Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

HEATING ELEMENT, ELE

Active
SPE8E9-26-T-3309Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 12 electrical immersion heating elements, each 26 inches long with a screw plug at the end, identified by NSN 4520-01-062-7355. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. Vendor compliance includes adherence to DLA packaging standards and the mandatory removal of government identification from non-accepted supplies. Traceability documentation may waive the need for source inspection. This is a total small business set-aside under NAICS code 333414, managed by the Department of Defense’s Construction & Equipment MRO Service I. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and delivery is required within 579 days after award. The point of contact is Matthew Kruc, with performance delivery to New Cumberland, PA, 17070-5002.

General Info

12 immersion heating elements, NSN 4520-01-062-7355, small business set-aside, delivery due in 579 days after award.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC IView Agency

NAICS

333414 - Heating Equipment (except Warm Air Furnaces) ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(1)

RFQ SPE8E9-26-T-3309 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
View Agency Profile
Office AddressUS
Contacts
Matthew Kruc
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HEATING ELEMENT,ELE
HEATING ELEMENT, ELECTRICAL, IMMERSION TYPE.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
VENDOR ITEM CONTROL
THE ELEMENT MUST BE 26 INCHES LONG WITH A SCREW PLUG ON THE END.
Source Inspection possibly can be waived if traceability is provided.
DATA IS PROPRIETARY OR INSUFFICIENT FOR COMPETITIVE PROCUREMENT ADEQUATE DATA FOR NSN/Part Number: 4520-01-062-7355 Quantity: 12 EA Purchase Request: 7017758291QTY: 12 Delivery: 579 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333414
New
DIBBS
IMPELLER, FAN, AXIAL
Solicitation # SPE8E7-26-T-3511
The item sought is an axial fan impeller, identified by NSN 4140-01-561-8011, with a quantity of 21 units, required as a component of an Uninterruptible Power Supply within the Vestdavit RIB Davit System on LCS-1 vessels. Though the UPS is manufactured by GE INV, procurement must use Vestdavit’s part number 12271 through their government distributor, Scan Pacific Northwest LLC, with CAGE code 3ESE0. The solicitation, issued under contract number SPE8E7-26-T-3511, is governed by DLA packaging and technical quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. All supplies must comply with the requirement to remove government identification from non-accepted items. Delivery is due in 167 days after award, and the place of performance is New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. The NAICS code 333414 applies, and the contracting office is the DLA New Cumberland Facility under the Department of Defense, with Kelly Mitchell listed as the primary point of contact.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
HEATING BLANKET, ELE
Solicitation # SPE8E8-26-T-5047
The contract is for the procurement of seven electric heating blankets identified by NSN 4520-01-708-1124 and part number T00233-5083-2 from Robertson Manufacturing Inc, with a unit price of $7.00 per unit and a total contract value of $49.00. Delivery is required FOB origin within 167 days from the contract award, with zero tolerance for quantity variance, and all items must be inspected and accepted at the destination. Packaging must comply with ASTM D3951 unless superseded by stricter requirements from the DLA Master List of Technical and Quality Requirements, which take precedence. All packaging and labeling must conform to MIL-STD-129, and palletization must meet DLA Packaging Requirements for Procurement, with the Unit of Issue specified as each and the Quantity per Unit Pack set to 1. The shipment must be delivered to the designated receiving warehouse in Tracy, California, following DLA Transportation Procurement Notes C19 and C20. The original required delivery date is March 28, 2027, with a need ship date of February 1, 2027, under solicitation SPE8E8-26-T-5047, which was posted on August 5, 2026, and closed on August 17, 2026. The contracting agency is the Department of Defense, specifically DLA District San Joaquin, with Alexis Selby listed as the primary point of contact.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
IMPELLER, FAN, CENTRIFUG
Solicitation # SPE8E7-26-T-3494
This contract specifies the procurement of a centrifugal fan impeller identified by part number ES9500-6354, with an approved source code of 0V5R4 under Snowbird Technologies Inc. The item is governed by technical and quality requirements from the DLA Master List, which take precedence over all other standards including ASTM D3951, and must be packaged and labeled in strict compliance with MIL-STD-129 and DLA packaging guidelines as outlined in RP001. The part is tied to a specific drawing revision A dated 10/20/2011 and is associated with the government NSN 4140015924133. The contract requires delivery of ten units FOB origin with zero allowable variance in quantity and inspection and acceptance to occur at the destination warehouse in Tracy, California. Packaging must conform to ASTM D3951 unless overridden by higher-priority DLA requirements, and all units must be palletized per DLA specifications. The delivery timeline mandates fulfillment within 124 days, with an original required delivery date of January 12, 2027, and a need ship date of December 20, 2026. The contract is issued under solicitation SPE8E7-26-T-3494 with a unit price of $10 per unit and a total value of $100. Transportation and shipping logistics are governed by specific DLA procedural notes, and all documentation and labeling must adhere to government protocols including the removal of government identification from non-accepted items. The point of contact for procurement inquiries is Kelly Mitchell of the Department of Defense, DLA District San Joaquin.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
BURNER ASSEMBLY, SPA
Solicitation # SPE8E8-26-T-5036
The contract pertains to the procurement of 23 burner assemblies for spa applications, identified by NSN 4520-01-690-4732 and part numbers associated with Webasto, Volvo, and Arquus. The unit price is $23.00 per unit, with a total contract value of $529.00, and delivery is required within 167 days from the contract award, with an original delivery target of November 22, 2026, and a need ship date of February 1, 2027. Delivery is FOB origin, inspection and acceptance occur at destination, and no quantity variance is permitted. All items must comply with technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 labeling and RP001 DLA packaging standards, with palletization following specified guidelines. Items must be marked with government identification unless rejected, and covered defense information provisions apply. The contract is issued under solicitation SPE8E8-26-T-5036, with the delivery address designated as the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation procedures governed by DLAD Proc Note C19 and C20.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
HEATER, WATER, ELECTRIC
Solicitation # SPE8E8-26-T-5045
The contract is for a single electric water heater identified by NSN 4520-12-317-7848 and part number 0002035996, sourced from manufacturers including NAVANTIA PROPULSION Y ENERGIA and MTU Friedrichshafen GmbH. It is issued under solicitation SPE8E8-26-T-5045 with a required delivery deadline of 167 days from award, and delivery must occur FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the destination, and the item must be packaged per ASTM D3951, with labeling and palletization strictly following MIL-STD-129 and DLA packaging requirements, which supersede any conflicting standards. The item is subject to all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and Covered Defense Information regulations may apply. Delivery is directed to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with an original required delivery date of January 14, 2027, and a need ship date of February 1, 2027. The unit of issue is each, priced at one unit, and transportation logistics align with DLA procedural notes C19 and C20. The solicitation was posted August 5, 2026, with responses due by August 17, 2026, under NAICS code 333414, and the contracting office is the Department of Defense, San Diego, with primary contact Alexis Selby.
SAN DIEGO

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
HEATING ELEMENT, ELECTR
Solicitation # SPE8E8-26-T-4974
The contract specifies the procurement of a nonimmersion electrical heating element manufactured by Chromalox Inc with part number 118-056222-057 and NSN 4520-01-137-2469, for a quantity of six units. All units must be packaged in strict accordance with MIL-STD-2073-1E, including specific packaging methods, materials, and markings compliant with MIL-STD-129, with no special marking required. Terminals must be sealed with silicone resin to prevent moisture ingress during transit or storage, and this compound must dissipate upon initial power application. The supply is strictly prohibited from containing intentional mercury or mercury compounds except under narrowly defined exceptions such as functional use in batteries, fluorescent lights, sensors, or instrument controls approved by NAVSEA, with portable mercury-containing items requiring shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. Delivery is FOB origin with zero tolerance for quantity variance and inspection and acceptance occurring at the destination. The required delivery date is December 12, 2026, with a 167-day delivery window, and the shipment must arrive at the designated warehouse in Tracy, CA. The contract falls under DLA procurement regulations incorporating technical and quality standards from the DLA Master List, and covered defense information provisions apply. Transportation and shipping are governed by specific DLA procedural notes, and the contract is issued under solicitation SPE8E8-26-T-4974 with a unit price of $6.00 per item for a total value of $36.00.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
IMPELLER, FAN, AXIAL
Solicitation # SPE8E7-26-T-3486
The contract pertains to the procurement of an axial fan impeller, identified by NSN 4140-01-562-0499 and part numbers 500K3354 and 500K3345 from HDT Expeditionary Systems Inc and KECO Industries Inc respectively. A total quantity of 12 units is required at a unit price of $12.00, with the total contract value reflecting this amount. Delivery is due within 167 days of contract award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination location, and all items must be packaged in accordance with ASTM D3951 and marked per MIL-STD-129, with palletization strictly following DLA’s packaging requirements. Technical and quality standards referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, which override any conflicting specifications. The item is designated for delivery to the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, though the original delivery requirement was January 5, 2027. Transportation and shipping instructions are governed by specific DLA procedural notes, and all documentation must comply with applicable defense information handling protocols. The solicitation, identified as SPE8E7-26-T-3486, was issued on August 5, 2026, with responses due by August 17, 2026, under a NAICS code of 333414 for industrial machinery manufacturing.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
HEATING ELEMENT, ELE
Solicitation # SPE8E8-26-T-5071
The contract pertains to the procurement of a heating element identified by part number 2194075 from DELFIELD CO and 801-3866 from ALLPOINTS FOODSERVICE PARTS, with the NSN 4520016999873, under solicitation SPE8E8-26-T-5071. A total of 30 units are required at a unit price of $30.00, resulting in a total contract value of $900.00, with delivery due in 167 days from the contract award, FOB origin, and inspection and acceptance occurring at the destination. The solicitation is a total small business set-aside under NAICS code 333414, with a response deadline of August 17, 2026, and is issued by the Department of Defense through the DDSP New Cumberland Facility. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards, including ASTM D3951. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements, with palletization following RP001 specifications. The delivered items must be labeled and marked according to federal guidelines, and the unit of issue is each, with no variance permitted in quantity. All supplies must be shipped to the designated DLA distribution facility in New Cumberland, Pennsylvania, and transportation is governed by DLAD Proc Notes C19 and C20. The original required delivery date was November 14, 2026, with a need ship date of February 1, 2027.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
HEATING ELEMENT, ELE
Solicitation # SPE8E8-26-T-5007
This contract specifies the procurement of a 7.5 kW electrical heating element rated at 480 volts AC, designed for use on the Insinger Machine Co. Model 60-20M-NSU-RH dishwashing machine, with part number 1000-04033 and NSN 4520013100693. The requirement is for 46 units to be delivered within 62 days under contract SPE8E8-26-T-5007, with delivery terms FOB origin and inspection and acceptance points at the destination. All supplies must comply with DLA packaging requirements including MIL-STD-2073-1E and MIL-E-17555, and marking must follow MIL-STD-129 with no special marking codes applied. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds in or on any supplied hardware, with limited exceptions for functional uses in batteries, fluorescent lights, sensors, controls, weapon systems, and approved chemical reagents; any portable devices containing mercury must be shockproof and feature a secondary containment system per NAVSEA 5100-003D. The solicitation is a total small business set-aside under NAICS code 333414, with a response deadline of August 17, 2026, and the specified delivery origin is the DLA Distribution facility in New Cumberland, Pennsylvania.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
FIXTURE, LIGHTING
Solicitation # SPE8E7-26-T-3499
The contract specifies the procurement of a lighting fixture with NSN 6210015953992 and part number 300L-15G, under solicitation SPE8E7-26-T-3499, for a quantity of 28 units at a unit price of $28.00, totaling $784.00. Delivery is required within 167 days from the contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, and all packaging and marking must adhere to DLA’s RP001 requirements and MIL-STD-129 guidelines, with no special marking codes applied. Palletization, parcel post address, and freight shipping destination are all directed to the DDSP New Cumberland Facility in New Cumberland, Pennsylvania. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. The unit of issue is each (EA), and no quantity variance is permitted. The required delivery date is March 15, 2027, with a need ship date of February 1, 2027. The contracting officer is Kelly Mitchell, and the solicitation was issued on August 5, 2026, with responses due by August 17, 2026. The NAICS code is 333414, and the agency is the Department of Defense.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
HEATING ELEMENT, ELECTR
Solicitation # SPE8E8-26-T-4963
This contract specifies the procurement of an electrical immersion heating element with precise technical parameters: a tubular body measuring 16.688 inches overall length and 14.00 inches active length, operating at 440.0 volts AC, 60 hertz, with a maximum power rating of 1200.0 watts and 0.688 inch terminal length. The item is identified by NSN 4520-00-802-8302 and part number F124403ES and is designated as a critical application item. The contract mandates strict adherence to DLA packaging requirements under RP001 and MIL-STD-2073-1E for preparation, with packaging marked according to MIL-STD-129 and no special marking codes applied. The heating element must be furnished without intentional addition of mercury or mercury-containing compounds, except for specific functional uses in batteries, fluorescent lights, sensors, or weapon systems as permitted under NAVSEA 5100-003D, with portable devices containing mercury requiring shockproof construction and a secondary containment boundary. The contract requires delivery of seven units FOB origin within 167 days, with zero variance allowed in quantity, inspection and acceptance occurring at destination. The delivery address is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, and shipping must comply with DLAD Proc Notes C19 and C20. The contract is a total small business set-aside under NAICS code 333414, originally solicited with a response deadline in August 2026 and an awarded need ship date of February 1, 2027.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
HEATER, WATER, ELECTRIC
Solicitation # SPE8E8-26-T-4986
The contract pertains to the procurement of two electric water heaters identified by NSN 4520-01-486-2925 under solicitation SPE8E8-26-T-4986, with a total delivery timeline of 167 days from award. This is a total small business set-aside as defined by FAR 19.5, categorized under NAICS code 333414, and managed by the Department of Defense through the DLA New Cumberland Facility. All supplies must comply with DLA’s Master List of Technical and Quality Requirements referenced by R and I numbers, with the applicable revision controlled by the solicitation issue date due to the simplified acquisition nature. Strict prohibitions are in place against the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific exempted uses such as batteries, fluorescent lights, sensors, weapon systems, and NAVSEA-specified reagents; any portable devices containing mercury must be shockproof and include a secondary containment boundary as per NAVSEA 5100-003D. Additionally, government identification must be removed from non-accepted supplies. The solicitation was posted August 5, 2026, with responses due by August 17, 2026, and the primary point of contact is Alexis Selby of DLA, reachable via phone or email provided.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

NAICS: 332420
New
DIBBS
Small Business Subcontracting Participation
Metal Tank (Heavy Gauge) Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 483110
New
DIBBS
Transportation of Supplies by Sea

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332420
New
DIBBS
Fire Extinguisher Supply (NSN 4210-00-203-0217)
Metal Tank (Heavy Gauge) Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 339113
New
DIBBS
CARRIER ASSEMBLY
Solicitation # SPE8E9-26-Q-0643
The contract awards 202 units of the Carrier Assembly, Protective Mask, identified by NSN 4240-01-224-4196, under solicitation SPE8E9-26-Q-0643, with a firm fixed price and no variance allowed in quantity. Delivery is required within 60 days after contract award, with freight shipped from origin and acceptance occurring at destination. Packaging must comply strictly with MIL-STD-2073-1E and DLA Packaging Requirements, using specified methods for preservation, wrapping, and containment, while avoiding plastic materials whenever possible. Marking must adhere to MIL-STD-129 with no special coding required. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for functional components like batteries or sensors, and any exempted items must meet NavSea 5100-003D standards for shock resistance and secondary containment. The item is destined for DLA Distribution at the New Cumberland facility, with transportation governed by DLAD procedural notes. The supply is critical to a Department of Defense requirement with a material need date of May 19, 2028, and technical and quality standards referenced from the DLA Master List of Requirements in effect on the solicitation issue date.
Surgical Appliance and Supplies Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 314994
New
DIBBS
MARLINE
Solicitation # SPE8E9-26-T-3289
This contract under the MARLINE designation issued by the Navy through DLA mandates the supply of 230 coils of material, each weighing 20 pounds, identified by NSN 4020-00-240-2185 and purchase request 7017757212, meeting Type 4, Class 1 specifications. The material must be packaged in snug-fitting weather-resistant fiberboard boxes compliant with ASTM D5118, and all packaging, marking, and shipping must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware, except in specific functional applications such as batteries, fluorescent lamps, sensors, weapon systems, and chemical reagents as authorized by NAVSEA, with portable mercury-containing devices requiring shock-proof design and secondary containment per NAVSEA 5100-003D. The jute material replaces hemp in packaging, and the minimum breaking strength is reduced to 140 lbs instead of 175 lbs, with ASTM-D681 permissible for tar content determination. Source inspection is required if the vendor has not supplied this item within the past three years, and inspection and acceptance occur at the destination point. Delivery is scheduled to occur within 525 days from the contract award, with delivery terms set at FOB Origin and no variation allowed in quantity. The shipment must be sent to the designated receiving warehouse in Tracy, California, with transportation governed by DLA procedural notes C19 and C20. The contract references the DLA Master List of Technical and Quality Requirements for all R and I-numbered specifications, with the applicable revision determined by the solicitation or award date depending on acquisition size. The material specification T-R-650 Revision A Gen 1 applies, with all packaging and handling instructions aligned to DLA’s procurement standards. The contract was solicited on August 5, 2026, with responses due by August 17, 2026, and performance is managed under NAICS code 314994 by the Department of Defense, with Matthew Kruc as the primary point of contact.
Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
SLOT FILLER MODULE
Solicitation # SPE8E9-26-T-3350
The contract pertains to the procurement of 37 SLOT FILLER MODULES under NSN 7050-01-487-3044, with a delivery requirement of 21 days after award. The solicitation, identified as SPE8E9-26-T-3350, was posted on August 5, 2026, and responses are due by August 17, 2026. The acquisition falls under NAICS code 334511 and is managed by the Department of Defense’s Construction & Equipment MRO Service I office, with performance required at New Cumberland, PA, ZIP 17070-5002. The primary point of contact is Matthew Kruc, reachable via email and phone provided. All supplies must comply with DLA Packaging Requirements and the DLA Master List of Technical and Quality Requirements, which are incorporated by reference and whose applicable revision is determined by the solicitation or award date. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specific functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or authorized chemical reagents, all of which must meet additional containment and safety standards per NAVSEA 5100-003D, including shock-proof design and a secondary containment boundary for portable devices.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
URINAL, STATIONARY
Solicitation # SPE8E9-26-T-3310
The contract is for 78 stationary urinals with part numbers 5672 and U5672, manufactured by Anchor Fabricators Inc. in Clayton, OH, and is identified by NSN 4510-00-691-3979. The items must be color white and comply with all applicable technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, which are incorporated by full text. Packaging must meet DLA packaging specifications, and any non-accepted supplies must have government identification removed before return. The solicitation number is SPE8E9-26-T-3310, issued under a Women-Owned Small Business Set-Aside, with a NAICS code of 332913. The request was made under purchase request 7017757728, and delivery is required within 187 days after order. The place of performance is Tinker Air Force Base, Oklahoma, with a response deadline of August 17, 2026, and the solicitation was posted on August 5, 2026. Primary point of contact is Matthew Kruc of the Department of Defense, Construction & Equipment MRO SVC I.
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
COMPRESSOR UNIT, REF
Solicitation # SPE8E9-26-T-3321
The contract is for the procurement of ten refrigerator compressor units identified by NSN 4130-01-090-9093 under solicitation SPE8E9-26-T-3321, issued as a total small business set-aside under NAICS code 333415. Delivery is required within 167 days of contract award, with a specific ship date of February 1, 2027, and an original required delivery date of October 30, 2027. Items must be shipped FOB origin with no variance allowed in quantity, inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, requiring each unit to be individually encased in a wooden box and secured with plywood planks to prevent movement, with marking per MIL-STD-129 and no special marking codes. The delivery destination is DLA Distribution Puget Sound in Bremerton, Washington. Strict prohibitions apply regarding mercury or mercury-containing compounds, which must not be intentionally added or come into direct contact with any supplied hardware except for specific exemptions such as functional mercury in batteries, fluorescent lights, sensors, weapon systems, or chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and equipped with a secondary containment barrier as mandated by NAVSEA 5100-003D. The contract incorporates all referenced technical and quality requirements from the DLA Master List, with compliance controlled by the revision in effect on the solicitation issue date. Transportation regulations are governed by DLAD Proc Notes C19 and C20, and the unit of issue is specified per DoD standards. The point of contact for inquiries is Matthew Kruc, with additional contract details accessible via the DIBBS system.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
COOLING COIL, AIR, DU
Solicitation # SPE8E9-26-T-3360
The contract specifies the procurement of two cooling coils, air, du, identified by NSN 4130015338172 and part numbers 1262-01-D REV A and 6W8-34-5608T, under solicitation SPE8E9-26-T-3360. The quantity is fixed at two units with no variance allowed, and delivery is required within 167 days of the contract award, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation, packaging, and container specifications, and marking must adhere to MIL-STD-129 with no special marking required. All packaging and handling requirements are governed by DLA’s official packaging standards, and the shipment must be sent to the designated receiving warehouse in Tracy, California. The item is subject to all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, and defense information protections under RD003 may apply. The contract includes transportation guidelines referenced in DLAD Proc Notes C19 and C20, and the original required delivery date is May 18, 2027, with a need ship date of February 1, 2027. The NAICS code is 333415, and the responsible contracting office is under the Department of Defense’s Construction & Equipment MRO Service I, with primary point of contact Matthew Kruc.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
DIBBS
DRAFTING INSTRUMENT
Solicitation # SPE8E9-26-T-3303
This contract governs the procurement of drafting instruments under NSN 6675-00-641-3531, with a quantity of 64 units, pursuant to solicitation SPE8E9-26-T-3303. The technical and quality requirements are dictated by the DLA Master List of Technical and Quality Requirements, referenced by R-numbers such as RP001, RQ006, and RA001, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless a solicitation amendment supersedes it. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware, with narrow exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specified chemical reagents. Portable devices containing mercury must meet shock-proof standards and include a secondary containment boundary as mandated by NAVSEA 5100-003D. The product specification deviates from CID A-A-52034 in specific ways: the center horn must be a transparent plastic disc with defined diameter and tolerance, paired with a centered rubber gasket having prescribed dimensions and protrusion, and revised nomenclature replaces obsolete classifications for protractors and triangles, now correctly identifying them as semicircular protractors and triangles with specified angles and dimensions. The contract item is procured as a fully competitive commercial item under federal specification, with delivery due 167 days after award, and is managed by the Department of Defense’s Construction & Equipment MRO Service I, with performance located in New Cumberland, Pennsylvania.
All Other Miscellaneous Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331491
New
DIBBS
SHEET, METAL
Solicitation # SPE8E9-26-T-3307
This procurement requires aluminum alloy sheet metal with specific dimensions of 0.012 inches thick, 48 inches wide, and 144 inches long, weighing approximately 8.304 pounds per sheet, and must be supplied in whole-foot lengths only. All material must comply with exact specifications and严禁 test coupons; non-conforming sheets will be rejected. A Certificate of Quality Compliance, or Mill-Material Certification, is mandatory for every shipment and must be included with the delivery and submitted separately to the DLA Troop Support Contracting Officer. The material must meet the technical standards referenced in the Technical Data Package, including SAE AMS-QQ-A-250B, ASTM B666/B666M-20, and ASTM B660-23, and must be of Alloy 7075 in T6 temper. Continuous identification markings are required on each unit, including the DLA contract delivery order number, NSN, specification revision, alloy, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be legible, permanent, waterproof, and applied via stamping or stenciling without contaminating the product; adhesive labels are required for small bars, tubes, and shapes under 0.250 inches nominal OD. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award under this solicitation, and any deviation from this requirement must be explicitly stated by the offeror. Suppliers on the QSLD are exempt from source inspection unless otherwise specified, and compliance with the QSL program is strictly enforced—failure to comply may result in criminal penalties. Packaging must adhere to MIL-STD-2073-1E and Level A requirements of ASTM B660, including robust four-corner protection, full edge coverage, and fiberboard or superior top and bottom protection. Marking must follow MIL-STD-129, with special codes ZZ indicating preservation in accordance with ASTM B660 and marking per ASTM B666. The delivery is FOB origin, with inspection and acceptance occurring at destination, and the entire order of 98 sheets must be delivered within 167 days to Warner Robins Air Force Base, Georgia. Failure to meet any requirement, including marking, packaging, or supplier qualification, will result in rejection of the product.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
SOLDERING IRON, ELEC
Solicitation # SPE8E9-26-T-3314
The contract is for the procurement of 46 electric soldering irons with a part number of 3439-00-965-0090, specified as 200 watts with shape B tips, requiring two tips per unit. The item is not classified as hazardous and does not require a Safety Data Sheet, though the hazardous item indicator must remain unchanged. Strict prohibitions apply against the intentional addition of mercury or mercury-containing compounds in or in direct contact with the supplied hardware, with limited exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specific chemical reagents authorized by NAVSEA. Any portable devices containing mercury must be shock-proof and include a secondary containment barrier in compliance with NAVSEA 5100-003D. The contract incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements identified by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging, identification, and marking of non-accepted supplies must comply with DLA standards including removal of government identification and physical marking requirements. The solicitation number is SPE8E9-26-T-3314, issued on August 5, 2026, with responses due by August 17, 2026, under NAICS code 332216 for federal procurement administered by the Department of Defense’s Construction & Equipment MRO Service I. Deliveries are due within 167 days of award, and the place of performance is New Cumberland, PA, with Matthew Kruc listed as the primary point of contact.
Saw Blade and Handtool Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details