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The unit of issue is PG, with a total quantity of 21 units, and the contract references technical and quality requirements from the DLA Master List, applicable as of the solicitation issue date. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the contract is issued under solicitation SPE8E6-26-T-4066 with a response deadline of August 17, 2026, and an original required delivery date of August 5, 2026.
Books Printing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 321114
New
DIBBS
CORROSION PREVENTIVE C
Solicitation # SPE8ES-26-T-2509
This contract solicits a corrosion preventive compound identified by NSN 8030-01-722-1433 and part number ETCPRTU-2B3C from Chemeon Surface Technology, LLC, with a quantity of 5 containers delivered FOB destination under solicitation SPE8ES-26-T-2509. The item is classified as a Type 2 (Code 6) shelf life item with a 24-month extendable shelf life, subject to specific packaging and marking requirements outlined in MIL-STD-2073-1E and MIL-STD-129, including the Special Marking Code 33 for Type II shelf life. Packaging must comply with DLA procurement standards and the Hazardous Materials Packaging, Marking, and Shipping requirements, with all hazardous material documentation—including Safety Data Sheets and labeled containers—aligned with OSHA’s revised Hazard Communication Standard (29 C.F.R. 1910.1200) effective June 1, 2015. Suppliers must submit SDS and compliant labels for approval prior to award and ensure employee training on the new standards. The item must be delivered within 173 days of contract award, with a required delivery date of October 15, 2026, and a need ship date of February 1, 2027. Delivery is to the DLA Distribution facility at New Cumberland, Pennsylvania, with a strict zero variance in quantity and inspection and acceptance occurring at the destination. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and the applicable revision depends on the solicitation or award date. All units of issue follow DoD authorized standards as aligned with ANSI X12.
Wood Preservation

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
CASE, STORAGE AND TR
Solicitation # SPE8E6-26-T-4056
The contract pertains to the procurement of 35 units of a specific item identified by NSN 4240-01-654-9843 and part number 940210, with a unit price of $35.00, totaling $1,225.00. Delivery is required within 15 days of the contract award, FOB origin, with no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit containerization per DLA’s requirements. Marking must adhere to MIL-STD-129 with no special marking codes applied, and palletization must follow DLA’s packaging standards. The product must be shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLA procedural notes C19 and C20. The item is subject to Defense Logistics Agency packaging requirements and technical standards referenced in the DLA Master List of Technical and Quality Requirements. The contract incorporates cybersecurity requirements mandating a CMMC Level 2 self-assessment and applies to covered defense information. The solicitation number SPE8E6-26-T-4056 was issued with a response deadline of August 17, 2026, and an original delivery target of September 19, 2026. The need ship date is set for August 5, 2026, indicating the timing for readiness. Performance occurs at the DLA New Cumberland facility, and all technical and quality standards referenced are controlled by the DLA Master List revision in effect on the RFP issue date. Inspection and acceptance occur at the destination point, and the contractor must be prepared to remove any government identification from non-accepted supplies. The ordering activity is the Department of Defense, with primary point of contact John Lieb at DLA, and the North American Industry Classification System code is 339113.
Surgical Appliance and Supplies Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-26-T-2502
The contract specifies the procurement of 3 cases of 50-milliliter adhesive units, part number DP-460 from 3M Company, identified by NSN 8040-01-642-2514, with each case containing twelve units. The product is amber and off-white in color and must comply with a non-extendable 24-month shelf life requirement for a Type I (Code M) item. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with special labeling indicating Type I shelf life, and palletization must follow DLA packaging standards. Delivery is FOB destination, with a required delivery date of January 25, 2027, and a lead time of 173 days, subject to zero variance in quantity. The adhesive is classified as a hazardous material, requiring full compliance with OSHA’s revised Hazard Communication Standard, including submission of Safety Data Sheets (SDS) and approved HCS or CPSA/FHSA-compliant labels prior to award, along with employee training on the new requirements. Storage must be maintained between 60-80°F (15-27°C) to preserve shelf life. Technical and quality requirements are governed by the DLA Master List, and the contract incorporates provisions for handling covered defense information. All deliveries must be sent to the DLA Distribution facility in New Cumberland, Pennsylvania, and shipping logistics must follow DLAD procedural notes C19 and C20.
Adhesive Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336611
New
DIBBS
RAMP ASSY CORNER RH
Solicitation # SPE8E5-26-T-3818
This contract covers the procurement of 16 units of RAMP ASSY CORNER RH, identified by NSN 5440-01-553-0684 and part number 7017757152, under solicitation SPE8E5-26-T-3818. The item must be manufactured and delivered in strict compliance with technical specifications referenced from the DLA Master List of Technical and Quality Requirements, including welding and liquid penetrant nondestructive inspection standards per AWS D1.2. A certificate of conformance is required unless waived by a quality assurance letter of instruction, and all components must adhere to dimensional and assembly directives, particularly the prohibition against welding the strut base P12 to the gusset plate P18 as shown on the drawing; instead, P12 must be packaged separately with an instruction sheet included in each ramp assembly. The product must be packaged per ASTM D3951 and labeled in accordance with MIL-STD-129, with palletization following DLA packaging requirements, and all packaging marked with the specified unit of issue and quantity per unit pack. Mercury and mercury-containing compounds are strictly prohibited unless exceptions apply for batteries, instruments, or weapon systems, and must meet secondary containment and shock-proof standards per NAVSEA 5100-003D. The contract mandates full compliance with federal safety regulations, including the submission of Safety Data Sheets and Hazard Communication Standard labels updated to the Globally Harmonized System, effective June 1, 2015, with supplier employee training required on these changes. Delivery is FOB origin with inspection and acceptance occurring at destination, and must be completed within 167 days of contract award, with a required ship date of February 1, 2027, and original delivery deadline of October 24, 2027. No quantity variance is permitted, and all items must be shipped to the DDSP New Cumberland Facility in Pennsylvania. The solicitation is a total small business set-aside under NAICS code 336611, with drawings available via DIBBS during the open solicitation period. The contract incorporates FAR clauses for inspection, conformance, and standard requirements, and all documentation, including technical data packages and revisions referenced, must align with the specified drawing revisions and dated configurations.
Ship Building and Repairing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
LIGHT, COCKPIT, AIRCRAFT
Solicitation # SPE8E7-26-T-3487
This contract pertains to the procurement of aircraft cockpit lighting components under solicitation SPE8E7-26-T-3487, issued by the Department of Defense through the DDSP New Cumberland Facility. The item, identified by NSN 6220-01-563-8636 and part number 937-000-10M, is supplied by Luminator Holding L.P and Leonardo Spa Helicopters Division, with a total quantity of 13 units at a unit price of $13.00, resulting in a total contract value of $169.00. Delivery is required within 153 days from the contract date, with FOB origin terms, and inspection and acceptance occur at the destination. Packaging must comply with DLA Master List of Technical and Quality Requirements, particularly RP001 for packaging standards, MIL-STD-129 for marking and labeling, and either TQ requirement IP025 for hazardous materials per FED-STD-313 or ASTM D3951 for non-hazardous commercial packaging, with the DLA standards overriding ASTM where applicable. All packaging must reflect the specified Unit of Issue and Quantity per Unit Pack, and palletization must adhere strictly to DLA guidelines. The contract is a total small business set-aside under NAICS code 333515, with a response deadline of August 17, 2026, and was posted on August 5, 2026. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, with a required ship date of January 18, 2027, and an original delivery deadline of February 27, 2027. No quantity variance is permitted. Transportation instructions are governed by DLAD Proc Note C19 for general shipment and C20 for first destination handling. Documentation for source approval and handling of covered defense information is required as stipulated by RC001 and RD003. All technical and quality requirements referenced via R or I numbers in the DLA Master List take precedence over any other standards. The primary point of contact for the contract is Kelly Mitchell, reachable via email and phone provided.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
SHEETING, REFLECTIVE
Solicitation # SPE8E5-26-T-3781
Reflective sheeting meeting specification 3M ScotchLite 3271, 24 inches nominal width by 50 yards nominal length, is procured under contract SPE8E5-26-T-3781 with NSN 9390-00-501-5145 and part number 7000030797. The contract requires 14 rolls, each defined as one RO equal to 50 yards, with no variance allowed in quantity. Delivery is FOB origin and must be completed within 167 days of award, with the original required delivery date set for June 11, 2027, and a need ship date of February 1, 2027. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R- and I-numbers, which supersede industry standards such as ASTM D3951. Packaging must comply with DLA Packaging Requirements RP001 and MIL-STD-129 for marking and labeling, with hazardous material handled per Fed-Std-313 and TQ requirement IP025 if applicable, otherwise commercially packaged in accordance with ASTM D3951. Palletization must align with RP001, and all packaging must be labeled consistent with the specified Unit of Issue and Quantity per Unit Pack. Inspection and acceptance occur at destination. The delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation protocols are governed by DLAD Proc Notes C19 and C20. The solicitation was issued on August 5, 2026, with a response deadline of August 17, 2026, under the NAICS code 327999, and is managed by the Department of Defense through the DDSP New Cumberland Facility.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325510
New
DIBBS
SPECTRAL SELECTIVE COA
Solicitation # SPE8ES-26-T-2504
The contract calls for the delivery of Spectral Selective Coating in polyurethane form, specifically identified by NSN 8010-01-681-7475, with a total quantity of 16 boxes, each containing eight one-pint units. The coating must be dark gray, matching color chip number 36170, and packaged in accordance with DLA packaging requirements. Each unit package must include a MIL-STD-129 label featuring the lot or batch number. The product is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. Hazardous material provisions require submission of Safety Data Sheets compliant with 29 C.F.R. 1910.1200, as mandated by OSHA’s revised Hazard Communication Standard effective June 1, 2015, along with corresponding labels aligned with either the HCS or the Consumer Product Safety Act and Federal Hazardous Substance Act. Suppliers must also certify that employees have been trained on the new SDS formats, labeling standards, and regulatory requirements. Physical identification of the bare item must comply with RQ017, and all government identification must be removed from non-accepted supplies per RQ011. Delivery is due within 34 days after contract award, with the solicitation issued on August 5, 2026, and responses due by August 11, 2026. The contract is administered by the Department of Defense through the DDSP New Cumberland Facility, with point of contact Stephen Ockenhouse.
Paint and Coating Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details