Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Heavy Equipment Rigging and Transportation

Active

Federal

Response Deadline11/05/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Heavy Equipment Rigging and Transportation supports prime contractors on USACE Endist Chicago projects under the Department of Defense. The scope of work involves the physical removal and precision placement of transformers weighing approximately 13.8 tons each. Responsibilities include rigging and lifting existing units, transporting them from delivery points to designated concrete pads, and ensuring the safe installation of new units. To execute these tasks, the contractor must provide heavy-duty cranes and certified rigging and hoisting operators. The project is categorized under NAICS code 488410 and is performed in the 60441 zip code area. The response deadline for this opportunity is November 5, 2026.

General Info

Subcontract for rigging and transporting 13.8-ton transformers for USACE projects by November 2026.

Agency

Department Of Defense → W072 Endist Chicago

NAICS

488410 - Motor Vehicle Towing

Place of Performance

IL, 60441

Set-Aside

NONE

Documents

This scope was carved out of W912P627SSA001.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CSSC Utility Feed Transformer Replacement

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 26

subcontract

Response DeadlineNov 5

Submission deadline

Response Deadline

11/05/2026, 07:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W072 Endist Chicago

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → W072 Endist Chicago

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs physical removal and placement of transformers for prime contractors on USACE Endist Chicago projects. Rigs and lifts existing units (approx. 13.8 Tons each), transports units from delivery point to concrete pads, and performs precision placement of new units. Requires certified rigging and hoisting operators and heavy-duty cranes. Delivers safe transport and placement of units.

Similar Contracts

Same NAICS industry code

Industrial Equipment Rigging and OffloadingThis subcontract involves the offloading, transport, and positioning of heavy industrial furnace components for prime contractors at Holloman Air Force Base. The scope of work requires the use of heavy-duty cranes and industrial dollies to move equipment from delivery vehicles into Building 1185 and into final positions for anchoring. All operations must be performed in strict compliance with OSHA 29 CFR 1910 safety standards to ensure equipment is delivered safely and ready for installation. Managed by the Department of Defense under the FA9101 Aedc Pkp Procurement Branch, the project falls under NAICS code 488410. The response deadline for this opportunity is November 2, 2026, with performance taking place at the designated facility in zip code 37389.

FA9101 Aedc Pkp Procrmnt Branch

POSTED

about 8 hours ago

DEADLINE

MIL-SPEC Packaging and Shipping ServicesThis subcontract for MIL-SPEC Packaging and Shipping Services supports the DLA Weapons Support Maritime Supply Chain by providing military-grade packaging, marking, and palletization for prime contractors. The scope of work focuses on the handling of sensitive electronic components and PCBs, requiring strict adherence to MIL-STD-2073-1E and RP001 standards, including the use of moisture barriers and ESD shielding. All shipments must be marked according to MIL-STD-129 for final delivery to the DLA Distribution DDSP New Cumberland Facility. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 488410. Interested parties must submit their responses by November 5, 2026, for performance located in New Cumberland, Pennsylvania. This project is managed under the Department of Defense for the DLA Weapons Support Maritime Supply Chain.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Military Grade Packaging and Marking ServicesThis subcontract for Military Grade Packaging and Marking Services involves the processing of finished components for prime contractors supporting DLA and US Navy projects. The scope of work requires the packaging of 575 units for delivery to DLA Distribution Cherry Point, adhering strictly to MIL-STD-2073-1E and MIL-STD-129 standards. Key technical requirements include the application of specific lot and serial numbers, CAGE codes, and the use of designated preservation materials and cushioning. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div and is designated as a Total Small Business Set-Aside. Interested parties must possess specialized knowledge of DLA Packaging Requirements RP001. The performance of these services will take place in Cherry Point, North Carolina, with a response deadline set for November 2, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

MIL-SPEC Packaging and Sealing for Rubber ComponentsThis subcontract involves providing specialized packaging and sealing services for rubber components supporting the DLA Weapons Support Land Supply Chain. The contractor is responsible for sealing components in medium duty, waterproof, greaseproof, and opaque bags in strict accordance with MIL-DTL-117, Type II, Class C, Style 1. To ensure protection against physical damage and UV deterioration, all packages must be marked according to MIL-STD-2073-1E and MIL-STD-129 standards. The project is managed under NAICS code 488410 for the Department of Defense. The scope of work concludes with the delivery of finished, sealed, and marked packages to the prime contractor. Interested parties should note the response deadline of November 5, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

MIL-SPEC Packaging and Preservation ServicesThis subcontract for the Defense Logistics Agency involves providing military-grade packaging, marking, and preservation services for valves intended for delivery to the USS Gunston Hall LSD 44. The scope of work requires strict adherence to military standards, specifically applying Level A preservation per MIL-V-3, packaging according to MIL-STD-2073-1E, and marking shipments in accordance with MIL-STD-129. To ensure equipment integrity, the contractor must utilize MIL-SPEC crates, desiccants, and vapor barriers. The opportunity is categorized under NAICS code 488410 and was posted on October 25, 2026, with a response deadline of November 5, 2026. Performance of these services will take place at FPO 09573. This contract is designed to support prime contractors in meeting the rigorous supply requirements of the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

MIL-SPEC Packaging and Delivery ServicesThis subcontract for MIL-SPEC Packaging and Delivery Services involves providing specialized military-grade packaging, marking, and shipping for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The scope of work requires strict adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for markings, and RP001 for palletization. The final objective is the delivery of fully processed shipments to the USS Warrior MCM 10 via FOB Destination. The project falls under NAICS code 488410 and is managed by the Department of Defense. Performance will take place at FPO 96683. Interested parties should note the response deadline of November 5, 2026, following the posting date of October 25, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Military Kitting and Packaging ServiceThis subcontract for the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div, involves providing military kitting and packaging services. The contractor is responsible for the final assembly of components into 14 completed kits, ensuring each includes a detailed contents list. All packaging must adhere to strict military standards, specifically MIL-STD-2073-1E Appendix D for cushioning and boxing, and MIL-STD-129 for marking and barcoding. The work will be performed at Hill AFB, and the contractor must maintain full ITAR and EAR compliance when handling all associated technical data. This project is categorized under NAICS code 488410 and requires the delivery of fully barcoded kits to support prime contractors on DLA Weapons Support ASC projects.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

MIL-SPEC Aerospace Packaging and Shipping ServicesThis subcontract for MIL-SPEC Aerospace Packaging and Shipping Services involves providing specialized packaging and shipping support for prime contractors working on DLA aircraft component projects. The selected provider must seal items in medium duty, waterproof, greaseproof, and opaque bags in strict accordance with MIL-DTL-117, Type II, Class C, Style 1. Additionally, all shipments must be marked and labeled per MIL-STD-129 for final delivery to the DLA Distribution Depot located at Tinker AFB, Oklahoma. The contractor is required to possess specific knowledge of DLA Procurement Notes C19 and C20 to ensure all deliverables are fully packaged and marked according to government standards. This opportunity is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, falling under NAICS code 488410. Responses are due by November 2, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

DLA Compliant Packaging and PalletizationThis subcontract involves providing specialized packaging and palletization services for structural aluminum panels supporting DLA and US Air Force aerospace projects. The contractor is responsible for ensuring all materials are handled in strict accordance with RP001 DLA Packaging Requirements for Procurement, utilizing approved materials to guarantee secure transport to Tinker AFB and successful government acceptance. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Div, with performance taking place in New Cumberland, Pennsylvania. The opportunity is categorized under NAICS code 488410, with a response deadline set for November 2, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract opportunity is for the provision of specialized packaging and marking services to support prime contractors on Department of Defense projects. The scope of work involves preparing shaft seal assemblies for shipment in strict compliance with MIL-STD-2073-1E, MIL-STD-129, and RP001 requirements. The selected provider will utilize MIL-SPEC crates, moisture barriers, and cushioning materials to ensure the finished products are properly packaged and labeled for destination inspection. Managed by the DLA Weapons Support Maritime Supply Chain, this project is designated as a Total Small Business Set-Aside under NAICS code 488410. The place of performance is located in Tracy, California. Interested parties must submit their responses by the deadline of November 5, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract for Military-Grade Packaging and Marking Services supports prime contractors on Defense Logistics Agency supply contracts. The scope of work involves performing specialized packaging, marking, and labeling of items to ensure compliance with ASTM D3951 and RP001 DLA Packaging Requirements. Additionally, the contractor must utilize compliant equipment to mark and label all packaging according to MIL-STD-129 standards and deliver shipping blocks prepared for DLA destination delivery. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Tinker AFB. The opportunity is categorized under NAICS code 488410, with a response deadline set for November 2, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Military Kit Packaging and Marking ServicesThis subcontract for Military Kit Packaging and Marking Services involves providing specialized military-grade packaging, marking, and labeling for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The scope of work requires the delivery of two fully compliant, palletized kits processed in accordance with MIL-STD-2073-1 Appendix D for packaging, MIL-STD-129 for marking, and RP001 for palletization. Additionally, the contractor must ensure strict adherence to IP056 by prohibiting the use of mercury compounds. The project is managed under the Department of Defense for the DLA Weapons Support Maritime Supply Chain, with performance taking place in New Cumberland. Interested parties must respond by November 5, 2026, regarding this opportunity which falls under NAICS code 488410.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → W072 Endist Chicago

Same awarding agency

Environmental Disposal ServicesThis subcontract for Environmental Disposal Services supports prime contractors on USACE Endist Chicago projects under the Department of Defense. The scope of work involves the lawful removal and disposal of old transformers and insulating fluids, utilizing vacuum trucks for the drainage and collection of materials. All hazardous and industrial waste must be transported to approved facilities in accordance with strict safety and environmental regulations. To qualify, service providers must hold EPA-approved waste hauler and disposal certifications. The contractor is responsible for providing all necessary documentation upon completion, including disposal manifests and certificates of destruction or disposal. This opportunity falls under NAICS code 562910 and is centered in the 60441 zip code area.

Remediation Services

POSTED

about 8 hours ago

DEADLINE

NETA Certified Testing AgencyThis subcontract opportunity with the Department of Defense, specifically for W072 Endist Chicago, requires a NETA Certified Testing Agency to perform pre-energization electrical acceptance testing for prime contractors. The selected agency will be responsible for conducting comprehensive safety and operational tests using specialized equipment, including high-voltage testers, insulation resistance testers, and TTR meters. All work must be performed in strict accordance with NETA ATS and IEEE C57 standards to ensure full compliance and operational safety. The contractor is expected to deliver certified electrical acceptance test reports and provide final commissioning sign-off. This project falls under NAICS code 541380 and is located in the 60441 zip code area. Interested parties must submit their responses by the deadline of November 5, 2026.

Testing Laboratories and Services

POSTED

about 8 hours ago

DEADLINE

Medium-Voltage Electrical ContractorThis subcontract opportunity for a Medium-Voltage Electrical Contractor involves providing electrical isolation, installation, and commissioning services for prime contractors on USACE Endist Chicago projects. The scope of work includes executing lockout-tagout procedures, disconnecting existing transformers, and installing new units into existing cabling and switchgear, ensuring all systems are properly grounded and bonded to deliver a fully energized transformer system. The project falls under NAICS code 238210 and requires strict adherence to USACE EM 385-1-1 and NFPA 70E safety standards. Performance will take place in the 60441 zip code area for the Department of Defense. Interested parties must submit their responses by November 5, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 8 hours ago

DEADLINE

Utility Feed Transformer Manufacturer/SupplierThis subcontract involves the manufacture and delivery of two new operational replacement transformers for prime contractors working on USACE Endist Chicago projects. The required units must be three-phase, 60 Hz, Delta-Wye transformers with a capacity of 4,000/5,000 kVA, featuring a 13,200V primary and 480Y/277V secondary voltage. Strict environmental and technical specifications apply, including the use of biobased dielectric insulating fluid containing at least 95 percent biobased content and EPA CPG recovered materials for the enclosures. Additionally, the supplier must provide PCB Certification ensuring levels are below 1 PPM. The project falls under NAICS code 335311 and is associated with the Department of Defense.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 8 hours ago

DEADLINE

CSSC Utility Feed Transformer Replacement

Solicitation # W912P627SSA001

The U.S. Army Corps of Engineers Chicago District is conducting market research via Sources Sought Notice W912P627SSA001 to identify qualified contractors for the CSSC Utility Feed Transformer Replacement project. Located at the Chicago Sanitary and Ship Canal Fish Dispersal Barrier facility in Lockport, Illinois, the project requires the turnkey removal and disposal of two existing utility feed transformers and the installation, testing, and commissioning of two new operational replacements. The new units must have a capacity of 4,000/5,000 kVA, a primary voltage of 13,200 volts, and a secondary voltage of 480Y/277 volts in a three-phase, 60 Hz, Delta-Wye configuration. The contractor will be responsible for all labor, materials, rigging, and supervision, while reusing existing concrete pads, cabling, and switchgear. The anticipated period of performance is 365 calendar days from the Notice to Proceed. This is not a formal request for proposals or quotes, but a capability assessment to determine the availability of small businesses under NAICS code 237130. Key requirements for interested firms include a proven track record with medium-voltage electrical systems, compliance with USACE EM 385-1-1 and NFPA 70E safety standards, and the ability to meet strict procurement lead times. Responses must be submitted by November 5, 2026, and include a technical capability statement, project examples, and documentation of bonding limits. Firms must also specify their ability to satisfy limitations on subcontracting per FAR 52.219-14.

Power and Communication Line and Related Structures Construction

POSTED

about 8 hours ago

DEADLINE

High Voltage Power Supplies (HVPS) for Electronic Fish Barriers

Solicitation # W912P627MR569570

The U.S. Army Corps of Engineers, Chicago District, is conducting market research to identify capable providers for six high voltage power supplies to support the Electric Dispersal Barrier System near Romeoville, Illinois. The requirement includes four 1.5 megawatt units and two 350 kilowatt units designed to protect the Great Lakes from invasive species. The selected contractor will be responsible for engineering, site verification, design, fabrication, factory acceptance testing, training, and delivery. This effort is being restructured to eliminate previous storage requirements to encourage more competitive bidding. The government is seeking a firm-fixed-price contract with an estimated one-year period of performance for manufacture and delivery. Potential respondents must demonstrate technical expertise in copper-wound transformers, harmonic reduction, and integration with existing pulse generating units. Interested parties must submit a capabilities statement by November 4, 2026, detailing their organizational size, relevant project experience, and ability to meet specific technical and safety standards. Based on the responses, the procurement may be set aside for small businesses or opened for full competition.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Section 219 Chesterton Interceptor Rehab

Solicitation # W912P627RA003

The United States Army Corps of Engineers Chicago District is issuing a pre-solicitation notice for the Section 219 Chesterton Interceptor Rehab project in Chesterton, Indiana. The project involves relining approximately 3,217 linear feet of a 48-inch trunk sewer with a 42-inch slipliner pipe, consisting of 2,368 linear feet of base work and 849 linear feet of option work. Required services include sewer cleaning, televising, sliplining, annulus grouting, lateral reinstatement, and the use of specialized insertion pits, all while maintaining traffic and erosion control. All personnel must be certified in accordance with EM 385-1-1 safety standards. This acquisition is reserved exclusively for small business concerns under NAICS code 237990, with an estimated construction cost between 1 million and 5 million dollars. The solicitation package is expected to be advertised in November 2026 and will be available exclusively through the Procurement Integrated Enterprise Environment system. Interested contractors must be registered in the System for Award Management at the time of proposal submission to be eligible for award.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

PRESOLICITATION NOTICE FOR GATE HOIST MACHINERY PAINTING AND HOIST HOUSE REHABILITATION FOR FOX RIVER DAMS, WISCONSIN

Solicitation # W912P626BA026

The U.S. Army Corps of Engineers Chicago District is preparing to solicit a contract for the repainting of gate hoisting machinery and the rehabilitation of hoist houses across nine dams on the Fox River in Wisconsin, including Kaukauna, Little Chute, Cedars, Appleton Lower, Menasha, Appleton Upper, DePere, Little Kaukauna, and Rapid Croche Dams. The scope of work includes surface preparation and painting of all gate hoisting equipment as well as comprehensive structural upgrades to each hoist house such as replacing shingle roofing with metallic sheet roofing, installing heavy duty commercial doors with modified framing, swapping exterior vinyl siding for galvalume, renewing soffit and fascia, and adding insulation to ceiling and wall cavities. All work must comply with USACE EM 385-1-1 safety and construction standards, and the contract will be executed under a single-year performance period beginning after award. This acquisition is strictly reserved for small business concerns as defined by the North American Industry Classification System code 236220, with a size standard of $45 million in annual receipts. Interested vendors must be actively registered in the System for Award Management (SAM) at the time of proposal submission and must also register in the DoD’s Procurement Integrated Enterprise Environment (PIEE) system to access the official solicitation, which will be released in the fourth quarter of fiscal year 2026. Proposals submitted via telephone, fax, or email will not be accepted. All correspondence must reference the solicitation number W912P626BA026, and inquiries should be directed to the primary point of contact, Ericka Hillard. Contractors are encouraged to review the USACE Contract Changes Playbook for guidance on equitable adjustments and change order processes under the contract.

Commercial and Institutional Building Construction

POSTED

DEADLINE

Construction Materials Supply (Soil, Mulch, Erosion Control)This contract involves the supply of essential construction materials including clean fill, mulch, erosion control blankets, and other items necessary for earthwork and vegetation installation projects. It is a subcontract managed by the Department of Defense, specifically under the W072 Endist Chicago office. The contract falls under the NAICS code 423310, which covers construction materials supply. The contract was posted on April 22, 2026, and aims to provide materials that support soil stabilization, landscaping, and erosion prevention activities. While specific details such as location, set-aside status, and point of contact are not provided, the scope emphasizes delivering reliable construction supplies critical for effective earthwork and environmental management efforts.

Lumber, Plywood, Millwork, and Wood Panel Merchant Wholesalers

POSTED

DEADLINE

Surveying and Site MappingThe contract involves conducting detailed topographic and boundary surveys specifically aimed at supporting construction activities in wetland areas. The surveys will provide essential data for construction layout, grading, and tracking project progress, ensuring accurate and efficient site development. The scope includes both the measurement of natural and man-made features to guide various phases of the construction process. This subcontract, titled "Surveying and Site Mapping," was posted on April 22, 2026, under the NAICS code 541370, indicating specialized surveying and mapping services. It is managed by the Department of Defense through an entity referred to as W072 Endist Chicago. While specific location details and points of contact were not provided, the contract supports project execution in previously undefined wetland areas, emphasizing the critical role of precise environmental and boundary data in complex site conditions.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

Hydraulic and Hydrologic Modeling SupportThis contract involves providing hydraulic and hydrologic modeling support specifically using HEC-RAS software to assist in the design process and to validate the restoration of hydrologic functions within an aquatic ecosystem. The work is aimed at ensuring that the restored ecosystem functions effectively and meets the intended environmental and engineering requirements. The contract is a subcontract under the Department of Defense's W072 Endist Chicago office, associated with NAICS code 541330, which pertains to engineering services. Although certain details such as solicitation number, place of performance, and point of contact are not specified, the primary focus is clearly on specialized technical modeling to support ecosystem restoration projects.

Engineering Services

POSTED

DEADLINE

Ecological Monitoring and Performance AssessmentThe contract involves conducting extensive, long-term field monitoring focused on evaluating the effectiveness of ecological restoration efforts. Key activities include tracking changes in vegetation, biodiversity, and hydrologic function to determine the success of restoration projects over time. This work falls under the NAICS code 541620, which pertains to environmental consulting services, and is being issued by the Department of Defense, specifically under the W072 Endist Chicago office. As a subcontract opportunity, the contract supports ongoing ecological assessment initiatives that aim to ensure restoration goals are met by providing scientifically rigorous data on ecosystem recovery. Although details such as the exact location and point of contact are not specified, the contract emphasizes performance assessment through comprehensive environmental monitoring, critical for informing adaptive management and future restoration efforts. The contract was posted in late April 2026, reflecting a proactive approach to environmental stewardship by the Department of Defense.

Environmental Consulting Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS