Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Utility Feed Transformer Manufacturer/Supplier

Active

Federal

Response Deadline11/05/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and delivery of two new operational replacement transformers for prime contractors working on USACE Endist Chicago projects. The required units must be three-phase, 60 Hz, Delta-Wye transformers with a capacity of 4,000/5,000 kVA, featuring a 13,200V primary and 480Y/277V secondary voltage. Strict environmental and technical specifications apply, including the use of biobased dielectric insulating fluid containing at least 95 percent biobased content and EPA CPG recovered materials for the enclosures. Additionally, the supplier must provide PCB Certification ensuring levels are below 1 PPM. The project falls under NAICS code 335311 and is associated with the Department of Defense.

General Info

Manufacture and deliver two biobased 4,000/5,000 kVA transformers for USACE Endist Chicago projects.

Agency

Department Of Defense → W072 Endist Chicago

NAICS

335311 - Power, Distribution, and Specialty Transformer Manufacturing

Place of Performance

IL, 60441

Set-Aside

NONE

Documents

This scope was carved out of W912P627SSA001.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CSSC Utility Feed Transformer Replacement

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 26

subcontract

Response DeadlineNov 5

Submission deadline

Response Deadline

11/05/2026, 07:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W072 Endist Chicago

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → W072 Endist Chicago

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies two new operational replacement transformers for prime contractors on USACE Endist Chicago projects. Manufactures and delivers 4,000/5,000 kVA, 13,200V primary, 480Y/277V secondary, three-phase, 60 Hz, Delta-Wye units. Uses biobased dielectric insulating fluid (>=95% biobased) and EPA CPG recovered materials for enclosures. Requires PCB Certification (<1 PPM). Delivers two fully manufactured transformers.

Similar Contracts

Same NAICS industry code

Olsun Electrics 225kVA Cast Coil Transformer SupplierThis subcontract through the General Services Administration involves the procurement of one Olsun Electrics 225kVA Cast Coil Transformer intended for prime contractors on GSA projects. The equipment is specified as a copper wound, dry type padmount transformer for unit Pad B4-PS4-T62 with a 12kV-208Y/120 Delta-Wye configuration. It must feature a 316 Stainless Steel enclosure finished in Munsell Green paint. The project is located in San Diego, California, and requires strict adherence to the Buy American Act and the Nonmanufacturer Rule. Interested parties must submit responses by December 7, 2026, to provide one fully configured unit meeting all technical and regulatory specifications.

Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Specialized Power Supply Unit (PSU) Repair and OverhaulThis subcontract involves the technical repair and functional restoration of power supply units for prime contractors supporting NAVSUP Weapon Systems Support Mech projects. The scope of work requires the repair of units in strict accordance with Technical Data Package Version O03 and CAGE 06179 requirements. Additionally, all units must be marked according to MIL-STD-130, REV N and packaged following MIL-STD-2073-1 standards to ensure full compliance and deliverability. The project necessitates the use of specialized electronic testing and repair tooling specifically designed for high-wattage supplies. The final deliverable consists of fully repaired, tested, and marked power supply units. This opportunity falls under NAICS code 335311 and is managed by the Department of Defense, with a response deadline set for November 24, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

Filtered Power Distribution & RF FeedthroughsThis subcontract, managed by the Department of Defense under agency W6QK Acc-Apg, involves the supply of specialized electrical components for Army Headquarters Department of Army G-3/5/7 projects. The scope of work focuses on providing prime contractors with high-performance EMI/RFI filtered power strips, RF-tight wall penetrations, and RF-tight feedthrough penetration flanges. Key hardware includes NEMA 5-15R receptacles equipped with surge suppression and the delivery of two filtered power distribution units. To ensure operational integrity, the contract mandates rigorous pre-shipment electrical and shielding continuity testing for all supplied equipment. The project falls under NAICS code 335311 and is designated for performance in the 77416 area. Interested parties should note the tight response window following the October 26, 2026, posting date.

POSTED

about 8 hours ago

DEADLINE

Supply of F500KVA TransformerThis subcontract agreement involves the supply of one F500KVA transformer for prime contractors working on projects for the Oil & Gas Development Company Limited in Pakistan. The selected provider is responsible for the entire lifecycle of the equipment, including manufacturing or sourcing the unit, conducting rigorous quality assurance and testing to meet industrial standards, and managing all packaging and delivery logistics to the designated site. The contract requires strict adherence to the Public Procurement Regulatory Authority rules to ensure compliance with regional procurement standards. Interested parties must submit their responses by November 12, 2026, as part of the solicitation process managed by the Oil & Gas Development Company Limited.

Oil & Gas Development Company Limited (OGDCL)

POSTED

about 12 hours ago

DEADLINE

Air Core Reactor SupplierThis subcontract agreement appoints a supplier to provide three air core reactors for prime contractors working on Nebraska Public Power District substation projects. The supplier is responsible for manufacturing the units to specific technical requirements of 8.314kv, 802a, and 6667kva, which must include all necessary insulators and associated pedestals. The contractor must ensure all equipment complies with established industry electrical standards and provide the required Material Safety Data Sheets. The scope of work concludes with the delivery of three complete air core reactor units to the York Operations Center warehouse.

Nebraska Public Power District

POSTED

about 22 hours ago

DEADLINE

Air Core Reactors, Wayside Substation

Solicitation # 26093

Nebraska Public Power District is soliciting total fixed price quotes for the purchase of three air core reactors for the Wayside 230kV Substation reactor banks 1302. The required hardware must be 8.314kv, 802a, 6667kva, including pedestals and insulators, and must be manufactured in accordance with District engineering specification 196gs100. Equipment must be designed to mount on foundation drawing 492038389 with spacing as existing on 493038395 ver ab. All drawings for approval and final versions must be submitted electronically. Quotes are due by October 31, 2026, and must include lead times and total freight costs for delivery to the York Operations Center in York, Nebraska. Delivery must be scheduled 24 to 48 hours in advance, with title and risk transferring upon unloading at the destination. Award will be based on the best evaluated quote, considering factors such as material quality, bidder financial responsibility, experience with the District, and acceptance of payment terms, which are Net 30 via ACH or Direct Deposit. The procurement is governed by the District's standard terms and conditions or an existing General Services Agreement.

Nebraska Public Power District

POSTED

about 22 hours ago

DEADLINE

Power Supply Unit Supplier (NSN 6120-01-619-9136)This subcontract involves the procurement or manufacture of 13 power supply units matching NSN 6120-01-619-9136 to support prime contractors for the DLA Weapons Support Maritime Supply Chain. The project requires strict adherence to the DLA Master List of Technical and Quality Requirements, with specific packaging and palletizing standards following ASTM D3951 and RP001. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 335311 for the Department of Defense. Performance will take place in Tracy, California, with a response deadline set for November 5, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Engine Accessory Generators (NSN 2920-01-538-9533)This subcontract involves the sourcing and manufacture of seven Engine Accessory Generators, specifically Part Number 106A0363 under NSN 2920-01-538-9533. The contractor is responsible for providing these components to prime contractors supporting the DLA Weapons Support Land Supplier Opns Engines. All items must be delivered to DLA Dist San Joaquin in Tracy, California. The contractor must ensure strict adherence to the DLA Master List of Technical and Quality Requirements. Packaging and marking are mandated according to ASTM D3951, RP001, and MIL-STD-129 standards. This procurement falls under NAICS code 335311 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Supply of Power Transformer (NSN 5950012579615)This subcontract involves the manufacture or sourcing of a Power Transformer matching NSN 5950012579615 for the Department of Defense, specifically the DLA Weapons Support ASC Supplier Order OEM Division. The selected provider must ensure the equipment complies with the DLA Master List of Technical and Quality Requirements and is responsible for the physical delivery of the transformer to Tinker AFB. Eligible contractors must possess a valid UEI and CAGE code and are required to disclose any non-domestic material sourcing. The opportunity is categorized under NAICS code 335311, with a response deadline set for November 2, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Power Supply Unit Supplier (NSN 6120-01-659-7633)This subcontract involves the procurement of 2,000 power supply units, specifically NSN 6120-01-659-7633, to support prime contractors under the Defense Logistics Agency Weapons Support Maritime Supply Chain. The units must be Birdon America Inc 6KT72 P/N 10001273 and must strictly adhere to the DLA Master List of Technical and Quality Requirements RA001. All shipments are to be delivered FOB Origin and must comply with MIL-STD-129 and MIL-STD-2073-1E for packaging and marking. The contract falls under NAICS code 335311 and requires full compliance with the Buy American Act as specified in DFARS 252.225-7001. Performance will take place in New Cumberland, Pennsylvania. Interested parties must note the response deadline of November 5, 2026, to ensure all submission requirements are met for this Department of Defense requirement.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Current Transformer Manufacturer/SupplierThis subcontract opportunity is for the manufacture or sourcing of seven current transformers to support prime contractors delivering on DLA supply contracts. The selected supplier must ensure all units are packaged according to MIL-STD-2073-1E and RP001 and marked in compliance with MIL-STD-129. Final delivery is required at the designated destination in Tracy, California, where the items will undergo inspection and acceptance. Eligible bidders must be registered in the System for Award Management and possess a valid CAGE code. This requirement is issued by the Department of Defense under the DLA Weapons Support Active Devices Division, falling under NAICS code 335311. Responses are due by November 5, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Alternating Current Motors (P/N MR1032)This subcontract, issued by the DLA Weapons Support Maritime Supply Chain under the Department of Defense, involves the procurement or manufacture of two alternating current motors with part number MR1032. The motors must strictly adhere to MIL SPEC INC 57368 specifications, DLA Technical and Quality Requirements, and NIST SP 800-171 DOD Assessment Requirements for the handling of controlled unclassified information. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 335311, with performance taking place in New Cumberland. Interested parties must respond by November 5, 2026, to provide these components for prime contractors fulfilling DLA supply contracts.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → W072 Endist Chicago

Same awarding agency

Environmental Disposal ServicesThis subcontract for Environmental Disposal Services supports prime contractors on USACE Endist Chicago projects under the Department of Defense. The scope of work involves the lawful removal and disposal of old transformers and insulating fluids, utilizing vacuum trucks for the drainage and collection of materials. All hazardous and industrial waste must be transported to approved facilities in accordance with strict safety and environmental regulations. To qualify, service providers must hold EPA-approved waste hauler and disposal certifications. The contractor is responsible for providing all necessary documentation upon completion, including disposal manifests and certificates of destruction or disposal. This opportunity falls under NAICS code 562910 and is centered in the 60441 zip code area.

Remediation Services

POSTED

about 8 hours ago

DEADLINE

Heavy Equipment Rigging and TransportationThis subcontract for Heavy Equipment Rigging and Transportation supports prime contractors on USACE Endist Chicago projects under the Department of Defense. The scope of work involves the physical removal and precision placement of transformers weighing approximately 13.8 tons each. Responsibilities include rigging and lifting existing units, transporting them from delivery points to designated concrete pads, and ensuring the safe installation of new units. To execute these tasks, the contractor must provide heavy-duty cranes and certified rigging and hoisting operators. The project is categorized under NAICS code 488410 and is performed in the 60441 zip code area. The response deadline for this opportunity is November 5, 2026.

Motor Vehicle Towing

POSTED

about 8 hours ago

DEADLINE

NETA Certified Testing AgencyThis subcontract opportunity with the Department of Defense, specifically for W072 Endist Chicago, requires a NETA Certified Testing Agency to perform pre-energization electrical acceptance testing for prime contractors. The selected agency will be responsible for conducting comprehensive safety and operational tests using specialized equipment, including high-voltage testers, insulation resistance testers, and TTR meters. All work must be performed in strict accordance with NETA ATS and IEEE C57 standards to ensure full compliance and operational safety. The contractor is expected to deliver certified electrical acceptance test reports and provide final commissioning sign-off. This project falls under NAICS code 541380 and is located in the 60441 zip code area. Interested parties must submit their responses by the deadline of November 5, 2026.

Testing Laboratories and Services

POSTED

about 8 hours ago

DEADLINE

Medium-Voltage Electrical ContractorThis subcontract opportunity for a Medium-Voltage Electrical Contractor involves providing electrical isolation, installation, and commissioning services for prime contractors on USACE Endist Chicago projects. The scope of work includes executing lockout-tagout procedures, disconnecting existing transformers, and installing new units into existing cabling and switchgear, ensuring all systems are properly grounded and bonded to deliver a fully energized transformer system. The project falls under NAICS code 238210 and requires strict adherence to USACE EM 385-1-1 and NFPA 70E safety standards. Performance will take place in the 60441 zip code area for the Department of Defense. Interested parties must submit their responses by November 5, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 8 hours ago

DEADLINE

CSSC Utility Feed Transformer Replacement

Solicitation # W912P627SSA001

The U.S. Army Corps of Engineers Chicago District is conducting market research via Sources Sought Notice W912P627SSA001 to identify qualified contractors for the CSSC Utility Feed Transformer Replacement project. Located at the Chicago Sanitary and Ship Canal Fish Dispersal Barrier facility in Lockport, Illinois, the project requires the turnkey removal and disposal of two existing utility feed transformers and the installation, testing, and commissioning of two new operational replacements. The new units must have a capacity of 4,000/5,000 kVA, a primary voltage of 13,200 volts, and a secondary voltage of 480Y/277 volts in a three-phase, 60 Hz, Delta-Wye configuration. The contractor will be responsible for all labor, materials, rigging, and supervision, while reusing existing concrete pads, cabling, and switchgear. The anticipated period of performance is 365 calendar days from the Notice to Proceed. This is not a formal request for proposals or quotes, but a capability assessment to determine the availability of small businesses under NAICS code 237130. Key requirements for interested firms include a proven track record with medium-voltage electrical systems, compliance with USACE EM 385-1-1 and NFPA 70E safety standards, and the ability to meet strict procurement lead times. Responses must be submitted by November 5, 2026, and include a technical capability statement, project examples, and documentation of bonding limits. Firms must also specify their ability to satisfy limitations on subcontracting per FAR 52.219-14.

Power and Communication Line and Related Structures Construction

POSTED

about 8 hours ago

DEADLINE

High Voltage Power Supplies (HVPS) for Electronic Fish Barriers

Solicitation # W912P627MR569570

The U.S. Army Corps of Engineers, Chicago District, is conducting market research to identify capable providers for six high voltage power supplies to support the Electric Dispersal Barrier System near Romeoville, Illinois. The requirement includes four 1.5 megawatt units and two 350 kilowatt units designed to protect the Great Lakes from invasive species. The selected contractor will be responsible for engineering, site verification, design, fabrication, factory acceptance testing, training, and delivery. This effort is being restructured to eliminate previous storage requirements to encourage more competitive bidding. The government is seeking a firm-fixed-price contract with an estimated one-year period of performance for manufacture and delivery. Potential respondents must demonstrate technical expertise in copper-wound transformers, harmonic reduction, and integration with existing pulse generating units. Interested parties must submit a capabilities statement by November 4, 2026, detailing their organizational size, relevant project experience, and ability to meet specific technical and safety standards. Based on the responses, the procurement may be set aside for small businesses or opened for full competition.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Section 219 Chesterton Interceptor Rehab

Solicitation # W912P627RA003

The United States Army Corps of Engineers Chicago District is issuing a pre-solicitation notice for the Section 219 Chesterton Interceptor Rehab project in Chesterton, Indiana. The project involves relining approximately 3,217 linear feet of a 48-inch trunk sewer with a 42-inch slipliner pipe, consisting of 2,368 linear feet of base work and 849 linear feet of option work. Required services include sewer cleaning, televising, sliplining, annulus grouting, lateral reinstatement, and the use of specialized insertion pits, all while maintaining traffic and erosion control. All personnel must be certified in accordance with EM 385-1-1 safety standards. This acquisition is reserved exclusively for small business concerns under NAICS code 237990, with an estimated construction cost between 1 million and 5 million dollars. The solicitation package is expected to be advertised in November 2026 and will be available exclusively through the Procurement Integrated Enterprise Environment system. Interested contractors must be registered in the System for Award Management at the time of proposal submission to be eligible for award.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

PRESOLICITATION NOTICE FOR GATE HOIST MACHINERY PAINTING AND HOIST HOUSE REHABILITATION FOR FOX RIVER DAMS, WISCONSIN

Solicitation # W912P626BA026

The U.S. Army Corps of Engineers Chicago District is preparing to solicit a contract for the repainting of gate hoisting machinery and the rehabilitation of hoist houses across nine dams on the Fox River in Wisconsin, including Kaukauna, Little Chute, Cedars, Appleton Lower, Menasha, Appleton Upper, DePere, Little Kaukauna, and Rapid Croche Dams. The scope of work includes surface preparation and painting of all gate hoisting equipment as well as comprehensive structural upgrades to each hoist house such as replacing shingle roofing with metallic sheet roofing, installing heavy duty commercial doors with modified framing, swapping exterior vinyl siding for galvalume, renewing soffit and fascia, and adding insulation to ceiling and wall cavities. All work must comply with USACE EM 385-1-1 safety and construction standards, and the contract will be executed under a single-year performance period beginning after award. This acquisition is strictly reserved for small business concerns as defined by the North American Industry Classification System code 236220, with a size standard of $45 million in annual receipts. Interested vendors must be actively registered in the System for Award Management (SAM) at the time of proposal submission and must also register in the DoD’s Procurement Integrated Enterprise Environment (PIEE) system to access the official solicitation, which will be released in the fourth quarter of fiscal year 2026. Proposals submitted via telephone, fax, or email will not be accepted. All correspondence must reference the solicitation number W912P626BA026, and inquiries should be directed to the primary point of contact, Ericka Hillard. Contractors are encouraged to review the USACE Contract Changes Playbook for guidance on equitable adjustments and change order processes under the contract.

Commercial and Institutional Building Construction

POSTED

DEADLINE

Construction Materials Supply (Soil, Mulch, Erosion Control)This contract involves the supply of essential construction materials including clean fill, mulch, erosion control blankets, and other items necessary for earthwork and vegetation installation projects. It is a subcontract managed by the Department of Defense, specifically under the W072 Endist Chicago office. The contract falls under the NAICS code 423310, which covers construction materials supply. The contract was posted on April 22, 2026, and aims to provide materials that support soil stabilization, landscaping, and erosion prevention activities. While specific details such as location, set-aside status, and point of contact are not provided, the scope emphasizes delivering reliable construction supplies critical for effective earthwork and environmental management efforts.

Lumber, Plywood, Millwork, and Wood Panel Merchant Wholesalers

POSTED

DEADLINE

Surveying and Site MappingThe contract involves conducting detailed topographic and boundary surveys specifically aimed at supporting construction activities in wetland areas. The surveys will provide essential data for construction layout, grading, and tracking project progress, ensuring accurate and efficient site development. The scope includes both the measurement of natural and man-made features to guide various phases of the construction process. This subcontract, titled "Surveying and Site Mapping," was posted on April 22, 2026, under the NAICS code 541370, indicating specialized surveying and mapping services. It is managed by the Department of Defense through an entity referred to as W072 Endist Chicago. While specific location details and points of contact were not provided, the contract supports project execution in previously undefined wetland areas, emphasizing the critical role of precise environmental and boundary data in complex site conditions.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

Hydraulic and Hydrologic Modeling SupportThis contract involves providing hydraulic and hydrologic modeling support specifically using HEC-RAS software to assist in the design process and to validate the restoration of hydrologic functions within an aquatic ecosystem. The work is aimed at ensuring that the restored ecosystem functions effectively and meets the intended environmental and engineering requirements. The contract is a subcontract under the Department of Defense's W072 Endist Chicago office, associated with NAICS code 541330, which pertains to engineering services. Although certain details such as solicitation number, place of performance, and point of contact are not specified, the primary focus is clearly on specialized technical modeling to support ecosystem restoration projects.

Engineering Services

POSTED

DEADLINE

Ecological Monitoring and Performance AssessmentThe contract involves conducting extensive, long-term field monitoring focused on evaluating the effectiveness of ecological restoration efforts. Key activities include tracking changes in vegetation, biodiversity, and hydrologic function to determine the success of restoration projects over time. This work falls under the NAICS code 541620, which pertains to environmental consulting services, and is being issued by the Department of Defense, specifically under the W072 Endist Chicago office. As a subcontract opportunity, the contract supports ongoing ecological assessment initiatives that aim to ensure restoration goals are met by providing scientifically rigorous data on ecosystem recovery. Although details such as the exact location and point of contact are not specified, the contract emphasizes performance assessment through comprehensive environmental monitoring, critical for informing adaptive management and future restoration efforts. The contract was posted in late April 2026, reflecting a proactive approach to environmental stewardship by the Department of Defense.

Environmental Consulting Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS