Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Heavy-Duty Diesel Concrete Saws Supply

Active

State & Local

Response Deadline08/21/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Iowa DOT is seeking suppliers to provide heavy-duty diesel-powered concrete saws equipped with a 48 HP engine, 36-inch cutting depth, hydrostatic drive, and an integrated water coolant system for use on state highway projects. These machines must meet robust performance standards to handle continuous, high-demand cutting operations in demanding construction environments. The contract is structured as a subcontract and falls under NAICS code 333120, which classifies it within the construction machinery manufacturing sector. Responses are due by August 21, 2026, with the solicitation published on July 31, 2026, providing a three-week window for vendor submissions. All equipment will be delivered and used solely for performance at Iowa DOT highway project sites, though specific delivery locations are not yet defined. The procurement does not specify any set-aside provisions, meaning participation is open to all qualifying vendors regardless of business size or status. Interested parties must access the official bidding portal via the provided link to submit proposals and review detailed technical requirements.

General Info

Iowa DOT seeks heavy-duty diesel concrete saws with 48 HP, hydrostatic drive, 36-inch depth, water coolant for highway projects by August 21, 2026.

Agency

IowaView Agency

NAICS

333120 - Construction Machinery ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 31

subcontract

Response DeadlineAug 21

Submission deadline

Response Deadline

08/21/2026, 06:00:00 PM UTCin 20 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyIowa

ContactsNo contacts available

OfficeN/A

Organization / Agency

Iowa

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of heavy-duty diesel-powered concrete saws with 48 HP engine, 36-inch cutting depth, hydrostatic drive, and water coolant system for Iowa DOT highway projects.

Similar Contracts

Same NAICS industry code

Diesel-Powered Crawler Tractor SupplyThe contract solicits the supply of a new diesel-powered crawler tractor equipped with a hydraulic angle and tilt blade, designed for heavy-duty earthmoving tasks including grading, land clearing, backfilling, and ditch maintenance. The equipment must meet operational standards suitable for demanding environmental and terrain conditions, ensuring reliability and efficiency in public infrastructure and land management applications. This is a subcontract opportunity issued by the Comptroller of Public Accounts under Texas, with a NAICS code of 333120 indicating classification within heavy and civil engineering construction machinery manufacturing. Solicitation is open for responses until August 17, 2026, and the contract was posted on July 31, 2026. The location of performance is unspecified, but the work is expected to support state-level public works initiatives within Texas. The transaction is not subject to a specific set-aside classification, and interested parties must respond through the provided Texas SmartBuy portal to participate. No point of contact is listed, so all inquiries should be directed via the official procurement link.

Comptroller of Public Accounts

POSTED

DEADLINE

Diesel-Powered Crawler Tractor

Solicitation # 304T-27-6014453300

The Statewide Procurement Division of the Comptroller of Public Accounts is soliciting sealed bids for a diesel-powered crawler tractor to be acquired by the Texas Department of Transportation. The solicitation, identified by number 304T-27-6014453300, was posted on July 31, 2026, with a firm deadline for responses on August 17, 2026, at 7:30 PM Central Time. This procurement is classified under a state, local, or education agency transaction and is being conducted solely for the Texas government. The equipment will be delivered and used within the state of Texas, with no specified place of performance beyond the state boundaries. Monica Suarez of the Comptroller’s office serves as the primary point of contact for inquiries, reachable via phone at 512-463-9498 or email at Monica.Suarez@cpa.texas.gov. Additional details and submission guidelines are accessible through the Texas SmartBuy portal linked in the solicitation.

Comptroller of Public Accounts

POSTED

DEADLINE

Case Backhoe Loader Attachments and AccessoriesPhiladelphia Gas Works is seeking subcontractors to supply a range of attachments and accessories designed for use with Case backhoe loaders, including buckets, augers, breakers, couplers, and related workgroup components. The solicitation is open for responses until August 14, 2026, with all submissions required to meet technical and commercial specifications for rugged, reliable equipment compatible with Case machinery. The contract falls under NAICS code 333120, indicating classification within the construction machinery manufacturing sector, and is structured as a subcontract opportunity without a specific set-aside designation. The place of performance and point of contact details are not specified, and interested parties must access the full solicitation through the provided online link to review detailed requirements, evaluation criteria, and compliance obligations.

Philadelphia Gas Works

POSTED

DEADLINE

Invitation for Sealed Bids to secure a term contract to purchase minimum of One-(1) Maximum of Three (3) Hydraulic Excavators.

Solicitation # 3160008200

The Mississippi Department of Wildlife, Fisheries and Parks is soliciting sealed bids to secure a term contract for the purchase of between one and three hydraulic excavators, with the requirement that at least one unit be procured. The solicitation, identified by number 1464-27-R-IFBD-00002, was posted on July 31, 2026, and bids must be submitted by August 18, 2026. This acquisition is intended for use within the state of Mississippi, with performance and delivery expected to occur within the state. The contract is categorized under a State, Local, or Educational (SLED) agency procurement and carries no specific small business set-aside designation. John Lee serves as the primary point of contact for inquiries, reachable via phone at 601-432-2154 or email at JOHNLEE@WFP.MS.GOV. All interested parties must submit their responses in accordance with the sealed bid process outlined in the official solicitation, accessible through the provided online link.

MS DEPT of Wildlife, FISHERIES and PARKS

POSTED

DEADLINE

Devens RFTA Range Control Dirt Sifter Machine Purchase Contract

Solicitation # W15QKN26QA156

The contract pertains to the purchase of a Dirt Sifter Machine for the Devens RFTA Range Control under Solicitation W15QKN-26-Q-A156, updated by Amendment 0001 to extend key deadlines and adjust competition terms. The deadline for submitting quotes has been moved from 10:00 AM on July 31, 2026, to 2:00 PM on August 10, 2026, and the deadline for solicitation questions has been extended from July 29 to August 5, 2026, both in local time. The requirement is no longer set aside exclusively for small businesses and is now open under Full and Open Competition without restrictions. Clause 52.212-2 has been revised as detailed in the amendment, while all other terms from the original solicitation remain in force. The North American Industry Classification System code is 333120, and performance will occur in Devens, Massachusetts, with the contracting office located at Picatinny Arsenal, New Jersey. The primary point of contact is Michael Romano, reachable via email and phone, with Jasmyne Peterson as the secondary contact. The solicitation is managed by the U.S. Department of Defense through the Office of W6QK Acc-Pica.

POSTED

DEADLINE

Utility Compactor

Solicitation # W911S226U3794

The U.S. Department of Defense through the Office of W6QM Micc-Ft Drum is seeking proposals for a Utility Compactor under solicitation number W911S226U3794, which was posted on July 31, 2026, with a response deadline of August 7, 2026, at 5:30 PM Eastern Time. This procurement is a combined solicitation and is designated as a Small Business Set Aside, total, meaning only small businesses as defined by the Small Business Administration are eligible to compete. The North American Industry Classification System code is 333120, identifying the contract's focus on the manufacturing of industrial machinery, specifically utility compactors. The contract is being managed from Fort Drum, New York, 13602-5220, with the primary point of contact being Henry Ingram, reachable at 270-798-2649 or henry.l.ingram4.civ@army.mil. The place of performance is listed with a zip code of 42223, though the city and state are unspecified, suggesting the delivery or execution may occur at a location tied to that postal area. All interested small businesses must respond prior to the deadline to be considered for award.

W6QM Micc-Ft Drum

POSTED

DEADLINE

Solicitation # W911S226U3706

The contract is for the procurement of ten Wacker Neuson BS62-4Ab vibratory rammers, each equipped with an 11-inch plastic shoe and a Honda engine, intended for ground compaction tasks. The solicitation number is W911S226U3706, titled Ground Tamper, and was posted on July 16, 2026, with a response deadline of July 24, 2026, at 3:55 AM Eastern Time. This is a combined solicitation under a Total Small Business Set-Aside as defined by FAR 19.5, meaning only small businesses are eligible to bid. The North American Industry Classification System code is 333120, classifying the contract within the construction machinery manufacturing sector. The issuing agency is the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York, with a performance location listed as 22211. The primary point of contact for inquiries is Anthony Zyla, reachable via email at anthony.j.zyla.civ@army.mil or by phone at 703-614-0476. Bidders must comply with all federal contracting standards and submit proposals through the SAM.gov platform prior to the deadline.

W6QM Micc-Ft Drum

POSTED

DEADLINE

Kubota V5060 Snow Blade

Solicitation # FA446026Q0034

The U.S. Department of Defense, through the 19th Contracting Squadron at Little Rock Air Force Base in Arkansas, is seeking to acquire ten Kubota V5060 Snow Blades or equivalent units to meet operational snow removal needs. This solicitation, identified as FA446026Q0034, is designated as a Small Business Set Aside with total set-aside intent, ensuring eligibility and preference for small businesses under NAICS code 333120, which covers agricultural, construction, and mining machinery manufacturing. The solicitation was posted on July 31, 2026, and responses are due by August 4, 2026, at 7:00 PM Eastern Time, with performance to occur at Little Rock Air Force Base. Detailed technical requirements are outlined in the attached Salient Characteristics document, while standard clauses from Addendum 52.212-1 and 52.212-2, along with supplemental terms, govern the procurement process. Primary point of contact for inquiries is Justin McCoy, reachable at 501-987-1028 or justin.mccoy.3@us.af.mil, with Abigail Turek available as a secondary contact at 501-987-3844 or abigail.turek@us.af.mil. Interested vendors must submit proposals through the SAM.gov platform using the provided link, ensuring full compliance with all specified technical, administrative, and contractual requirements. The contract will be awarded to a qualified small business capable of delivering the required snow blades in accordance with the outlined performance standards and timelines, with delivery expected to support winter operations at the designated military installation.

FA4460 19 Cons Pka

POSTED

DEADLINE

Compact Track Loader SupplyThe contract involves the supply of three compact track loaders for use in municipal public works and utility operations under the Mississippi Department of Finance and Administration. The solicitation, posted on July 30, 2026, requires proposals to be submitted by August 18, 2026, and is classified as a subcontract under NAICS code 333120 for construction machinery manufacturing. The equipment is intended for operational use by municipal entities within the state, with no specific place of performance detailed beyond the agency’s jurisdiction in Mississippi. The contract does not specify a set-aside type or designated small business preferences, and while the agency name and office details are limited, the official bidding information can be accessed through the state’s official contract portal.

POSTED

DEADLINE

Supply of Mini ExcavatorThe City of Southaven, Mississippi, through the Mississippi Department of Finance and Administration, is seeking to procure one new Mini Excavator via a reverse auction conducted on centralbidding.com. Interested vendors must submit their bids electronically by the deadline of August 18, 2026, and participate in the competitive bidding process to secure the contract. The solicitation falls under NAICS code 333120, which classifies the procurement within the construction machinery manufacturing sector. The contract is categorized as a subcontract, and while no set-aside provisions are specified, bidders are expected to meet all requirements for delivery and compliance with municipal procurement standards. The equipment is intended for public works use, and the successful vendor will be responsible for ensuring timely delivery and functionality of the machine to the designated location in Southaven.

POSTED

DEADLINE

PARTS KIT, TRACK END

Solicitation # SPE7L3-26-T-138Q

The contract pertains to a parts kit for track end and track shoe assembly, identified by NSN part number 2530-01-295-3113, with a total quantity of 5,231 kits requested under purchase request 7017520100, totaling 11,871 units. Delivery is scheduled within 154 days after order placement. This item contains technical data subject to U.S. export control regulations under either ITAR or EAR, meaning any transfer, including disclosures to foreign persons within the United States, requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and distribution is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on proper handling of defense export-controlled technical data, and have been formally approved by DLA to access such information. The solicitation number is SPE7L3-26-T-138Q, posted on July 30, 2026, with responses due by August 10, 2026. The contracting agency is the Department of Defense under Land Supplier Operations Vehicle Support, with performance located in Tracy, California, and primary point of contact being Matthew Curry.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Pontoon-Mounted Dredge System IntegrationThe contract calls for the supply and full integration of a complete pontoon-mounted dredge system designed for sediment removal at Anchor Dam, encompassing all essential components such as pumps, pontoons, hoses, and necessary spare parts to ensure continuous operation. The system must be engineered for reliable performance in the specific environmental and hydraulic conditions of the dam site, with integration requirements ensuring seamless functionality between all supplied elements. Delivery, installation, and commissioning of the dredge system are included under the scope, with an emphasis on compliance with operational standards for sediment control and environmental safeguarding. This subcontract, classified under NAICS code 333120, is issued by the Great Plains Regional Office of the Department of the Interior, with responses due by August 10, 2026. The work will be performed at Anchor Dam, though specific location details are not provided in the available data. The contract does not specify a set-aside type, indicating it is open to all qualified offerors. No point of contact is listed, and interested parties must refer to the provided UI link for additional submission details and requirements.

Great Plains Regional Office

POSTED

DEADLINE

More opportunities from Iowa

Same awarding agency

Specialty Vehicle Delivery and Logistics to Remote SiteThe contract entails the final-mile delivery of a specialty utility terrain vehicle to the Sugema Wildlife Unit, with full responsibility for freight handling, transportation insurance, and guaranteed on-time arrival no later than September 30, 2026. The scope requires end-to-end logistics coordination to ensure the vehicle reaches a remote location without damage or delay, adhering to strict compliance standards for safe transport in challenging environments. All risks during transit, including potential damage, loss, or scheduling failure, are borne by the contractor, who must demonstrate proven capability in handling high-value, sensitive equipment to isolated areas. This is a subcontract under NAICS code 484220, reflecting its classification as a specialized truck transportation service. The solicitation was posted on July 31, 2026, with bids due by August 21, 2026, and is managed by the State of Iowa through its agency portal. While specific performance locations and contact details are not enumerated, the place of performance is identified as a remote wildlife site requiring precise logistical planning. The contractor must meet all operational requirements without reliance on external support and will be held accountable for full delivery compliance as stipulated in the agreement.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 23 hours ago

DEADLINE

Aftermarket Suspension Upgrade Supply (Alternative Compliance Option)The contract seeks the supply of heavy-duty suspension components, such as S3 Powersports HD Springs or functionally equivalent alternatives, intended for integration into off-road utility task vehicles to meet regulatory compliance standards. Bidders must provide comprehensive technical documentation demonstrating the performance, durability, and safety attributes of their components, with a specific requirement to secure approval from the Department of Natural Resources to establish equivalency to approved systems. The procurement is structured as a subcontract tied to a broader compliance initiative, and the North American Industry Classification System code 336340 indicates the focus on motor vehicle parts manufacturing. All proposals must be submitted by the deadline of August 21, 2026, and interested parties should access the official solicitation portal for detailed submission guidelines and additional requirements.

Motor Vehicle Brake System Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Heavy-Duty Utility Task Vehicle (UTV) with Upgraded SuspensionThe contract requires the supply and delivery of one new 2026 Can-Am Defender 6x6 Limited or an equivalent utility task vehicle (UTV) equipped with heavy-duty suspension, an enclosed cab, full HVAC capability, a winch, and a reinforced front bumper. The vendor must be an authorized representative of the original equipment manufacturer and is expected to deliver a vehicle meeting or exceeding the specified rugged specifications suited for demanding operational environments. The vehicle must be brand new, with all included components fully functional and factory-installed to ensure reliability and performance under strenuous conditions. This is a subcontract solicitation posted on July 31, 2026, with a response deadline of August 21, 2026, and falls under NAICS code 336120 for motor vehicle manufacturing. The contracting agency is the State of Iowa, with no additional details provided on the office location or point of contact. All bids must be submitted through the designated online portal linked in the solicitation, and the place of performance has not been specified, implying delivery may be required to any designated location within the state or as further determined by the agency. The requirement emphasizes compliance with OEM standards and the provision of a high-performance UTV capable of supporting heavy-duty utility operations.

Heavy Duty Truck Manufacturing

POSTED

about 23 hours ago

DEADLINE

27CRDWBCLULL-0010G - CanAm Defender (Syfert)

Solicitation # 27CRDWBCLULL-0010G

The Iowa Department of Natural Resources is soliciting bids for the purchase of a new 2026 Can-Am Defender 6x6 Limited equipped with upgraded heavy duty springs or a state-approved equivalent, intended for use in state operations. While the Can-Am Defender is cited as a reference model, vendors are encouraged to propose comparable vehicles that meet or exceed the stated functional requirements, provided they submit full technical specifications and clearly note any deviations from the reference specifications for evaluation. Only authorized manufacturer representatives eligible to honor the full manufacturer’s warranty may respond to this solicitation. All proposals must be submitted through the designated online portal, where respondents are required to save progress frequently, especially after uploading documents, and must recertify and resubmit their bid each time they reopen it after initial submission, even if no changes were made. Any amendments issued by the issuing officer must be reviewed and acknowledged by respondents, who are then required to certify and resubmit their proposal to remain eligible, although previously entered information will be retained. The solicitation opens on July 31, 2026, with a firm deadline for responses on August 21, 2026, at 7:00 PM, and all submissions must follow the guidelines posted on the Iowa DNR’s official RFP and bid letting website. Point of contact for inquiries is Colton Lullmann, reachable via email.

Motorcycle, ATV, and All Other Motor Vehicle Dealers

POSTED

about 23 hours ago

DEADLINE

Substitution and Compliance Support (Engineering/Testing)The contract involves providing engineering and testing support to a prime bidder for the preparation of a Pre-Bid Request for Substitutions, with a focus on delivering detailed performance data, technical specifications, and justifications for equipment that is not listed in the original specifications. This effort requires thorough technical analysis to demonstrate equivalency of non-listed items, ensuring compliance with project requirements and procurement standards. The work is time-sensitive, with a response deadline set for August 24, 2026, and was posted on July 31, 2026, indicating a compressed timeline for research, documentation, and submission. The contract is categorized as a subcontract under NAICS code 541330, which corresponds to engineering services, and is associated with the Iowa state agency. While specific details about the place of performance or point of contact are not provided, the work is expected to be conducted remotely or in coordination with the prime bidder’s team. Interested parties must access the opportunity via the designated UI link to obtain full solicitation details and submit proposals before the deadline. The nature of the task demands expertise in technical documentation, regulatory compliance, and the ability to defend equipment substitutions with credible, verifiable data.

Engineering Services

POSTED

DEADLINE

Technical Documentation and Manual ProductionThe contract requires the production and delivery of three comprehensive manuals—operator, service, and parts—for a guardrail mower, each presented in a clear, well-labeled format that may be delivered electronically or in printed form. These manuals must be technically accurate and user-friendly, ensuring proper use, maintenance, and component identification for end users. The work is part of a subcontract under the NAICS code 541611, targeting technical documentation services, and is issued by the state of Iowa with a response deadline of August 24, 2026, following a posting on July 31, 2026. All deliverables must meet specified quality standards without guidance on format preference, allowing flexibility between digital and physical outputs as long as clarity and labeling requirements are fully satisfied.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Operator Training ServicesThe contract requires the provision of comprehensive hands-on operator training for Iowa DOT crews on the safe and effective use of a new guardrail mower. Training must cover all essential operational aspects including system controls, routine maintenance protocols, and emergency response procedures to ensure crew safety and equipment longevity. The training is designed to be practical and field-oriented, directly addressing the needs of personnel who will be operating the machinery in real-world conditions across Iowa’s roadways. Subcontractors responding to this solicitation must be prepared to deliver training that aligns with industry best practices and state safety standards, with all instruction taking place in the field where the equipment will be used. The opportunity was posted on July 31, 2026, and responses are due by August 24, 2026, under NAICS code 611519 for other schools and instruction. There is no formal set-aside designation, and the work is to be performed statewide with no specified location restrictions beyond the scope of Iowa DOT operations.

Other Technical and Trade Schools

POSTED

DEADLINE

On-Site Installation Support and Technician ServicesA qualified field technician will be required to provide on-site support for the mechanical and hydraulic installation of a guardrail mower at the Iowa DOT’s Central Repair Shop in Ames, Iowa. The contract calls for hands-on technical expertise to ensure proper assembly, integration, and functional verification of the equipment in a controlled facility environment, with the technician expected to work directly at the shop location during the installation process. The work falls under NAICS code 811490, indicating it involves other miscellaneous repair and maintenance services, and is structured as a subcontract opportunity with a response deadline of August 24, 2026, following a posting date of July 31, 2026. All activities must be performed in compliance with Iowa DOT standards and protocols, though specific terms such as contract duration, payment structure, or performance metrics are not detailed here.

Other Personal and Household Goods Repair and Maintenance

POSTED

DEADLINE

Guardrail Mower Supply and ManufacturingThe contract calls for the supply and manufacturing of a specialized 3-point mounted guardrail mower designed for efficient and safe operation along roadways and rights-of-way. The equipment features dual independently driven cutting heads to ensure precise trimming on both sides of guardrails, with a 60-inch straddle clearance that allows the mower to navigate between railings without requiring excessive repositioning. Automatic post maneuvering enables the machine to detect and adjust around vertical support posts, minimizing operator intervention and enhancing productivity. Hydraulic tilt functionality provides the ability to adjust the cutting angle to match uneven terrain or varying rail profiles, while PTO-driven operation at 1000 RPM ensures compatibility with standard agricultural and utility tractor power take-off systems. The design prioritizes durability, precision, and operational reliability in demanding roadside maintenance environments. This is a subcontract under the NAICS code 333111 for agricultural, construction, and mining machinery manufacturing, solicited by the State of Iowa with a response deadline of August 24, 2026. The posting date indicates the opportunity was made available on July 31, 2026, and the place of performance remains unspecified, suggesting the equipment may be delivered to various state-maintained locations statewide. Interested parties should submit proposals through the provided online portal before the deadline, and all technical specifications must be met to ensure compliance with Iowa’s operational and safety standards for roadside vegetation management equipment.

Farm Machinery and Equipment Manufacturing

POSTED

DEADLINE

Alternate Brand Substitution Engineering & CertificationThe contract requires engineering evaluation and certification of alternative brand concrete saws to verify compliance with Iowa DOT specifications through the formal substitution process. This work involves technical analysis of non-standard equipment to ensure performance, safety, and regulatory alignment with state transportation infrastructure requirements, with the goal of approving substitutes for approved primary brands. All submissions must be thoroughly documented and validated to meet the rigorous standards expected by the Iowa Department of Transportation. The solicitation is open as a subcontract with a response deadline of August 21, 2026, and is classified under NAICS code 541330, indicating professional, scientific, and technical services related to engineering. The contracting entity is the State of Iowa, and all work is expected to support state infrastructure operations. Interested parties must submit evaluations and certifications by the specified deadline to be considered, and performance will be reviewed against established technical criteria to determine eligibility for substitution approval.

Engineering Services

POSTED

DEADLINE

Warranty and Field Service SupportThe contract seeks a contractor to provide warranty-backed repair, maintenance, and field service support for concrete saws used across Iowa DOT operations. This subcontract requires the vendor to deliver timely and reliable technical services to ensure the continued operational readiness of equipment, with all work backed by a warranty to guarantee quality and performance. Services must be performed across the state of Iowa, covering all necessary field locations where concrete saws are deployed for infrastructure projects. The contractor is expected to respond to service requests promptly, perform diagnostics and repairs, replace defective parts under warranty, and maintain detailed service records to meet Iowa DOT’s operational and compliance standards. The solicitation was posted on July 31, 2026, with responses due by August 21, 2026, and falls under NAICS code 811310 for commercial and industrial machinery and equipment repair and maintenance. The contract is structured as a subcontract, and while no set-aside provisions are specified, bidders must be prepared to meet all technical and logistical demands of supporting state-mandated infrastructure maintenance activities. The point of contact and exact performance locations are not listed, but services will be required statewide, and all work must align with Iowa DOT’s operational protocols. Interested parties can access additional details through the provided UI link on the Sciquest platform.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Technical Documentation and Manual DevelopmentThe contract involves the development of comprehensive operation, maintenance, and safety manuals for delivered concrete saws, fully aligned with the technical specifications and warranty standards set by the Iowa Department of Transportation. The work must meet all required regulatory and performance benchmarks to ensure end-users receive clear, accurate, and compliant documentation that supports safe and efficient equipment use. The project is structured as a subcontract under NAICS code 541830, which pertains to technical writing services, and is open for proposals with a deadline of August 21, 2026. The contract is administered by the Iowa agency, with performance expected to meet state-specific operational and safety protocols. All deliverables must be thoroughly reviewed for accuracy, usability, and adherence to Iowa DOT mandates without reliance on external citations or proprietary references.

Media Buying Agencies

POSTED

DEADLINE